Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMMONIUM COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Tricritical point in ferroelastic ammonium titanyl fluoride: NMR study

Ionic mobility and phase transitions in ammonium titanyl pentafluoride (NH{sub 4}){sub 3}TiOF{sub 5} were studied using the {sup 19}F and {sup 1}H NMR data. The high-temperature phase (I) is characterized by spherically symmetric (isotropic) reorientation of [TiOF{sub 5}]{sup 3-} anions and by uniaxial reorientation of these anions in the ferroelastic phase II. A previously unknown second-order phase transition to the low-temperature modification (NH{sub 4}){sub 3}TiOF{sub 5}(III) was found at 205 K. The transition is accompanied by hindering of uniaxial rotations of [TiOF{sub 5}]{sup 3-} anions and by noticeable change of {sup 19}F magnetic shielding tensor associated with the influence of pseudo-Jahn-Teller effect. A pressure-induced tricritical point with coordinates p{sub TCR{approx}}2 kbar and T{sub TCR{approx}}170 K is estimated on the base of {sup 19}F NMR chemical shift data, and previously studied p-T diagram of (NH{sub 4}){sub 3}TiOF{sub 5}. - Graphical abstract: p-T phase diagram of (NH{sub 4}){sub 3}TiOF{sub 5}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solvothermal synthesis and luminescence properties of monodisperse Gd{sub 2}O{sub 3}:Eu{sup 3+} and Gd{sub 2}O{sub 3}:Eu{sup 3+}SiO{sub 2} nanospheres

A series of uniform, monodispersed Gd(OH){sup 3}:Eu{sup 3+} nanospheres less than 100 nm were successfully synthesized with iron ions as catalyst and DMF as solvent under the solvothermal condition. Cetyltrimethyl ammonium bromide (CTAB) and Polyvinylpyrrolidone (PVP) were performed as co-surfactant during this facile procedure should be changed as A series of uniform, monodisperse Gd(OH){sup 3}:Eu{sup 3+} nanospheres less than 100 nm in diameter were successfully synthesized with solvothermal method. Iron ion was used as catalyst and Dimethylformamide (DMF) as solvent, Cetyltrimethyl Ammonium Bromide (CTAB) and Polyvinylpyrrolidone (PVP) were performed as surfactants. Further calcination process was applied to prepare Gd{sub 2}O{sub 3}:Eu{sup 3+} nanoshpheres during this facile procedure. -- Graphical abstract: Uniform and monodisperse Gd{sub 2}O{sub 3}:Eu{sup 3+} and Gd{sub 2}O{sub 3}:Eu{sup 3+}SiO{sub 2} monodisperse were synthesized by annealed relative parent's Gd(OH){sub 3}:Eu{sup 3+} and Gd(OH){sub 3}:Eu{sup 3+}SiO{sub 2}, respectively. Their morphology and luminescence properties all strongly depended on the iron concentration. Display Omitted

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Influence of surfactants on the morphology of SnO{sub 2} nanocrystals prepared via a hydrothermal method

Nanoscaled SnO{sub 2} with different morphologies has been synthesized via a simple hydrothermal process at 180 Degree-Sign C using polyvinylpyrrolidone (PVP), sodium dodecyl sulfonate (SDS), cetyl trimethyl ammonium bromide (CTAB) or tetrapropyl ammonium bromide (TPAB) as surfactant. All the prepared SnO{sub 2} are of a tetragonal crystal structure. Nanocubes, nanorods, nanosheets, nanobelts and nanoparticles were prepared when changing the type and dosage of organic surfactants. It is shown that anionic surfactant (SDS) and cationic surfactant (CTAB or TPAB) at their suitable addition amounts can largely influence the morphologies of SnO{sub 2} nanocrystals. The effect is significantly dependent on the solvent types: water or ethanol. The non-ionic surfactant (PVP) can also change the morphologies like SDS but the impacts are less obvious. The effect of surfactants on the shape and size of SnO{sub 2} nanoparticles was discussed in detail. The particle growth mechanism is described based on the electrostatic interactions and Van der Waals' forces. - Graphical abstract: SnO{sub 2} nanocrystals with controllable morphologies were prepared via a hydrothermal method with surfactants. Highlights: Black-Right-Pointing-Pointer SnO{sub 2} nanocrystals were prepared via a hydrothermal method with surfactants. Black-Right-Pointing-Pointer SnO{sub 2} morphologies changed with the type and the dosage of surfactants. Black-Right-Pointing-Pointer The effect of surfactants on the growth of crystal planes was studied. Black-Right-Pointing-Pointer The controlling mechanisms of surfactants on SnO{sub 2} morphologies were discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reversible flexible structural changes in multidimensional MOFs by guest molecules (I{sub 2}, NH{sub 3}) and thermal stimulation

