Search NASA⌕ Search

SEARCH · Search NASA

Results for “Absorption capacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

All-Solid-State Lithium–Sulfur Batteries Enhanced by Redox Mediators

We report redox mediators (RMs) play a vital role in some liquid electrolyte-based electrochemical energy storage systems. However, the concept of redox mediator in solid-state batteries remains unexplored. Here, we selected a group of RM candidates and investigated their behaviors and roles in all-solid-state lithium-sulfur batteries (ASSLSBs). The soluble-type quinone-based RM (AQT) shows the most favorable redox potential and the best redox reversibility that functions well for lithium sulfide (Li 2 S) oxidation in solid polymer electrolytes. Accordingly, Li 2 S cathodes with AQT RMs present a significantly reduced energy barrier (average oxidation potential of 2.4 V) during initial charging at 0.1 C at 60 °C and the following discharge capacity of 1133 mAh g s -1 . Using operando sulfur K-edge X-ray absorption spectroscopy, we directly tracked the sulfur speciation in ASSLSBs and proved that the solid-polysulfide-solid reaction of Li 2 S cathodes with RMs facilitated Li 2 S oxidation. In contrast, for bare Li 2 S cathodes, the solid-solid Li 2 S-sulfur direct conversion in the first charge cycle results in a high energy barrier for activation (charge to ~4 V) and low sulfur utilization. The Li 2 S@AQT cell demonstrates superior cycling stability (average Coulombic efficiency 98.9% for 150 cycles) and rate capability owing to the effective AQT-enhanced Li-S reaction kinetics. This work reveals the evolution of sulfur species in ASSLSBs and realizes the fast Li-S reaction kinetics by designing an effective sulfur speciation pathway

25 ENERGY STORAGE↗
DOE OSTI2020

Magnesium Todorokite: Influence of Morphology on Electrochemistry in Lithium, Sodium and Magnesium Based Batteries

Samples of Mg-todorokite with mixed nanosheet & nanowire (referred to as nanosheets for the sake of simplicity) and pure nanowire morphology were prepared to probe the morphological impact on battery relevant electrochemistry. The samples had similar physicochemical properties where the Mg-todorokite nanosheets had a composition of Mg 0.20 MnO 2 with a crystallite size of 9 nm and water content of 0.29 moles of H 2 O per formula unit, while the nanowires had a composition of Mg 0.19 MnO 2 with a crystallite size of 14 nm and water content of 0.28. The electrochemistry of the Mg-todorokite materials was evaluated using cyclic voltammetry, galvanostatic cycling, and rate capability testing. The Mg-todorokite nanosheets showed higher discharge capacity than the nanowires in lithium, sodium and magnesium-based electrolytes. Notably, the nanowire materials exhibited excellent cycling stability compared to the nanosheets in lithium and sodium-based batteries. Finally, x-ray absorption spectroscopy (XAS) of lithiated samples suggests that Mn in the nanosheet containing material was more highly reduced to Mn 3+ after the 1st full discharge explaining the higher initial capacities observed. However, a MnO-like structural distortion was observed after extended cycling in the nanosheet material consistent with its poorer capacity retention.

25 ENERGY STORAGE↗
DOE OSTI2023

Elucidating Primary Degradation Mechanisms in High-Cycling-Capacity, Compositionally Tunable High-Entropy Hydrides

The hydrogen sorption properties of single-phase bcc (TiVNb) 100–x Cr x alloys (x = 0–35) are reported. All alloys absorb hydrogen quickly at 25 °C, forming fcc hydrides with storage capacity depending on the Cr content. Here, a thermodynamic destabilization of the fcc hydride is observed with increasing Cr concentration, which agrees well with previous compositional machine learning models for metal hydride thermodynamics. The steric effect or repulsive interactions between Cr–H might be responsible for this behavior. The cycling performances of the TiVNbCr alloy show an initial decrease in capacity, which cannot be explained by a structural change. Pair distribution function analysis of the total X-ray scattering on the first and last cycled hydrides demonstrated an average random fcc structure without lattice distortion at short-range order. If the as-cast alloy contains a very low density of defects, the first hydrogen absorption introduces dislocations and vacancies that cumulate into small vacancy clusters, as revealed by positron annihilation spectroscopy. Finally, the main reason for the capacity drop seems to be due to dislocations formed during cycling, while the presence of vacancy clusters might be related to the lattice relaxation. Having identified the major contribution to the capacity loss, compositional modifications to the TiVNbCr system can now be explored that minimize defect formation and maximize material cycling performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Semiconducting Zn x Mo 3 S 13 -GO Chalcocarbogel: A High-Capacity and Stable Sulfur-Equivalent Conversion-Based Electrode for Lithium-Ion Batteries

