Search NASA⌕ Search

SEARCH · Search NASA

Results for “ATMOSPHERIC DENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Jacchia-Lineberry upper atmosphere density model

A series of increasingly accurate models which are a careful blend of empirical and theoretical formulae were developed. The exospheric temperature is assumed to be a function of: (1) the average and daily variations in the solar flux, (2) the average and three hourly variations in the geomagnetic index, (3) the angle between the position vector and the axis of the unsymmetric atmospheric bulge, and (4) the angle between the position vector and the geomagnetic pole. The exospheric temperature is related to the density by the solution of the diffusion equilibrium equations for the different constituents of the atmosphere as a function of altitude. Other variations are modeled directly as changes in the density. They are: (1) changes due to the semiannual effect, and (2) changes due to the seasonal latitudinal effect. The causes for these variations are not exactly known but may be modeled sufficiently by empirical formulae. The Jacchia model is assumed to be valid over the altitude range of 90 to 2500 km. The residuals between the observed density from satellite drag observations and the computed densities show the mean relative error to be generally less than 10 percent with occasional peak errors near 50 percent.

Mueller, A. C.↗

Rarefied aerodynamics and upper atmosphere density from multiple orbiter flight measurements

Flight data from six flights of the experimental High Resolution Accelerometer Package (HIRAP), a micro-g accelerometer system, have been analyzed to produce rarefied flow aerodynamic coefficients of the Orbiter and freestream density in the altitude range from 60 km to 160 km. The direct measurements of the lift to drag ratio (L/D) are used to obtain individual normalized body-axis force coefficients in a least-squares regression scheme. An aerodynamics model based on an exponential function of Knudsen number is used for the individual coefficients. The calculated L/D from the flight determined coefficients agree with the multiple flight data measurements to within about 5 percent. Simultaneously, an upper altitude density variation is also obtained from the data. Density altitude profiles exhibit a wave feature on all flights. The wave has an amplitude of about + or - 25 percent relative to the 1962 Standard atmosphere model.

Buck, G. M.↗

Influence of satellite aerodynamics on atmospheric density determination.

Discussion of aerodynamic factors which influence the interpretation of satellite dynamic response. These factors include: (1) the influence of satellite orientation and shape on the drag coefficient; (2) the effect of changes in the gas flow properties with altitude; and (3) the influence of upper atmospheric winds on the interpretation of data. These factors represent the greatest source of error in current data reduction. For this reason, an estimate is made of a possible correction to present density models.

Karr, G. R.↗

X-ray Reflected Spectra from Accretion Disk Models. I. Constant Density Atmospheres

We present new models for illuminated accretion disks, their structure and reprocessed emission. We consider the effects of incident X-rays on the surface of an accretion disk by solving simultaneously the equations of radiative transfer, energy balance and ionization equilibrium over a large range of column densities. We assume plane-parallel geometry and azimuthal symmetry, such that each calculation corresponds to a ring at a given distance from the central object. Our models include recent and complete atomic data for K-shell of the iron and oxygen isonuclear sequences. We examine the effect on the spectrum of fluorescent Ka line emission and absorption in the emitted spectrum. We also explore the dependence of the spectrum on the strength of the incident X-rays and other input parameters, and discuss the importance of Comptonization on the emitted spectrum.

Garcia, Javier↗

Atmospheric density remote sensing of mesosphere and thermosphere to be used for spacecraft design by adopting VHF radar and HF Doppler sounder at low latitude west Pacific site during winter time

Simultaneous observations of VHF radar and HF Doppler array systems located at Chung Li (Taiwan) are used to observe three-dimensional wind speeds and gravity waves. The density perturbations are determined at different altitudes of the mesosphere and thermosphere during weak convective motions of the cold front in the winter. The present observations are believed to be valuable for space projects dealing with the low-latitude atmosphere.

Hung, R. J.↗

Rotor CFD Analysis at Terrestrial and Martian Atmospheric Densities

Much effort has been made to enhance exploration on Mars. In addition to a rover and Mars-orbiting satellites, a Mars helicopter (MH) was proposed in order to augment planetary research. Computational Fluid Dynamics (CFD) simulations have been performed to have a better understanding of the behavior and performance of vertical lift Planetary Aerial Vehicles (PAV). Due to the large differences in atmospheric conditions between Mars and Earth, predicting and testing rotorcraft performance is a complex task. The goal of this project is to understand the capability of the mid-fidelity CFD software RotCFD to predict rotor performance in terms of thrust at 1013.25 milibar and 14 milibar corresponding to Terrestrial and Martian conditions, respectively. Also, in order to characterize the wind tunnel wall effects free field and wind tunnel simulations were performed, analyzed and compared. Different analytical tools have been used in order to aid with the design process for the future vertical lift planetary aerial vehicles. One of them includes experimental tests performed on a rotor in the Aeolian Wind Tunnel (AWT) facility at NASA Ames Research Center under different pressure conditions ranging from Terrestrial to Martian atmospheric conditions. Other software was used as well in order to capture the aerodynamic coefficients of the corresponding rotor sections based on the Mach and Reynolds numbers used for the experimental tests. The aerodynamic coefficients were input into RotCFD, and various simulations were performed under Terrestrial and Martian conditions in order to mimic the experimental test. Then, the obtained results from RotCFD were compared with the AWT collected data.