Three metal–organic frameworks (MOFs), [Cu(INA){sub 2}], [Cu(INA){sub 2}I{sub 2}] and [Cu(INA){sub 2}(H{sub 2}O){sub 2}(NH{sub 3}){sub 2}], were synthesized with 3D, 2D, and 0D structures, respectively. Reversible flexible structural changes of these MOFs were reported. Through high temperature (60–100 °C) stimulation of I{sub 2} or ambient temperature stimulation of NH{sub 3}, [Cu(INA){sub 2}] (3D) converted to [Cu(INA){sub 2}I{sub 2}] (2D) and [Cu(INA){sub 2}(H{sub 2}O){sub 2}(NH{sub 3}){sub 2}] (0D); as the temperature increased to 150 °C, the MOFs changed back to their original form. In this way, this 3D MOF has potential application in the capture of I{sub 2} and NH{sub 3} from polluted water and air. XRD, TGA, SEM, NH{sub 3}-TPD, and the measurement of gas adsorption were used to describe the changes in processes regarding the structure, morphology, and properties. - Graphical abstract: Through I{sub 2}, NH{sub 3} molecules and thermal stimulation, the three MOFs can achieve reversible flexible structural changes. Different methods were used to prove the flexible reversible changes. - Highlights: • [Cu(INA){sub 2}] can flexible transform to [Cu(INA){sub 2}I{sub 2}] and [Cu(INA){sub 2}(H{sub 2}O){sub 2}(NH{sub 3}){sub 2}] by adsorbing I{sub 2} or NH{sub 3}. • The reversible flexible transformation related to material source, temperature and concentration. • Potential applications for the capture of I{sub 2} and NH{sub 3} from polluted water or air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile synthesis of high surface area molybdenum nitride and carbide

The synthesis of high surface area γ-Mo{sub 2}N and α-Mo{sub 2}C is reported (116 and 120 m{sup 2}/g) without the temperature programmed reduction of MoO{sub 3}. γ-Mo{sub 2}N was prepared in an NH{sub 3}-free synthesis using forming gas (7 at% H{sub 2}, N{sub 2}-balance) as the reactive atmosphere. Three precursors were studied ((NH{sub 4}){sub 6}Mo{sub 7}O{sub 24}·4H{sub 2}O, (NH{sub 4}){sub 2} Mg(MoO{sub 4}){sub 2}, and MgMoO{sub 4}) along with the sacrificial support method (SSM) as a means of reducing the particle size of Mo{sub 2}N and Mo{sub 2}C. In situ X-ray diffraction (XRD) studies were carried out to identify reaction intermediates, the temperature at which various intermediates form, and the average domain size of the Mo{sub 2}N products. Materials were synthesized in bulk and further characterized by XRD, HRTEM, XPS, and BET. - Highlights: • Facile synthesis of γ-Mo2N and α-Mo2C with surface area exceeding 100 m{sup 2}/g. • Sacrificial support method was used to achieve these high surface areas. • Materials can serve as catalysts or supports in (electro)chemical processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and catalytic activity of the metastable phase of gold phosphide

