Search NASA⌕ Search

SEARCH · Search NASA

Results for “Amorphous materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Probing Carbon Mineralization Mechanisms in Pore and Bulk Fluids by Harnessing Architected Calcium Silicates

The ability to synthesize materials with well-controlled pore structures gives us unprecedented control over probing fluid interactions with reactive interfaces and advancing calibrated insights into coupled chemo-morphological interactions. One of the primary challenges in developing crystalline silicate materials lies in achieving ordered pore structures. Existing approaches of producing amorphous mesoporous metal silicates via sol–gel methods and heat-treatment of these materials to produce crystalline phases cause the pore structures in the amorphous phases to collapse. To overcome this challenge, carbon coating of amorphous mesoporous calcium silicate particles is carried out to retain the pore structure, while the material is heated to produce crystalline calcium silicate with calcium sulfate inclusions. The pore diameter in these materials is about 3.9 nm, with a surface area and a pore volume of 28.75 m 2 /g and 0.092 cm 2 /g, respectively. The mechanisms of carbon mineralization are investigated by reacting architected calcium silicate with 1 M Na 2 CO 3 and monitoring the evolution in the structural phases using operando wide-angle X-ray scattering (WAXS) measurements. Formation of stable calcium carbonate polymorph or calcite and metastable calcium carbonate polymorph or vaterite in pore and bulk fluids, respectively, resulting from the reaction between Na 2 CO 3 and CaSiO 3 , are noted. The mechanisms associated with carbon mineralization are delineated using ReaxFF molecular dynamics (MD) simulations. The surface dissolution reaction is initiated by 2H + ions that replace a Ca 2+ ion in the Ca–silicate matrix. Ca 2+ ions in the solution initially react with water to form calcium hydroxide and eventually form calcium (bi)carbonate. A slow and gradual increase in the formation of sodium silicate in the solution resulting from the reactions of silicic acid or the silicon dioxide reaction with sodium hydroxide is noted. When carbon mineralization occurs in environments bearing interfacial fluids, calcite is the dominant calcium carbonate polymorph, as determined using experiments with pore fluids and molecular-scale simulations. In conclusion, these studies provide fundamental insights into the mechanisms underlying the carbon mineralization of calcium silicate informed by experiments and molecular-scale simulations.

Calcium↗
DOE OSTI2025

Ultra-thin photonic crystal slab metalenses [Invited]

We report a novel ultra-thin metalens design based on photonic crystal slab (PCS) resonance modes. We experimentally verified with a metalens structure based on amorphous silicon on a quartz material platform by implementing the optical guided resonance on the PCS. The PCS metalens designs feature an ultra-thin device layer of about 160 nm at an operation wavelength of 940 nm. A full 2π transmission phase transition is realized by varying the air hole sizes at the design wavelength. Metalens devices with different phase change gradients were designed and fabricated to achieve different NAs. A maximum of 86.4% focusing efficiency is achieved. Imaging capabilities are characterized, and clear images are observed within the field of view. The PC resonance-based phase modulation design can be applied to optical beam manipulation, phase plate design, imaging, and laser beam formation applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Relationship between atomic and electronic structure in Ln-bearing oxides

Metastable states of matter are of great interest as they offer the promise of novel functionality. They are often a natural consequence of exposure to nonequilibrium environments. In oxides, metastability can take the form of new polymorphs, chemical disorder, and even amorphization. While significant attention has been given to the impact those changes have on the atomic properties of the material, the corresponding changes in the electronic structure have received less attention. Here, using density functional theory, we consider how the electronic structure varies with potential metastable structures in two classes of lanthanide-bearing oxides—pyrochlores and interlanthanide sesquioxides. We find that the changes depend strongly on both the crystal structure and crystal chemistry of the compound with, for example, disordering and amorphization either increasing or decreasing the bandgap depending on the chemistry. For the 𝐴 2 ⁢𝐵 2 ⁢O 7 pyrochlores, we find different dependencies of the bandgap on the 𝐴 = 𝐿⁢𝑛 cations as the 𝐵 cation is changed, which we relate to the nature of the density of states at the conduction band minimum for different 𝐵 chemistries. Our calculations are validated by electron energy loss spectroscopy measurements for two pyrochlore compounds in which amorphization does reduce the bandgap, consistent with our calculations on these two compounds. In conclusion, our results highlight the relationship between atomic and electronic structure and how radiation can be used to modify and potentially control the electronic properties of oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A novel method may reveal bulk metallic glass compressive ductility trends in high data rate nanoindentation

