Search NASA⌕ Search

SEARCH · Search NASA

Results for “American Made”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Review of the classical methods for the determination of geodetic datums

The paper examines some of the theoretical and practical aspects of (1) the relationship between the natural (astronomic) and the geometric sets of geodetic coordinates, expressed through the parameters of the geodetic datum, and (2) the reduction of the geometric and natural observations to their appropriate reference surfaces, that is, a rotational ellipsoid and the geoid, respectively. The distinction between absolute and astrogeodetic (relative) geodetic datums is made and the chief considerations for the reduction of observations are examined. Datum transformation and network distortions are discussed on the example of North American Datum 1927.

Mueller, I. I.↗
NASA NTRS1988

Bar Code Labels

American Bar Codes, Inc. developed special bar code labels for inventory control of space shuttle parts and other space system components. ABC labels are made in a company-developed anodizing aluminum process and consecutively marketed with bar code symbology and human readable numbers. They offer extreme abrasion resistance and indefinite resistance to ultraviolet radiation, capable of withstanding 700 degree temperatures without deterioration and up to 1400 degrees with special designs. They offer high resistance to salt spray, cleaning fluids and mild acids. ABC is now producing these bar code labels commercially or industrial customers who also need labels to resist harsh environments.

Source record↗
NASA NTRS1982

Primary proton and helium spectra in the energy range 10 to the 12th to 10 to the 14th eV

Measurements of proton and helium spectra have been made in the energy range 10 to the 12th to 10 to the 14th eV. Large area thin emulsion calorimeters were used in the Japanese American Cooperative Emulsion Experiment balloon flight series. Power indices of the integral spectra for both nuclei are consistent with published data at lower energies. Absolute intensities are also consistent for helium and proton fluxes with extrapolations of previous data. No steepening of the proton spectrum is indicated.

Gregory, J. C.↗
NASA NTRS1990

Structural fatigue in the 34-meter HA-Dec antennas

Structural modifications to the 34-m hour-angle-declination antennas, coupled with the use of the antennas beyond their intended lifespans, have led to structural fatigue, as evidenced by damage to the declination drive gear and cracks on the structural members and gussets. An analysis and simulation were made of the main antenna structural members. The analysis showed that the total stress to the antenna structure substantially exceeds the maximum levels recommended by the American Institute of Steel Construction (AISC). Although each of the separate static conditions of stress is only 50 percent of the total stress and does not reach the AISC reduced yield limit, fatigue can and did occur, causing the material to crack in the weakest places.

Vanhek, R. A.↗
NASA NTRS2003

OMEGA Observations of Mars Analogue Rocks

In the last 20 years, imaging spectrometry in the visible and near infrared onboard spacecraft has become an essential technique to study surfaces and atmospheres of planetary objects, prior and in addition to in-situ analyses. Remote sensing experiments analyzing the sunlight reflected by planetary surfaces can be used to derive the mineralogical composition and physical properties of the natural surfaces and atmospheres observed. This technique was successfully used on Mars with ISM instrument. As an improvement of ISM, OMEGA onboard MARS-EXPRESS will play a key role in the mineralogical mapping of the Martian surface. We present the reflectance measurements made with OMEGA during on ground calibration sessions on natural slabs of rocks and minerals part of a database which will be used on similar future American instruments (as CRISM onboard MRO). We discuss the implication on the scientific capabilities of OMEGA instrument.

Bonello, G.↗
NASA NTRS2000

Orthostatic intolerance: a disorder of young women

Orthostatic intolerance (OI) is a cause of significant disability in otherwise healthy women seen by gynecologists. Orthostatic tachycardia is often the most obvious hemodynamic abnormality found in OI patients, but symptoms may include dizziness, visual changes, discomfort in the head or neck, poor concentration, fatigue, palpitations, tremulousness, anxiety, and, in some cases, fainting (syncope). It is the most common disorder of blood pressure regulation after essential hypertension, and patients with OI are traditionally women of childbearing age. Estimates suggest that at least 500,000 Americans suffer from some form of OI, and such patients comprise the largest group referred to centers specialized in autonomic disorders. This article reviews recent advances made in the understanding of this condition, potential pathophysiological mechanisms contributing to orthostatic intolerance, and therapeutic alternatives currently available for the management of these patients.