Lithium–sulfur batteries with a sulfur electrode offer a theoretical capacity of ∼1672 mAh g –1 , but rapid capacity loss mainly constrains their practical application. This work introduces a semiconducting and amorphous Zn x Mo 3 S 13 -GO (x = 0.5) chalcocarbogel sulfur-equivalent electrode with superior capacity and stability for lithium-ion batteries (LIBs). The Zn x Mo 3 S 13 -GO is synthesized in solution under ambient conditions, and its local structure contains S–S, M-Q (M = Mo, Zn; Q = S, O), C–S, and Mo–Mo bonding motifs with Mo coordination environment closely related to Mo 3 S 13 anions, as determined by X-ray photoelectron spectroscopy, synchrotron X-ray scattering, X-ray absorption spectroscopy, and ab initio molecular dynamics simulations. The Li/Zn x Mo 3 S 13 -GO cell offers an initial discharge capacity of 1019 mAh g –1 at a rate of C/3. After the activation cycles, the Li/Zn x Mo 3 S 13 -GO cell demonstrates good cycling stability, retaining a discharge capacity of 519.4 mAh g –1 after 250 cycles with ∼99.98% Coulombic efficiency and excellent rate capabilities. Moreover, it provides an initial discharge capacity of ∼574 mAh g –1 and maintains a retention capacity of 279 mAh g –1 at 1C after 625 cycles. The Lewis acidic Zn 2+ ion enhances the Lewis basic polysulfide anchoring ability and reduces the dissolution of polysulfides produced during the redox process through Zn–S covalent interaction, while the semiconducting and amorphous structure of the chalcocarbogel increases the electrical and ionic conductivity. Furthermore, this work highlights chalcocarbogels’ potential for developing high-capacity and stable electrodes for LIBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Evidence of Zintl Intermediate Phase and Its Impacts on Li and Na Storage Performance of Pb-Based Alloying Anodes

Anode materials based on conversion and alloying reactions are promising to achieve high energy density of advanced sodium-ion batteries (SIBs). While the chemical similarities between sodium and lithium as alkali elements make the benchmarking strategy practical in developing new high-performance anodes, simply borrowing the anode material from one system to the other does not always guarantee success unless it is based on sound understanding of both Li- and Na-reaction mechanisms. In this work, we report the Na storage performance of a Pb-based anode and its fundamental reaction dynamics. In contrast to its excellent electrochemical performances in Li cells (reversible ~600 mAh/g), the newly developed Pb@PbO–C nanocomposite anode has limited electrochemical Na reaction properties showing moderate capacity and rate performances (~300 mAh/g at 20 mA/g). Synchrotron-based X-ray diffraction and absorption spectroscopy studies reveal the fundamental differences in the Na and Li reaction mechanism of the Pb-based anode. Further, unlike Li reaction, the unique Na reaction mechanism involves the formation of a highly ionic NaPb Zintl phase, which comprises tetrahedral Pb 4 clusters, as an intermediate phase. The strong covalent character of the Pb 4 Zintl clusters adversely affects the electronic conductivity and thus limits the electrochemical performance of the Pb-based anode in Na cells. These findings provide new insights applicable to developing high-performance alloying anode materials.

25 ENERGY STORAGE↗
DOE OSTI2021

Modeling, Design, and Testing of a Novel Biphasic Solvent-Enabled Absorption System for Post-Combustion Carbon Capture