Recent methods allow novel amorphous alloy compositions to be rapidly manufactured at small scale; however, obtaining materials properties such as compressive ductility from these smaller specimens has remained a challenge. Here, we suggest a potential high-throughput nanoindentation method that may be able to rapidly characterize the relative compressive ductility between these alloys based on their serration characteristics. The properties of emergent serrations, when interpreted in a simple micromechanical stress relaxation model, may order these materials by their compressive plastic strain to failure. These results are consistent with the ordering obtained from compressed specimens as well as with model simulations, suggesting that this model may be broadly useful for interpreting compressive ductility from nanoindentation serrations. After it is validated on more materials, this new method will match the rapid pace of amorphous alloy development, thus allowing metallic glass properties to be fine-tuned for each application prior to scale prototyping.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Amorphous zinc–molybdenum–sulfide chalcogel as a long-cycle, high-capacity electrode for lithium-ion batteries

The inherent limitations of intercalation-based electrodes in lithium-ion batteries have prompted the search for alternative materials with higher specific capacities and robust electrochemical stability. Sulfur-based electrodes, despite their high theoretical capacities (1672 mAh g −1 ), typically suffer from poor cycling performance. In this work, zinc molybdenum polysulfide (Zn x Mo 3 S 13 , 0.5 ≤ x), an amorphous semiconductor chalcogel, exhibits high specific capacity and excellent cycling stability. Synchrotron X-ray pair distribution function and extended X-ray absorption fine structure analyses reveal a short-range atomic structure comprising Mo–Mo, M–S (M = Mo, Zn), and S–S bonding motifs. The coordination environment of Mo and S closely resembles that of Mo 3 S 13 clusters, interconnected via S–S bridges and Zn 2+ cations. The Li/Zn x Mo 3 S 13 cell delivers an initial discharge capacity of 844 mAh g −1 at C/3, and retains 386.2 mAh g −1 after 1000 cycles with an average coulombic efficiency of 99.99%. The distribution of relaxation times analysis confirms the formation of a stable solid electrolyte interphase, which underpins the cell's long-term stability. In conclusion, this outstanding performance is attributed to the synergistic effects of the chalcogel's unique amorphous framework, semiconductive character, Zn-mediated polysulfide anchoring, and structural resilience, positioning Zn x Mo 3 S 13 chalcogel among the most durable pure metal sulfide cathodes reported for next-generation LIBs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Elucidation of Local Ordering and Atomic-Scale Structure in Polymer-Derived SiOC

Silicon oxycarbide (SiOC) is a versatile ceramic material with tunable microstructure and compositions that can be modulated through precursor chemistry and processing conditions. Though there are several noteworthy uses of SiOC across a range of application spaces, the difficulties in elucidating the short- to medium-range order within these materials have limited the maturation of strategies to precisely control SiC x O 4–x compositions for user-tailored applications. In this contribution, we implement a range of synchrotron scattering and spectroscopy methods coupled with stochastic modeling techniques to elucidate changes in local chemistry and structure associated with the pyrolysis of a commercially available SiOC polymer precursor. Stochastic modeling approaches provide valuable insights into decoupling local Si–O and Si–C environments while confirming predominate heterogeneous phases in materials. Using pyrolysis temperatures between 250 to 800 °C results in a heterogeneous material predominately composed of SiOC and amorphous SiO 2 domains. At 1100 °C, redistribution of Si–C pairs in the SiOC network and Si–O from the SiO 2 domains create a more ordered SiOC phase with local cubic SiC-like ordering. In addition, residual carbon leads to a detectable carbon phases at 1100 °C that persist at higher temperatures. These efforts address the difficulties of obtaining atomic-scale insights into the local structure and nanoscale heterogeneities in SiOC, providing pathways toward establishing structure–property relationships for future materials development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

