Search NASA⌕ Search

SEARCH · Search NASA

Results for “value analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Relativistic electron acceleration and decay time scales in the inner and outer radiation belts: SAMPEX

High-energy electrons have been measured systematically in a low-altitude (520 x 675 km), nearly polar (inclination = 82 deg) orbit by sensitive instruments onboard the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX). Count rate channels with electron energy thresholds ranging from 0.4 MeV to 3.5 MeV in three different instruments have been used to examine relativistic electron variations as a function of L-shell parameter and time. A long run of essentially continuous data (July 1992 - July 1993) shows substantial acceleration of energetic electrons throughout much of the magnetosphere on rapid time scales. This acceleration appears to be due to solar wind velocity enhancements and is surprisingly large in that the radiation belt 'slot' region often is filled temporarily and electron fluxes are strongly enhanced even at very low L-values (L aprroximately 2). A superposed epoch analysis shows that electron fluxes rise rapidly for 2.5 is approximately less than L is approximately less than 5. These increases occur on a time scale of order 1-2 days and are most abrupt for L-values near 3. The temporal decay rate of the fluxes is dependent on energy and L-value and may be described by J = Ke-t/to with t(sub o) approximately equals 5-10 days. Thus, these results suggest that the Earth's magnetosphere is a cosmic electron accelerator of substantial strength and efficiency.

Baker, D. N.↗
NASA NTRS2006

Comparison of Recent Modeled and Observed Trends in Total Column Ozone

We present a comparison of trends in total column ozone from 10 two-dimensional and 4 three-dimensional models and solar backscatter ultraviolet-2 (SBUV/2) satellite observations from the period 1979-2003. Trends for the past (1979-2000), the recent 7 years (1996-2003), and the future (2000-2050) are compared. We have analyzed the data using both simple linear trends and linear trends derived with a hockey stick method including a turnaround point in 1996. If the last 7 years, 1996-2003, are analyzed in isolation, the SBUV/2 observations show no increase in ozone, and most of the models predict continued depletion, although at a lesser rate. In sharp contrast to this, the recent data show positive trends for the Northern and the Southern Hemispheres if the hockey stick method with a turnaround point in 1996 is employed for the models and observations. The analysis shows that the observed positive trends in both hemispheres in the recent 7-year period are much larger than what is predicted by the models. The trends derived with the hockey stick method are very dependent on the values just before the turnaround point. The analysis of the recent data therefore depends greatly on these years being representative of the overall trend. Most models underestimate the past trends at middle and high latitudes. This is particularly pronounced in the Northern Hemisphere. Quantitatively, there is much disagreement among the models concerning future trends. However, the models agree that future trends are expected to be positive and less than half the magnitude of the past downward trends. Examination of the model projections shows that there is virtually no correlation between the past and future trends from the individual models.

Andersen, S. B.↗
NASA NTRS1977

Environmental change pattern in central Japan as revealed by LANDSAT data

The author has identified the following significant results. A patched cirrus reported by weather stations was hardly recognizable by the eye in LANDSAT MSS data of a three year time lapse. The cloud cover affected radiance values significantly in band 4, while its effect was minimal in bands 6 and 7 (near infrared spectra). The cross correlation coefficient analysis between the two images indicated that the highest value obtained in central Japan was 0.963 for the area where little change occurred in land use over the three period. An analysis of land use in Nagoya showed little change in the metropolitan area while a fairly large change occurred in the northern periphery of the city where large scale housing projects are located.

Maruyasu, T.↗
DOE OSTI2022

Very small-scale, segregating-fluidized-bed experiments: A dataset for CFD-DEM validation and uncertainty quantification

IWe report fluidization experiments were conducted on a small scale and with a rapid response (short duration) to enable corresponding simulations at low-computational cost. Rise times are reported for four or fewer polyethylene particles (intruders) in an air-fluidized bed of ~5000 group D glass beads. Experimental inputs were completely characterized—particle properties, system dimensions and operating conditions—which is necessary for validating computational fluid mechanics (CFD)-discrete element method (DEM) including a comprehensive uncertainty quantification (UQ) analysis. Input uncertainties are reported as bounds or cumulative distribution functions of measured values. The staggering number of simulations required to complete a UQ analysis (~O[10 4 ] simulations corresponding to ~5 uncertain inputs) motivates this study. These segregating-bed experiments are designed to permit analogous CFD-DEM simulations to complete in less than a day on a single (~2.5 GHz) computational processor unit (CPU). Segregation times are reported for several operating conditions, intruder sizes, and initial configurations, providing a rich dataset for numerical model testing, validation and UQ.

