Search NASA⌕ Search

SEARCH · Search NASA

Results for “structural analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Optical properties of PrAlO{sub 3} nano ceramic

Nano crystals of PrAlO{sub 3} ceramic are prepared by the modified combustion technique. The structural analysis of the as prepared powder is done using the X-ray diffraction technique, shows that the compound possesses rhombohedral structure with R3c space group. The lattice constants are a=b=5.332Åand c=12.97Å. The crystallite size determined from the XRD and the TEM image is,33nm and 35nm respectively. The FT-IR spectral analysisconfirms the phase purity of the prepared sample. The UV-Vis absorption spectrum shows main peaks in the wavelength range 440–490 nm. The optical band gap determined from the Tauc’s plot is 4.67eV. Photoluminescence spectrum obtained at the excitation wavelength 370 nm of sample is also recorded and analyzed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Room temperature neutron diffraction and magnetic studies of multiferroic Pb{sub 0.9}Bi{sub 0.1}Fe{sub 0.55}Nb{sub 0.45}O{sub 3} solid solution

The Pb{sub 0.9}Bi{sub 0.1}Fe{sub 0.55}Nb{sub 0.45}O{sub 3} (PBFNO) solid solution was synthesized by single step solid state reaction method and the optimized parameters are 700°C for 2hr (calcination) and 800°C for 3hr (sintering). The formation of desired material was confirmed using X-Ray Diffraction (XRD) and Neutron Diffraction (ND) studies. The structural and magnetic properties of the sintered pellets were investigated at room temperature (RT) through XRD, ND and Magnetic (M-H) studies. The structural analysis was carried out by Rietveld refinement through the Full Prof program. Rietveld refined XRD and ND patterns confirms the monoclinic structure with Cm space group and obtained cell parameters from the ND data are a = 5.651(2) Å, b = 5.658(2) Å, c = 4.005(1) Å and α = 90°, β = 89.98(1)°, γ = 90°. RT M-H curve studies have been carried out. It shows the clear opening of hysteresis (M–H) loop, is evidenced as the existence of weak ferromagnetism at RT. The M-H data shows existence weak ferromagnetism embedded in an antiferromagnetic matrix structure. The dielectric constant with frequency shows the formation of barrier layers at the grain and grain boundary interfaces gives rise to interfacial space charge polarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

INVOLVED IN DE NOVO 2-containing complex involved in RNA-directed DNA methylation in Arabidopsis

At least three pathways control maintenance of DNA cytosine methylation in Arabidopsis thaliana. However, the RNA-directed DNA methylation (RdDM) pathway is solely responsible for establishment of this silencing mark. We previously described INVOLVED IN DE NOVO 2 (IDN2) as being an RNA-binding RdDM component that is required for DNA methylation establishment. In this study, we describe the discovery of two partially redundant proteins that are paralogous to IDN2 and that form a stable complex with IDN2 in vivo. Null mutations in both genes, termed IDN2-LIKE 1 and IDN2-LIKE 2 (IDNL1 and IDNL2), result in a phenotype that mirrors, but does not further enhance, the idn2 mutant phenotype. Genetic analysis suggests that this complex acts in a step in the downstream portion of the RdDM pathway. We also have performed structural analysis showing that the IDN2 XS domain adopts an RNA recognition motif (RRM) fold. Finally, genome-wide DNA methylation and expression analysis confirms the placement of the IDN proteins in an RdDM pathway that affects DNA methylation and transcriptional control at many sites in the genome. Results from this study identify and describe two unique components of the RdDM machinery, adding to our understanding of DNA methylation control in the Arabidopsis genome.