High-Power Impulse Magnetron Sputter Deposition of Ultrathick Amorphous Carbon

Diamond-like carbon (DLC) is a material of interest for inertial confinement fusion (ICF) ablators. However, the deposition of ultrathick DLC coatings, as required for ICF ablator fabrication, remains a challenge. Here, in this study, we use high-power impulse magnetron sputtering to deposit DLC and demonstrate a set of process parameters leading to high-purity, amorphous DLC coatings with a low compressive residual stress of <400 MPa. Coatings with thicknesses of up to 80 μm are demonstrated.

amorphous carbon↗
DOE OSTI2024

Influence of temperature, doping, and amorphization on the electronic structure and magnetic damping of iron

Hybrid magnonic quantum systems have drawn increased attention in recent years for coherent quantum information processing, but too large magnetic damping is a persistent concern when metallic magnets are used. Their intrinsic damping is largely determined by electron-magnon scattering induced by spin-orbit interactions. In the low scattering limit, damping is dominated by intra-band electronic transitions, which has been theoretically shown to be proportional to the electronic density of states at the Fermi level. In this work, we focus on body-centered-cubic iron as a paradigmatic ferromagnetic material. We comprehensively study its electronic structure using first-principles density functional theory simulations and account for finite lattice temperature, boron (B) doping, and structure amorphization. Our results indicate that temperature induced atomic disorder and amorphous atomic geometries only have a minor influence. Instead, boron doping noticeably decreases the density of states near the Fermi level with an optimal doping level of 6.25%. In addition, we show that this reduction varies significantly for different atomic geometries and report that the highest reduction correlates with a large magnetization of the material. Furthermore, this may suggest materials growth under external magnetic fields as a route to explore in experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Durable Thin‐Film Porous Transport Electrodes for High Current Density PEM Water Electrolysis

Proton exchange membrane water electrolyzers rely on relatively expensive Ir-based catalysts for efficient and durable hydrogen production. To reduce system costs, Ir loadings can be reduced if performance and durability are maintained. Sputter deposition is a readily scalable method to synthesize uniform, low-loading catalyst layers with controlled composition. A catalyst applied directly to the porous transport layer can have advantages for performance, manufacturing simplicity, and catalyst recovery. Suitable porous transport layer porosity can minimize activity losses when reducing loadings. Here, methods are presented to deposit metallic Ir as well as amorphous and rutile Ir oxides. The activity and durability of these materials in the porous transport electrode architecture is evaluated. The metallic and amorphous forms have better initial activity, however, operation at 3 A cm −2 with 0.1 mg Ir cm −2 shows that only rutile IrO 2 maintains performance beyond 100 h with a 50 mV improvement after 700 h. A >10x reduced dissolution rate is shown for rutile IrO 2 . With a low-porosity transport layer and 0.4 mg Ir cm −2 , a steady-state voltage decay rate of 6 µV h −1 is achieved. The results demonstrate that sputter-deposited rutile IrO 2 porous transport electrodes with low Ir loading can be operated at high current density to reduce hydrogen production costs.

