Search NASA⌕ Search

SEARCH · Search NASA

Results for “ALT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

The Approach and Landing Test program of the Space Shuttle Orbiter 101

The Approach and Landing Test (ALT) program was conducted in late 1976 through November 1977 to investigate the low speed characteristics of the Orbiter alone. The innovative aspects of the Orbiter are discussed along with the ALT program and the testing methodology used. The Shuttle Transportation System concept is briefly reviewed. The ALT was a first step towards operational missions for the Shuttle. The prime objective of the ALT was to verify the systems design and integrated operation of the Orbiter, and to demonstrate the capability of the Orbiter to safely land at a designated runway. The first free flight of the Orbiter occurred on August 12, 1977. Attention is also given to the results obtained in free-flight two, three, four, and five. Free-flight five was specifically planned to demonstrate a runway landing.

Brice, T. R.↗

Diagnostic accuracy of acoustic radiation force impulse elastography (ARFI) in comparison to other non-invasive modalities in staging of liver fibrosis in chronic HCV patients: single-center experience

Purpose: To evaluate the reliability of ARFI elastography for liver fibrosis staging and compare it to other non-invasive assessment of hepatic fibrosis (FIB-4 and APRI) in chronic HCV (CHC) patients. Methods: A single-center, prospective study included 2103 CHC patients. Liver stiffness (LS) was evaluated by TE and ARFI elastography. FIB-4 and APRI were calculated. The area under the receiver-operating characteristic curve (AUROCs) was used to assess the diagnostic performance of ARFI elastography for staging of liver fibrosis using TE as a reference standard. Results: The best cut off values of ARFI elastography for diagnosis of ≥ F2, ≥ F3and F4 were 1.36 m/s, 1.45 m/s, and 1.7 m/s with AUROCs of 0.89, 0.94 and 0.95, respectively. ARFI elastography cut offs are lower in patients with normal ALT level compared to those with ALT level (1.1–< 3 ULN) and those with ALT level ≥ 3ULN (1.35 m/s vs 1.39 m/s vs 1.54 for F ≥ 2, 1.44 m/s vs 1.58 m/s vs 1.6 m/s for F3, 1.69 m/s, 1.84 m/s, 1.86 m/s for F4). FIB-4 (0.82–0.86) and APRI (0.78–0.82) yielded lower AUC in prediction of significant fibrosis and cirrhosis than ARFI elastography (0.89–0.95). Conclusion: ARFI elastography is a reliable method for non-invasive staging of liver fibrosis in CHC patients when compared to TE with a good diagnostic performance comparable to FIB-4 and APRI scores for the prediction of significant fibrosis and cirrhosis.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

PPAR{alpha} regulates the hepatotoxic biomarker alanine aminotransferase (ALT1) gene expression in human hepatocytes

In this work, we investigated a potential mechanism behind the observation of increased aminotransferase levels in a phase I clinical trial using a lipid-lowering drug, the peroxisome proliferator-activated receptor (PPAR) {alpha} agonist, AZD4619. In healthy volunteers treated with AZD4619, serum alanine aminotransferase (ALT) and aspartate aminotransferase (AST) activities were elevated without an increase in other markers for liver injury. These increases in serum aminotransferases have previously been reported in some patients receiving another PPAR{alpha} agonist, fenofibrate. In subsequent in vitro studies, we observed increased expression of ALT1 protein and mRNA in human hepatocytes after treatment with fenofibric acid. The PPAR effect on ALT1 expression was shown to act through a direct transcriptional mechanism involving at least one PPAR response element (PPRE) in the proximal ALT1 promoter, while no effect of fenofibrate and AZD4619 was observed on the ALT2 promoter. Binding of PPARs to the PPRE located at - 574 bp from the transcriptional start site was confirmed on both synthetic oligonucleotides and DNA in hepatocytes. These data show that intracellular ALT expression is regulated by PPAR agonists and that this mechanism might contribute to increased ALT activity in serum.