59 BASIC BIOLOGICAL SCIENCES↗

Dynamic interactions of proteins in complex networks

Recent advances in techniques such as NMR and EPR spectroscopy have enabled the elucidation of how proteins undergo structural changes to act in concert in complex networks. The three minireviews in this series highlight current findings and the capabilities of new methodologies for unraveling the dynamic changes controlling diverse cellular functions. They represent a sampling of the cutting-edge research presented at the 17th Meeting of Methods in Protein Structure Analysis, MPSA2008, in Sapporo, Japan, 26-29 August, 2008 (http://www.iapsap.bnl.gov). The first minireview, by Christensen and Klevit, reports on a structure-based yeast two-hybrid method for identifying E2 ubiquitin-conjugating enzymes that interact with the E3 BRCA1/BARD1 heterodimer ligase to generate either mono- or polyubiquitinated products. This method demonstrated for the first time that the BRCA1/BARD1 E3 can interact with 10 different E2 enzymes. Interestingly, the interaction with multiple E2 enzymes displayed unique ubiquitin-transfer properties, a feature expected to be common among other RING and U-box E3s. Further characterization of new E3 ligases and the E2 enzymes that interact with them will greatly enhance our understanding of ubiquitin transfer and facilitate studies of roles of ubiquitin and ubiquitin-like proteins in protein processing and trafficking. Stein et al., in the second minireview, describe recent progress in defining the binding specificity of different peptide-binding domains. The authors clearly point out that transient peptide interactions mediated by both post-translational modifications and disordered regions ensure a high level of specificity. They postulate that a regulatory code may dictate the number of combinations of domains and post-translational modifications needed to achieve the required level of interaction specificity. Moreover, recognition alone is not enough to obtain a stable complex, especially in a complex cellular environment. Increasing evidence indicates that disordered domains can acquire structural features that modulate the binding and strength of the signaling cascade. Whereas the first two minireviews describe ways in which protein interactions are modulated, the third, by Tompa, focuses on the importance of protein disorder in a subset of amyloid proteins. It is apparent that within this group, part of the polypeptide chain remains disordered during amyloid formation. Moreover, the disordered segments have different amino acid composition and physicochemical characteristics, which suggests that they may play a role in amyloid stability. The disordered region may serve as a linker to connect the ordered core and a globular domain, maintaining the stability and structure of the globular domain and minimizing protein refolding upon amyloid formation. As techniques in protein chemistry advance, we are learning more and more about the mechanisms that regulate and are regulated by protein interactions. The three minireviews in this series offer a glimpse of the complex dynamics fundamental to protein-protein interactions. In the future, we expect that the knowledge gained will help to augment our ability to control complex pathologies and treat diverse diseases states.

59 BASIC BIOLOGICAL SCIENCES↗

New mechanism of structuring associated with the quasi-merohedral twinning by an example of Ca{sub 1–x}La{sub x}F{sub 2+x} ordered solid solutions

Merohedry is considered an inseparable property of atomic structures, and uses for the refinement of structural data in a process of correct determination of structure of compounds. Transformation of faulty structures stimulated by decreasing of systemic cumulative energy leads to generation of merohedral twinning type. Ordering is accompanied by origin of antiphase domains. If ordering belongs to the CuAu type, it is accompanied by tetragonal distortions along different (100) directions. If a crystal consists of mosaic of nanodimensional antiphase domains, the conjugation of antiphase domains with different tetragonality leads to monoclinic distortions, at that, conjugated domains are distorted mirrorly. Similar system undergoes further transformation by means of quasi-merohedral twinning. As a result of quasi-merohedry, straight-lines of lattices with different monoclinic distortions are transformed into coherent lattice broken-lines providing minimization of the cumulative energy. Structuring is controlled by regularities of the self-organization. However stochasticity of ordering predetermines the origin areas where few domains with different tetragonality contact which leads to the origin of faulty fields braking regular passage of structuring. Resulting crystal has been found structurally non-uniform, furthermore structural non-uniformity permits identifying elements and stages of a process. However there is no precondition preventing arising the origin of homogenous states. Effect has been revealed in Ca{sub 1–x}La{sub x}F{sub 2+x} solid solution, but it can be expected that distortions of regular alternation of ions similar to antiphase domains can be obtained in non-equilibrium conditions in compounds and similar effect of the quasi-merohedry can falsify results of structural analysis.

36 MATERIALS SCIENCE↗

Uncertainty Quantification and Sensitivity Analysis for Simulation of Hostile Blast Events [Slides]

A mesh convergence study shows that shock arrival times converge for basic flow shots. Sensitivity study reveals a surprisingly high sensitivity to the placement of the HE package. Bayesian inference tools used on the experimental datasets suggest this is a real effect. Sensitivity analysis of ambient conditions such as temperature and pressure reveal minimal effect. Porting of pressure data from QUINOA simulations to perform structural analysis on the aeroshell geometry was successful, and shows a strong dependence of payload response to the angle of attack.

