Search NASA⌕ Search

SEARCH · Search NASA

Results for “Advanced Codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

MOCUM Verification with a Heterogeneous MOX Whole Core C5G7 Benchmark Problem

Recent advancements in computer technology has allowed for the possibility to solve complex reactor problems without homogenization, but the present benchmark problems are all limited to small scale with few fuel assemblies and homogeneity at the core level. Therefore, to verify the capabilities of the advanced neutronics codes, heterogeneous full core model shall be developed. Recently several whole-core benchmark problems such as BEAVRS and VERA are developed with measured data to which computational codes can be compared. With a particular research interest on the MOX fuel, this study develops a two-dimensional (2-D) whole core MOX neutronics benchmark based on the C5G7 benchmark concept. The developed MOX core benchmark will then be used to verify the accuracy of the MOCUM code, which is developed using the method of characteristic (MOC) as the flux solver with an advanced geometry processor designed for arbitrary core geometries. MOCUM results will be compared against MCNP5 results as the reference solutions. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Verification test suite for systems analysis tools

This report documents strategies and test problems to support Verification and Validation (V&V) of the systems analysis tools currently being developed under the Reactor Product Line (RPL) of DOE’s Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. A suite of verification test cases has been developed. This test suite supports development of new codes as well as maintenance of existing codes. For advanced tools that are under development like RELAP-7 for light water reactor analysis [1] and the MOOSE based component models for SFR (M-SFR) analyses [2], verification of simulation results must be performed throughout the entire development phase. This test suite is also useful for established codes as part of automated testing to ensure that general code maintenance does not change existing results.

Sumner, T.↗

AN EXTENSION OF THE ATHENA++ CODE FRAMEWORK FOR GRMHD BASED ON ADVANCED RIEMANN SOLVERS AND STAGGERED-MESH CONSTRAINED TRANSPORT

We present a new general relativistic magnetohydrodynamics (GRMHD) code integrated into the Athena++ framework. Improving upon the techniques used in most GRMHD codes, ours allows the use of advanced, less diffusive Riemann solvers, in particular HLLC and HLLD. We also employ a staggered-mesh constrained transport algorithm suited for curvilinear coordinate systems in order to maintain the divergence-free constraint of the magnetic field. Our code is designed to work with arbitrary stationary spacetimes in one, two, or three dimensions, and we demonstrate its reliability through a number of tests. We also report on its promising performance and scalability.

79 ASTRONOMY AND ASTROPHYSICS↗

Centipod WEC, Advanced Controls, MPC Controller MATLAB Code

This archive contains the MATLAB code for the model predictive control (MPC) controller developed in this project. The archive containing the WaveDyn models used for analysis of the Centipod with the MPC controller is linked in this submission.

16 TIDAL AND WAVE POWER↗

Dealing with megawatt beams

The next generation of accelerators for MegaWatt proton, electron and heavy-ion beams puts unprecedented requirements on the accuracy of particle production predictions, the capability and reliability of the codes used in planning new accelerator facilities and experiments, the design of machine, target and collimation systems, detectors and radiation shielding and minimization of their impact on environment. Recent advances in code developments are described for the critical modules related to these challenges. Examples are given for the most demanding areas: targets, collimators, beam absorbers, radiation shielding, induced radioactivity and radiation damage.

43 PARTICLE ACCELERATORS↗

Study of recirculating liquid fuel in a 1D critical stationary system

Several studies have been conducted to investigate the physics of liquid fuel reactors, showing also applications with molten salts. A liquid nuclear fuel implies changes in the neutron balance equation to take into account the precursors' displacement and the emission of delayed neutrons in a different position than at the original fission. This requires to upgrade the computer codes normally used to calculate nuclear reactors using only solid fuel. In this work, we revisit a simple problem with liquid fuel, which is proposed for the verification of the numerical solutions obtained by advanced computer codes. This problem studies criticality with constant coefficients, thus neglecting thermal feedback. We elaborate on the analytical solution of the problem, deriving also a generalized eigenvalue problem by finite-volume integration over the cells of a discretized mesh to study the evolution of the dominance ratio with fuel velocity. Finally, we investigate the influence of the fuel velocity on the reactivity of the system. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Reactor physics benchmark of Westinghouse PWR core design suite for high burnup/high enrichment fuel - Part 1: Pin and lattice