Review, Tutorial↗
NASA NTRS1993

Past US studies and developments for planetary rovers

The history of planetary rovers in the U.S. space program is outlined in the context of the goals, mission and spacecraft designs, and operations designs. The American lunar rover work has had three main stages. In the early sixties, the capacity of Surveyor lunar landers to deliver rovers with a mass of about 50 kg to the Moon was exploited. Several such machines were built and tested beginning in 1964 but none went to the Moon. A manned 400 kg short range rover was then developed. Three of these operated on the Moon in 1971 and 1972 as part of the Apollo 15, 16 and 17 missions. Following these Apollo successes, attempts were made to provide two kinds of follow on models: automated or dual mode (human carrying or not) rovers in the few hundred kg size class, and multi-ton mobile habitats that could carry humans on extended traverses. With the closing of both Soviet and American lunar exploration in the seventies, neither of these proposals succeeded. In parallel with these lunar developments, a lengthy technology program on Martian roving has gone on in the U.S., sometimes coming close to preproject status and sometimes fading away, but never quite being abandoned. As a result it is possible today to contemplate a wide range of lunar and Martian roving missions that could be made practical within a few years. However, with today's funding constraints none of the well studied, larger mission concepts appear to fit. Therefore new efforts are being made toward developing much smaller rovers taking advantage of new miniature techniques, not only in mobility systems but also in the scientific instruments that a small rover can carry. Illustrations are included.

Burke, James D.↗
NASA NTRS2003

A Comparison of Model Calculation and Measurement of Absorbed Dose for Proton Irradiation

With the increase in the amount of time spent EVA that is necessary to complete the construction and subsequent maintenance of ISS, it will become increasingly important for ground support personnel to accurately characterize the radiation exposures incurred by EVA crewmembers. Since exposure measurements cannot be taken within the organs of interest, it is necessary to estimate these exposures by calculation. To validate the methods and tools used to develop these estimates, it is necessary to model experiments performed in a controlled environment. This work is such an effort. A human phantom was outfitted with detector equipment and then placed in American EMU and Orlan-M EVA space suits. The suited phantom was irradiated at the LLUPTF with proton beams of known energies. Absorbed dose measurements were made by the spaceflight operational dosimetrist from JSC at multiple sites in the skin, eye, brain, stomach, and small intestine locations in the phantom. These exposures are then modeled using the BRYNTRN radiation transport code developed at the NASA Langley Research Center, and the CAM (computerized anatomical male) human geometry model of Billings and Yucker. Comparisons of absorbed dose calculations with measurements show excellent agreement. This suggests that there is reason to be confident in the ability of both the transport code and the human body model to estimate proton exposure in ground-based laboratory experiments.

Zapp, N.↗
NASA NTRS2018

Cost of Quality for Government

The American society for Quality (ASQ) has recently published ASQ TR2:2018: Cost of Quality: Guidelines for Development, Implementation and Monitoring to Improve Quality and Performance.1 Efforts were made during the Technical Report drafting process to ensure that examples were provided which could apply to government services, rather than just private sector production. The concept of "Cost of Quality" was first described by Joseph Juran in 1951 and Armand Feigenbaum expanded on the topic in 1956.2 Since that time, systems have been developed by the private sector to monitor and measure these costs. The concept is often described as "cost of poor quality". ASQ sets forth guidance for development of a Cost of Quality Program in TR2:2018.