42 ENGINEERING↗

Towards an improved understanding of the influence of subpixel vegetation structure on pixel-level spectra: a simulation approach

The planned NASA Hyperspectral Infrared Imager (HyspIRI) mission, equipped with an imaging spectrometer that has the capability of monitoring ecosystems globally, will provide an unprecedented opportunity to address scientific challenges related to ecosystem function and change. However, uncertainty remains around the impact of subpixel vegetation structure, in combination with the point spread function, on pixel-level imaging spectroscopy data. We estimated structural parameters, e.g., leaf area index (LAI), canopy cover, and tree location, from HyspIRI spectral data, with the goal of assessing how subpixel variation in these parameters impact pixel-level imaging spectroscopy data. The fine-scale variability of real vegetation structure makes this a challenging endeavor. Therefore, we utilized a simulation-based approach to counter the time-consuming and often destructive sampling needs of vegetation structural analysis and to simultaneously generate synthetic HyspIRI data pre-launch. Three virtual scenes were constructed, corresponding to the actual vegetation structure in the National Ecological Observatory Network’s (NEON) Pacific Southwest Domain (Fresno, CA). These included an oak savanna, a dense coniferous forest, and a conifer-manzanita-mixed forest. Simulated spectroscopy data for these scenes were then generated using the Digital Imaging and Remote Sensing Image Generation (DIRSIG) model. Simulations first were used to verify the physical model, virtual scene geometrical information, and simulation parameters. This was followed by simulations of HyspIRI data, where within-pixel structural variability was introduced, e.g., by iteratively changing per-pixel canopy cover and tree placement, tree clustering, leaf area index (LAI), etc., between simulation runs for the virtual scenes. Finally, narrow-band vegetation indices (VIs) were extracted from the data in an attempt to describe the variability of the subpixel structural parameters; this was done in order to assess VI robustness to changes in structural “levels”, as well as placement of trees/canopies within the instrument’s instantaneous field-of-view (IFOV). Our ultimate goal is not only to better understand how such subpixel variability influence imaging spectroscopy outputs, but also to better estimate vegetation structural parameters using spectra. We constructed regression models for LAI (R2 = 0.92) and canopy cover (R2 = 0.97) with narrow-band VIs via this simulation approach. Our models ultimately are intended to improve the HyspIRI mission’s ability to monitor global vegetation structure.

Van Aardt, Jan↗

Enhanced Photocatalytic Degradation of Methylene Blue Dye, Opto-magnetic and Antibacterial Behaviour of Pure and La-doped ZnO Nanoparticles

The different doping concentrations of lanthanum (La)-doped ZnO nanoparticles were synthesized successfully using zinc acetate and lanthanum nitrate via wet chemical method. Characterization of the prepared sample was done by standard analytical techniques such as powder x-ray diffraction analysis (P-XRD), high-resolution scanning electron microscopy (HR-SEM), energy-dispersive spectroscopy (EDS), Fourier transformer-infrared (FT-IR) spectroscopy, photoluminescence (PL) and UV-Vis spectroscopy (UV-Vis), and magnetic studies (VSM). The structural analysis has been carried out by powder x-ray diffraction. X-ray diffraction studies revealed that the nanoparticles are well-crystalline and possess hexagonal wurtzite structure. HR-SEM images showed the homogenous spherical-shaped morphology of the synthesized ZnO nanoparticles. EDS analysis confirmed the presence of La ions into ZnO lattice. The band gap (Eg) energy was determined by UV-Visible spectral data, and it was found that the Eg value decreases with increasing the La concentration into ZnO lattice. PL spectra confirmed that the effective La doping enhance the UV and visible region near band gap emission. The effect of La doping on the photocatalytic activity of ZnO nanoparticles for the degradation of methylene blue dye was studied under solar illumination and the results showed that the La doping kindles appreciable degradation of MB. The optical density measurements of the ZnO nanoparticles against both gram-positive (Bacillus subtilis, Staphylococcus aureus) as well as gram-negative bacteria (Proteus mirabilis, Salmonella typhi) showed better bacterial activity than pure ZnO. Moreover, it showed that higher dopant La in ZnO exhibit efficient antibacterial activity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray investigation of lateral hetero-structures of inversion domains in LiNbO{sub 3}, KTiOPO{sub 4} and KTiOAsO{sub 4}