42 ENGINEERING↗
NASA NTRS1973

Sediment pattern correlation with inflow and tidal action

The author has identified the following significant results. At the time the two scenes of the Chesapeake Bay Study Area were taken, ground truth data were taken at a number of stations within each of the test areas. Where local conditions permitted, either all or a part of the following parameters were measured: water temperature, spectral transmittance, conductivity, turbidity, dissolved oxygen, current velocity, and pH. In addition, a sample of water was taken at each location and the concentration of suspended material in each sample was determined. In the analysis the relationship of each measured parameter and the corresponding radiance values (reflectance spectrum) detected by the ERTS-1 were evaluated. Thus far, the analysis has shown a good correlation with concentrations of suspended material contained in the water.

Grabau, W. E.↗
DOE OSTI2019

Weak Lensing Analysis of SPT selected Galaxy Clusters using Dark Energy Survey Science Verification Data

We present weak-lensing (WL) mass constraints for a sample of massive galaxy clusters detected by the South Pole Telescope (SPT) via the Sunyaev-Zel'dovich effect (SZE). We use griz imaging data obtained from the Science Verification (SV) phase of the Dark Energy Survey (DES) to fit the WL shear signal of 33 clusters in the redshift range 0.25 <= z <= 0.8 with NFW profiles and to constrain a four-parameter SPT mass-observable relation. To account for biases in WL masses, we introduce a WL mass to true mass scaling relation described by a mean bias and an intrinsic, lognormal scatter. We allow for correlated scatter within the WL and SZE mass-observable relations and use simulations to constrain priors on nuisance parameters related to bias and scatter from WL. We constrain the normalization of the zeta-M-500 relation, A(SZ) = 12.0(-6.7)(+2.6) when using a prior on the mass slope B-SZ from the latest SPT cluster cosmology analysis. Without this prior, we recover A(SZ) = 10.8(-5.2)(+2.3) and B-SZ = 1.30(-0.44)(+0.22). Results in both cases imply lower cluster masses than measured in previous work with and without WL, although the uncertainties are large. The WL derived value of B-SZ is approximate to 20 per cent lower than the value preferred by the most recent SPT cluster cosmology analysis. The method demonstrated in this work is designed to constrain cluster masses and cosmological parameters simultaneously and will form the basis for subsequent studies that employ the full SPT cluster sample together with the DES data.

cosmology: observations↗
DOE OSTI2022

Framework for Quantitative Evaluation of Resilience Solutions: An Approach to Determine the Value of Resilience for a Particular Site

The paper provides the approach to providing a benefit cost analysis of energy and water alternatives to provide resilience to extreme events. The approach estimates the costs and returns of providing greater resilience of water and energy infrastructure. Extreme events are defined as high impact, low-frequency events such as, but not limited to, hurricanes, floods, storm surges and earthquakes. The provides justification for hardening water and energy infrastructure. Resilience is defined as “the ability to prepare for and to withstand an extreme event with little or no damage, or to recover more quickly from an extreme event.” The approach can be summarized as follows. The approach requires the development of a baseline with which to compare alternatives. The baseline is used to evaluate the baseline’s resilience to hazards through the probability of the hazard(s), the likelihood of damage from that the hazard through a vulnerability analysis, and the consequence to calculate a cost of the damage. The approach then evaluates proposed mitigation alternatives that would improve the resilience of the system. Each alternative is evaluated based on probability of the hazard, probability of vulnerability and consequence to determine the reduced damage that each alternative presents. The approach includes any monetary and non-monetary benefits that can quantified for each of the alternatives. Non-quantifiable benefits are evaluated based on the relative importance of each alternative to the criteria used to determine how well the alternative meets the goals and objectives of the site/facility. Then, a life cycle cost analysis should be conducted for the baseline and alternatives. Finally, the results of the life cycle analysis should be presented in a decision matrix with cost, net present value, benefit/cost ratios, and any non-monetary criteria ranked to show how well the alternatives met the criteria, weighted with the decision maker’s weights and the results presented.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Eigensolver performance comparison on Cray XC systems