60 APPLIED LIFE SCIENCES↗

Molecular mechanism of trichloroethylene-induced hepatotoxicity mediated by CYP2E1

Cytochrome P450 (CYP) 2E1 was suggested to be the major enzyme involved in trichloroethylene (TRI) metabolism and TRI-induced hepatotoxicity, although the latter molecular mechanism is not fully understood. The involvement of CYP2E1 in TRI-induced hepatotoxicity and its underlying molecular mechanism were studied by comparing hepatotoxicity in cyp2e1{sup +/+} and cyp2e1{sup -/-} mice. The mice were exposed by inhalation to 0 (control), 1000, or 2000 ppm of TRI for 8 h a day, for 7 days, and TRI-hepatotoxicity was assessed by measuring plasma alanine aminotransferase (ALT) and aspartate aminotransferase (AST) activities and histopathology. Urinary metabolites of trichloroethanol and trichloroacetic acid (TCA) were considerably greater in cyp2e1{sup +/+} compared to cyp2e1{sup -/-} mice, suggesting that CYP2E1 is the major P450 involved in the formation of these metabolites. Consistent with elevated plasma ALT and AST activities, cyp2e1{sup +/+} mice in the 2000 ppm group showed histopathological inflammation. TRI significantly upregulated PPAR{alpha}, which might function to inhibit NF{kappa}B p50 and p65 signalling. In addition, TRI-induced NF{kappa}B p52 mRNA, and significantly positive correlation between NF{kappa}B p52 mRNA expression and plasma ALT activity levels were observed, suggesting the involvement of p52 in liver inflammation. Taken together, the current study directly demonstrates that CYP2E1 was the major P450 involved in the first step of the TRI metabolism, and the metabolites produced may have two opposing roles: one inducing hepatotoxicity and the other protecting against the toxicity. Intermediate metabolite(s) from TRI to chloral hydrate produced by CYP2E1-mediated oxidation may be involved in the former, and TCA in the latter.

60 APPLIED LIFE SCIENCES↗

Every Atom Counts: Elucidating the Fundamental Impact of Structural Change in Conjugated Polymers for Organic Photovoltaics

As many conjugated polymer-based organic photovoltaic (OPV) materials provide substantial solar power conversion efficiencies (as high as 13%), it is important to develop a deeper understanding of how the primary repeat unit structures impact device performance. In this work, we have varied the group 14 atom (C, Si, Ge) at the center of a bithiophene fused ring to elucidate the impact of a minimal repeat unit structure change on the optical, transport, and morphological properties, which ultimately control device performance. Careful polymerization and polymer purification produced three “one-atom change” donor–acceptor conjugated alternating copolymers with similar molecular weights and dispersities. DFT calculation, absorption spectroscopy, and high-temperature solution 1 H nuclear magnetic resonance (NMR) results indicate that poly(dithienosilole-alt-thienopyrrolodione), P(DTS-TPD), and poly(dithienogermole-alt-thienopyrrolodione), P(DTG-TPD) exhibit different rotational conformations when compared to poly(cyclopentadithiophene-alt-thienopyrrolodione), P(DTC-TPD). Solid-state 1 H MAS NMR experiments reveal that the greater probability of the anticonformation in P(DTS-TPD) and P(DTG-TPD) prevail in the solid phase. The conformational variation seen in solution and solid-state NMR in turn affects the polymer stacking and intermolecular interaction. Two-dimension 1 H- 1 H DQ-SQ NMR correlation spectra shows aromatic–aromatic correlations for P(DTS-TPD) and P(DTG-TPD), which on the other hand is absent for P(DTC-TPD). In a thin-film interchain packing study using grazing incidence wide-angle X-ray scattering (GIWAXS), we observe the π-face of the conjugated backbones of P(DTC-TPD) aligned edge-on to the substrate, whereas in contrast the π-faces of P(DTS-TPD) and P(DTG-TPD) align parallel to the surface. These differences in polymer conformations and backbone orientations lead to variations in the OPV performance of blends with the fullerene PC 71 BM, with the device containing P(DTC-TPD):PCBM having a lower fill factor and a lower power conversion efficiency. Ultrafast transient absorption spectroscopy shows the P(DTC-TPD):PCBM blend to have a more pronounced triplet formation from bimolecular recombination of initially separated charges. With a combination of sub-bandgap external quantum efficiency measurements and DFT calculations, we present evidence that the greater charge recombination loss is the result of a lower lying triplet energy level for P(DTC-TPD), leading to a higher rate of recombination and lower OPV device performance. In conclusion, importantly, this study ties ultimate photovoltaic performance to morphological features in the active films that are induced from the processing solution and are a result of minimal one-atom differences in polymer repeat unit structure.

