Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface steps”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

Scanning tunneling microscopy of the atomically smooth (001) surface of vanadium pentoxide V{sub 2}O{sub 5} crystals

The (001) cleavage surface of vanadium pentoxide (V{sub 2}O{sub 5}) crystal has been studied by scanning tunneling spectroscopy (STM). It is shown that the surface is not reconstructed; the STM image allows geometric lattice parameters to be determined with high accuracy. The nanostructure formed on the (001) cleavage surface of crystal consists of atomically smooth steps with a height multiple of unit-cell parameter c = 4.37 Å. The V{sub 2}O{sub 5} crystal cleavages can be used as references in calibration of a scanning tunneling microscope under atmospheric conditions both along the (Ñ…, y) surface and normally to the sample surface (along the z axis). It is found that the terrace surface is not perfectly atomically smooth; its roughness is estimated to be ~0.5 Å. This circumstance may introduce an additional error into the microscope calibration along the z coordinate.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Beyond the Lambertian limit: Novel low-symmetry gratings for ultimate light trapping enhancement in next-generation photovoltaics

This project aims at addressing the efficiency limit and high fabrication cost of current light trapping methods by developing novel low-symmetry gratings (LSG) for next-generation thin c-Si photovoltaic (PV) cells. The LSG design achieves light trapping enhancement exceeding the 4n 2 Lambertian limit and can be fabricated over large areas using low-cost, single-step nanoimprint techniques. We further explored the use of deposited high-refractive-index glass materials for low-temperature LSG processing, which enables direct imprint sculpting of even complex grating geometries in glass without requiring an additional pattern transfer step, which minimizes processing cost and surface damage to PV cells. In the project, we have demonstrated fabrication and integration of sub-wavelength LSG with thin c-Si wafers and bifacial solar cells with low defect density. Optical absorption measurements indicate that LSGs demonstrated superior absorption enhancement compared to their traditional symmetric counterparts as predicted by our simulations. Efficiency enhancement was observed in solar cells integrated with LSGs although fabrication yield of the LSG-integrated cells remains a challenge

14 SOLAR ENERGY↗

A protocol for model intercomparison of impacts of marine cloud brightening climate intervention

A modeling protocol (defined by a series of climate model simulations with specified model output) is introduced. Studies using these simulations are designed to improve the understanding of climate impacts using a strategy for climate intervention (CI) known as marine cloud brightening (MCB) in specific regions; therefore, the protocol is called MCB-REG (where REG stands for region). The model simulations are not intended to assess consequences of a realistic MCB deployment intended to achieve specific climate targets but instead to expose responses to interventions in six regions with pervasive cloud systems that are often considered candidates for such a deployment. A calibration step involving simulations with fixed sea surface temperatures (SSTs) is first used to identify a common forcing, and then coupled simulations with forcing in individual regions and combinations of regions are used to examine climate impacts. Synthetic estimates constructed by superposing responses from simulations with forcing in individual regions are considered a means of approximating the climate impacts produced when MCB interventions are introduced in multiple regions. A few results comparing simulations from three modern climate models (CESM2, E3SMv2, and UKESM1) are used to illustrate the similarities and differences between model behavior and the utility of estimates of MCB climate responses that were synthesized by summing responses introduced in individual regions. Cloud responses to aerosol injections differ substantially between models (CESM2 clouds appear much more susceptible to aerosol emissions than the other models), but patterns in precipitation and surface temperature responses were similar when forcing is imposed with similar amplitudes in the same regions. A previously identified La Niña-like response to forcing introduced in the Southeast Pacific is evident in this study, but the amplitude of the response was shown to markedly differ across the three models. Other common response patterns were also found and are discussed. Forcing in the Southeast Atlantic consistently (across all three models) produces weaker global cooling than that in other regions, and the Southeast Pacific and South Pacific show the strongest cooling. This indicates that the efficiency of a given intervention depends on not only the susceptibility of the clouds to aerosol perturbations, but also the strength of the underlying radiative feedbacks and ocean responses operating within each region. These responses were generally robust across models, but more studies and an examination of responses with ensembles would be beneficial.

