Search NASA⌕ Search

SEARCH · Search NASA

Results for “ASH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Signatures of rare earth element distributions in fly ash derived from the combustion of Central Appalachian, Illinois, and Powder River basin coals

We report the distribution of Rare Earth elements (REE) in coal-derived fly ashes can have distinctive patterns when fly ashes are produced from different coals within or between basins, such as the Pennsylvanian Class F fly ashes from the Illinois and Central Appalachian basins. Both the Fire Clay coal and a blend of a number of eastern Kentucky coals show strong Gd peaks and an H-type distribution in the Upper Continental Crust-corrected plots. The Fire Clay coal-derived ash has a higher heavy REE concentration than the blended coal-derived ash. The Illinois Basin-derived fly as has an overall lower REE concentration than the latter ashes. Class C fly ash derived from Powder River Basin coals has, with the exception of an Eu peak, a flatter distribution of REE and an overall L-type or indistinct H- versus L-type distribution. The signatures of the REE in fly ashes may be useful in predicting their behavior in the extraction of the REE; simple extrapolations from the basic concentrations and the predicted extraction percentages for ashes from different basins are not necessarily indicative of the actual distribution of the extracted REE.

01 COAL, LIGNITE, AND PEAT↗

Investigation on the fly ash thermal treatment on the performance of Lithium Ferriphosphate (LiFePO{sub 4}) battery

Addition of the fly ash can be used to improve the capacity of LiFePO{sub 4} battery. Fly ash was added in Acethylene Black (AB) as 2% of the total weight of Acetylene Black (AB). The effects of temperature variation and fly ash characteristics were analyzed. Fly ash was prepared by heating at 50, 100, 150, and 250°C in muffle furnace for 5 hours and passed in 200 mesh screen prior to mixing it with other compounds. Lithium Ferriphospat (LiFePO{sub 4}), fly ash, Acethylene Black (AB), Polyvinylidene Fluoride (PVDF) as a binder and N-methyl-2-pyrrolidone (NMP) as a solvent were mixed to be slurry. The slurry were coated, dried and hot pressed to make a cathode film. The performance of battery lithium was examined by eight channel battery analyzer. The composition of the fly ash was examined by X-ray fluorescence spectrometry (XRF) and Fourier Tansform Infrared Spectroscopy (FTIR). The excellent performance was shown in the fly ash addition which were treated by heating at 150°C. The capacity of fly ash added LiFePO{sub 4} battery is 94.373 mAh/g, which is higher than that of without fly ash addition, i.e. 67.998 mAh/g.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Final Technical Report: Plasma Arc Gasification Based Rare Earth Element Recovery from Coal Fly Ash

Southern Research, as the primary awardee, with sub-awardees ArcSec Technologies, LLC (ArcSec) and Reaction Engineering International (REI) have investigated a plasma arc based thermal process intended to concentrate rare earth elements (REE) from coal fly ash. Successful demonstration of the technology would contribute to the effort for realizing a competitive, domestic REE value chain thereby reducing U.S. dependence on foreign supply, maintaining national security interests, and creating opportunities for economic growth. The originally proposed concept included two technology options – 1) a smelting process and 2) a smelting plus vaporization and condensation process. For both options, coal fly ash would be smelted in a plasma arc heated furnace under reducing conditions to separate ash into molten slag and reduced metal (primarily iron) phases. During smelting, it was expected that the REE would also be reduced to metals and partition mostly to the iron phase. During the first year of work, sample coal ash feedstocks were acquired and characterized, feasibility of the smelting process was evaluated in bench-scale experiments, and the vaporization/condensation process was investigated through equilibrium and CFD modeling studies. From the feedstock characterization, REE content for the coal ash samples obtained was measured to be in the range of 302 – 1219 ppm with average at 537 ppm. Though it was successfully demonstrated that ash could be separated into slag and metal phases, the bench-scale experiments were only marginally successful at collecting REE in the metal phase. Producing REE concentrates near the DOE goal of 2%, however, has not been achieved. From the modeling studies, the vaporization/condensation process was predicted to be effective for separating individual REE and producing enriched metal fractions with total REE content higher than 2%, provided the smelting process performed as intended. Supplemental smelting experiments and thermodynamic modeling studies, conducted during the second year of work, indicated a number of technical modifications that could lead to producing higher REE concentrates from coal ash. The strategy shifted to reducing as much of the ash oxides to metals as possible, leaving the REE more concentrated in the remaining slag. Results from later experiments based on the modified approach showed improvements in REE recovery and concentration levels in smelted products. SEM-EDS analyses on product specimens showed agglomerations of reduced metal REE crystals at much larger length-scales as compared to REE content in raw ash.