36 MATERIALS SCIENCE↗

Aqueous Processed All-Polymer Solar Cells with High Open-Circuit Voltage Based on Low-Cost Thiophene–Quinoxaline Polymers

Eco-friendly solution processing and the low-cost synthesis of photoactive materials are important requirements for the commercialization of organic solar cells (OSCs). Although varieties of aqueous-soluble acceptors have been developed, the availability of aqueous-processable polymer donors remains quite limited. In particular, the generally shallow highest occupied molecular orbital (HOMO) energy levels of existing polymer donors limit further increases in the power conversion efficiency (PCE). Here, we design and synthesize two water/alcohol-processable polymer donors, poly[(thiophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-T)) and poly[(selenophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-Se)) with oligo(ethylene glycol) (OEG) side chains, having deep HOMO energy levels (~–5.4 eV). The synthesis of the polymers is achieved in a few synthetic and purification steps at reduced cost. The theoretical calculations uncover that the dielectric environmental variations are responsible for the observed band gap lowering in OEG-based polymers compared to their alkylated counterparts. Notably, the aqueous-processed all-polymer solar cells (aq-APSCs) based on P(Qx8O-T) and poly[(N,N'-bis(3-(2-(2-(2-methoxyethoxy)-ethoxy)ethoxy)-2-((2-(2-(2-methoxyethoxy)ethoxy)ethoxy)-methyl)propyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl)-alt-(2,5-thiophene)] (P(NDIDEG-T)) active layer exhibit a PCE of 2.27% and high open-circuit voltage (V OC ) approaching 0.8 V, which are among the highest values for aq-APSCs reported to date. This study provides important clues for the design of low-cost, aqueous-processable polymer donors and the fabrication of aqueous-processable OSCs with high V OC .

14 SOLAR ENERGY↗

Investigating permafrost carbon dynamics in Alaska with artificial intelligence

Abstract Positive feedbacks between permafrost degradation and the release of soil carbon into the atmosphere impact land–atmosphere interactions, disrupt the global carbon cycle, and accelerate climate change. The widespread distribution of thawing permafrost is causing a cascade of geophysical and biochemical disturbances with global impacts. Currently, few earth system models account for permafrost carbon feedback (PCF) mechanisms. This research study integrates artificial intelligence (AI) tools and information derived from field-scale surveys across the tundra and boreal landscapes in Alaska. We identify and interpret the permafrost carbon cycling links and feedback sensitivities with GeoCryoAI, a hybridized multimodal deep learning (DL) architecture of stacked convolutionally layered, memory-encoded recurrent neural networks (NN). This framework integratesin-situmeasurements and flux tower observations for teacher forcing and model training. Preliminary experiments to quantify, validate, and forecast permafrost degradation and carbon efflux across Alaska demonstrate the fidelity of this data-driven architecture. More specifically, GeoCryoAI logs the ecological memory and effectively learns covariate dynamics while demonstrating an aptitude to simulate and forecast PCF dynamics—active layer thickness (ALT), carbon dioxide flux (CO 2 ), and methane flux (CH 4 )—with high precision and minimal loss (i.e. ALT RMSE : 1.327 cm [1969–2022]; CO 2 RMSE : 0.697µmolCO 2 m −2 s −1 [2003–2021]; CH 4 RMSE : 0.715 nmolCH 4 m −2 s −1 [2011–2022]). ALT variability is a sensitive harbinger of change, a unique signal characterizing the PCF, and our model is the first characterization of these dynamics across space and time.

Environmental Sciences & Ecology↗

Momentum shift and on-shell recursion relation for electroweak theory

We study the all-line transverse (ALT) shift which we developed for on-shell recursion of amplitudes for particles of any mass. We discuss the validity of the shift for general theories of spin ≤1, and illustrate the connection between Ward identity and constructibility for massive spin-1 amplitude under the ALT shift. We apply the shift to the electroweak theory, and various four-point scattering amplitudes among electroweak gauge bosons and fermions are constructed. We show explicitly that the four-point gauge boson contact terms in massive electroweak theory automatically arise after recursive construction, independent of UV completion, and they automatically cancel the terms growing as (energy) 4 at high energy. We explore UV completion of the electroweak theory that cancels the remaining (energy) 2 terms and impose unitarity requirements to constrain additional couplings. The ALT shift framework allows consistent treatment in dealing with contact term ambiguities for renormalizable massive and massless theories, which we show can be useful in studying real-world amplitudes with massive spinors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Intrinsic Stability of Thin-Film CdS/CdTe Modules