Westinghouse has performed a comprehensive set of code-to-code benchmark comparisons to corroborate application of its state-of-the-art NEXUS-based code suite to high burnup and high enrichment (HB/HE) fueled PWR core design and reload analysis. This paper focuses on analysis of the predictions for pin and lattice designs representative of HB/HE core reloads from the Westinghouse advanced lattice code PARAGON2, the Monte-Carlo code SERPENT2 and MPACT, the deterministic neutronic component of VERA. A companion paper presented at this conference analyzes results obtained with the Westinghouse ANC9 core simulator, using lattice data provided by PARAGON2 with the NEXUS cross-section methodology, and MPACT for 2D and 3D core configurations incorporating HB/HE fuel reloads to achieve cycle length extension to 24-month in high-power density PWRs. The results of the pin and lattice benchmark presented in this paper show that the neutronic predictions from PARAGON2 for HB/HE fueled PWRs are in remarkable agreement with predictions from both SERPENT2 and MPACT including for depletion to high fuel burnup values, and employing a set of challenging lattices which feature combined use of burnable absorbers to obtain the required reactivity hold-down to support PWR transition to HB/HE fuel and 24-month operational cycles. As corroborated by this analysis and the analysis contained in the companion paper, the Westinghouse NEXUS-based PWR core analysis package can be confidently applied by industry for design analysis of PWR core reloads adopting HB/HE fuel and properly support the industry commercialization plans for in-reactor deployment. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Statistical uncertainty analysis applied to the DRAGONv4 code lattice calculations and based on JENDL-4 covariance data

In this paper, multi-group microscopic cross-section uncertainty is propagated through the DRAGON (Version 4) lattice code, in order to perform uncertainty analysis on k{infinity} and 2-group homogenized macroscopic cross-sections predictions. A statistical methodology is employed for such purposes, where cross-sections of certain isotopes of various elements belonging to the 172 groups DRAGLIB library format, are considered as normal random variables. This library is based on JENDL-4 data, because JENDL-4 contains the largest amount of isotopic covariance matrixes among the different major nuclear data libraries. The aim is to propagate multi-group nuclide uncertainty by running the DRAGONv4 code 500 times, and to assess the output uncertainty of a test case corresponding to a 17 x 17 PWR fuel assembly segment without poison. The chosen sampling strategy for the current study is Latin Hypercube Sampling (LHS). The quasi-random LHS allows a much better coverage of the input uncertainties than simple random sampling (SRS) because it densely stratifies across the range of each input probability distribution. Output uncertainty assessment is based on the tolerance limits concept, where the sample formed by the code calculations infers to cover 95% of the output population with at least a 95% of confidence. This analysis is the first attempt to propagate parameter uncertainties of modern multi-group libraries, which are used to feed advanced lattice codes that perform state of the art resonant self-shielding calculations such as DRAGONv4. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Jupyter Notebook Code for “Data-Driven Insights to Accelerate Advanced Biomanufacturing”

This page contains the datasets and code #O5097 Jupyter Notebook Code for “Data-Driven Insights to Accelerate Advanced Biomanufacturing”. Data literature-derived cultivation experiments for polyhydroxybutyrate (PHB) production in Synechocystis sp. PCC 6803 and were used for ML model development, interpretation, and experimental validation.

Lalonde, Jessica N. [Los Alamos National Laborator↗

Recent advances in the Mercury Monte Carlo particle transport code

We review recent physics and computational science advances in the Mercury Monte Carlo particle transport code under development at Lawrence Livermore National Laboratory. We describe recent efforts to enable a nuclear resonance fluorescence capability in the Mercury photon transport. We also describe recent work to implement a probability of extinction capability into Mercury. We review the results of current parallel scaling and threading efforts that enable the code to run on millions of MPI processes. (authors)

97 MATHEMATICS AND COMPUTING↗

ALLOY SELECTION AND C-276 CODE DESIGN VALUE EXTENSION FOR ADVANCED MOLTEN SALT TECHNOLOGY TEST FACILITIES EXPERIMENTATION