08 HYDROGEN↗
DOE OSTI2025

Mapping Thermal Conductivity at the Atomic Scale: A Step toward the Thermal Design of Materials

We describe a spatial decomposition of the thermal conductivity, termed site-projected thermal conductivity, which quantifies the thermal conduction activity at each atomic site—a critical parameter for the thermal design of materials. The method is based on the Green–Kubo formula and the harmonic approximation and requires the force-constant and dynamical matrices, as well as a relaxed structural model. Throughout the study, it uses high quality models previously tested and compared to many experiments. It discusses the method and underlying approximations for amorphous silicon, carries the detailed analysis for amorphous silicon, and then examines an amorphous-crystal silicon interface and representative carbon materials. This study identifies the sites and local structures that reduce heat transport, and quantify these (estimate the spatial range) over which these “thermal defects” are effective. It identifies filamentary structures in the amorphous silicon network which impact heat transport and electronic structure (the Urbach edge) and electronic transport.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Photoluminescence Probes Ion Insertion into Amorphous and Crystalline Regions of Organic Mixed Conductors

Abstract Organic mixed ionic‐electronic conductors (OMIECs) have emerged as promising materials for a wide range of next‐generation technologies, including bioelectronics and neuromorphic computing. The performance of these materials depends on the transport of ions through the polycrystalline polymer matrix as well as how the distribution of ions and polarons in crystalline and amorphous regions impacts electronic transport. However, it is often challenging to distinguish whether ions enter crystalline or amorphous regions. In this work, steady‐state and time‐resolved photoluminescence (PL) spectroelectrochemistry is used to probe initial ion insertion in crystalline and amorphous regions of the OMIEC material poly(3‐[2‐[2‐(2‐methoxyethoxy)ethoxy]ethyl]thiophene ‐2,5‐diyl) (P3MEEET) as a function of applied voltage. It is found that PL spectroelectrochemistry reports on the initial stages of electrochemical doping through the quenching of PL emission. By distinguishing between amorphous and crystalline contributions to the PL spectrum, ion insertion in crystalline and amorphous regions as a function of voltage is tracked. It is found that PL spectroelectrochemistry is much more sensitive to the initial injection of ions than complementary methods, highlighting its potential as a sensitive tool for interrogating ion injection in OMIECs.

Collins, Garrett W.↗
DOE OSTI2025

Diffusion coefficients predicting facet-dependent crystallization in amorphous silicon nitride

Amorphous silicon nitride is a common material in microelectronics devices, which acts as an insulating barrier. Extended annealing times at elevated temperature can initiate crystallization of α-Si 3 ⁢ N 4 , which does not possess the same barrier properties. Molecular dynamics can resolve the fundamental mechanism for α-Si 3 ⁢N 4 crystallization and the influence of local environments. Here, we compare two interatomic potentials and conclude that these models predict structural features (e.g., angular distributions and densities) which span the range of experimental measurements. We confirmed these models reproduce experimental estimates of activation energy and leveraged these models to identify crystallization drivers. We conclude that near-T g , facet-dependent silicon nitride crystal growth rates can be predicted directly by either bulk or interfacial diffusion properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Carbon doping in GeTe drives differences in local structure and properties

Advances in low-power, energy-efficient information storage and computing require understanding and controlling the atomic and nanoscale structures of functional materials, such as phase-change materials. Phase-change memory technology enables nonvolatile, low-power memory in devices by storing information through reversible changes in a phase-change material's atomic structure (i.e., transformations between amorphous and crystalline phases) that have corresponding changes in properties, including electronic resistivity and optical reflectivity. Here, we apply complementary X-ray absorption spectroscopy and X-ray pair distribution function analyses to experimentally identify the local- and medium-range atomic structure differences of GeTe and C-doped GeTe thin films. Upon controlled heating, composition- and temperature-dependent atomic structure evolution in GeTe and C-doped GeTe films shows differences in bonding behavior and local structure that directly influence crystallization onset temperature. We find that the introduction of C interrupts Ge–Ge bonds in amorphous GeTe, altering the as-deposited structure to be more similar to the distorted rocksalt structure of crystalline α–GeTe. The change alters the response of the amorphous atomic structure to heating and also lowers the crystallization onset temperature, from 230 °C in GeTe to 220 °C in the C-doped film. The combined insights from both X-ray techniques provide understanding of structural transformations that enables the development and optimization of next-generation memory and computing materials.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Exfoliation of Cu-Containing Poly(triazine imide): From Three-Dimensional to Two-Dimensional Particle Morphology