Shepherd, Christena C.↗
NASA NTRS1991

Springtime soil moisture, natural climatic variability, and North American drought as simulated by the NCAR Community Climate Model 1

Previous results concerning the role that summertime soil moisture reductions can play in amplifying or maintaining North American droughts are extended to include the role of springtime soil moisture reductions and the role that natural climatic variability, as expressed in soil moisture, can play. General circulation model (GCM) simulations with the NCAR Community Climate Model have been made with initial desert-like soil moisture anomalies imposed on 1 May and on 1 March. The May simulation maintained the imposed anomaly throughout the summer, while in the March simulation the anomaly was ameliorated within one month. Thus, the timing of soil moisture reductions may be crucial. A 10-year model control integration with prescribed sea surface temperatures yielded 1 year with late spring and summer soil moisture values similar to those of the 1 May anomaly simulation. This suggests that occasional widespread North American droughts may be an inherent feature of at least the GCM employed for this study. The results also demonstrate the important role played by moisture transport from the Gulf of Mexico in modulating or ameliorating drought conditions for much of the south-central United States, a topic that requires considerable further investigation.

Oglesby, Robert J.↗
NASA NTRS2004

Gear Performance Improved by Coating

Gears, bearings, and other mechanical elements transmit loads through contacting surfaces. Even if properly designed, manufactured, installed, and maintained, gears and bearings will eventually fail because of the fatigue of the working surfaces. Economical means for extending the fatigue lives of gears and bearings are highly desired, and coatings offer the opportunity to engineer surfaces to extend the fatigue lives of mechanical components. A tungsten-containing diamondlike-carbon coating exhibiting high hardness, low friction, and good toughness was evaluated for application to spur gears. Fatigue testing was done at the NASA Glenn Research Center on both uncoated and coated spur gears. The results showed that the coating extended the surface fatigue lives of the gears by a factor of about 5 relative to the uncoated gears. For the experiments, a lot of spur test gears made from AISI 9310 gear steel were case-carburized and ground to aerospace specifications. The geometries of the 28-tooth, 8-pitch gears were verified as meeting American Gear Manufacturing Association (AGMA) quality class 12. One-half of the gears were randomly selected for coating. The method of coating was selected to achieve desired adherence, toughness, hardness, and low-friction characteristics. First the gears to be coated were prepared by blasting (vapor honing) with Al2O3 particles and cleaning. Then, the gears were provided with a thin adhesion layer of elemental chromium followed by magnetron sputtering of the outer coating consisting of carbon (70 at.%), hydrogen (15 at.%), tungsten (12 at.%), and nickel (3 at.%) (atomic percent at the surface). In total, the coating thickness was about 2.5 to 3 microns. As compared with the steel substrate, the coated surface was harder by a factor of about 2 and had a smaller elastic modulus. All gears were tested using a 5-centistoke synthetic oil, a 10,000-rpm rotation speed, and a hertzian contact stress of at least 1.7 GPa (250 ksi). Tests were run until either surface fatigue occurred or 300 million stress cycles were completed. Tests were run using either a pair of uncoated gears or a pair of coated gears (coated gears mated with uncoated gears were not evaluated). The fatigue test results, shown on Weibull coordinates in the graph, demonstrate that the coating provided substantially longer fatigue lives even though some of the coated gears endured larger stresses. The increase in fatigue life was a factor of about 5 and the statistical confidence for the improvement is high (greater than 99 percent). Examination of the tested gears revealed substantial reductions of total wear for coated gears in comparison to uncoated gears. The coated gear surface topography changed with running, with localized areas of the tooth surface becoming smoother with running. Theories explaining how coatings can extend gear fatigue lives are research topics for coating, tribology, and fatigue specialists. This work was done as a partnership between NASA, the U.S. Army Research Laboratory, United Technologies Research Corporation, and Sikorsky Aircraft.

Krantz, Timothy L.↗
NASA NTRS2011

Hydrogen Isotope Measurements of Organic Acids and Alcohols by Pyrolysis-GC-MS-TC-IRMS

