Search NASA⌕ Search

SEARCH · Search NASA

Results for “variable free”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,063 records · Page 59

TESTING THE NO-HAIR THEOREM WITH OBSERVATIONS IN THE ELECTROMAGNETIC SPECTRUM. III. QUASI-PERIODIC VARIABILITY

According to the no-hair theorem, astrophysical black holes are uniquely described by their masses and spins. An observational test of the no-hair theorem can be performed by measuring at least three different multipole moments of the spacetime of a black hole and verifying whether their values are consistent with the unique combinations of the Kerr solution. In this paper, we study quasi-periodic variability observed in the emission from black holes across the electromagnetic spectrum as a test of the no-hair theorem. We derive expressions for the Keplerian and epicyclic frequencies in a quasi-Kerr spacetime, in which the quadrupole moment is a free parameter in addition to mass and spin. We show that, for moderate spins, the Keplerian frequency is practically independent of small deviations of the quadrupole moment from the Kerr value, while the epicyclic frequencies exhibit significant variations. We apply this framework to quasi-periodic oscillations (QPOs) in black hole X-ray binaries in two different scenarios. In the case that a pair of QPOs can be identified as the fundamental g- and c-modes in the accretion disk, we show that the no-hair theorem can be tested in conjunction with an independent mass measurement. If pairs of oscillations are identified with non-parametric resonance of dynamical frequencies in the accretion disk, then testing the no-hair theorem also requires an independent measurement of the black hole spin. In addition, we argue that VLBI observations of Sgr A* may test the no-hair theorem through a combination of imaging observations and the detection of quasi-periodic variability.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation and Analysis of Dolomite Dissolution in Variable Strength Systems Relevant to the WIPP

The Waste Isolation Pilot Plant (WIPP) was opened in 1999 as a solution to the long-term disposal of the nation's nuclear defense-generated transuranic (TRU) waste. The salt beds were recommended as the ideal location because they are free from flowing fresh water, easily mined, impermeable, and geologically stable. However, for performance assessment modeling, release scenarios must be considered. The most likely release scenario was determined to be human intrusion leading to direct and/or long-term brine release (US DOE 1995, US DOE 1996, Perkins et al., 1999). The focus of this research is the Rustler formation because it is located above the WIPP and is the most transmissive layer (Perkins et al., 1999). Objective: To determine the effect of chelating ligands ( e.g. EDTA) on dissolution of dolomite in high ionic strength systems. Do brines impact dolomite dissolution and how is it affected by EDTA binding with cations? By varying the ionic strengths, different brine conditions can be simulated similar to those in and around the Culebra member and evaluate trends of dissolved Ca and Mg in the aqueous phase from the quantified data. Conclusions: <2% of dolomite dissolved over one week at pH 8.5. Greater dissolution occurred at higher ionic strength and in the presence of NaCl with approximately 0.4 vs. 0.9% of Mg removed from dolomite in 0.1 and 1.0 M Na. Further, 0.3 vs. 0.9% of Mg was removed from dolomite in 1.0 M IS CaCl{sub 2} versus NaCl. EDTA increased dissolution of dolomite at low ionic strength due to its strong complexation affinity for Ca/Mg with slightly greater removal of Ca than Mg. Significant differences were not observed at high ionic strength due to the presence of large concentrations of competing cations (Na, Ca, Mg). Slightly higher concentrations of Ca were removed from dolomite than Mg after one week, suggesting either incongruent dissolution or release through ion exchange of Ca from trace mineral impurities. Further, when EDTA was present, it may have increased Ca removal due to its greater complexation for Ca than Mg. Environmental Implications: High ionic strength brines and low ionic strength solutions with organic ligands increase dissolution of dolomite. Due to the long half-lives of radionuclides in the TRU waste, it may be important to consider the long term impact of dolomite dissolution for potential release scenarios.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Robustness of predator-prey models for confinement regime transitions in fusion plasmas