01 COAL, LIGNITE, AND PEAT↗

On the Flow of a Cement Suspension: The Effects of Nano-Silica and Fly Ash Particles

Additives such as nano-silica and fly ash are widely used in cement and concrete materials to improve the rheology of fresh cement and concrete and the performance of hardened materials and increase the sustainability of the cement and concrete industry by reducing the usage of Portland cement. Therefore, it is important to study the effect of these additives on the rheological behavior of fresh cement. In this paper, we study the pulsating Poiseuille flow of fresh cement in a horizontal pipe by considering two different additives and when they are combined (nano-silica, fly ash, combined nano-silica, and fly ash). To model the fresh cement suspension, we used a modified form of the power-law model to demonstrate the dependency of the cement viscosity on the shear rate and volume fraction of cement and the additive particles. The convection–diffusion equation was used to solve for the volume fraction. After solving the equations in the dimensionless forms, we conducted a parametric study to analyze the effects of nano-silica, fly ash, and combined nano-silica and fly ash additives on the velocity and volume fraction profiles of the cement suspension. According to the parametric study presented here, larger nano-silica content results in lower centerline velocity of the cement suspension and larger non-uniformity of the volume fraction. Compared to nano-silica, fly ash exhibits an opposite effect on the velocity. Larger fly ash content results in higher centerline velocity, while the effect of the fly ash on the volume fraction is not obvious. For cement suspension containing combined nano-silica and fly ash additives, nano-silica plays a dominant role in the flow behavior of the suspension. The findings of the study can help the design and operation of the pulsating flow of fresh cement mortars and concrete in the 3D printing industry.

36 MATERIALS SCIENCE↗

Impact of Collection Equipment on Ash Variability of Baled Corn Stover Biomass for Bioenergy

Cost-effective conversion of agricultural residues for renewable energy hinges not only on the material’s quality but also the biorefinery’s ability to reliably measure quality specifications. The ash content of biomass is one such specification, influencing pretreatment and disposal costs for the conversion facility and the overall value of a delivered lot of biomass. The biomass harvest process represents a primary pathway for accumulation of soil-derived ash within baled material. In this work, the influence of five collection techniques on the total ash content and variability of ash content within baled corn stover in southwest Kansas is discussed. The equipment tested included a mower for cutting the corn stover stubble, a basket rake, wheel rake, or shred flail to gather the stover, and a mixed or uniform in-feed baler for final collection. The results showed mean ash content to range from 11.5 to 28.2 % depending on operational choice. Resulting impacts on feedstock costs for a biochemical conversion process range from $5.38 to $22.30 Mg-1 based on the loss of convertible dry matter and ash disposal costs. Collection techniques that minimized soil contact (shred flail or nonmowed stubble) were shown to prevent excessive ash contamination, whereas more aggressive techniques (mowing and use of a wheel rake) caused greater soil disturbance and entrainment within the final baled material. Material sampling and testing were shown to become more difficult as within-bale ash variability increased, creating uncertainty around feedstock quality and the associated costs of ash mitigation.

09 BIOMASS FUELS↗

Reducing Pb and Cl Mobility in Waste-to-Energy Fly Ashes via Chlorellestadite Formation

Sustainably sourced development minerals are vital to meeting the demand for low-carbon construction materials. A potential waste material that can be a low-carbon construction material for cementitious systems is waste-to-energy fly ash (WTE ash), a by-product of waste incineration. WTE ash contains chloride-bearing species and heavy metals, which can promote steel reinforcement corrosion and present long-term leaching risks. Here, we present a new multi-step ash treatment protocol involving dissolution and heating to transform the non-readily removable chlorides in WTE ash to Chlorellestadite (Ca 10 (SiO 4 ) 3 (SO 4 ) 3 Cl 2 ). Our results suggest that this transformation significantly reduces chloride release from WTE ash in an alkaline cement-like environment by over two orders of magnitude, from 1500 mg/l to less than 10 mg/l. This transformation also significantly reduces Pb mobility after treatment (from > 5 mg/l to < 0.5 mg/l), likely caused by the crystallo-chemical incorporation of Pb in Chlorellestadite. In contrast to the existing ash treatment methods, the proposed ash treatment protocol minimizes heavy metals volatilization while simultaneously reducing Pb mobility and chloride release through Chlorellestadite formation. Furthermore, these findings overcome limitations preventing the commercial use of WTE ash and thus opening up pathways towards a circular economy.