Stability of thin-film CdTe module is crucial to the advancement of the technology. Long-term stability studies are carried out under a variety of accelerated test conditions. Accelerated-life-tests (ALT) are performed in the laboratory to accelerate degradation and hence quantify performance change in reasonably short periods of time. ALT studies attempt to simulate the conditions a solar module experiences outdoors during its lifetime, and ALT results are correlated to outdoor test results to estimate module service lifetimes, nameplate parameters, and product warranty. To accelerate degradation, laboratory experiments are often performed at elevated temperature, voltage bias and under continuous illumination. In this study laboratory size cells (0.5 cm{sup 2}), mini-modules (15 cm x 15 cm) and full-size encapsulated modules (60 cm x 120 cm) that consist of monolithically interconnected cells were subjected to different levels of illumination, elevated temperatures and electrical biases for extended periods of time. Changes in efficiency, fill-factor (FF), open-circuit voltage (Voc) and short-circuit current (Isc) as a function stress time and stress conditions are discussed.

14 SOLAR ENERGY↗

°Enhancing High Temperature Anode Performance with 2° Anchoring Phases

Project accomplishments included developing and optimizing strength testing of aluminum titanate (ALT)-doped Ni-YSZ materials and identified the dopant levels that optimized mechanical strength and enhanced electrochemical performance. We also optimized our ability to fabricate electrolyte supported button cells with anodes consisting of powders provided by Fuel Cell Energy. In several instances, those anodes were infiltrated with ALT and tested with hydrogen for 30 hours at 800°C at an applied potential of 0.4 V. Our research activities were focused in three areas: 1) mechanical strength testing on as prepared and reducced nickel-YSZ structures that were either free of a dopant or prepared by mechanically mixing in ALT at various weight percents (up to 10 wt%); 2) 24-hour electrochemical testing of electroylte supported cells having anodes made from Ni/YSZ and Ni/YSZ/ALT anodes with specific attention focused on modeling degradation rates; and 3) operando EIS and optical testing of both in-house fabricated devices as well as membrane electrode assemblies that were acquired from commercial vendors.

25 ENERGY STORAGE↗

Using field observations to inform thermal hydrology models of permafrost dynamics with ATS (v0.83)

Climate change is profoundly transforming the carbon-rich Arctic tundra landscape, potentially moving it from a carbon sink to a carbon source by increasing the thickness of soil that thaws on a seasonal basis. Thus, the modeling capability and precise parameterizations of the physical characteristics needed to estimate projected active layer thickness (ALT) are limited in Earth system models (ESMs). In particular, discrepancies in spatial scale between field measurements and Earth system models challenge validation and parameterization of hydrothermal models. A recently developed surface–subsurface model for permafrost thermal hydrology, the Advanced Terrestrial Simulator (ATS), is used in combination with field measurements to achieve the goals of constructing a process-rich model based on plausible parameters and to identify fine-scale controls of ALT in ice-wedge polygon tundra in Barrow, Alaska. An iterative model refinement procedure that cycles between borehole temperature and snow cover measurements and simulations functions to evaluate and parameterize different model processes necessary to simulate freeze–thaw processes and ALT formation. After model refinement and calibration, reasonable matches between simulated and measured soil temperatures are obtained, with the largest errors occurring during early summer above ice wedges (e.g., troughs). The results suggest that properly constructed and calibrated one-dimensional thermal hydrology models have the potential to provide reasonable representation of the subsurface thermal response and can be used to infer model input parameters and process representations. The models for soil thermal conductivity and snow distribution were found to be the most sensitive process representations. However, information on lateral flow and snowpack evolution might be needed to constrain model representations of surface hydrology and snow depth.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Using field observations to inform thermal hydrology models of permafrost dynamics with ATS (v0.83)