Energy transport and confinement in tokamak fusion plasmas is usually determined by the coupled nonlinear interactions of small-scale drift turbulence and larger scale coherent nonlinear structures, such as zonal flows, together with free energy sources such as temperature gradients. Zero-dimensional models, designed to embody plausible physical narratives for these interactions, can help to identify the origin of enhanced energy confinement and of transitions between confinement regimes. A prime zero-dimensional paradigm is predator-prey or Lotka-Volterra. Here, we extend a successful three-variable (temperature gradient; microturbulence level; one class of coherent structure) model in this genre [M. A. Malkov and P. H. Diamond, Phys. Plasmas 16, 012504 (2009)], by adding a fourth variable representing a second class of coherent structure. This requires a fourth coupled nonlinear ordinary differential equation. We investigate the degree of invariance of the phenomenology generated by the model of Malkov and Diamond, given this additional physics. We study and compare the long-time behaviour of the three-equation and four-equation systems, their evolution towards the final state, and their attractive fixed points and limit cycles. We explore the sensitivity of paths to attractors. It is found that, for example, an attractive fixed point of the three-equation system can become a limit cycle of the four-equation system. Addressing these questions which we together refer to as 'robustness' for convenience is particularly important for models which, as here, generate sharp transitions in the values of system variables which may replicate some key features of confinement transitions. Our results help to establish the robustness of the zero-dimensional model approach to capturing observed confinement phenomenology in tokamak fusion plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Langevin equation approach to electron transfer reactions in the diabatic basis

A linear Langevin equation that governs the population dynamics of electron transfer reactions is derived. The noise in the Langevin equation is eliminated by treating the diabatic population fluctuations as the relevant variables, leaving only the memory kernel responsible for the population relaxation. Within the memory kernel, the diabatic coupling is treated perturbatively and a second order expansion is found to give a simple closed form expression for the kernel. The accuracy of the second order truncation is maximized by performing a fixed rotation of the diabatic electronic states that minimizes the first order free energy of the system and thus minimizes the effect of the perturbation on the thermodynamics. The resulting two-hop Langevin equation (THLE) is then validated by applying it to a simple spin-boson model, where exact results exist. Excellent agreement is found in a wide parameter range, even where the perturbation is moderately strong. Results obtained in the rotated electronic basis are found to be consistently more accurate than those from the unrotated basis. These benchmark calculations also allow us to demonstrate the advantage of treating the population fluctuations instead of the populations as the relevant variables, as only the former lead to reliable results at long time. Thus, the THLE appears to provide a viable alternative to established methods - such as Ehrenfest dynamics or surface hopping--for the treatment of nonadiabatic effects in electron transfer simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An Overset Grid Motion Driver for Resolving Entry Vehicle CFD Simulations with Large Changes in Wake Orientation

Time-accurate computational fluid dynamics (CFD) simulations using overset meshes can enable reduced computational cost compared to a rigid, monolithic mesh for blunt-body atmospheric entry vehicles. If the vehicle has a significant change in attitude, the high-density region of the overset mesh designed for resolving the subsonic wake can be kept in position as the wake orientation changes relative to the body. Current simulations generally keep the wake mesh fixed in attitude while the body rotates, assuming the wake orientation remains relatively constant. However, changes in the relative velocity over a long-duration simulation or effects of the body geometry can invalidate this assumption. This work presents a method for calculating the desired mesh orientation to resolve a blunt body wake using the atmosphere-relative velocity of the vehicle. A motion driver using these calculations is implemented in a CFD-in-the-loop flight model bridging the FUN3D flow solver and POST2 trajectory propagator. Overset meshing is performed using the Yoga extension for FUN3D. Results are presented for simulations with both overset and monolithic meshes under large changes in relative velocity (and therefore wake orientation). The results demonstrate that the motion driver successfully orients an overset wake mesh to capture the subsonic wake with sufficient resolution despite variable body rotation and body-relative freestream velocity.

CFD↗

HOT PLASMA FROM SOLAR ACTIVE REGION CORES: A TEST OF AC AND DC CORONAL HEATING MODELS?