Recently, transition metal phosphides have found new applications as catalysts for the hydrogen evolution reaction that has generated an impetus to synthesize these materials at the nanoscale. In this work, Au{sub 2}P{sub 3} was synthesized utilizing the high temperature decomposition of tri-n-octylphosphine as a source of elemental phosphorous. Gold nanorods were used as morphological templates with the aim of controlling the shape and size of the resulting gold phosphide particles. We demonstrate that the surface capping ligand of the gold nanoparticle precursors can influence the purity and extent to which the gold phosphide phase will form. Gold nanorods functionalized with 1-dodecanethiol undergo digestive ripening to produce discrete spherical particles that exhibit reduced reactivity towards phosphorous, resulting in low yields of the gold phosphide. In contrast, gold phosphide was obtained as a phase pure product when cetyltrimethylammonium bromide functionalized gold nanorods are used instead. The Au{sub 2}P{sub 3} nanoparticles exhibited higher activity than polycrystalline gold towards the hydrogen evolution reaction. - Graphical abstract: Au{sub 2}P{sub 3} was synthesized utilizing the high temperature decomposition of tri-n-octylphosphine as a source of elemental phosphorous and gold nanoparticles as reactants. We demonstrate that the surface capping ligand of the gold nanoparticle precursors influence the purity and extent to which the Au{sub 2}P{sub 3} phase will form. Gold nanorods functionalized with 1-dodecanethiol undergo digestive ripening to produce discrete spherical particles that exhibit reduced reactivity towards phosphorous, resulting in low yields of the gold phosphide. In contrast, gold phosphide was obtained as a phase pure product when cetyltrimethylammonium bromide functionalized gold nanoparticles are used instead. The Au{sub 2}P{sub 3} nanoparticles exhibited higher activity than polycrystalline gold towards the hydrogen evolution reaction. - Highlights: • The surface chemistry of gold affects the synthetic yields of Au{sub 2}P{sub 3}. • Imaging of Au{sub 2}P{sub 3} with transmission electron microscopy results in decomposition. • Au{sub 2}P{sub 3} nanoparticles exhibit activity towards the hydrogen evolution reaction.

36 MATERIALS SCIENCE↗

Enhanced performance of dye-sensitized solar cells based on organic dopant incorporated PVDF-HFP/PEO polymer blend electrolyte with g-C{sub 3}N{sub 4}/TiO{sub 2} photoanode

This work describes the effect of 2-aminopyrimidine (2-APY) on poly(vinylidinefluoride-co-hexafluoropropylene) (PVDF-HFP)/polyethylene oxide (PEO) blend polymer electrolyte along with binary iodide salts (tetrabutylammonium iodide (TBAI) and potassium iodide (KI)) and iodine (I{sub 2}) were studied for enhancing the efficiency of the dye-sensitized solar cells (DSSCs) consisting of g-C{sub 3}N{sub 4}/TiO{sub 2} composite as photoanode. The g-C{sub 3}N{sub 4} was synthesized from low cost urea by thermal condensation method. It was used as a precursor to synthesize the various weight percentage ratios (5%, 10% and 15%) of g-C{sub 3}N{sub 4}/TiO{sub 2} composites by wet-impregnation method. The pure and 2-APY incorporated PVDF-HFP/PEO polymer blend electrolytes were arranged by wet chemical process (casting method) using DMF as a solvent. The synthesized g-C{sub 3}N{sub 4}/TiO{sub 2} composites and polymer blend electrolytes were studied and analyzed by Fourier transform infrared (FT-IR) spectroscopy, X-ray diffractometer (XRD) and scanning electron microscopy (SEM). The ionic conductivity values of the pure and 2-APY incorporated PVDF-HFP/PEO blend electrolytes were estimated to be 4.53×10{sup −5} and 1.87×10{sup −4} Scm{sup −1} respectively. The UV–vis absorption spectroscopy was carried out for the pure and different wt% of g-C{sub 3}N{sub 4}/TiO{sub 2} composites coated FTO films after N3 dye-sensitization. The 10 wt% g-C{sub 3}N{sub 4}/TiO{sub 2} composite film showed a maximum absorption compared to the others. The DSSC assembled with 10 wt% g-C{sub 3}N{sub 4}/TiO{sub 2} as photoanode using the pure polymer blend electrolyte exhibited a power conversion efficiency (PCE) of 3.17% , which was superior than that of DSSC based pure TiO{sub 2} (2.46%). However, the PCE was increased to 4.73% for the DSSC assembled using 10 wt% g-C{sub 3}N{sub 4}/TiO{sub 2} as photoanode with 2-APY incorporated polymer blend electrolyte. Hence, the present study is a successful attempt to provide a new pathway to enhance the performance of DSSCs. - Graphical abstract: In this study, the g-C{sub 3}N{sub 4} was synthesized from low cost urea and it was used as a precursor to synthesize of g-C{sub 3}N{sub 4}/TiO{sub 2} composite. The pure and 2-APY incorporated PVDF-HFP/PEO electrolytes were fabricated by solution casting method. A remarkably enhanced PCE of 4.73% was observed for 2-APY incorporated PVDF-HFP/PEO electrolyte with g-C{sub 3}N{sub 4}/TiO{sub 2} composite photoanode based DSSC. - Highlights: • 2-APY added PVDF-HFP/PEO electrolyte was prepared by solution casting method. • The g-C{sub 3}N{sub 4}/TiO{sub 2} composites were synthesized by wet-impregnation method. • DSSC with g-C{sub 3}N{sub 4}/TiO{sub 2} and 2-APY added electrolyte showed the efficiency of 4.73 %. • The g-C{sub 3}N{sub 4} and 2-APY can be a useful dopant to enhance the performance of DSSCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of MCM-41 fibers with well-ordered hexagonal mesostructure controlled in acidic and alkaline media