Periodically-poled ferroelectric crystals are studied by observing their superlattice (grating) diffraction profiles with high-resolution X-ray diffraction. In order to successfully model the data, the effects of strain, and sample and beam coherence, must be taken into account. In this paper periodically domain-inverted (PDI) ferroelectric crystals are studied using high-resolution X-ray diffraction. Rocking curves and reciprocal-space maps of the principal symmetric Bragg reflections in LiNbO{sub 3} (LN) (Λ = 5 µm), KTiOPO{sub 4} (KTP) (Λ = 9 µm) and KTiOAsO{sub 4} (KTA) (Λ = 39 µm) are presented. For all the samples strong satellite reflections were observed as a consequence of the PDI structure. Analysis of the satellites showed that they were caused by a combination of coherent and incoherent scattering between the adjacent domains. Whilst the satellites contained phase information regarding the structure of the domain wall, this information could not be rigorously extracted without a priori knowledge of the twinning mechanism. Analysis of the profiles reveals strain distributions of Δd/d = 1.6 × 10{sup −4} and 2.0 × 10{sup −4} perpendicular to domain walls in KTP and LN samples, respectively, and lateral correlation lengths of 63 µm (KTP), 194 µm (KTA) and 10 µm (LN). The decay of crystal truncation rods in LN and KTP was found to support the occurrence of surface corrugations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural, microstructural and thermal properties of lead-free bismuth–sodium–barium–titanate piezoceramics synthesized by mechanical alloying

Graphical abstract: Mechano-synthesis of lead-free (Bi{sub 0.5}Na{sub 0.5}){sub 0.94}Ba{sub 0.06}TiO{sub 3} piezoceramics with nanocrystalline/amorphous structure and homogeneous composition: partial transformation of constituents to BNBT, BNT and pyrochlore, amorphous phase formation, mechano-crystallization of the amorphous, pyrochlore-to-perovskite BNBT phase transformation during the process. Display Omitted Highlights: ► Perovskite BNBT powders with homogeneous composition were synthesized by MA. ► Partial transformation of constituents to BNBT, BNT and pyrochlore occurred by MA. ► Formation of an amorphous phase and afterwards its crystallization occurred by MA. ► Pyrochlore-to-perovskite BNBT phase transformation occurred after prolong milling. ► Polymorphic transformations of TiO{sub 2} act as the main alloying impediment during MA. -- Abstract: Bismuth–sodium–barium–titanate piezoceramics with a composition of (Bi{sub 0.5}Na{sub 0.5}){sub 0.94}Ba{sub 0.06}TiO{sub 3} (BNBT) were prepared by mechanical alloying (MA). Structural analysis and phase identification were performed by X-ray diffraction (XRD). Microstructural studies and chemical composition homogeneity were performed by scanning electron microscope (SEM) coupled with energy dispersive X-ray analysis (EDX). Furthermore, thermal properties of the as-milled powders were evaluated by thermogravimetry/differential thermal analysis (TG/DTA). During the initial milling, the constituents were transformed to the perovskite, pyrochlore, and BNT phases; in addition, partial amorphization of the structure appeared during the milling cycle. As MA progressed, transformation of pyrochlore-to-perovskite and crystallization of the amorphous phase occurred and also, the BNBT phase was significantly developed. It was found that the MA process has the ability to synthesize the BNBT powders with a submicron particle size, regular morphology, and uniform elemental distribution.

36 MATERIALS SCIENCE↗

Explicit structural topology optimization using boundary element method‐based moving morphable void approach

Abstract This article presents an explicit topology optimization approach using boundary element method based moving morphable void (MMV). Structural analysis in the conventional MMV approach is performed on a fixed mesh over the entire design domain. However, in the proposed method structural boundaries are described using B‐splines and discretized with boundary elements making explicit representation of the boundaries possible. In this regard, the proposed approach has following merits: a) the use of weak material, which is often adopted to mimic voids can be completely avoided; b) exact and explicit description of voids in MMV allows the capture of tiny structural features in a robust and effective way; c) numerical instabilities stemming from the use of fixed meshes can be naturally avoided. Several numerical examples are provided to demonstrate the effectiveness of the proposed approach.

Zhang, Weisheng↗

Effect of Substrate Temperature on Structural, Morphological, Magnetic, and Electrical Properties of Fe{sub 2}CoSi Heusler Alloy Thin Films for Spin-Based Device Applications

Fe{sub 2}CoSi based Heusler alloy thin films are deposited on single crystal Si (111) substrate at different substrate temperatures varying from room temperature to 600 °C using ultrahigh vacuum DC magnetron sputtering. Structural analysis of the prepared thin films is carried out using GI-XRD measurement and it conform ordered L2{sub 1} crystal structure of the films deposited at 450 °C and above. The atomic force microscopic (AFM) images of Fe{sub 2}CoSi thin films exhibiting 3D-like growth on Si (111) substrate at varying temperatures. The magnetic property of the thin films is studied using vibrating sample magnetometer (VSM). At 450 °C of substrate temperature, the prepared thin film exhibits high saturation magnetization (M{sub s} = 948 emu/cc) and low coercivity (H{sub c} = 8 Oe). The self-energy magnetization of the film and its own field is very high, when the temperature of the substrate was maintained at 450 °C and switching field ratio for this film was obtained as ~ 0.9 due to its high crystallinity and atomic ordering. The electrical property of Fe{sub 2}CoSi thin film is investigated using four-probe technique and a positive magnetoresistive behavior was observed for thin film deposited at a substrate temperature of 450 °C which indicates the possible half-metallic nature at room temperature. The enhanced magnetic and electrical properties obtained for the thin film prepared at 450 °C substrate temperature is highly suitable for spin based device applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Neutron powder diffraction study of tetragonal Li{sub 7}La{sub 3}Hf{sub 2}O{sub 12} with the garnet-related type structure