Summary Hermitian (symmetric) eigenvalue solvers are the core constituents of electronic structure, quantum‐chemistry, and other HPC applications such as Quantum ESPRESSO, VASP, CP2K, and NWChem to name a few. Our understanding of the performance of symmetric eigenvalue algorithms on various hardware is clearly important to the quantum chemistry or condensed matter physics community but in fact goes beyond that community. For instance, big data analytics is increasingly utilizing eigenvalues solvers, in the study of randomized singular value decomposition (SVD) or principal component analysis (PCA). Noise, vibration, and harshness (NVH) is another field where fast and efficient eigenvalue solvers are required. Most eigenvalue solver packages feature numerous different parameters which can be tuned for performance, eg, the number of nodes, number of total ranks, the decomposition of the matrix, etc. In this paper, we investigate the performance of different packages as well as the influence of these knobs on the solver performance.

Cook, Brandon↗
DOE OSTI2024

Topology property analysis and application of stable time-delay regions for linear multiple time-delay systems

This study examines the relationship between the topology of stable time-delay regions and the stability analysis of an linear multiple time delay system. To analyze the topology of stable time-delay regions, we construct a function with a value equal to zero for the time-delay points on the boundaries of stable time-delay regions. The function is continuous and differentiable in the whole defining field with a global minimum of zero so that we can locate the boundaries by minimizing the value of the function. Based on the topology analysis, we proposed a performance validation approach for controllers that are designed to stabilize the system using feedback signals with time delays. The method based on the topology analysis is simple and reliable so that can deal with a linear time-invariant system with high order and multiple time delays (more than 3). The example case study shows that the above method is reliable and enables ultra-low latency coordination and control for the future power grid with ubiquitous power electronics.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Just-in-Time Compilation and Link-Time Optimization for OpenMP Target Offloading

Following the mass adoption of external accelerators for high performance computing, the overall performance of many applications has become increasingly dependent on relatively small accelerated kernels. As static analysis is fundamentally limited by dynamic values and external definitions, standard ahead-of-time compilation is not always sufficient to achieve the best performance. Furthermore, many users looking to port an existing application to run on an external accelerator will not want to fundamentally restructure their programs. These and other problems can be addressed through both link-time optimization (LTO) and just-in-time (JIT) compilation, but until now had sparse and inconsistent support from the compiler. In this work, we present a new compilation method that enables device-side LTO as well as a transparent JIT compilation tool-chain for OpenMP target offloading. Our contributions include an entirely new device linking and embedding scheme to enable LTO as well as a novel JIT engine to efficiently optimize OpenMP offloading regions at run-time. We also introduce a persistent caching system to improve end-to-end runtime using the JIT engine and minimize kernel launching overheads. We measure the performance of our LTO and JIT implementation via several real-world scientific applications. With our optimizations we observe significant improvements through LTO on large applications as well as significant end-to-end execution time improvement using JIT.

Tian, Shilei↗
DOE OSTI2018

Hyperspectral Imaging and SPA–LDA Quantitative Analysis for Detection of Colon Cancer Tissue

Hyperspectral imaging (HSI) has been demonstrated to provide a rapid, precise, and noninvasive method for cancer detection. However, because HSI contains many data, quantitative analysis is often necessary to distill information useful for distinguishing cancerous from normal tissue. To demonstrate that HSI with our proposed algorithm can make this distinction, we built a Vis–NIR HSI setup and made many spectral images of colon tissues, and then used a successive projection algorithm (SPA) to analyze the hyperspectral image data of the tissues. This was used to build an identification model based on linear discrimination analysis (LDA) using the relative reflectance values of the effective wavelengths. Other tissues were used as a prediction set to verify the reliability of the identification model. The results suggest that Vis–NIR hyperspectral images, together with the spectroscopic classification method, provide a new approach for reliable and safe diagnosis of colon cancer and could lead to advances in cancer diagnosis generally.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Microstructure Analysis and Rheological Behavior of Magnesium Alloys at Semi-solid Temperature Range

Microstructure and rheological properties of AZ91 and Elektron 21 magnesium alloys in semi-solid state were studied. Differential scanning calorimetry revealed significant differences in melting range in analyzed materials. Isothermal annealing for 5, 30 and 80 min, in semi-solid range, corresponding to 50 and 70% of solid fraction, showed slower microstructure coarsening kinetics in Elektron 21 due to the presence of Zr- and RE-enriched precipitations. Ostwald ripening and coalescence resulted in decrease in grains density with increasing annealing time and temperature. Hardness after annealing showed overall tendency to diminish with soaking time probably due to the growth of average grain size. Rheological analysis showed tendency to lower the value of dynamic viscosity coefficient as shear rate rise, which confirmed non-Newtonian flow behavior. The highest values of dynamic viscosity coefficient were obtained for alloy AZ91.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Loop engineering reveals the importance of active-site-decorating loops and gating residue in substrate affinity modulation of arginine deiminase (an anti-tumor enzyme)