One possible process responsible for methane generation on Mars is abiotic formation by Fischer-Tropsch-type (FTT) synthesis during serpentinization reactions. Measurement of carbon and hydrogen isotopes of intermediary organic compounds can help constrain the origin of this methane by tracing the geochemical pathway during formation. Of particular interest within the context of this work is the isotopic composition of organic intermediaries produced on the surfaces of mineral catalysts (i.e. magnetite) during hydrothermal experiments, and the ability to make meaningful and reproducible hydrogen isotope measurements. Reported here are results of experiments to characterize the hydrogen isotope composition of low molecular weight organic acids and alcohols. The presence of these organic compounds has been suggested by others as intermeadiary products made during mineral surface catalyzed reactions. This work compliments our previous study characterizing the carbon isotope composition of similar low molecular weight intermediary organic compounds (Socki, et al, American Geophysical Union Fall meeting, Abstr. #V51B-2189, Dec., 2010). Our hydrogen isotope measurements utilize a unique analytical technique combining Pyrolysis-Gas Chromatograph-Mass Spectrometry-High Temperature Conversion-Isotope Ratio Mass Spectrometry (Py-GC-MS-TC-IRMS). Our technique is unique in that it carries a split of the pyrolyzed GC-separated product to a Thermo DSQ-II? quadrupole mass spectrometer as a means of making qualitative and semi-quantitative compositional measurements of separated organic compounds, therefore both chemical and isotopic measurements can be carried out simultaneously on the same sample.

Socki, Richard A.↗
NASA NTRS1996

Molecular Dynamics Calculations

The development of thermodynamics and statistical mechanics is very important in the history of physics, and it underlines the difficulty in dealing with systems involving many bodies, even if those bodies are identical. Macroscopic systems of atoms typically contain so many particles that it would be virtually impossible to follow the behavior of all of the particles involved. Therefore, the behavior of a complete system can only be described or predicted in statistical ways. Under a grant to the NASA Lewis Research Center, scientists at the Case Western Reserve University have been examining the use of modern computing techniques that may be able to investigate and find the behavior of complete systems that have a large number of particles by tracking each particle individually. This is the study of molecular dynamics. In contrast to Monte Carlo techniques, which incorporate uncertainty from the outset, molecular dynamics calculations are fully deterministic. Although it is still impossible to track, even on high-speed computers, each particle in a system of a trillion trillion particles, it has been found that such systems can be well simulated by calculating the trajectories of a few thousand particles. Modern computers and efficient computing strategies have been used to calculate the behavior of a few physical systems and are now being employed to study important problems such as supersonic flows in the laboratory and in space. In particular, an animated video (available in mpeg format--4.4 MB) was produced by Dr. M.J. Woo, now a National Research Council fellow at Lewis, and the G-VIS laboratory at Lewis. This video shows the behavior of supersonic shocks produced by pistons in enclosed cylinders by following exactly the behavior of thousands of particles. The major assumptions made were that the particles involved were hard spheres and that all collisions with the walls and with other particles were fully elastic. The animated video was voted one of two winning videos in a competition held at the meeting of the American Physical Society's Division of Fluid Dynamics, held in Atlanta, Georgia, in November 1994. Of great interest was the result that in every shock there were a few high-speed precursor particles racing ahead of the shock, carrying information about its impending arrival. Most recently, Dr. Woo has been applying molecular dynamics techniques to the problem of determining the drag produced by the space station truss structure as it flies through the thin residual atmosphere of low-Earth orbit. This problem is made difficult by the complex structure of the truss and by the extreme supersonic nature of the flow. A fully filled section of the truss has already been examined, and drag predictions have been made. Molecular dynamics techniques promise to make realistic drag calculations possible even for very complex partially filled truss segments flying at arbitrary angles.

Source record↗
NASA NTRS1985

Precision geodesy using the Mark-III very-long-baseline interferometer system

Very-long-baseline interferometry (VLBI) has been used to make precise measurements of the vector separation between widely separated antennas. The system for acquiring and processing VLBI data known as Mark-III is described. Tests of the system show it to have millimeter-level accuracy on short baselines; measurements of baselines longer than a few hundred kilometers suggest that accuracy is limited by the uncertainty in the calibration of tropospheric path delay to the level of a few centimeters. VLBI experiments conducted between 1976 and 1983 have demonstrated the stability of the North American plate by showing that there is no change in the distance between eastern California and Massachusetts at the level of a few millimeters per year or greater. Experiments made from 1980 to 1984 indicate that the distance from Massachusetts to Sweden is increasing by 1.7 + or - 1 cm/year where the quoted standard deviation includes the estimated effects of systematic errors.