We have successfully synthesized a polycrystalline sample of tetragonal garnet-related Li-ion conductor Li{sub 7}La{sub 3}Hf{sub 2}O{sub 12} by solid state reaction. The crystal structure is analyzed by the Rietveld method using neutron powder diffraction data. The structure analysis identifies that tetragonal Li{sub 7}La{sub 3}Hf{sub 2}O{sub 12} has the garnet-related type structure with a space group of I4{sub 1}/acd (no. 142). The lattice constants are a=13.106(2) A and c=12.630(2) A with a cell ratio of c/a=0.9637. The crystal structure of tetragonal Li{sub 7}La{sub 3}Hf{sub 2}O{sub 12} has the garnet-type framework structure composed of dodecahedral La(1)O{sub 8}, La(2)O{sub 8} and octahedral HfO{sub 6}. Li atoms occupy three types of crystallographic site in the interstices of this framework structure, where Li(1) atom is located at the tetrahedral 8a site, and Li(2) and Li(3) atoms are located at the distorted octahedral 16f and 32g sites, respectively. These Li sites are filled with the Li atom. The present tetragonal Li{sub 7}La{sub 3}Hf{sub 2}O{sub 12} sample exhibits bulk Li-ion conductivity of sigma{sub b}=9.85x10{sup -7} S cm{sup -1} and grain-boundary Li-ion conductivity of sigma{sub gb}=4.45x10{sup -7} S cm{sup -1} at 300 K. The activation energy is estimated to be E{sub a}=0.53 eV in the temperature range of 300-580 K. - Graphical abstract: The crystal structure of tetragonal Li{sub 7}La{sub 3}Hf{sub 2}O{sub 12} had the garnet-related type structure with a space group of I4{sub 1}/acd (no. 142) with the lattice constants of a=13.106(2) A and c=12.630(2) A. The tetragonal Li{sub 7}La{sub 3}Hf{sub 2}O{sub 12} had the fully ordered Li arrangement.

36 MATERIALS SCIENCE↗

Design and structural assessment of the Spallation Neutron Source 2.0 MW target

The Proton Power Upgrade (PPU) project is underway at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory. The project will double the proton accelerator power from 1.4 MW to 2.8 MW, increase power to the First Target Station (FTS), and enable a future Second Target Station (STS). The power increase partly comes from raising proton energy from 1.0 GeV to 1.3 GeV. The STS will operate at 0.7 MW at 15 Hz when completed. Until then, PPU will provide the capability to operate the FTS at 2.0 MW at 60 Hz. Maximum power at the FTS to date has been 1.4 MW at 60 Hz with 1.0 GeV protons. A new mercury target module design to operate reliably under PPU conditions has been completed after a multi-year effort. The design philosophy and assessment of the structural analysis are described here. This target underwent an unprecedented design and analysis process for SNS using the latest engineering techniques and incorporating years of operating lessons and outcomes from R&D to meet structural design criteria. Finally, it also incorporates high-flow gas injection to further mitigate pulse fatigue stresses as well as cavitation damage to the mercury vessel.

47 OTHER INSTRUMENTATION↗

Hydrothermal Synthesis and Characterization of Novel Brackebuschite-Type Transition Metal Vanadates: Ba 2 M(VO 4 ) 2 (OH), M = V 3+ , Mn 3+ , and Fe 3+ , with Interesting Jahn–Teller and Spin-Liquid Behavior