Atmospheric Pressures↗

Variations of atmospheric density near 400 km with magnetic activity during the storm period of 28 September to 2 October 1969

Neutral density data were obtained near 400 km (1600 LT) from a microphone density gage on OGO-6 from 0 to 40 deg N geomagnetic latitude for 25 September through 3 October 1969. Several geomagnetic storms occurred during this period. Least squares fits were made to data points on density scatter diagrams. An equation representing the least squares fit was computed for each delay time. The equation of best fit (and the corresponding time delay between the density and the magnetic index which resulted in this best fit) was found by choosing the equation that gave the minimum standard error. The implications of the time differences associated with the best fits at various latitudes and longitudes are discussed with regard to the time delays involved in geomagnetic heating of the neutral upper atmosphere.

Anderson, A. D.↗

Atmospheric density variations related to internal gravity waves

Report describes method for estimating gravity-wave density variation from wind speed profile between 60 and 100 km. Single profile is inadequate for valid determination of mean or background values and ensemble averaging over several related profiles is recommended.

Miller, E. B.↗

Atmospheric density variations at 140 kilometers deduced from precise satellite radar tracking data.

Discussion of the technique of evaluating density values from precise radar-tracking data of satellites in the altitude region from 130 to 140 km. Inclinations of these satellites were between 106 and 112 deg. A detailed examination of all elements of the density-reduction techniques was conducted, and consideration was given to recent advances in geodesy, drag-coefficient modeling, and orbit-determination techniques. Ten days of high-resolution density data deduced from orbital decay of each of three satellites are presented. Three types of density variations at 140 km are discernible in these data: periodic daily density variations with a density amplitude of about 10%; density increases of up to 35% associated with enhanced geomagnetic activity during which the planetary geomagnetic index Kp reached a value of 8 units; and an observed semiannual variation of about 20%, which indicates a total semiannual variation of 35 to 40%.

Devries, L. L.↗

A supplemental catalog of atmospheric densities from satellite-drag analysis

The catalog of densities derived from satellite-drag analysis extends and supplements similar earlier publications. The densities were computed from nine artificial satellites for effective heights ranging from 300 to 1130 km, and are presented together with pertinent data that permit the location in time and space of the point to which they refer. The intervals covered vary between 1 and 6 years for the different satellites and average about 3.5 years for the nine satellites. The cutoff date for the data included is, in most cases, January 14, 1970.

Jacchia, L. G.↗

Saltation threshold on Mars - The effect of interparticle force, surface roughness, and low atmospheric density

Results are reported for wind-tunnel experiments performed to determine the threshold friction speed of particles with different densities. Experimentally determined threshold speeds are plotted as a function of particle diameter and in terms of threshold parameter vs particle friction Reynolds number. The curves are compared with those of previous experiments, and an A-B curve is plotted to show differences in threshold speed due to differences in size distributions and particle shapes. Effects of particle diameter are investigated, an expression for threshold speed is derived by considering the equilibrium forces acting on a single particle, and other approximately valid expressions are evaluated. It is shown that the assumption of universality of the A-B curve is in error at very low pressures for small particles and that only predictions which take account of both Reynolds number and effects of interparticle forces yield reasonable agreement with experimental data. Effects of nonerodible surface roughness are examined, and threshold speeds computed with allowance for this factor are compared with experimental values. Threshold friction speeds on Mars are then estimated for a surface pressure of 5 mbar, taking into account all the factors considered.

Iversen, J. D.↗

Atmospheric density, temperature and wind measurement techniques during the 1980 Energy Budget Campaign

Super Loki rocketsonde systems are described. The datasonde telemeters data to a ground station where ambient temperatures are calculated between 20 and 70 km. The sphere is a passive, radar tracked system which allows density to be calculated between 30 and 90 km. When flown simultaneously the systems give redundant data in the altitudes between 30 and 70 km. The datasonde has a balloon parachute that descends more slowly than a conventional parachute and is more stable. Because of launch constraints the datasondes reached very high apogees, leading to very fast descent velocities. Aerodynamic heating reduced thermistor sensitivity. Anomalous parachute behavior influenced wind sensing until a denser layer was reached. The spheres collapsed above 60 km altitude, but their data, combined with dropsonde data give significant results for 21 flights. These show that the stratosphere is colder than Cospar 72 model predictions and the mesosphere is warmer.

Schmidlin, F. J.↗

Sensitivity study of orbital atmospheric density models

Results are presented from a parametric study involving the comparison of the sensitivity to changes in the solar flux and geomagnetic index of the three models currently available at the Marshall Space Flight Center, namely J70, J71, and J77. Twelve different cases of solar/geomagnetic input are used in the study. The inputs of each model are the average daily solar flux parameter, the 162-day centered average solar flux parameter, and the 3-hour average geomagnetic index. Values representing solar conditions close to low, medium, and high are used. All the computations are made over an 81-point latitude/longitude earth matrix coonsisting of nine latitudes from 80 deg N to 80 deg S, along with nine longitudes from 40 deg E to 360 deg, with spacing of 20 deg for latitude and 40 deg for longitude.

Johnson, D. L.↗