Climate change is profoundly transforming the carbon-rich Arctic tundra landscape, potentially moving it from a carbon sink to a carbon source by increasing the thickness of soil that thaws on a seasonal basis. However, the modeling capability and precise parameterizations of the physical characteristics needed to estimate projected active layer thickness (ALT) are limited in Earth System Models (ESMs). In particular, discrepancies in spatial scale between field measurements and Earth System Models challenge validation and parameterization of hydrothermal models. A recently developed surface/subsurface model for permafrost thermal hydrology, the Advanced Terrestrial Simulator (ATS), is used in combination with field measurements to calibrate and identify fine scale controls of ALT in ice wedge polygon tundra in Barrow, Alaska. An iterative model refinement procedure that cycles between borehole temperature and snow cover measurements and simulations functions to evaluate and parameterize different model processes necessary to simulate freeze/thaw processes and ALT formation. After model refinement and calibration, reasonable matches between simulated and measured soil temperatures are obtained, with the largest errors occurring during early summer above ice wedges (e.g. troughs). The results suggest that properly constructed and calibrated one-dimensional thermal hydrology models have the potential to provide reasonable representation of the subsurface thermal response and can be used to infer model input parameters and process representations. The models for soil thermal conductivity and snow distribution were found to be the most sensitive process representations. However, information on lateral flow and snowpack evolution might be needed to constrain model representations of surface hydrology and snow depth.

54 ENVIRONMENTAL SCIENCES↗

An evaluation of the MSBLS/nose boom interference for the approach and landing test

An analysis was performed to investigate whether or not the obstruction caused by boom-mounted probes forward of the Orbiter nose could cause Microwave Scan Beam Landing System (MSBLS) data dropout during the autoland flight phase of the Approach and Landing Test (ALT). The results indicate that there will be no interference from the nose boom to cause MSBLS data dropout for the flight conditions under which the ALT is to be performed. Additional analysis considering approach trajectories in more extreme wind conditions than anticipated for the ALT also indicates that the nose boom creates no interference.

Tate, J. M.↗

Global satellite measurements of water vapour, wind speed and wave height

The results of global measurements of atmospheric water vapor by the Seasat Scanning Multichannel Microwave Radiometer and wave height and wind speed by the Seasat altimeter (ALT) are reported. The 13.5 GHz ALT has a 3.125 ns pulsewidth and 1022 Hz repetition rate, and measures surface height to a resolution exceeding 10 cm celative to a reference ellipsoid. Full ALT data comprise 135 km equatorial groundtracks, with about a 50 cm difference of sea wave height compared to buoy reference measurements, and windspeed accuracy to within 0.25-1.58 m/sec up to 20 m/sec. Highest water vapor concentrations were observed in the tropics and the lowest at high latitudes. Wind speeds were highest for the north-east and south-east tradewinds in both the Atlantic and Pacific oceans. Average wave height is small in the summer North Hemisphere and the largest waves are in the winter Southern ocean, and lowest in western Atlantic and Pacific ocean areas where winds are lightest.

Chelton, D. B.↗

Intercomparison of wind speeds inferred by the SASS, altimeter, and SMMR

The operational theory, control algorithms, and comparisons with surface-determined wind speeds for the scatterometer (SASS), altimeter (ALT), and passive microwave radiometer (SMMR) on board the Seasat satellite are presented. Radiative scattering combining specular reflections and Bragg resonance scattering are noted to occur at tilting waves and sea foam, two conditions highly correlated with wind speed. SASS scans swaths of 70, 200, and 700 km from nadir, the SMMR covers a 150 km strip. Normalized radar sections are derived from the SASS and ALT telemetry, and brightness temperature from the SMMR. ALT winds were found to be biased about 3 m/sec low, while intercomparison between the SMMR and SASS data showed a mean difference of 0.3 m/sec with a standard deviation from measured winds of 1.7 m/sec or less. The effects of land thermal emissions, rain, and sun glint are discussed, and good viewing conditions are concluded to result in 2 m/sec accuracy.