Molten halide salts are being considered as working fluids for nuclear and concentrated solar power applications. High temperature molten fluoride and chloride salts are known to preferentially attack and deplete Cr in alloys, which leads to the use of high-Ni lower-Cr alloys in test facilities for advanced Molten Salt Technology. Alloys 600 and C-276 are two commercially available Ni alloys that have moderate Cr contents and are qualified to the maximum temperature of 649°C and 677°C (1,200°F and 1,251°F), respectively, in the Boiler and Pressure Vessel Code. Both alloys have good corrosion resistance to acids, are resistant to stress-corrosion cracking, and have long track records of use in the chemical industry. Comparatively, Alloy C-276 has a similar Cr content but much higher allowable stresses for temperatures greater than 600°C (1,112°F). Therefore, it has been considered as a structural material for test facilities that require operations at 700°C (1,292°F) or greater to develop high-temperature Molten Salt Technology. To meet the requirements, the current code design values were extended based on some experimental data. Analysis showed that above current Codified maximum temperature, strength of the alloy is mainly controlled by creep rupture life under the average stress, although the Sc creep rate criterion is close to the Favg.Savg rupture criterion. This paper presents the intended test facilities and the design requirements, alloy selection considerations, literature review, data analysis, and proposed allowable stress extension based on some creep test data for C-276 at temperatures greater than 677°C (1,251°F). Further research activities are also briefly mentioned.

Ren, Weiju↗

Influence of impact conditions on plasma generation during hypervelocity impact by aluminum projectile

For describing hypervelocity impact (relative low-speed as related to space debris and much lower than travelling speed of meteoroids) phenomenon associated with plasma generation, a self-developed 3D code was advanced to numerically simulate projectiles impacting on a rigid wall. The numerical results were combined with a new ionization model which was developed in an early study to calculate the ionized materials during the impact. The calculated results of ionization were compared with the empirical formulas concluded by experiments in references and a good agreement was obtained. Then based on the reliable 3D numerical code, a series of impacts with different projectile configurations were simulated to investigate the influence of impact conditions on hypervelocity impact generated plasma. It was found that the form of empirical formula needed to be modified. A new empirical formula with a critical impact velocity was advanced to describe the velocity dependence of plasma generation and the parameters of the modified formula were ensured by the comparison between the numerical predictions and the empirical formulas. For different projectile configurations, the changes of plasma charges with time are different but the integrals of charges on time almost stayed in the same level.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Four-Dimensional Finite-Orbit-Width Fokker-Planck Code with Sources, for Neoclassical/Anomalous Transport Simulation of Ion and Electron (Final Technical Report)

Within the US Department of Energy/Office of Fusion Energy magnetic fusion research program, there is an important whole-plasma-modeling need for a radio-frequency/neutral-beam-injection (RF/NBI) transport-oriented finite-difference Fokker-Planck (FP) code with combined capabilities for 4D (2R2V) geometry near the fusion plasma periphery, and computationally less demanding 3D (1R2V) bounce-averaged capabilities for plasma in the core of fusion devices. Demonstration of proof-of-principle achievement of this goal has been carried out in research carried out under Phase I of the SBIR award. Two DOE-sponsored codes, the CQL3D bounce-average Fokker-Planck code in which CompX has specialized, and the COGENT 4D, plasma edge-oriented Fokker-Planck code which has been constructed by Lawrence Livermore National Laboratory and Lawrence Berkeley Laboratory scientists, where coupled. Coupling was achieved by using CQL3D calculated velocity distributions including an energetic tail resulting from NBI, as boundary conditions for the COGENT code over the two-dimensional velocity space on a spatial interface (flux) surface at a given radius near the plasma periphery. The finite-orbit-width fast ions from the CQL3D distributions penetrated into the peripheral plasma modeled by the COGENT code. This combined code demonstrates the feasibility of the proposed 3D/4D code. By combining these codes, the greatest computational efficiency is achieved subject to present modeling needs in toroidally symmetric magnetic fusion devices. The more efficient 3D code can be used in its regions of applicability, coupled to the more computationally demanding 4D code in higher collisionality edge plasma regions where that extended capability is necessary for accurate representation of the plasma. More efficient code leads to greater use and utility of the model. An ancillary aim of the project is to make the combined 3D/4D code user friendly. Achievement of full-coupling of these two Fokker-Planck codes will advance computational modeling of plasma devices important to the USDOE magnetic fusion energy program, in particular the DIII-D tokamak at General Atomics, San Diego, the NSTX spherical tokamak at Princeton, New Jersey, and the MST reversed-field-pinch Madison, Wisconsin. The validation studies of the code against the experiments will improve understanding of physics important for magnetic fusion, and will increase our design capabilities for achieving the goals of the International Tokamak Experimental Reactor (ITER) project in which the US is a participant and which seeks to demonstrate at least a factor of five in fusion power production divided by input power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