Direct current (DC) models of solar coronal heating invoke magnetic reconnection to convert magnetic free energy into heat, whereas alternating current (AC) models invoke wave dissipation. In both cases the energy is supplied by photospheric footpoint motions. For a given footpoint velocity amplitude, DC models predict lower average heating rates but greater temperature variability when compared to AC models. Therefore, evidence of hot plasma (T > 5 MK) in the cores of active regions could be one of the ways for current observations to distinguish between AC and DC models. We have analyzed data from the X-Ray Telescope (XRT) and the Atmospheric Imaging Assembly for 12 quiescent active region cores, all of which were observed in the XRT Be-thick channel. We did Differential Emission Measure (DEM) analysis and achieved good fits for each data set. We then artificially truncated the hot plasma of the DEM model at 5 MK and examined the resulting fits to the data. For some regions in our sample, the XRT intensities continued to be well-matched by the DEM predictions, even without the hot plasma. This truncation, however, resulted in unacceptable fits for the other regions. This result indicates that the hot plasma is present in these regions, even if the precise DEM distribution cannot be determined with the data available. We conclude that reconnection may be heating the hot plasma component of these active regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Steady-State Microbunching in a Storage Ring for Generating Coherent Radiation

Synchrotrons and storage rings deliver radiation across the electromagnetic spectrum at high repetition rates, and free electron lasers (FELs) produce radiation pulses with high peak brightness. However, at present few light sources can generate both high repetition rate and high brightness outside the optical range. We propose to create steady-state microbunching (SSMB) in a storage ring to produce coherent radiation at a high repetition rate or in continuous wave (CW) mode. In this paper we describe a general mechanism for producing SSMB and give sample parameters for EUV lithography and sub-millimeter sources. We also describe a similar arrangement to produce two pulses with variable spacing for pump-probe experiments. With technological advances, SSMB could reach the soft X-ray range (< 10 nm).

43 PARTICLE ACCELERATORS↗

Thermal and solubility effects on fault leakage during geologic carbon storage

Geologic carbon storage (GCS) is a promising method for reducing anthropogenic CO 2 emissions to the atmosphere. To safely deploy GCS in the field, it is necessary to assess risks and the effect of uncertainty on safe storage. The effect of uncertainty can be quantified using batches of simulations, but the high computational costs of high-resolution simulations necessitate use of reduced-order models (ROMs). Previous work involves ROMs for quantifying the risk of different potential leakage paths from storage reservoirs to shallow formations. However, previous studies on development of fault-leakage ROMs have limited numbers of uncertain parameters and do not explicitly examine impacts of CO 2 solubility and thermal stresses on fault reactivation, which can generate high-permeability pathways and compromise CO 2 storage. Here, we analyze an ensemble of simulations considering CO 2 leakage from a storage reservoir to a shallow aquifer through a fault while varying a number of uncertain parameters related to thermo-hydro-mechanical properties and CO 2 injection. We show the effects of solubility on: free-phase CO 2 -leakage rates, brine-leakage rates, and poroelastic fault destabilization. We find that CO 2 solubility is more important for estimating free-phase CO 2 -leakage rates compared to brine-leakage rates or poroelastic fault destabilization. We also find that thermal stresses and overpressures have different spatial distributions within the fault, indicating that the spatial variability of overpressures due to variation in flow parameters does not necessarily make the spatial variability of thermal stresses negligible. We suggest the use of the CO 2 phase-change path as a variable in future fault-leakage ROMs.

03 NATURAL GAS↗

Modeling the Photoelectrochemical Evolution of Lead-Based, Mixed-Halide Perovskites Due to Photosegregation

Lead-based, mixed-halide perovskites such as methylammonium lead iodide-bromide [MAPb(I 1-x Br x ) 3 ] undergo anion photosegregation under illumination. This is observed as low band gap photoluminescence from photogenerated iodine-rich domains due to favorable band offsets that induce carrier funneling into them. Unfortunately, theoretical rationalizations of mixed-halide photosegregation are complicated by biases inherent to photoluminescence-based observations. Recent compositionally-weighted X-ray diffraction (XRD) measurements now reveal broad distributions of photosegregated stoichiometries not captured by existing photosegregation models. To better bridge experiment and theory, we perform kinetic Monte Carlo (KMC) simulations of photosegregation within the context of a band gap-based thermodynamic model, which has previously accounted for numerous experimental observations. Our KMC simulations are modified to consider high carrier density Fermi-Dirac statistics that result from carrier funneling and accumulation within photosegregated I-rich domains. Obtained KMC results reproduce broad x terminal distributions seen experimentally and illustrate how they are characterized by a central, heavily I-enriched stoichiometry. I-rich domain “drifting” during photosegregation rationalizes the long photosegregation timescales seen experimentally with drifting simultaneously producing a wake of variable stoichiometry I-rich inclusions that form the lion’s share of stoichiometric heterogeneities seen in compositionally-weighted XRD measurements. These simulations and accompanying rationalizations further reveal a general criterion for realizing favorable free energies to induce demixing. Central to the criterion is the statistical occupation of low gap inclusions in the parent alloy by excitations. Furthermore, the resulting model thus provides a general framework for conceptualizing mixed-halide perovskite light and temperature sensitivities, mediated by photocarriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bioenergy sorghum maintains photosynthetic capacity in elevated ozone concentrations