54 ENVIRONMENTAL SCIENCES↗

Diffusion welding

Dispersion-strengthened nickel alloys are sanded on one side and chemically polished. This is followed by a single-step welding process wherein the polished surfaces are forced into intimate contact at 1,400 F for one hour in a vacuum. Diffusion, recrystallization, and grain growth across the original weld interface are obtained during postheating at 2,150 F for two hours in hydrogen.

Holko, K. H.↗

Method for fabricating a mass spectrometer inlet leak

A method of fabricating an inlet leak for measuring chemically reactive gases is proposed. The method involves the steps of preparing a selected internal surface of a high melting point metal tubing for sealing to a glass tubing. A portion of the glass tubing is inserted into the prepared portion of the metal tubing, the glass tubing having an outer diameter substantially the same as the inner diameter of the metal tubing. The inserted glass tubing is sealed to the internal surface of the metal tubing; the glass tubing is drawn under a magnifying device to reduce the entire interior diameter thereof to substantially two microns; and an end portion of the drawing glass tubing is broken away.

Harris, R. F.↗

Thermochemical hydrogen production via a cycle using barium and sulfur - Reaction between barium sulfide and water

The reaction between barium sulfide and water, a reaction found in several sulfur based thermochemical cycles, was investigated kinetically at 653-866 C. Gaseous products were hydrogen and hydrogen sulfide. The rate determining step for hydrogen formation was a surface reaction between barium sulfide and water. An expression was derived for the rate of hydrogen formation.

Ota, K.↗

A model for unsteady transonic indicial responses

A method of characterizing the indicial curve for the response frequencies of flutter in the transonic regime by means of a time scale parameter is illustrated. Time linearization of the unsteady potential equation is assumed adequate and the perturbed potential about a steady flow is defined with appropriate boundary conditions. An indicial motion can then be obtained for a given mode, with the lift and drag coefficients which result from a step change in incidence or control surface deflection available to describe any kind of motion. The lift and drag coefficients are shown to result analytically by addition of the multiplicand involving the time scale parameter. If the coefficients are maximized, then at reduced frequencies only two parameters are necessary to form the indicial response curve.

Fung, K.-Y.↗

Parallel-processing with surface plasmons, a new strategy for converting the broad solar spectrum

A new strategy for efficient solar-energy conversion is based on parallel processing with surface plasmons: guided electromagnetic waves supported on thin films of common metals like aluminum or silver. The approach is unique in identifying a broadband carrier with suitable range for energy transport and an inelastic tunneling process which can be used to extract more energy from the more energetic carriers without requiring different materials for each frequency band. The aim is to overcome the fundamental 56-percent loss associated with mismatch between the broad solar spectrum and the monoenergetic conduction electrons used to transport energy in conventional silicon solar cells. This paper presents a qualitative discussion of the unknowns and barrier problems, including ideas for coupling surface plasmons into the tunnels, a step which has been the weak link in the efficiency chain.

Anderson, L. M.↗

Glancing incidence EUV telescopes - Analysis and comparison

Steps in the derivation of generalized surface equations describing either a Wolter or Wolter-Schwarzschild type II extreme ultraviolet telescope are outlined. These surface equations are incorporated in an optical design program where first-order design parameters are varied to produce a number of different series of type II telescopes. These series are then ray traced to compare and analyze the geometric image quality for different designs in terms of minimum rms angular blur and field curvature. Results of an analysis illustrating the dependence of effective area on first-order design parameters are also presented. The differences and similarities between equivalent Wolter and Wolter-Schwarzschild designs are discussed.

Davila, P. M.↗

Atmospheric transfer of radiation above an inhomogeneous non-Lambertian reflective ground. II - Computational considerations and results

The theoretical foundation for solution of the three-dimensional radiative transfer problem described in the preceding paper is reviewed. Practical considerations involved in implementing the Fourier transform/Gauss-Seidel method on a minicomputer are discussed, along with derivations of symmetry relations and approximations which can be used to enhance the computational efficiency. Model results for a surface whose albedo varies as a step function are presented and compared with published solutions obtained by using the Monte Carlo method.