A novel absorption process enabled by a new class of biphasic solvents for post-combustion carbon capture (BiCAP) is presently being developed at the University of Illinois at Urbana-Champaign. The new biphasic solvents are water-lean solvent blends that develop dual liquid phases with the absorbed CO2 highly enriched in one of the phases. These solvents are superior in CO2 capacity and have high thermal and oxidative stability compared to MEA. The BiCAP technology features a unique process configuration of multi-stage CO2 absorption and liquid–liquid phase separation during CO2 absorption, allowing continual separation and removal of the CO2-enriched liquid phase for maintaining low solvent viscosity and a fast absorption rate. A 40 kWe-scale skid has recently been constructed at the Abbott Power Plant in Champaign, IL, to test the BiCAP solvent in continuous operation with a slipstream of real post-combustion flue gas. Along with improvements in the stripping configuration including cold feed bypass, the process is expected to achieve a minimum reboiler duty of 2,210 kJ/kg CO2 captured at a stripper operating pressure of 6 bar.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Performance and lifetime of intercalative water deionization cells for mono- and divalent ion removal

We report intercalative deionization (IDI) uses two cation intercalation electrodes separated by an anion exchange membrane in a symmetric cell design that has the potential to deliver electrochemically desalinated water in an energy- and water-efficient way. Here, we define and measure metrics to describe the performance and lifetime of IDI cells and compare them for NaCl and CaCl 2 feed solutions. With 20 mM NaCl, NiHCF/AEM/NiHCF flow cells achieve 10 mM average concentration change at a productivity of 20 l/h/m 2 and 5 mM average concentration change at 130 l/h/m 2 . In both cases the cells are operated at a 3C current rate and consume ~30 Wh/m 3 of energy. With 10 mM CaCl 2 , the specific capacity and salt removal of IDI flow cells is ~4 times lower. NiHCF/NiHCF beaker cells with CaCl 2 electrolyte suffer from strong capacity fade, while the same cells with NaCl electrolyte achieve 500 cycles without any capacity fade. Our post-mortem analysis using X-ray diffraction, secondary electron microscopy, energy dispersive X-ray spectroscopy, synchrotron-based X-ray absorption spectroscopy and micro X-ray fluorescence mapping reveals that NiHCF dissolves upon repeated intercalation with Ca 2+ , releasing residual K + , Ni 2+ and Fe(CN) 6 3 , which precipitates as a crystalline decomposition product on the electrodes. This side reaction deprives the active material NiHCF of charge compensating Fe, and thus accounts for the observed capacity fade.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enabling High-Performance NASICON-Based Solid-State Lithium Metal Batteries Towards Practical Conditions

Solid-state lithium metal batteries (SSLMBs) are promising next-generation high-energy rechargeable batteries. However, the practical energy densities of the reported SSLMBs have been significantly overstated due to the use of thick solid-state electrolytes, thick lithium (Li) anodes, and thin cathodes. Here, a high-performance NASICON-based SSLMB using a thin (60 µm) Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP) electrolyte, ultrathin (36 µm) Li metal, and high-loading (8 mg cm -2 ) LiFePO 4 (LFP) cathode is reported. The thin and dense LAGP electrolyte prepared by hot-pressing exhibits a high Li ionic conductivity of 1 × 10 -3 S cm -1 at 80 °C. The assembled SSLMB can thus deliver an increased areal capacity of ≈1 mAh cm -2 at C/5 with a high capacity retention of ≈96% after 50 cycles under 80 °C. Furthermore, it is revealed by synchrotron X-ray absorption spectroscopy and in situ high-energy X-ray diffraction that the side reactions between LAGP electrolyte and LFP cathode are significantly suppressed, while rational surface protection is required for Ni-rich layered cathodes. This study provides valuable insights and guidelines for the development of high-energy SSLMBs towards practical conditions.

25 ENERGY STORAGE↗
DOE OSTI2021

Roles of Mn and Co in Ni-rich layered oxide cathodes synthesized utilizing a Taylor Vortex Reactor