Highlights: • Loop engineering on the active-site-decorating loops yielded several PpADI variants with low S{sub 0.5} values. • Several amino acid positions in active-site-decorating loops essential for the substrate affinity of PpADI were identified. • High loop flexibility (especially the gating residue Arg400) is beneficial for the substrate affinity of PpADI. Protein engineering of enzyme loop regions is an effective strategy to improve enzymatic properties. Previous studies that aimed to boost the activity of PpADI (an arginine deiminase from Pseudomonas plecoglossicida) under physiological conditions yielded several significantly improved variants that harbor substitutions predominantly located in active-site-decorating loops. A multi-site saturation mutagenesis at four positions in loop 1 (37, 38, 42, and 43) and three positions in loop 4 (402, 403, and 404) was performed to elucidate the importance of these loops in modulating the substrate affinity of PpADI. The identified “best” variant (M6-L1-4) showed a decreased S{sub 0.5} (‘K{sub M}’) of 0.48 mM compared with the parent M6 (0.81 mM). Subsequently, a rational design to recombine beneficial substitutions within loops 1 and 4 yielded variant L6 with a substantially decreased S{sub 0.5} value (0.17 mM). A comprehensive simulation analysis resulted in a conclusion that high loop flexibility (especially the gating residue Arg400) is beneficial for substrate affinity due to less efficient blocking of the active site.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2022

Mechanistic pathways and role of oxygen in oxidative coupling of methane derived from transient kinetic studies

Oxidative coupling of methane (OCM) is a promising industrial process to upgrade natural gas to high value chemicals. In this study, Temporal Analysis of Products (TAP) and steady-state experiments were conducted to distinguish how the composition of surface and gas phase oxygen influence mechanistic details of the selective conversion of CH 4 to C 2 H 4 over the Mn-Na 2 WO 4 /SiO 2 catalyst. The results from TAP studies indicate that methane activation on this catalyst proceeds predominantly via a short-lived, transient surface oxygen species and there is a competition for this species to form either CO or methyl radicals on the surface. This active species has a total lifetime of 3 s and is identified to have a dioxygen (e.g. O 2 2- or O 2 -) form. We show that the concentration of the transient surface oxygen species significantly impacts the OCM performance. Oxygen attributed to the catalyst lattice (in a singular form e.g., O - ), is found to activate methane to a lesser degree, but exclusively forms CO 2 . Evidence for these surface pathways for methyl radical, CO and CO 2 formation identified by TAP are also validated through steady-state experiments. Finally, by distinguishing different catalyst oxygen species and their role in selective/nonselective pathways, important screening criteria have been identified for the advancement of superior catalyst formulations.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Influence of velocity of pressing in RCS processed AA8090 Al-Li alloy

Highlights: • For the first time the Influence of RCS on the properties of AA 8090 has been studied by processing velocity. • It is found that the properties vary according to pressing velocity and number of passes. • Reported significant property improvement achieved through the pressing velocity of 1.5mm/s. - Abstract: The effect of the velocity of pressing on grain refinement in AA8090 Al-Li alloy sheets during repetitive corrugation and straightening (RCS) at 300 °C is studied. V-groove corrugation dies and flattening dies were used at three different pressing velocities of 1.5 mm/s, 2 mm/s and 2.5 mm/s. The specimen temperature was maintained at 300 °C. Grain refinement was significantly influenced by the pressing velocity. The samples processed for 8 passes at a pressing velocity of 1.5 mm/s had an improved microhardness value of 104 HV and an increased tensile strength of 405 MPa which is respectively 39% and 113% more than the corresponding values in the parent material. TEM analysis showed that samples processed at a pressing velocity of 1.5 mm/s had in places a grain size down to 50 nm and the EBSD results revealed that the average grain size was 2 μm, with 86% of the total number of grain boundaries of the high angle type.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Close-contact melting on an isothermal surface with the inclusion of non-Newtonian effects