Diner, D. J.↗

The effect of Tricresyl-Phosphate (TCP) as an additive on wear of Iron (Fe)

The effect of tricresyl phosphate (TCP) as an antiwear additive in lubricant trimethyol propane triheptanoate (TMPTH) was investigated. The objective was to examine step loading wear by use of surface analysis, wetting, and chemical bonding changes in the lubricant. The investigation consisted of steploading wear studies by a pin or disk tribometer, the effects on wear related to wetting by contact angle and surface tension measurements of various liquid systems, the chemical bonding changes between lubricant and TCP chromatographic analysis, and by determining the reaction between the TCP and metal surfaces through wear scar analysis by Auger emission spectroscopy (AES). The steploading curve for the base fluid alone shows rapid increase of wear rate with load. The steploading curve for the base fluid in presence of 4.25 percent by volume TCP under dry air purge has shown a great reduction of wear rate with all loads studied. It has also been found that the addition of 4.25 percent by volume TCP plus 0.33 percent by volume water to the base lubricant under N2 purge also greatly reduces the wear rate with all loads studied. AES surface analysis reveals a phosphate type wear resistant film, which greatly increases load-bearing capacity, formed on the iron disk. Preliminary chromatographic studies suggest that this film forms either because of ester oxidation or TCP degradation. Wetting studies show direct correlation between the spreading coefficient and the wear rate.

Ghose, Hiren M.↗

Layout optimization with algebraic multigrid methods

Finding the optimal position for the individual cells (also called functional modules) on the chip surface is an important and difficult step in the design of integrated circuits. This paper deals with the problem of relative placement, that is the minimization of a quadratic functional with a large, sparse, positive definite system matrix. The basic optimization problem must be augmented by constraints to inhibit solutions where cells overlap. Besides classical iterative methods, based on conjugate gradients (CG), we show that algebraic multigrid methods (AMG) provide an interesting alternative. For moderately sized examples with about 10000 cells, AMG is already competitive with CG and is expected to be superior for larger problems. Besides the classical 'multiplicative' AMG algorithm where the levels are visited sequentially, we propose an 'additive' variant of AMG where levels may be treated in parallel and that is suitable as a preconditioner in the CG algorithm.

Regler, Hans↗

Theoretical Studies of the Extra-terrestrial Chemistry of Biogenic Elements and Compounds

Results are presented on the following:(A) Ab initio quantum chemical studies of reactions in astrophysical ices.Theoretical electronic structure calculations were used to investigate reactions between formaldehyde (H2CO) and both hydrogen cyanide (HCN) and isocyanide (HNC) in search of other favorable reactions such as ammonia-formaldehyde addition, which was found in a recent theoretical study to be strongly enhanced when it occurs within cold ices.The present study examines further reactions between this product and H2CO in ices.(B) Heterogeneous hydrogenation of CO and H2CO on icy grain mantles.Formaldehyde (H2CO) and methanol (CH30H) are thought to be produced in the interstellar medium by the successive hydrogenation of carbon monoxide (CO) on grain surfaces. In the gas phase, the steps in which H adds to CO and H2CO possess modest barriers and are too inefficient to account for the observed abundances. Recent laboratory work has confirmed that formaldehyde and methanol are formed when H atoms are deposited on CO ice at 12 K. The present study employed ab initio quantum chemical calculations to investigate the impact of water ice on the sequential hydrogenation of CO.(C) Ice-bound condensed-phase reactions involving formic acid (HCOOH), methylenimine (CH2NH), hydrogen cyanide (HCN), hydrogen isocyanide (HNC), and ammonia ( 3) were investigated in order to characterize possible pathways to larger organic species that are efficient at the cold temperatures prevalent in cometary nuclei and the interstellar medium. (D) Pathways to glycine and other amino acids in ultraviolet-irradiated ices determined via quantum chemical modeling.(E) Photoionization in ultraviolet processing of astrophysical ice analogs at cryogenic temperatures.

Woon, David E.↗

Geomagnetic Field During a Reversal

It has frequently been suggested that only the geomagnetic dipole, rather than higher order poles, reverse during a geomagnetic field reversal. Under this assumption the geomagnetic field strength has been calculated for the surface of the Earth for various steps of the reversal process. Even without an eminent a reversal of the field, extrapolation of the present secular change (although problematic) shows that the field strength may become zero in some geographic areas within a few hundred years.