Controlling the morphological parameters of extended covalent organic frameworks remains challenging and represents an important yet often elusive metric of consideration. Typically, carbon nitride materials possess local ordering but remain largely amorphous in terms of their long-range order and orientation. This study probes the synthesis of a crystalline carbon nitride, poly(triazine imide) lithium bromide which possesses an atomically-precise extended structure, and demonstrates its exfoliation into a two-dimensional hexagonal sheet-like morphology. Furthermore, a previously unreported carbon nitride material, poly(triazine imide) copper bromide, or PTI-CuBr, was developed through an additional flux-assisted cation-exchange process and is shown to retain its internal Cu cations during solvothermal exfoliation. Characterization by dynamic light scattering and high-angle annular dark-field scanning electron microscopy reveals the morphological changes and captures the high aspect ratio of the thin carbon nitride sheets with <10 nm thickness while maintaining hundreds of nm in width. Additional characterization by energy-dispersive spectroscopy and X-ray photoelectron spectroscopy confirms that the Cu:Br:N molar ratio was maintained within the extended layers throughout the exfoliation process. This top-down synthesis approach differs from typical methods that isolate thin sheets for subsequent metal−cation coordination and illustrates the importance of maintaining oxygen-free conditions to minimize copper clustering. Thus, this new approach is demonstrated to provide a consistent and more homogeneous occupancy of the PTI pore spaces throughout the carbon nitride framework.

Exfoliation↗
DOE OSTI2025

Kinetics of amorphous defect phases measured through ultrafast nanocalorimetry

Recognition of the role of extended defects on local phase transitions has led to the conceptualization of the defect phase, localized thermodynamically stable interfacial states that have since been applied in a myriad of material systems to realize significant enhancements in material properties. Here, we explore the kinetics of grain boundary confined amorphous defect phases, utilizing the high temperature and scanning rates afforded by ultrafast differential scanning calorimetry to apply targeted annealing/quenching treatments at high rates capable of capturing the kinetic behavior. Four Al-based nanocrystalline alloys, including two binary systems, Al–Ni and Al–Y, and two ternary systems, Al–Mg–Y and Al–Ni–Y, are selected to probe the materials design space (enthalpy of mixing, enthalpy of segregation, chemical complexity) for amorphous defect phase formation and stability, with correlative transmission electron microscopy applied to link phase evolution and grain stability to nanocalorimetry signatures. A series of targeted isothermal annealing heat treatments is utilized to construct a Time–Temperature-Transformation curve for the Al–Ni system, from which a critical cooling rate of 2400 °C/s was determined for the grain boundary confined disordered-to-ordered transition. Finally, a thermal profile consisting of 1000 repeated annealing sequences was created to quantify the recovery of the amorphous defect phase following sequential annealing treatments, with results indicating remarkable microstructural stability after annealing at temperatures above 90% of the melting temperature. This work contributes to a deeper understanding of grain boundary localized thermodynamics and kinetics, with potential implications for the design and optimization of advanced materials with enhanced stability and performance.