RAG for FLAG: AI Assistance for a Physics Code

Artificial intelligence (AI) has quickly become an important tool in scientific research, where significant efforts are underway to develop tools that will expedite the research process. One area of particular impact is scientific software, which can be particularly complex, and therefore time consuming to learn and use effectively. AI assistants are increasingly helping to streamline the process by performing tasks such as interactively answering user questions or suggesting solutions. Los Alamos National Laboratory (LANL) develops several advanced scientific codes, such as FLAG, which can be used to run multiphysics simulations. With this study, our goal was to develop an AI assistant for FLAG that could help make the process of understanding the software and running physics simulations more efficient. To develop an AI assistant for FLAG, we used a method called retrieval-augmented generation (RAG), which is a technique that uses information from relevant data sources to enhance the accuracy of large language models (LLMs). We used the FLAG user manual and other FLAG documentation as the knowledge base for the RAG system. When a user provides a query, RAG retrieves relevant sections from the knowledge base in response, then uses those excerpts to generate grounded and contextually rich answers. We found that our AI assistant was able to provide context aware answers and source references to user queries. To evaluate performance, we developed a set of 40 benchmark questions and compared the accuracy of the responses to those of two standard LLMs without retrieval. Our AI assistant significantly outperformed the standard LLMs at answering FLAG-related questions, with an 82.5% accuracy rate, compared to 47.5% for both of the standard LLMs. This has the potential to make the process of learning and using FLAG much easier, especially for new users. Ultimately, it supports LANL’s broader mission by empowering scientists and engineers to focus more on discovery and analysis rather than on navigating complex software systems.

97 MATHEMATICS AND COMPUTING↗

Coupling of Spark Plasma Sintering with Advanced Modeling to Enable Process Scale-Up: LDRD Final Project Poster

Electric-field assisted sintering (EFAS) manufacturing techniques reduce energy usage requirements, fabricate near-net-shape parts, and produce bulk nanostructured materials through rapid heating and cooling rates achievable through Joule heating. Process parameters of pulsed DC voltage and constant pressure are applied through stainless steel rams and graphite tooling to the ceramic yttrium oxide powder to be sintered. Our high-fidelity modeling code application advances manufacturing for extreme environments by enabling process-informed design and improving microstructure consistency through multiphysics multiscale process-structure-property-performance correlation simulations.

36 MATERIALS SCIENCE↗

Numerical Study on Crossflow Printed Circuit Heat Exchanger for Advanced Small Modular Reactors

Various fluids such as water, gases (helium), molten salts (FLiNaK, FLiBe) and liquid metal (sodium) are used as a coolant of advanced small modular reactors (SMRs). The printed circuit heat exchanger (PCHE) has been adopted as the intermediate and/or secondary heat exchanger of SMR systems because this heat exchanger is compact and effective. The size and cost of PCHE can be changed by the coolant type of each SMR. In this study, the crossflow PCHE analysis code for advanced small modular reactor has been developed for the thermal design and cost estimation of the heat exchanger. The analytical solution of single pass, both unmixed fluids crossflow heat exchanger model was employed to calculate a two dimensional temperature profile of a crossflow PCHE. The analytical solution of crossflow heat exchanger was simply implemented by using built in function of the MATLAB program. The effect of fluid property uncertainty on the calculation results was evaluated. In addition, the effect of heat transfer correlations on the calculated temperature profile was analyzed by taking into account possible combinations of primary and secondary coolants in the SMR systems. Size and cost of heat exchanger were evaluated for the given temperature requirement of each SMR.

42 ENGINEERING↗