36 MATERIALS SCIENCE↗

Diesel Particulate Filter Durability Performance Comparison Using Metals Doped B20 vs. Conventional Diesel Part I: Accelerated Ash Loading and DPF Performance Evaluation

The project objective was to generate experimental data to evaluate the impact of metals doped B20 on DPF ash loading and performance compared to that of conventional petrodiesel. Accelerated ash loading was conducted on two DPFs - one exposed to regular diesel fuel and the other to B20 containing metal dopants equivalent to 4 ppm B100 total metals (currently total metals are limited to 10 ppm in ASTM D6751, the standard for B100). Periodic performance evaluations were conducted on the DPFs at 10 g/L ash loading intervals. After the evaluations at 30 g/L, the DPF was cleaned with a commercial DPF cleaning machine and another round of DPF evaluations were conducted. A comparison of the effect of ash loading with the two fuels and DPF cleaning is presented. The metals doped B20 fuel resulted in ash that was similar to that deposited when exposed to ULSD (lube oil ash) and exhibited similar ash cleaning removal efficiency. Metals doped B20 resulted in faster ash accumulation within the DPF, as expected, but did not appear to have a negative effect on DPF pressure drop or regeneration rates (up to 30 g/L of ash) or exhibit deleterious physical effects on the DPF substrate.

ADVANCED PROPULSION SYSTEMS,BIOMASS FUELS↗

Ash content of bones in the pigtail monkey, Macaca nemestrina.

Ash analyses of skeletons of four adult primates, Macaca nemestrina, revealed some similarities and some marked contrasts when compared with published data on human skeletal ash. The skull in both Macaca nemestrina and man has the highest ash content of all bones in the skeleton. While the bones of the arms of humans have an ash content nearly identical to that of the legs (0.3% difference), in Macaca nemestrina the humeri and radii contain 5.4% more ash than the femora and tibiae. Similarly in Macaca nemestrina the bones of the hands contain 3.5% more ash than the bones of the feet, while in humans the same bones agree within 0.3% implying that adaptive use function is a factor in bone ash concentration. The ribs of Macaca nemestrina showed an unexpectedly high ash content in comparison with those of humans. In contrast with the relatively constant ash content throughout the vertebrae in humans, a conspicuous decrease axially was noted in Macaca nemestrina.

Vose, G. P.↗

Effect of Particle Non-Sphericity on Satellite Monitoring of Drifting Volcanic Ash Clouds

Volcanic eruptions loft gases and ash particles into the atmosphere and produce effects that are both short term (aircraft hazards, interference with satellite measurements) and long term (atmospheric chemistry, climate). Large (greater than 0.5mm) ash particles fall out in minutes [Rose et al, 1995], but fine ash particles can remain in the atmosphere for many days. This fine volcanic ash is a hazard to modem jet aircraft because the operating temperatures of jet engines are above the solidus temperature of volcanic ash, and because ash causes abrasion of windows and airframe, and disruption of avionics. At large distances(10(exp 2)-10(exp 4) km or more) from their source, drifting ash clouds are increasingly difficult to distinguish from meteorological clouds, both visually and on radar [Rose et al., 1995]. Satellites above the atmosphere are unique platforms for viewing volcanic clouds on a global basis and measuring their constituents and total mass. Until recently, only polar AVHRR and geostationary GOES instruments could be used to determine characteristics of drifting volcanic ash clouds using the 10-12 micron window [Prata 1989; Wen and Rose 1994; Rose and Schneider 1996]. The NASA Total Ozone Mapping Spectrometer (TOMS) instruments aboard the Nimbus-7, Meteor3, ADEOS, and Earth Probe satellites have produced a unique data set of global SO2 volcanic emissions since 1978 (Krueger et al., 1995). Besides SO2, a new technique has been developed which uses the measured spectral contrast of the backscattered radiances in the 330-380nm spectral region (where gaseous absorption is negligible) in conjunction with radiative transfer models to retrieve properties of volcanic ash (Krotkov et al., 1997) and other types of absorbing aerosols (Torres et al., 1998).