Abstract Elevated tropospheric ozone concentration (O 3 ) significantly reduces photosynthesis and productivity in several C 4 crops including maize, switchgrass and sugarcane. However, it is unknown how O 3 affects plant growth, development and productivity in sorghum ( Sorghum bicolor L.), an emerging C 4 bioenergy crop. Here, we investigated the effects of elevated O 3 on photosynthesis, biomass and nutrient composition of a number of sorghum genotypes over two seasons in the field using free‐air concentration enrichment (FACE), and in growth chambers. We also tested if elevated O 3 altered the relationship between stomatal conductance and environmental conditions using two common stomatal conductance models. Sorghum genotypes showed significant variability in plant functional traits, including photosynthetic capacity, leaf N content and specific leaf area, but responded similarly to O 3 . At the FACE experiment, elevated O 3 did not alter net CO 2 assimilation ( A ), stomatal conductance ( g s ), stomatal sensitivity to the environment, chlorophyll fluorescence and plant biomass, but led to reductions in the maximum carboxylation capacity of phosphoenolpyruvate and increased stomatal limitation to A in both years. These findings suggest that bioenergy sorghum is tolerant to O 3 and could be used to enhance biomass productivity in O 3 polluted regions.

09 BIOMASS FUELS↗

Confronting Weather and Climate Models with Observational Data from Soil Moisture Networks over the United States

Four land surface models in uncoupled and coupled configurations are compared to observations of daily soil moisture from 19 networks in the conterminous United States to determine the viability of such comparisons and explore the characteristics of model and observational data. First, observations are analyzed for error characteristics and representation of spatial and temporal variability. Some networks have multiple stations within an area comparable to model grid boxes; for those it is found that aggregation of stations before calculation of statistics has little effect on estimates of variance, but soil moisture memory is sensitive to aggregation. Statistics for some networks stand out as unlike those of their neighbors, likely because of differences in instrumentation, calibration, and maintenance. Buried sensors appear to have less random error than near-field remote sensing techniques, and heat-dissipation sensors show less temporal variability than other types. Model soil moistures are evaluated using three metrics: standard deviation in time, temporal correlation (memory), and spatial correlation (length scale). Models do relatively well in capturing large-scale variability of metrics across climate regimes, but they poorly reproduce observed patterns at scales of hundreds of kilometers and smaller. Uncoupled land models do no better than coupled model configurations, nor do reanalyses outperform free-running models. Spatial decorrelation scales are found to be difficult to diagnose. Using data for model validation, calibration, or data assimilation from multiple soil moisture networks with different types of sensors and measurement techniques requires great caution. Finally, data from models and observations should be put on the same spatial and temporal scales before comparison.

54 ENVIRONMENTAL SCIENCES↗

Formulation of PI Aerogels with 3-D Printing Applications

Polyimide-based films were produced with 3-D printing capability consisting of TDI and PMDA monomers with acrylate functionality. The polymer was synthesized using a standard condensation with diisocyanate and dianhydride heated to 95⁰C under water free conditions. This method is relatively fast, cost effective and far more synthetically simple compared to diamine condensations seen in literature. Considering how crucial proper grafting of functional groups was in hierarchy application, various formulation variables were screened. Lastly, films were produced with PI material and the physical and chemical properties were examined using microscope imaging and UV-Vis Spectroscopy. The material was proven to have relatively fast cure times (5-10 minutes) and the films were shown to have long term stability.