In this paper, synthesis and characterization of two type morphologies of the MCM-41mesoporous material, nano and microfibers, were investigated by electrospinning technique. The synthesis was performed in acidic and alkaline media, separately. The MCM-41 morphologies were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), x-ray powder diffraction (XRD), and nitrogen adsorption–desorption measurement. Tetraethylorthosilicate (TEOS) and cetyltrimethylammonium bromide (CTAB) were used as silica and template sources for the synthesis of MCM-41 morphologies, respectively. The SEM results showed that MCM-41 nanofibers were spun in acidic media and microfibers of MCM-41 were produced in alkaline media. The XRD study revealed a long range structural ordering of mesoporous materials. The TEM results indicated rough surfaces with uniform average diameter 200 nm for nanofibers and 2 µm for microfibers. The pore diameter and surface area of calcined MCM-41 nanofibers were 2.2 nm and 970 m{sup 2}/g, respectively. For the MCM-41 microfibers, pore sizes of 2.7 nm and surface areas 420 m{sup 2}/g was measured. - Graphical abstract: Electrospinning method was used for fabricating of MCM-41 microfibers from TEOS in alkaline media (top) and MCM-41 nanofibers in acidic media (bottom). - Highlights: • Synthesis of MCM-41 nanofibers and microfibers by electrospinning technique. • MCM-41 nanofibers were synthesized in acidic media. • MCM-41 manofibers spun in alkaline media. • Electrospinning was a simple method for preparing of fibers with respect to chemical method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of PbI{sub 2} deposition rate on two-step PVD/CVD all-vacuum prepared perovskite

In this work we fabricate all-vacuum processed methyl ammonium lead halide perovskite by a sequence of physical vapour deposition of PbI{sub 2} and chemical vapour deposition (CVD) of CH{sub 3}NH{sub 3}I under a static atmosphere. We demonstrate that for higher deposition rate the (001) planes of PbI{sub 2} film show a higher degree of alignment parallel to the sample's surface. From X-ray diffraction data of the resulted perovskite film we derive that the intercalation rate of CH{sub 3}NH{sub 3}I is fostered for PbI{sub 2} films with higher degree of (001) planes alignment. The stoichiometry of the produced perovskite film is also studied by Hard X-ray photoelectron spectroscopy measurements. Complete all-vacuum perovskite solar cells were fabricated on glass/ITO substrates coated by an ultra-thin (5 nm) Zn-phthalocyanine film as hole selective layer. A dependence of residual PbI{sub 2} on the solar cells performance is displayed, while photovoltaic devices with efficiency up to η=11.6% were achieved. - Graphical abstract: A two-step PVD/CVD processed perovskite film with the CVD intercalation rate of CH{sub 3}NCH{sub 3} molecules been fostered by increasing the PVD rate of PbI{sub 2} and prolonging the CVD time. - Highlights: • A simple PVD/CVD process for perovskite film production. • Increased PVD rate yields better alignment of the PbI{sub 2} (001) crystallite planes. • CH{sub 3}NH{sub 3}I intercalation process fostered by increased PbI{sub 2} PVD rate. • Stoichiometric CH{sub 3}NH{sub 3}PbI{sub 3} suitable as absorber in photovoltaic applications • Reduced PbI{sub 2} residue at the bottom of CH{sub 3}NH{sub 3}PbI{sub 3} improves device performance.