Krotkov, Nicholay A.↗

The Hazard of Volcanic Ash Ingestion

A research team of U.S. Government agencies and engine manufacturers conducted an experiment to test volcanic-ash ingestion by a NASA owned engine in the same family as the PW 2000 that was donated by the U.S. Air Force. The experiment, called Vehicle Integrated Propulsions Research (VIPR) test, was conducted under the auspices of NASAs Convergent Aeronautics Solutions (CAS) Program and took place in summer of 2015 at Edwards AFB in California as an on-ground, on-wing test. The primary objectives of the volcanic ash test were to determine the effect on the engine of several hours of exposure to low to moderate ash concentrations and to evaluate the capability of engine health management technologies for detecting these effects. The target concentrations of volcanic ash tested were at 1 and 10 mgm3. A natural volcanic ash was used that is representative of distal ash clouds many 100s to 1000 km from a volcanic source. The glassy ash particles were expected to soften and become less viscous when exposed to the high temperatures of the combustion chamber, then stick to the nozzle guide vanes of the high-pressure turbine and this was observed. Numerous observations and measurements of the engines performance and degradation were made during the course of the experiment, including borescope inspections after each test run. The engine has been disassembled so that detailed inspections of the engine effects have been made. A summary of the test methodology and execution will be made along with results from the test. While not intended to be sufficient for rigorous certification of engine performance when ash is ingested, the experiment should provide useful information to aircraft manufacturers, airline operators, and military and civil regulators in their efforts to evaluate the range of risks that ash hazards pose to aviation.

Lekki, John↗

Ash production and dispersal from sustained low-intensity Mono-Inyo eruptions

Recent rhyolitic volcanism has demonstrated that prolonged low-intensity ash venting may accompany effusive dome formation. In this work, we examine the possibility and some consequences of episodes of extended, weak ash venting at the rhyolitic Mono-Inyo chain in Eastern California. We describe ash-filled cracks within one of the youngest domes, Panum Crater, which provide a textural record of ash venting during dome effusion. We use synchrotron-based X-ray computed tomography to characterize the particles in these tuffisites. Particle sizes in well-sorted tuffisite layers agree well with grain size distributions observed during weak ash venting at Soufrière Hills Volcano, Montserrat, and yield approximate upper and lower bounds on gas velocity and mass flux during the formation of those layers. We simulate ash dispersal with Ash3d to assess the consequences of long-lived Mono-Inyo ash venting for ash deposition and the accompanying volcanic hazards. Finally, our results highlight the sensitivity of large-scale outcomes of volcanic eruptions to small-scale processes.

54 ENVIRONMENTAL SCIENCES↗

Structure and Properties of Epoxy/Fly Ash System: Influence of Filler Content and Surface Modification

Epoxy resin composites filled with pristine and organomodified fly ash were prepared and examined. The fly ash used is CaO-rich due to the origin of lignite from the northern Greece area and the power plants in Kozani. As matrix, the epoxy system with curing agent triethylenetetramine was used. A combination of mechanical stirring and ultrasonication was used for highly dispersed fly ash composites. SEM, FTIR spectroscopy and XRD measurements were used to study dispersion homogeneity, structure, degree of aggregation/agglomeration and interface formation of the matrix with the fly ash particles. The properties E′, E″ and relaxations α-(T{sub g}) and β-(Τ{sub β}) of the composites were assessed by DMA. Also, DSC and TGA measurements were used to characterize the thermal properties. Interesting results concerning the effect of the surface organomodification of fly ash on the network formation and the thermomechanical properties of the composites were derived. XRD and FTIR measurements reveal that the functional groups present on the surface of fly ash particles play a dominated role to interface formation. DMA results show that the fly ash surface modification affects the thermodynamic properties of the composites. Additionally, there is evidence showing that the short-scale β-relaxation is also affected by the fly ash surface organomodification.