It is reported that layered oxides, composed of nickel, manganese, and cobalt (NMC), are sought after as cathode materials which provide improved energy density, cycle life, and safety in commercial lithium ion batteries (LIBs). Increasing Ni contents higher than 80% can provide even higher practical discharge capacities >200 mAh/g and similar to ~4 V discharge potential vs Li/Li + , making them promising cathodes for next generation LIBs. However, rapid capacity fade during cycling and heat-related safety concerns are delaying their successful transition to industry. We report systematic performance optimization of LiNiO 2 , LiNi 0.9 Mn 0.1 O 2 , and LiNi 0.9 Co 0.1 O 2 high Ni layered oxide cathodes synthesized by utilizing a Taylor Vortex Reactor. Co-free LiNi 0.9 Mn 0.1 O 2 cathode showed 200 mAh/g highest discharge capacity at 0.1 C rate with 84% retention after 103 cycles at 0.3C rate while LiNi 0.9 Co 0.1 O 2 cathode showed higher initial but poor cycle life (225 mAh/g highest discharge capacity at 0.1C rate with only 56% capacity retention after 103 cycles at 0.3 C rate. Synchrotron based X-ray diffraction (SXRD), X-ray absorption spectroscopy (XAS) and focused ion beam (FIB) imaging of pristine and cycled cathodes after 103 cycles provided important information on degradation mechanism. The roles of Mn and Co on layered structure formation, charge balance, cationic mixing, and electrochemical performance were elucidated using the crystallographic information from XRD refinement and electronic state analysis from XAS providing valuable information to design future Ni-rich layered oxide cathodes.

25 ENERGY STORAGE↗
DOE OSTI2024

Low-cost iron trichloride cathode for all-solid-state lithium-ion batteries

The dominant chemistries of lithium-ion batteries on the market today still rely on flammable organic liquid electrolytes and cathodes containing scarce metals, such as cobalt or nickel, raising safety, cost and environmental concerns. Here we show a FeCl 3 cathode that costs as little as 1% of the cost of a LiCoO 2 cathode or 2% of a LiFePO 4 cathode. Once coupled with a solid halide electrolyte and a lithium-indium (Li–In) alloy anode, it enables all-solid-state lithium-ion batteries without any liquid components. Notably, FeCl 3 exhibits two flat voltage plateaux between 3.5 and 3.8 V versus Li + /Li, and the solid cell retains 83% of its initial capacity after 1,000 cycles with an average Coulombic efficiency of 99.95%. Combined neutron diffraction and X-ray absorption spectroscopy characterizations reveal a Li-ion (de)intercalation mechanism together with a Fe 2+ /Fe 3+ redox process. Further, our work provides a promising avenue for developing sustainable battery technologies with a favourable balance of performance, cost and safety.

25 ENERGY STORAGE↗
DOE OSTI2021

Anionic redox reaction triggered by trivalent Al 3+ in P3-Na 0.65 Mn 0.5 Al 0.5 O 2

P3-Na 0.65 Mn 0.5 Al 0.5 O 2 (NMAO) has been synthesized and studied as a cathode for sodium batteries, and shows anionic redox reaction (ARR) and exhibits a first charging capacity of ~110 mA h g -1 . The electrochemical mechanism of NMAO was comprehensively investigated by X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and density functional theory (DFT) calculations. The reversible oxygen redox behaviour is triggered by Al 3+ through oxygen quasi non-bonding states generated by the relatively ionic interaction of Al and O. Furthermore, the presence of Al 3+ can suppress oxygen loss in ARR. Overall, this work provides new insights into the design and mechanism of anionic redox active cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Association between soil organic carbon and calcium in acidic grassland soils from Point Reyes National Seashore, CA

All data is collected from across 3 soil cores spanning a pH gradient at Point Reyes National Seashore, as part of a recent publication. The bulk data csv includes hygroscopic moisture content, soil pH, total C and N values, particle size distributions, cation exchange capacity and extractable cations. The STXM data package includes raw spectra data from scanning transmission X-ray microscopy C near-edge X-ray absorption fine structure spectroscopy analysis, extracted from STXM Image Reader analysis and then subsequently normalised in Athena (see details in paper). The data file also contains a bulk chemistry and mineralogy dataset, including total and trace element contents from 3 depths and mineral compositions as measured at BL 11-3 SSRL and semi-quantified in HighScore. Finally the final data file is calcium K-edge X-ray absorption near-edge structure spectroscopy (BL 4-3) and micro-XANES and micro-X-ray fluorescence (BL 14-3b) data.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Coupled Experimental–Theoretical Characterization of a Carbon Electrode in Vanadium Redox Flow Batteries using X-ray Absorption Spectroscopy