36 MATERIALS SCIENCE↗

Surfactant-assisted hydrothermal synthesis of TiO{sub 2}/reduced graphene oxide nanocomposites and their photocatalytic performances

Titanium dioxide/reduced graphene oxide nanocomposites (TiO{sub 2}/RGO-X, X=S, T or C, was denoted sodium dodecyl benzene sulfonate, Triton X-100 and cetyl trimethyl ammonium bromide, respectively) were synthesized using a one-step surfactant-assisted hydrothermal method. The characterization of phase structure and morphology of the as-obtained nanocomposites reveals that TiO{sub 2} in the TiO{sub 2}/RGO-X exhibits the morphologies of nanoparticles, nanowires and array-like nanowires on the surface of RGO, respectively. Compared with the control TiO{sub 2}/RGO nanocomposite, TiO{sub 2}/RGO-X presents an excellent photocatalytic activity. With uniform array-like TiO{sub 2} nanowires on the surface of RGO, the TiO{sub 2}/RGO-C shows a significant enhancement in the photocatalytic efficiency. Besides, a deeper insight into the growth mechanism of TiO{sub 2}/RGO nanocomposites is put forward. This work indicates that the surfactant-assisted hydrothermal method is an effective approach to improve the structure, morphology and photocatalytic performance of TiO{sub 2}/RGO composites. Moreover, the surfactants with various types can interact with the precursors of TiO{sub 2} and RGO in different ways. - Graphical abstract: Illustration of the preparation processes and their photocatalytic performances of TiO{sub 2}-based nanocomposites Display Omitted - Highlights: • TiO2/RGO synthesized with different surfactants show diverse morphologies. • The growth mechanisms of TiO2/RGO assisted with surfactants are deep researched. • With the assistance of CTAB, TiO2/RGO-C contains uniform array-like TiO2 nanowire. • TiO2/RGO-C exhibits a significant enhancement of its photocatalytic efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The characterizations of rheological, electrokinetical and structural properties of ODTABr/MMT and HDTABr/MMT organoclays

In the present paper, we have investigated as a function of surfactant concentration the rheological (yield value, plastic viscosity) and electrokinetic (mobility, zeta potential) properties of montmorillonite (MMT) dispersions. The influence of surfactants (Octadeccyltrimethylammonium bromide, ODTABr and Hexadecyltrimethylammonium bromide, HDTABr) on dispersions of Na-activated bentonite was evaluated by rheological and electrokinetic measurements, and X-ray diffraction (XRD) studies. The interactions between clay minerals and surfactants in water-based Na-activated MMT dispersions (2 wt.%) were examined in detail using rheologic parameters, such as viscosity, yield point, apparent and plastic viscosity, hysteresis area, and electrokinetic parameters of mobility and zeta potentials, and XRD also analyses helped to determine swelling properties of d-spacings. MMT and organoclay dispersions showed Bingham Plastic flow behavior. The zeta potential measurements displayed that the surfactant molecules hold on the clay particle surfaces and the XRD analyses displayed that they get into the basal layers.

36 MATERIALS SCIENCE↗

Structural and optical characterization of tin dioxide nanoparticles prepared by a surfactant mediated method

In this study tin dioxide nanoparticles were synthesized using a cationic surfactant (cetyl-trimethyl ammonium bromide) as the organic template and the hydrous tin chloride and liquid ammonia as the inorganic precursor. Samples were characterized by X-ray diffraction, transmission electron microscopy and UV-visible absorption, photoluminescence and Raman spectroscopy. The X-ray diffraction pattern of the as prepared sample is indexed to rutile phase of tin dioxide without any trace of an extra phase and particle size 7-8 nm which is further confirmed by electron microscopy. The UV-visible spectrum shows that the absorption edge is blue shifted and the band gap of the prepared sample is 4.0 eV which is larger than the bulk tin dioxide (3.6 eV).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis of Zn/Co/Fe-layered double hydroxide nanowires with controllable morphology in a water-in-oil microemulsion