36 MATERIALS SCIENCE↗

Influence of metal(loid) bioaccumulation and maternal transfer on embryo-larval development in fish exposed to a major coal ash spill

In December 2008, an earthen retaining wall at the Tennessee Valley Authority (TVA) Kingston Fossil Fuel Plant failed and released 4.1 million m 3 of coal ash to rivers flowing into Watts Bar Reservoir in east Tennessee, United States (U.S.). As part of a comprehensive effort to evaluate the risks to aquatic resources from this spill – the largest in U.S. history – we compared bioaccumulation and maternal transfer of selenium (Se), arsenic (As), and mercury (Hg) in adult redear sunfish ( Lepomis macrolophus ), collected two years after the spill from both coal-ash exposed and non-exposed areas of the Emory and Clinch Rivers, with the success of embryo-larval development in their offspring. Whole body and ovary concentrations of Se in female sunfish at three study sites downstream of the spill were significantly elevated (site means = 4.9–5.3 and 6.7–9.0 mg/kg d.w. whole body and ovary concentrations, respectively) compared with concentrations in fish from reference sites upstream of the spill site (2.2–3.2 mg/kg d.w. for whole bodies and 3.6–4.8 mg/kg d.w. for ovaries). However, Se concentrations in coal ash-exposed areas remain below proposed U.S. Environmental Protection Agency (USEPA) criteria for the protection of aquatic life. Site-to-site variation in fish concentrations of As and Hg were not well-correlated with ash-exposure, reflecting the multiple sources of these metal(loid)s in the affected watersheds. In 7-day laboratory tests of embryos and larvae derived from in vitro crosses of eggs and sperm from these field-collected sunfish, fertilization success, hatching success, embryo-larval survival, and incidences of developmental abnormalities did not differ significantly between ash-exposed and non-exposed fish. Furthermore, these developmental endpoints were not correlated with whole body or ovary concentrations of Se, As, or Hg in the maternal fish, or with fish size, ovary weight, or gonadal-somatic indices. Furthermore, results from this and related studies associated with the Kingston coal ash spill are consistent with proposed USEPA fish-based water quality criteria for Se, and to date continue to suggest that long-term exposures to sediment containing residual ash may not present a significant chronic risk to fish populations exposed to this major coal ash release.

01 COAL, LIGNITE, AND PEAT↗

Water dynamics in cement paste at early age prepared with pozzolanic volcanic ash and Ordinary Portland Cement using quasielastic neutron scattering

Early age hydration kinetics of Portland cement with pozzolanic volcanic ash was examined using quasielastic neutron scattering. Volcanic ash consisting of two different particle sizes was used to prepare cement pastes with different ratios of Portland cement to volcanic ash. The concentration of the volcanic ash played a major role in the bound water index and self-diffusion coefficients of hydration water confined in the cement paste. An increase in the particle size of the volcanic ash affected the degree of hydration by allowing more free and mobile water in the gel pores, suggesting that volcanic ash may not have completely reacted during the experimental time frame. This study shows that the particle size along with variation in volcanic ash composition governs the early age hydration process in volcanic ash cements.

36 MATERIALS SCIENCE↗

Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes

Highlights: • Fly ash microsphere is collected from fly ash with electrostatic adsorption classification. • Fly ash microsphere acts as 'ball-bearings' in alkali-activated cements. • Fly ash microsphere works as inorganic dispersing agent to improve workability. • Fly ash microsphere exhibits a good compatibility in alkali-activated cements. - Abstract: The highly viscous property of alkali silicate-activated cements is one of the critical challenges that hinder their wide application. The present study focuses on ameliorating the rheological performance of sodium silicate-activated fly ash/slag pastes by using fly ash microsphere (FAM), which are highly spherical particles collected from fly ash with electrostatic adsorption classification technology. The FAM particles work as 'ball-bearings' in the pastes to reduce the internal friction between fly ash and slag grains, and meanwhile mitigate the agglomeration of flocs and fragmentation to release the locked water. The interrelationship between the FAM particle geometry and plastic viscosity of the paste is well described by the Krieger-Dougherty equation, which supports the proposed mechanisms of 'ball-bearings' effects. FAM can work as an inorganic dispersing agent to improve the workability of alkali-activated cement products for a variety of application aspects.