36 MATERIALS SCIENCE↗

On optimal control of linear systems in the presence of multiplicative noise

This correspondence considers the problem of optimal regulator design for discrete time linear systems subjected to white state-dependent and control-dependent noise in addition to additive white noise in the input and the observations. A pseudo-deterministic problem is first defined in which multiplicative and additive input disturbances are present, but noise-free measurements of the complete state vector are available. This problem is solved via discrete dynamic programming. Next is formulated the problem in which the number of measurements is less than that of the state variables and the measurements are contaminated with state-dependent noise. The inseparability of control and estimation is brought into focus, and an 'enforced separation' solution is obtained via heuristic reasoning in which the control gains are shown to be the same as those in the pseudo-deterministic problem. An optimal linear state estimator is given in order to implement the controller.

Joshi, S. M.↗

Interaction of a strong blast wave with a free surface

When a point source explosion is initiated at the ocean surface, the shock propagated into the water is reflected at the surface as a centered expansion wave. The solution in the neighborhood of the interaction point is obtained by writing the equations of motion in the appropriate similarity variables and then changing the independent variables to polar coordinates based at the interaction point. From the zero-order solution of the resulting equations the slopes of boundaries at the interaction point are obtained. A first-order perturbation of this solution provides more accurate representation of the flow variables and the curvature of the shock surface near the interaction point.

Falade, A.↗

A transformation of the boundary layer equations for free convection past a vertical flat plate with arbitrary blowing and wall temperature variations

A transformation of the laminar boundary layer equations, similar to the transformation of Kao et al. (1977), is presented which allows arbitrary distributions of both wall temperature and blowing. The procedure yields constant boundary conditions, but variable coefficients appear in the differential equations. The proposed transformation is applicable to the problem of downward burning of vertical pieces of condensed-phase combustibles.

Vedhanayagam, M.↗

Fuselage and nozzle pressure distributions of a 1/12-scale F-15 propulsion model at transonic speeds. Effect of fuselage modifications and nozzle variables

Static pressure coefficient distributions on the forebody, afterbody, and nozzles of a 1/12 scale F-15 propulsion model was determined in the 16 foot transonic tunnel for Mach numbers from 0.60 to 1.20, angles of attack from -2 deg to 7 deg and ratio of jet total pressure to free stream static pressure from 1 up to about 7, depending on Mach number. The effects of nozzle geometry and horizontal tail deflection on the pressure distributions were investigated. Boundary layer total pressure profiles were determined at two locations ahead of the nozzles on the top nacelle surface. Reynolds number varied from about 1.0 x 10 to the 7th power per meter, depending on Mach number.

Pendergraft, O. C., Jr.↗

Self arbitrated VLSI asynchronous sequential circuits

A new class of asynchronous sequential circuits is introduced in this paper. The new design procedures are oriented towards producing asynchronous sequential circuits that are implemented with CMOS VLSI and take advantage of pass transistor technology. The first design algorithm utilizes a standard Single Transition Time (STT) state assignment. The second method introduces a new class of self synchronizing asynchronous circuits which eliminates the need for critical race free state assignments. These circuits arbitrate the transition path action by forcing the circuit to sequence through proper unstable states. These methods result in near minimum hardware since only the transition paths associated with state variable changes need to be implemented with pass transistor networks.

Whitaker, S.↗

Self-Similar Compressible Free Vortices

Lie group methods are used to find both exact and numerical similarity solutions for compressible perturbations to all incompressible, two-dimensional, axisymmetric vortex reference flow. The reference flow vorticity satisfies an eigenvalue problem for which the solutions are a set of two-dimensional, self-similar, incompressible vortices. These solutions are augmented by deriving a conserved quantity for each eigenvalue, and identifying a Lie group which leaves the reference flow equations invariant. The partial differential equations governing the compressible perturbations to these reference flows are also invariant under the action of the same group. The similarity variables found with this group are used to determine the decay rates of the velocities and thermodynamic variables in the self-similar flows, and to reduce the governing partial differential equations to a set of ordinary differential equations. The ODE's are solved analytically and numerically for a Taylor vortex reference flow, and numerically for an Oseen vortex reference flow. The solutions are used to examine the dependencies of the temperature, density, entropy, dissipation and radial velocity on the Prandtl number. Also, experimental data on compressible free vortex flow are compared to the analytical results, the evolution of vortices from initial states which are not self-similar is discussed, and the energy transfer in a slightly-compressible vortex is considered.

vonEllenrieder, Karl↗