In a new series of transition metal vanadates, namely, Ba 2 M(VO 4 ) 2 (OH) (M = V 3+ , Mn 3+ , and Fe 3+ ), was synthesized as large single crystals hydrothermally in 5 M NaOH solution at 580 °C and 1 kbar. This new series of compounds is structurally reminiscent of the brackebuschite mineral type. The structure of Ba 2 V(VO 4 ) 2 (OH) is monoclinic in space group P2 1 /m, a = 7.8783(2) Å, b = 6.1369(1) Å, c = 9.1836(2) Å, β = 113.07(3)°, V = 408.51(2) Å 3 . Moreover, the other structures are similar and consist of one-dimensional trans edge-shared distorted octahedral chains running along the b-axis. The vanadate groups bridge across edges of their tetrahedra. Structural analysis of the Ba 2 Mn(VO 4 ) 2 (OH) analogue yielded a new understanding of the Jahn–Teller effect in this structure type. Raman and infrared spectra were investigated to observe the fundamental vanadate and hydroxide vibrational modes. Finally, single-crystal temperature-dependent magnetic studies on Ba 2 V(VO 4 ) 2 (OH) reveal a broad feature over a wide temperature range with maximum at ~100 K indicating that an energy gap could exist between the antiferromagnetic singlet ground state and excited triplet states, making it potentially of interest for quantum magnetism studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using a Coarse-Grained Modeling Framework to Identify Oligomeric Motifs with Tunable Secondary Structure

Coarse-grained modeling can be used to explore general theories that are independent of specific chemical detail. In this paper, we present cg_openmm, a Python-based simulation framework for modeling coarse-grained hetero-oligomers and screening them for structural and thermodynamic characteristics of cooperative secondary structures. cg_openmm facilitates the building of coarse-grained topology and random starting configurations, setup of GPU-accelerated replica exchange molecular dynamics simulations with the OpenMM software package, and features a suite of postprocessing thermodynamic and structural analysis tools. In particular, native contact analysis, heat capacity calculations, and free energy of folding calculations are used to identify and characterize cooperative folding transitions and stable secondary structures. In this work, we demonstrate the capabilities of cg_openmm on a simple 1–1 Lennard-Jones coarse-grained model, in which each residue contains 1 backbone and 1 side-chain bead. By scanning both nonbonded and bonded force-field parameter spaces at the coarse-grained level, we identify and characterize sets of parameters which result in the formation of stable helices through cooperative folding transitions. Furthermore, we show that the geometries and stabilities of these helices can be tuned by manipulating the force-field parameters.

36 MATERIALS SCIENCE↗

Butterfly deformation modes in a photoexcited pyrazolate-bridged Pt complex measured by time-resolved x-ray scattering in solution

Pyrazolate-bridged di-nuclear Pt complexes represent a series of molecules with tunable absorption and emission properties that can be directly modulated by structural factors, such as the Pt-Pt distance. However, direct experimental information regarding the structure of the emissive triplet excited state has remained scarce. Using time-resolved wide angle X-ray scattering (WAXS), the molecular structure of the triplet excited state for one of the complexes [Pt(ppy)(μ-tBu 2 pz)] 2 was obtained in a dilute (0.5 mM) toluene solution utilizing the monochromatic X-ray beamline 11IDD of the Advanced Photon Source. The excited state structural analysis was carried out based on the results from both transient WAXS measurements and DFT calculations to shed light on the primary structural changes, in particular the Pt-Pt distance and ligand rotation taking place following the photo-excitation of [Pt(ppy)(μ-tBu 2 pz)] 2 in toluene solution. We find that in the triplet excited state a pronounced contraction along the Pt-Pt axis has taken place accompanied by rotational motions of ppy ligands toward one another. Our results suggest that the contraction is larger than what has previously been reported, but are in good agreement with recent theoretical efforts and suggest the ppy moieties as targets for rational synthesis aimed at tuning the excited-state structure and properties

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Accelerating the Design of Solar Thermal Fuel Materials through High Throughput Simulations

Solar thermal fuels (STF) store the energy of sunlight, which can then be released later in the form of heat, offering an emission-free and renewable solution for both solar energy conversion and storage. However, this approach is currently limited by the lack of low-cost materials with high energy density and high stability. In this Letter, we present an ab initio high-throughput computational approach to accelerate the design process and allow for searches over a broad class of materials. The high-throughput screening platform we have developed can run through large numbers of molecules composed of earth-abundant elements and identifies possible metastable structures of a given material. Corresponding isomerization enthalpies associated with the metastable structures are then computed. Using this high-throughput simulation approach, we have discovered molecular structures with high isomerization enthalpies that have the potential to be new candidates for high-energy density STF. We have also discovered physical principles to guide further STF materials design through structural analysis. More broadly, our results illustrate the potential of using high-throughput ab initio simulations to design materials that undergo targeted structural transitions.

Liu, Y↗