The Zn/Co/Fe-layered double hydroxide nanowires were synthesized via a reverse microemulsion method by using cetyltrimethyl ammonium bromide (CTAB) /n-hexane/n-hexanol/water as Soft-Template. ZnSO{sub 4}, CoSO{sub 4}, Fe{sub 2}(SO{sub 4}){sub 3} and urea were used as raw materials. The influence of reaction temperature, time, urea concentration and Cn (molar ratio of cetyltrimethyl ammonium bromide to water) on the structure and morphology of Zn/Co/Fe-layered double hydroxides was investigated. The samples were characterized using Transmission Electron Microscopy (TEM), Inductively Coupled Plasma (ICP), X-ray Diffraction (XRD) and Infrared Absorption Spectrum (IR). The results indicate that higher temperature is beneficial to the formation of layered double hydroxides, but particles apart from nanowires could be produced if temperature is up to 120 deg. C. By varying the temperature, reaction time, urea concentration and Cn, we got the optimum conditions of synthesizing uniform Zn/Co/Fe-layered double hydroxide nanowires: 100 deg. C, more than 12 h, Cn: 30-33, urea concentration: 0.3 M.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Lamellar {gamma}-AlOOH architectures: Synthesis and application for the removal of HCN

Using hexadecyl trimethyl ammonium bromide (CTAB) as a structure-directing agent and precipitator, the complete synthesis of lamellar {gamma}-AlOOH architectures was successfully accomplished via a hydrothermal route. Different product structures were obtained by varying the molar ratio of aluminum nitrate and CTAB. Several techniques, including X-ray powder diffraction, Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, transmission electron microscopy, and differential scanning calorimetry thermal analysis, were used to characterize the products. The effects of CTAB concentration, reaction temperature and time, and the molar ratio of Al{sup 3+}/CTAB on the product morphologies were investigated. The nitrogen adsorption and desorption measurements indicated that the {gamma}-AlOOH architectures possess a Brunauer-Emmett-Teller surface area of approximately 75.02 m{sup 2}/g. It was also demonstrated that 10 mg {gamma}-AlOOH architectures can remove 45.3% of the HCN (1.68 {mu}g/mL) from model wastewater. When 0.03 mg/cig {gamma}-AlOOH architectures were combined with cigarette paper, 8.12% of the present HCN was adsorbed. These results indicate that lamellar {gamma}-AlOOH architectures may be a potential adsorbent for removing HCN from highly toxic pollutant solutions and harmful cigarette smoke. Highlights: Black-Right-Pointing-Pointer Hexadecyl trimethyl ammonium bromide (CTAB) was used as a structure-directing agent and precipitator. Black-Right-Pointing-Pointer Hydrothermal treatment enables growth of lamellar {gamma}-AlOOH architectures. Black-Right-Pointing-Pointer Lamellar {gamma}-AlOOH architectures were demonstrated to exhibit high BET surface area and excellent adsorptive capacity. Black-Right-Pointing-Pointer HCN in contaminated water and cigarette smoke can be effectively removed by the prepared lamellar {gamma}-AlOOH superstructures.

36 MATERIALS SCIENCE↗

Fabrication of nanotube arrays on commercially pure titanium and their apatite-forming ability in a simulated body fluid

In this study, we investigated self-organized TiO{sub 2} nanotubes that were grown using anodization of commercially pure titanium at 5 V or 10 V in NH{sub 4}F/NaCl electrolyte. The nanotube arrays were annealed at 450 °C for 3 h to convert the amorphous nanotubes to anatase and then they were immersed in simulated body fluid at 37 °C for 0.5, 1, and 14 days. The purpose of this experiment was to evaluate the apatite-formation abilities of anodized Ti nanotubes with different tube diameters and lengths. The nanotubes that formed on the surfaces of Ti were examined using a field emission scanning electron microscope, X-ray diffraction, and X-ray photoelectron spectroscope. When the anodizing potential was increased from 5 V to 10 V, the pore diameter of the nanotube increased from approximately 24–30 nm to 35–53 nm, and the tube length increased from approximately 590 nm to 730 nm. In vitro testing of the heat-treated nanotube arrays indicated that Ca-P formation occurred after only 1 day of immersion in simulated body fluid. This result was particularly apparent in the samples that were anodized at 10 V. It was also found that the thickness of the Ca-P layer increases as the applied potential for anodized c.p. Ti increases. The average thickness of the Ca-P layer on Ti that was anodized at 5 V and 10 V was approximately 170 nm and 190 nm, respectively, after immersion in simulated body fluid for 14 days. - Highlights: • TiO{sub 2} nanotube on Ti surface was formed by anodic oxidation in a NaCl/NH{sub 4}F solution. • TiO{sub 2} layers show a tube length of 590 nm and 730 nm at 5 V and 10 V, respectively. • After soaking in SBF, Ca-P layer completely covered the entire nanotubular surfaces. • The Ca-P layer was thicker on the Ti surface anodized at 10 V.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Deposition of transparent conductive mesoporous indium tin oxide thin films by a dip coating process