The present study deals with a theoretical investigation of a close-contact melting (CCM) process involving a vertical cylinder on a horizontal isothermal surface, where the liquid phase is a non-Newtonian viscoplastic fluid that behaves according to the Bingham model. Accordingly, a new approach is formulated based on the thin layer approximation and different quasi-steady process assumptions. By analytical derivation, an algebraic equation that relates the molten layer thickness and the solid bulk height is developed. The problem is then solved numerically, coupled with another equation for the melting rate. The new model shows that as the yield stress increases the melting rate decreases and the molten layer thickness increases. It is found that under certain conditions, the model can be reduced to a form that allows an analytical solution. The approximate model predicts an exponential dependence of both the melt fraction and the molten layer thickness. Comparison between the numerical and analytical solutions shows that the analytical approximation provides an excellent estimation for sufficiently large values of the yield stress. Dimensional analysis, which is supported by the analytical model results, reveals the dimensionless groups that govern the problem. For the general case, the melt fraction is a function of two dimensionless groups. For the analytical approximation, it is shown that the melt fraction is governed by a single dimensionless group and that the molten layer thickness is governed by two dimensionless groups.

Mechanics↗
DOE OSTI2022

Triacetic Acid Lactone and 4-Hydroxycoumarin as Bioprivileged Molecules for the Development of Performance-Advantaged Organic Corrosion Inhibitors

Biomass conversion, especially the development of bioprivileged molecules utilizing integration of biological and chemical processes, has shown potential to produce novel chemicals with enhanced properties. Here, organic corrosion inhibitors based on triacetic acid lactone and 4-hydroxycoumarin have been synthesized in good yield and tested for corrosion inhibition on mild steel in both sulfuric acid and hydrochloric acid. Sixteen novel corrosion inhibitors derived from triacetic acid lactone and 4-hydroxycoumarin were efficiently synthesized and twelve of them showed high corrosion inhibition efficiency as confirmed by electrochemical impedance spectroscopy (giving values greater than 78%) and polarization analysis. While triacetic acid lactone-based compounds showed good corrosion inhibition performance, the 4-hydroxycoumarin-based compounds showed further improvement in corrosion inhibition performance. Scanning electron microscopy (SEM) analysis of the mild steel coupon in the presence of selected inhibitors showed that corrosion was significantly diminished, with complementary X-ray photoelectron spectroscopy (XPS) analysis suggesting the inhibitor molecules strongly adsorbed on the steel surface. Quantum chemical calculations showed poor correlation between calculated parameters and the performance of these molecules. This large set of corrosion inhibitors containing a dozen promising corrosion inhibitors is useful for future rational design of corrosion inhibitors. In conclusion, the results demonstrate a new direction for the development of bioprivileged molecules.

09 BIOMASS FUELS↗
DOE OSTI2022

Comparing in planta accumulation with microbial routes to set targets for a cost-competitive bioeconomy

Plants and microbes share common metabolic pathways for producing a range of bioproducts that are potentially foundational to the future bioeconomy. However, in planta accumulation and microbial production of bioproducts have never been systematically compared on an economic basis to identify optimal routes of production. A detailed technoeconomic analysis of four exemplar compounds (4-hydroxybenzoic acid [4-HBA], catechol, muconic acid, and 2-pyrone-4,6-dicarboxylic acid [PDC]) is conducted with the highest reported yields and accumulation rates to identify economically advantaged platforms and breakeven targets for plants and microbes. The results indicate that in planta mass accumulation ranging from 0.1 to 0.3 dry weight % (dwt%) can achieve costs comparable to microbial routes operating at 40 to 55% of maximum theoretical yields. These yields and accumulation rates are sufficient to be cost competitive if the products are sold at market prices consistent with specialty chemicals ($20 to $50/kg). Prices consistent with commodity chemicals will require an order-of-magnitude-greater accumulation rate for plants and/or yields nearing theoretical maxima for microbial production platforms. This comparative analysis revealed that the demonstrated accumulation rates of 4-HBA (3.2 dwt%) and PDC (3.0 dwt%) in engineered plants vastly outperform microbial routes, even if microbial platforms were to reach theoretical maximum yields. Their recovery and sale as part of a lignocellulosic biorefinery could enable biofuel prices to be competitive with petroleum. Muconic acid and catechol, in contrast, are currently more attractive when produced microbially using a sugar feedstock. Ultimately, both platforms can play an important role in replacing fossil-derived products.

59 BASIC BIOLOGICAL SCIENCES↗