Vanadium redox flow batteries (VRFBs) have emerged as promising solutions for stationary grid energy storage due to their high efficiency, scalability, safety, near room-temperature operation conditions, and the ability to independently size power and energy capacities. The performance of VRFBs heavily relies on the redox couple reactions of V 2+ /V 3+ and VO 2+ /VO 2 + on carbon electrodes. Therefore, a thorough understanding of the surface functionality of carbon electrodes and their propensity for degradation during electrochemical cycles is crucial for designing VRFBs with extended lifespans. In this study, we present a coupled experimental–theoretical approach based on carbon K edge X-ray absorption spectroscopy (XAS) to characterize carbon electrodes prepared under different conditions and identify relevant functional groups that contribute to unique spectroscopic features. Atomic models were created to represent functional groups, such as hydroxyl, carboxyl, methyl, and aldehyde, bonded to carbon atoms in either sp 2 or sp 3 environments. The interactions between functionalized carbon and various solvated vanadium complexes were modeled using density functional theory. A library of carbon K-edge XAS spectra was generated for distinct carbon atoms in different functional groups, both before and after interacting with solvated vanadium complexes. Here we demonstrate how these simulated spectra can be used to deconvolve ex situ experimental spectra measured from carbon electrodes and to track changes in the electrode composition following immersion in different electrolytes or extended cycling within a functional VRFB. By doing so, we identify the active species present on the carbon electrodes, which play a crucial role in determining their electrochemical performance.

25 ENERGY STORAGE↗
DOE OSTI2023

Toward Stable Cycling of a Cost-Effective Cation-Disordered Rocksalt Cathode via Fluorination

The recently developed Li-excess cation-disordered rock salts (DRXs) exhibit an excellent chemical diversity for the development of alternative Co/Ni-free high-energy cathodes. Herein, the synthesis of a highly fluorinated DRX cathode, Li 1.2 Mn 0.6 Ti 0.2 O 1.8 F 0.2 , based on cost-effective and earth-abundant transition metals, via a solid-state reaction, is reported. The fluorinated DRX cathode using ammonium fluoride precursor exhibits more uniform particle size and delivers a specific discharge capacity of 233 mAh g -1 and specific energy of 754 Wh kg -1 , with 206 mAh g -1 retained after 200 cycles. Further, the combined synchrotron X-ray absorption spectroscopy and resonant inelastic X-ray scattering spectroscopy analysis reveals that the remarkable cycling performance is attributed to the high fluorination and thus enhanced Mn content, enabling the utilization of more Mn redox than the oxide analog. This study demonstrates a great promise to develop next-generation cost-effective DRX cathodes with enhanced capacity retention for high-energy Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Unveiling a high capacity multi-redox (Nb 5+ /Nb 4+ /Nb 3+ ) NASICON-Nb 2 (PO 4 ) 3 anode for Li- and Na-ion batteries

Sodium superionic conductor (NASICON)-type materials are widely explored as Li- and Na-ion cathodes and solid-state electrolytes but are largely ignored as anodes due to their lower capacities and higher intercalation voltages, which reduce the overall energy densities of Li- and Na-ion batteries (LIBs and SIBs). Herein, we unveil high capacity multi-redox empty NASICON-Nb 2 (PO 4 ) 3 as a potential anode material for LIBs and SIBs, which reversibly delivers 167 and 150 mA h g -1 at the average voltages of 1.86 V vs. Li + /Li 0 and 1.46 V vs. Na + /Na 0 , respectively. The Li and Na intercalation reactions proceed via multiple phase transitions, leading to short-range ordered Li 3 Nb 2 (PO 4 ) 3 and triclinic (P$\overline{1}$ with combining macron]) Na 3 Nb 2 (PO 4 ) 3 , as revealed by in situ X-ray diffraction studies. Our density functional theory calculations are also in agreement with the in situ measurements in predicting a stable Na 3 Nb 2 (PO 4 ) 3 composition in the Na–Nb 2 (PO 4 ) 3 pseudo-binary system. X-ray absorption spectroscopy confirms the participation of multi-redox Nb 5+ /Nb 4+ /Nb 3+ couples. The Nb 2 (PO 4 ) 3 anode delivers capacities greater than 124 and 106 mA h g -1 at 1C rate in Li and Na cells, respectively. In conclusion, pairing Nb 2 (PO 4 ) 3 with suitable cathodes and electrolytes can lead to high energy density batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Geothermal Deep Direct Use for Turbine Inlet Cooling in East Texas