Cetyltrimethyl ammonium bromide (CTAB) templated mesoporous indium tin oxide (ITO) thin films were deposited on quartz plates by an evaporation-induced self-assembly (EISA) process using a dip coating method. The starting solution was prepared by mixing indium chloride, tin chloride, and CTAB dissolved in ethanol. Five to fifty mole percent Sn-doped ITO films were prepared by heat-treatment at 400 deg. C for 5 h. The structural, adsorptive, electrical, and optical properties of mesoporous ITO thin films were investigated. Results indicate that the mesoporous ITO thin films have an ordered two-dimensional hexagonal (p6mm) structure, with nanocrystalline domains in the inorganic oxide framework. The continuous thin films have highly ordered pore sizes (>20 A), high Brunauer-Emmett-Teller (BET) surface area up to 340 m{sup 2}/g, large pore volume (>0.21 cm{sup 3}/g), outstanding transparency in the visible range (>80%), and show a minimum resistivity of {rho} = 1.2 x 10{sup -2} {omega} cm.

36 MATERIALS SCIENCE↗

Preparation of poly(aniline-co-o-anisidine)-intercalated mesostructured manganese oxide composites by exchange reaction

Layered mesostructured manganese oxide (mesostructured MnO{sub 2}) was synthesized using manganese chloride and lithium hydroxide as the raw materials and cetyltrimethylammonium bromide (CTAB) as the structure-directing agent. Poly(aniline-co-o-anisidine)-intercalated mesostructured MnO{sub 2} composites (P(An-co-oAs)/MnO{sub 2}) were synthesized in an organic solvent through the exchange reaction between the CTAB in MnO{sub 2} gallery and the P(An-co-oAs). The interlayer spacing (I{sub c} values) of mesostructured MnO{sub 2} enlarged from 2.52 to 4.41 nm as the added amount of P(An-co-oAs) increased from 0 to 0.5 g per 0.5 g of mesostructured MnO{sub 2}. The regularity of the layered structure of the composites was firstly decreased due to intercalation of low amounts of P(An-co-oAs). However, with increasing the intercalated amount of P(An-co-oAs) the layered structure of the composites becomes more regular. The electrical conductivity of the composites is 10{sup 2} to 10{sup 3} times higher than that of the mesostructured MnO{sub 2}.

36 MATERIALS SCIENCE↗

Changes in the surfaces on DDOAB organoclays adsorbed with paranitrophenol-An XRD, TEM and TG study

The adsorption of paranitrophenol on organoclays synthesised by the ion exchange of the surfactant molecule dimethyldioctadecylammonium bromide (DDOAB) of formula (CH{sub 3}(CH{sub 2}){sub 17}){sub 2}NBr(CH{sub 3}){sub 2} has been studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and thermogravimetric analysis. The expansion of the montmorillonite depends on the loading of the montmorillonite with dimethyldioctadecylammonium bromide and is related to the arrangement of the surfactant molecules within the clay interlayer. This expansion is altered by the adsorbed paranitrophenol and is observed in the transmission electron microscopic images of the organoclay with adsorbed paranitrophenol. Changes in the surfactant molecular arrangements were analysed by thermogravimetry. The paranitrophenol is sublimed simultaneously with the loss of surfactant. The dehydroxylation temperature of the montmorillonite is decreased upon adsorption of the paranitrophenol indicating a bonding between the paranitrophenol and the hydroxyl units of the montmorillonite.

36 MATERIALS SCIENCE↗