Heirtzler, J. R.↗

Lunar and Planetary Science XXXV: Mars

The session "Mars" included the following reports:Tentative Theories for the Long-Term Geological and Hydrological Evolution of Mars; Stratigraphy of Special Layers Transient Ones on Permeable Ones: Examples from Earth and Mars; Spatial Analysis of Rootless Cone Groups on Iceland and Mars; Summer Season Variability of the North Residual Cap of Mars from MGS-TES; Spectral and Geochemical Characteristics of Lake Superior Type Banded Iron Formation: Analog to the Martian Hematite Outcrops; Martian Wave Structures and Their Relation to Mars; Shape, Highland-Lowland Chemical Dichotomy and Undulating Atmosphere Causing Serious Problems to Landing Spacecrafts; Shear Deformation in the Graben Systems of Sirenum Fosssae, Mars: Preliminary Results; Components of Martian Dust Finding on Terrestrial Sedimentary Deposits with Use of Infrared Spectra; Morphologic and Morphometric Analyses of Fluvial Systems in the Southern Highlands of Mars; Light Pattern and Intensity Analysis of Gray Spots Surrounding Polar Dunes on Mars; The Volume of Possible Ancient Oceanic Basins in the Northern Plains of Mars MARSES: Possibilities of Long-Term Monitoring Spatial and Temporal Variations and Changes of Subsurface Geoelectrical Section on the Base; Results of the Geophysical Survey Salt/Water Interface and Groundwater Mapping on the Marina Di Ragusa, Sicily and Shalter Island, USA ;A Miniature UV-VIS Spectrometer for the Surface of Mars; Automatic Recognition of Aeolian Ripples on Mars; Absolute Dune Ages and Implications for the Time of Formation of Gullies in Nirgal Vallis, Mars; Diurnal Dust Devil Behaviour for the Viking 1 Landing Site: Sols 1 to 30; Topography Based Surface Age Computations for Mars: A Step Toward the Formal Proof of Martian Ocean Recession, Timing and Probability; Gravitational Effects of Flooding and Filling of Impact Basins on Mars; Viking 2 Landing Site in MGS/MOC Images South Polar Residual Cap of Mars: Features, Stratigraphy, and Changes.

Source record↗

Mouse Cleaning Apparatus and Method

The method of using the mouse pad cleaning apparatus is disclosed and claimed. The method comprises the steps of uncovering the mouse cleaning surface, applying the mouse and ball of the mouse to the cleaning surface, moving the mouse in a rotational pattern on the mouse cleaning surface, removing the mouse form the mouse cleaning surface, washing the cleaning surface, and covering the mouse cleaning surface. A mouse pad cleaning apparatus comprising a plurality of substrates, each said substrate having adhesive thereon, said plurality of substrates residing in and affixed to a receptacle. A single substrate having adhesive, which may be washable or non-washable, thereon may be employed. The washable adhesive may be an organopolysiloxane or gelatinous elastomer.

Glenn L Williams↗

An Improved Technique for the Preparation of Mounted or Unmounted Carbon/Epoxy Specimens

As carbon/epoxy materials became more prevalent in the aerospace industry, microstructural analysis demanded specimen preparation techniques that led to better polished surfaces, achievable in a shorter time, and using fewer steps. The desire to use image analysis for material characterization also helped drive the goal for defect free surfaces. At NASA-Langley (LaRC), carbon/epoxy specimens had been historically prepared in 1 inch diameter Bakelite mounts. Carbon/epoxy specimens that were 1/8 to 1/4 inch thick were not affected by the heat and pressure required for mounting in Bakelite, however thinner specimens were crushed during mounting. A two-part room temperature curing epoxy was chosen as an alternative but sometimes voids developed between the specimen and the mounting material. This was prevented by either heating the epoxy to 140 degrees F to lower the viscosity of the epoxy or by using a vacuum impregnation apparatus. Both techniques helped facilitate flow and allowed the epoxy to penetrate crevices.

Edahl, Robert A., Jr.↗