Clark, T. A.↗
NASA NTRS2021

Grand Challenges in Soft Matter Science: Prospects for Microgravity Research

At the suggestion of NASA’s Physical Science Research Program in the Space Life and Physical Science Research and Application Division, Paul Chaikin, Noel Clark, and Sidney Nagel organized a focus session and workshop for the 2020 American Physical Society (APS) March meeting under the auspices of the Division of Soft Matter. Three overarching themes emerged from the workshop and are presented with additional details: •Machines made out of machines •Scalable self-sustaining ecosystems •Active materials and metamaterials This report lays out only some of the potential directions for soft matter dynamics over the next two decades. It also lays out the role that gravity plays in the organization of the basic building blocks of matter. Not only will research on soft matter have tremendous application towards understanding its behavior in our terrestrial environment, but also potentially in other NASA programs such as planetary science, exploration, robotics, etc.

Microgravity↗
NASA NTRS2021

Chapter 1: Self-organization only possible far from equilibrium--machines making machines

At the suggestion of NASA’s Physical Science Research Program in the Space Life and Physical Science Research and Application Division, Paul Chaikin, Noel Clark, and Sidney Nagel organized a focus session and workshop for the 2020 American Physical Society (APS) March meeting under the auspices of the Division of Soft Matter. Three overarching themes emerged from the workshop and are presented with additional details: • Machines made out of machines • Scalable self-sustaining ecosystems • Active materials and metamaterials This report lays out only some of the potential directions for soft matter dynamics over the next two decades. It also lays out the role that gravity plays in the organization of the basic building blocks of matter. Not only will research on soft matter have tremendous application towards understanding its behavior in our terrestrial environment, but also potentially in other NASA programs such as planetary science, exploration, robotics, etc. Attached is a White Paper for the Decadal Survey that consists of an extended Title along with the previous Introduction and Chapter 2.1 from NASA/CP-20205010493.

soft matter↗
NASA NTRS2021

Chapter 2: Instrumentation--from neuromorphic computing to large-scale self-assembly

At the suggestion of NASA’s Physical Science Research Program in the Space Life and Physical Science Research and Application Division, Paul Chaikin, Noel Clark, and Sidney Nagel organized a focus session and workshop for the 2020 American Physical Society (APS) March meeting under the auspices of the Division of Soft Matter. Three overarching themes emerged from the workshop and are presented with additional details: • Machines made out of machines • Scalable self-sustaining ecosystems • Active materials and metamaterials This report lays out only some of the potential directions for soft matter dynamics over the next two decades. It also lays out the role that gravity plays in the organization of the basic building blocks of matter. Not only will research on soft matter have tremendous application towards understanding its behavior in our terrestrial environment, but also potentially in other NASA programs such as planetary science, exploration, robotics, etc. Attached is a White Paper for the Decadal Survey that consists of an extended Title along with the previous Introduction and Chapter 2.2 from NASA/CP-20205010493.

Soft Matter↗
NASA NTRS2021

Chapter 3: Suspensions, foams, emulsions, colloids, and granular materials--self-healing, tuning gravity, and life support for exploration

At the suggestion of NASA’s Physical Science Research Program in the Space Life and Physical Science Research and Application Division, Paul Chaikin, Noel Clark, and Sidney Nagel organized a focus session and workshop for the 2020 American Physical Society (APS) March meeting under the auspices of the Division of Soft Matter. Three overarching themes emerged from the workshop and are presented with additional details: • Machines made out of machines • Scalable self-sustaining ecosystems • Active materials and metamaterials This report lays out only some of the potential directions for soft matter dynamics over the next two decades. It also lays out the role that gravity plays in the organization of the basic building blocks of matter. Not only will research on soft matter have tremendous application towards understanding its behavior in our terrestrial environment, but also potentially in other NASA programs such as planetary science, exploration, robotics, etc. Attached is a White Paper for the Decadal Survey that consists of an extended Title along with the previous Introduction and Chapter 2.3 from NASA/CP-20205010493.

Soft matter↗