Amorphous defect phases↗
DOE OSTI2025

Characterizing sample degradation from synchrotron based X-ray measurements of ultra-thin exfoliated flakes

It is undeniable that novel 2D devices and heterostructures will have a lasting impact on the advancement of future technologies. However, the inherent instability of many exfoliated van der Waals (vdW) materials is a well-known hurdle yet to be overcome. Thus, the sustained interest in exfoliated vdW materials underscores the importance of understanding the mechanisms of sample degradation to establish proactive protective measures. Here, the impact of prolonged synchrotron-based X-ray beam exposure on exfoliated flakes of two contemporary vdW materials, NiPS 3 and α-RuCl 3 , is explored using resonant inelastic X-ray scattering (RIXS) and total fluorescence yield X-ray absorption spectroscopy (XAS). In NiPS 3 , the resulting RIXS and XAS spectra show a suppression, then vanishing, of NiS 6 multiplet excitations coupled with an upward shift of the peak energy of the XAS as a function of X-ray dose. In α-RuCl 3 , the signs of beam damage from the RIXS spectra are less evident. However, the post-experiment characterization of both materials using Raman spectroscopy exhibits signals of an amorphous and disordered system compared to pristine flakes; in addition, energy-dispersive X-ray spectroscopy of NiPS 3 shows evidence of ligand vacancies. As synchrotron radiation is fast becoming a required probe to study 2D vdW materials, these findings lay the groundwork for the development of future protective measures for synchrotron-based prolonged X-ray beam exposure, as well as for X-ray free electron laser.

2D magnetism↗
DOE OSTI2025

When more data hurts: Optimizing data coverage while mitigating diversity-induced underfitting in an ultrafast machine-learned potential

Machine-learned interatomic potentials (MLIPs) are becoming an essential tool in materials modeling. However, optimizing the generation of training data used to parametrize the MLIPs remains a significant challenge. This is because MLIPs can fail when encountering local environments too different from those present in the training data. The difficulty of determining a priori the environments that will be encountered during molecular dynamics simulation necessitates diverse, high-quality training data. Here, this study investigates how training data diversity affects the performance of MLIPs using the Ultra-Fast force field (UF 3 ) to model amorphous silicon nitride. We employ expert and autonomously generated data to create the training data and fit four force field variants to subsets of the data. Our findings reveal a critical balance in training data diversity: insufficient diversity hinders generalization, while excessive diversity can exceed the MLIP's learning capacity, reducing simulation accuracy. Specifically, we found that the UF 3 variant trained on a subset of the training data, in which nitrogen-rich structures were removed, offered vastly better prediction and simulation accuracy than any other variant. By comparing these UF 3 variants, we highlight the nuanced requirements for creating accurate MLIPs, emphasizing the importance of application-specific training data to achieve optimal performance in modeling complex material behaviors.

ab initio molecular dynamics↗
DOE OSTI2025

Encapsulation of Monolayer 2D Materials Using Kinetic Energy-Controlled Pulsed Laser Deposition

The integration of monolayer (ML) two-dimensional (2D) materials into next-generation microelectronics, optoelectronics, and sensors is hindered by their sensitivity to environmental exposure. Deposition of additional layers for encapsulation or growth on ML 2D materials by versatile but energetic plasma techniques such as pulsed laser deposition (PLD) has not been considered at the monolayer level because of potential damage caused by hyperthermal species with kinetic energies (KEs) exceeding the threshold displacement energy (TDE) of the ML. Here, we describe a general strategy to understand and mitigate damage during PLD by reducing the incident KE of ablated species below the TDE of the 2D monolayer using background gas collisions. Ion flux diagnostics, combined with in situ Raman spectroscopy of monolayer graphene during PLD of amorphous boron nitride (a-BN) as a dielectric encapsulation layer, show that damage is primarily correlated with fast ions that penetrate the background gas in accordance with Beer’s Law and are often overlooked in ICCD imaging due to the dominance of the bright, delayed plasma luminescence. Significantly, if fast ions are eliminated and a ∼2 nm-thick a-BN layer is “soft landed”, the monolayer graphene is effectively protected from damage by high KE species in the boron nitride plasma plume. Deposited a-BN films display a characteristic dielectric constant of 3.6 at 100 kHz and tunable charge injection properties. Our results enable PLD as a viable option for encapsulation and thin film growth onto ML 2D materials, with implications for both fundamental research and device integration.

2D materials↗