The National Renewable Energy Laboratory (NREL), the Southern Methodist University Geothermal Laboratory (SMU), Eastman Chemical (Longview, TX), and TAS (Houston, TX) evaluated the feasibility of using geothermal heat to improve the performance of a natural-gas power plant in East Texas. The area of interest is the Eastman Chemical plant in Longview, Texas, which is on the northwestern margin of a geologic region known as the Sabine Uplift. The feasibility study focused on determining the potential for accessing a subsurface hot-water geothermal resource within a 10-km radius of the site to provide thermal energy for absorption chillers. Wells within a 20-km radius are included for broader geological comparison to determine the heat flow, temperature-at-depth, field porosity and permeability. The lithologies of most interest are the Lower Cretaceous Trinity Group and Upper Jurassic Cotton Valley Group. The deeper Cotton Valley formations are hotter (averaging 117 to 130°C), yet permeability and porosity are low. The shallower Trinity Group contains more variability in permeability and porosity and lower temperatures averaging about 98 to 117°C. The shallower formations are considered despite the lower temperature because of increased ability to produce larger volumes of water and extract enough heat before reinjection. The complete SMU analysis is available in the National Geothermal Data System (NGDS). Tapping such deep geothermal sources for direct heating (as opposed to power generation) is known as geothermal deep direct use (DDU). Geothermal DDU has potential across a wide swath of the United States but is underutilized due to challenging project economics associated with developing a deep geothermal resource for what are typically small-scale, variable-demand projects. This project examines the feasibility of geothermal energy integration in a natural-gas combined cycle power station in East Texas. The DDU resource is tapped to drive absorption chillers (24/7) for production of chilled water at 5-10°C (41-50°F). This chilled water is stored until needed, which allows for continuous operation with a relatively small-capacity geothermal/absorption chiller system. When conditions are favorable, the chilled water is dispatched to cool the air entering the compressor stage of a gas combustion turbine. This process, known as turbine inlet cooling (TIC), boosts power production during periods of high temperature and high-power demand. Such systems can enhance grid reliability and reduce the cost for peak-demand power. A simulation model of the power plant was developed in IPSEpro software and validated against operational data from the plant. This model allowed the team to estimate the additional power that could be produced by applying TIC under different operating and ambient conditions. Absorption chiller performance was estimated from vendor sources to determine the production rate of chilled water from the geothermal resource. Geothermal drilling and development costs were estimated using NREL's GEOPHIRES 2.0. The expected lower drilling costs in this region led to an estimated cost of geothermal heat of about $4/MMBtu (1.4 cents/kWh t ). The estimated cost for the absorption chillers and TIC hardware were obtained from literature sources and project partners. Hourly data were obtained for weather, natural gas and electricity prices, and plant operating state for 2017, which served as a representative year. NREL estimated the capital cost, operating cost, and additional electricity production and revenue for different combinations of geothermal capacity, chiller capacity, and water storage-tank size. The analysis drove toward smaller geothermal and chiller systems to reduce equipment cost. A relatively low-cost water storage tank accumulated the near-continuous chilled water output for later use when TIC was most valued.

15 GEOTHERMAL ENERGY↗
DOE OSTI2020

Reversible Crosslinked Polymer Binder for Recyclable Lithium Sulfur Batteries with High Performance

Owing to the negative impact of the extensive utilization of batteries on the environment, sustainability of the cells needs to be included in the systemic research of batteries. In this work, a dissolvable ionic crosslinked polymer (DICP) is exploited as a binder for lithium–sulfur batteries by crosslinking the polyacrylic acid and polyethyleneimine through carboxy-amino ionic interaction. This interaction is pH-controlled, and therefore, the crosslinked binder network can be readily dissociated under basic conditions, providing a facile strategy enabling valuable components recycled through a convenient washing method. The sulfur cathode prepared using the recycled carbon–sulfur composite can deliver comparable capacity as that of fresh electrode. In addition, evidence from cell performance and characterizations, such as in situ X-ray absorption spectroscopy, in situ UV–visible spectroscopy, X-ray photoelectron spectroscopy, and density functional theory calculation, confirms that DICP is a more effective binder than its commercial counterpart on suppressing polysulfide dissolution in the electrolyte. Exploiting reversible crosslinked polymer binder for recyclable Li–S batteries with ameliorated electrochemical performance, this study illuminates sustainable development for large-scale energy storage systems.

36 MATERIALS SCIENCE↗