36 MATERIALS SCIENCE↗

Volcanic ash from Puyehue-Cordón Caulle Volcanic Complex and Calbuco promote a differential response of pro-inflammatory and oxidative stress mediators on human conjunctival epithelial cells

Highlights: • Volcanic ash induces a redox imbalance on conjunctival epithelial cells. • Volcanic ash triggers a pro-inflammatory response mediated by IL-6 and IL-8. • MUC1 expression decreased on conjunctival cells exposed to volcanic ash. Volcanic ash could pose a hazard to the ocular surface as it is constantly exposed to environmental particles. We exposed conjunctival cells to Puyehue-Cordón Caulle volcanic complex (PCCVC) or Calbuco ash particles and evaluated proliferation, viability, apoptosis, MUC1 expression, pro-inflammatory cytokines, and oxidative stress markers. Ash particles from these volcanoes vary in size, composition, and morphology. Our results demonstrate that PCCVC but not Calbuco ash particles induce cytotoxicity on human conjunctival epithelial cells viewed as a decrease in cell proliferation and the transmembrane mucin MUC1 expression; a pro-inflammatory response mediated by IL-6 and IL-8; and an imbalance of the redox environment leading to protein oxidative damage. This is the first in vitro study that assesses the biological effect of volcanic ash particles on human conjunctival epithelial cells and the involvement of inflammatory mediators and oxidative stress as the mechanisms of damage. Our results could provide a better understanding of the ocular symptoms manifested by people living near volcanic areas.

54 ENVIRONMENTAL SCIENCES↗

Application of sequential extraction and hydrothermal treatment for characterization and enrichment of rare earth elements from coal fly ash

Rare earth elements (REE) play a critical role in the global economy. The concern about the REE supply challenge has stimulated global interest in recovering REE from alternative non-conventional REE sources such as coal fly ash. In this paper, sequential extraction, physical separations and hydrothermal alkaline treatment were explored for characterization and enrichment of REE from coal fly ash. Seven-step sequential extraction of coal fly ash has demonstrated that 86.1% of total REE were associated with the glassy phase of the fly ash, with the remaining REE mainly distributed in the organic and sulfides phase (8.3%), the exchangeable phase (3.7%), and the carbonates phase (1.5%). A process combining physical separations, namely, particle size separation and magnetic separation, and hydrothermal alkaline treatment was proposed for enrichment of REE from coal fly ash. The optimal hydrothermal alkaline treatment condition was determined. It was demonstrated that NaOH concentration, solid-to-liquid ratio, temperature, and reaction duration had significant influence on ash dissolution in NaOH solution. Grinding could also enhance ash dissolution during subsequent hydrothermal alkaline treatment. Furthermore REE were enriched from coal fly ash from 325 mg/kg to 877 mg/kg via the proposed process under optimal hydrothermal alkaline treatment conditions.

01 COAL, LIGNITE, AND PEAT↗

Rare earth elements of fly ash from Wyoming's Powder River Basin coal

The advancement and increasing interests in green energy production and environmental protection technologies have spurred the demand for rare earth elements. On the other hand, the U.S. has to rely 100% on import of these materials as the industry was crashed because of the environmental issues associated with mining and processing, and more importantly lack competitiveness. As rare earth elements have many applications in defense and national security sectors, some of the elements were listed as strategic materials or critical materials because of the uncertainties in supply and prices. Therefore, it has become imperative in searching for alternative resources for supplying rare earth elements including unconventional resources. With the strong incentive, coal fly ash is identified as one of the candidates among them. In this study, we present rare earth element data for the 42 ash samples (all derived from Powder River Basin coal) that we collected from seven states (UT, WY, IO, WI, ND, CO, and MI) representing 158 million tons of fly ash. Overall, the results indicate scattered distributions of rare earth elements with concentration ranging from 156 to 590 ppm although all the ash samples originated from the same coal basin (Powder River Basin). The rare earth element resource in these ashes is estimated between 74000 and 106000 t. The ash samples were also characterized by elemental analysis, XRD, SEM-EDS and BET surface area. The characterizations of the ashes were discussed as they might have implications in the subsequent rare earth element extraction processes. In summary, fly ash may represent a potential resource for rare earth element production.

01 COAL, LIGNITE, AND PEAT↗