Wentz, F. J.↗

The Mega Mesospheric Parachute

The current understanding and modeling of the upper reaches of the atmosphere is incomplete. Upper atmospheric interactions with the lower atmosphere, effects of ionizing radiation, high altitude cloud phenomena, and the dynamical interaction with the magnetosphere require greater definition. The scientific objective of obtaining a greater understanding of the upper atmosphere can be achieved by designing, implementing, testing, and utilizing a facility that provides long period in-situ measurements of the mesosphere. Current direct sub-sonic measurements of the upper atmosphere are hampered by the approximately one minute sub-sonic observation window of a ballistic sounding rocket regardless of the launch angle. In-situ measurements at greater than transonic speeds impart energy into the molecular atmospheric system and distort the true atmospheric chemistry. A long duration, sub-sonic capability will significantly enhance our ability to observe and measure: (1) mesospheric lightning phenomena (sprites and blue jets) (2) composition, structure and stratification of noctilucent clouds (3) physics of seasonal radar echoes, gravity wave phenomena (4) chemistry of mesospheric gaseous ratio mixing (5) mesospheric interaction of ionizing radiation (6) dynamic electric and magnetic fields This new facility will also provide local field measurements which complement those that can be obtained through external measurements from satellite and ground-based platforms. The 400 foot (approximately 130 meter) diameter lightweight mega-mesospheric parachute system, deployed with a sounding rocket, is proposed herein as a method to increase sub-sonic mesospheric measurement time periods by more than an order of magnitude. The report outlines a multi-year evolving science instrumentation suite in parallel with the development of the mega meso-chute facility. The developmental issues surrounding the meso-chute are chiefly materials selection (thermal and structural) and deployment mechanism physics. Three mission cases were conceived and developed to include cost and schedules estimates. Each scenario has increasing scientific utility with paralleling launch weight, parachute hang-time, deployment altitude, and parachute size: (1) Case #1: $8.4M@24 months, 6kg payload, 20 min., 50km alt., 80 m. dia. (2) Case #2: $10.4M@24 months, 6kg payload, 20 min., 60km alt, 130m. dia. (3) Case #3: $13.6M@36 months, 30kg payload, 30 min., 90km alt., 200m. dia. The initial breakout cost for the parachute system is approximately $2M@24 months. This report identifies that although the challenges of the mega-meso-chute may be difficult, they can be surmounted and valuable results can be achieved.

Kloesel, Kurt J.↗

New understandings of failure modes in SSL luminaires

As SSL products are being rapidly introduced into the market, there is a need to develop standard screening and testing protocols that can be performed quickly and provide data surrounding product lifetime and performance. These protocols, derived from standard industry tests, are known as ALTs (accelerated life tests) and can be performed in a timeframe of weeks to months instead of years. Accelerated testing utilizes a combination of elevated temperature and humidity conditions as well as electrical power cycling to control aging of the luminaires. In this study, we report on the findings of failure modes for two different luminaire products exposed to temperature-humidity ALTs. LEDs are typically considered the determining component for the rate of lumen depreciation. However, this study has shown that each luminaire component can independently or jointly influence system performance and reliability. Material choices, luminaire designs, and driver designs all have significant impacts on the system reliability of a product. From recent data, it is evident that the most common failure modes are not within the LED, but instead occur within resistors, capacitors, and other electrical components of the driver. Insights into failure modes and rates as a result of ALTs are reported with emphasis on component influence on overall system reliability.

Shepherd, Sarah D↗

Bemnifosbuvir: An HCV NS5B Inhibitor With Multiple Modes of Action

Bemnifosbuvir (BEM) is a potent, pan-genotypic inhibitor targeting the hepatitis C virus (HCV) NS5B polymerase. Its antiviral activity was evaluated in an ascending dose phase I clinical trial involving 30 patients treated once a day for 7 days. After treatment initiation, plasma HCV RNA declined in a biphasic manner with a mean reduction of 2.3 log 10 IU/mL after 24 hours and 4.4 log10 IU/mL by day 7 for the highest dose. Alanine aminotransferase (ALT) also normalized in most patients. We employed a multiscale mathematical model fitted to the HCV RNA and ALT dynamics to quantify the antiviral activity and evaluate the modes of action of BEM. We found that models in which BEM only acted as a typical HCV RNA polymerase inhibitor and reduced the intracellular production of HCV RNA did not fit the data as well as models in which BEM had multiple modes of action, including suppressing viral assembly and secretion and enhancing intracellular HCV RNA degradation. BEM's effectiveness in inhibiting intracellular HCV RNA production increased with dose (150 mg/day: 88.2%, 300 mg/day: 98.8%, 600 mg/day: 99.5%), while inhibition of viral assembly and release was ~95% effective regardless of dose. We observed a dose-dependent enhancement in the degradation of intracellular HCV RNA, with degradation rates 1.5-fold higher in patients receiving 300 mg/day and 2.7-fold higher in those receiving 600 mg/day than in patients receiving 150 mg/day. No significant differences in antiviral activity were detected between HCV genotypes 1b and 3 or between patients with and without compensated cirrhosis.

59 BASIC BIOLOGICAL SCIENCES↗