Search NASA⌕ Search

SEARCH · Search NASA

Results for “Applied Visualization Laboratory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A Perspective into Operando Methods for Probing Catalytic Interfaces

Rational design of electrocatalysts for (photo)electrochemical (PEC) processes like hydrogen and oxygen evolution and CO2 reduction reactions is aided by the recent improvements in capabilities of operando measurements, where morphology, composition, and/or function are probed during active catalysis. Through operando microscopy and spectroscopy, structure, catalytic microenvironment, oxidation state, adsorbates, and products can be measured to gain a better understanding of catalyst behavior and suggest possible improvements. Visualizing evolving catalyst morphologies, surface compositions, and electrochemical behavior also helps address many fundamental research questions for a better understanding of catalytic mechanisms. Correlating morphology with chemical identity or functional behavior using a variety of innovative microscopy methods is particularly promising for guiding development of next generation catalysts, and there are also many recent examples of using AI and robotics tools to innovate and speed development. In this Perspective, advances made over the past few years in operando imaging of catalysts relevant to solar fuels will be explored, followed by an outlook on technological developments in instrumentation, sample design, and computational power that may be applied to this field.

Catalysts↗
DOE OSTI2025

TR-XPS Realtime Analysis Tool (ArroyoXPS) v0.1

The ALS has developed a Time-Resolved X-ray Photoelectron Spectroscopy (TR-XPS) technique, which involves applying a specific pattern of voltage curves to a sample while measuring XPS peaks. This pattern is repeated over multiple cycles, and changes in the material's response provide valuable scientific insights. Traditionally, file-based analysis workflows have been used: scans are run for a predetermined time, and after one or more scans are complete, calculations are made. ArroyoXPS changes this by offering in-experiment scan and analysis, allowing researchers to gain insights before a scan is finished. This enables them to adjust experimental parameters quickly, potentially saving valuable beamtime. ArroyoXPS includes tools for integrating with beamline control systems, performing analysis, and visualizing scan data in a web browser.

McReynolds, Dylan [Lawrence Berkeley National Labo↗
DOE OSTI2026

Unsupervised anomaly detection in MeV ultrafast electron diffraction

MeV ultrafast electron diffraction (MUED) is a pump-probe technique used to study the dynamic structural evolution of materials. An ultrashort laser pulse triggers structural changes, which are then probed by an ultrashort relativistic electron beam. To overcome low signal-to-noise ratios, diffraction patterns are averaged over thousands of shots. However, shot-to-shot instabilities in the electron beam can distort individual patterns, introducing uncertainty. Improving MUED accuracy requires detecting and removing these anomalous patterns from large datasets. In this work, we developed a fully unsupervised methodology for the detection of anomalous diffraction patterns. Using a convolutional autoencoder, we calculate the reconstruction mean squared error of the diffraction patterns. Based on the statistical analysis of this error, we provide the user an estimation of the probability that the pattern is normal, which also allows a posterior visual inspection of the images that are difficult to classify. This method has been trained with only 100 diffraction patterns and tested on 1521 patterns, resulting in a false positive rate between 0.2% and 0.4%, with a training time of 10 s per image and a test time of about 1 s per image. Here, the proposed methodology can also be applied to other diffraction techniques in which large datasets are collected that include faulty images due to instrumental instabilities.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Quartz Ampoule Loading, Sealing, and Inspection

This procedure applies to the loading of materials into quartz ampoules and flame sealing these ampoules. Flame sealed quartz ampoules are commonly used as a sealed containment for neutron irradiation. Due to the importance of maintaining containment for this application, this procedure involves a double encapsulation design wherein a sealed inner ampoule is sealed is in turn sealed within a larger diameter outer ampoule. General guidance for inspection of ampoules by destructive, non-destructive, qualitative (e.g., visual) and other methods are given. Materials to be placed inside the ampoules may consist of stable element materials or radioactive materials in either solid or liquid form. Liquids shall be dried prior to sealing the ampoule.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Discovery of spontaneous mesoscopic strain waves in nematic domains using dark-field x-ray microscopy

Electronic nematic order arises when correlated electrons spontaneously break the rotational symmetry of a crystal lattice. When electronic nematic order couples bilinearly to symmetry-breaking lattice strain, both appear together at a single ferroelastic phase transition, producing structural twin domains with distinct orientations of the nematic director. While the effects of applied strain on these domains are well established, the intrinsic behavior of spontaneous subdomain strain fields has remained unexplored. Here, we report the discovery of spontaneous mesoscopic strain waves within individual nematic domains of an iron-based superconductor, observed using dark-field x-ray microscopy (DFXM). Using this advanced full-field imaging technique, we visualize subdomain strain modulations emerging concurrently with nematic order. Elastic compatibility relations governing inhomogeneous strains provide a natural mechanism for the strain waves. Our findings reveal a broadly relevant form of strain self-organization and position DFXM as a powerful probe of the local interplay between lattice strain and electronic order.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bubble Transport through a Porous Lattice with an Applied Inlet Flow

Within gas-evolving electrochemical systems, bubbles negatively impact performance by covering electrode active sites for reactions, blocking electric field lines, and obstructing liquid electrolyte flow causing pressure buildup. Recent additive manufacturing advances have enabled tuned porous electrode microstructures to be created, but producing systems that maximize electrochemical throughput and minimize bubble impact remains challenging. Thus, improved physical understanding of and modeling capabilities for bubble behavior are critical to improve electrolyzer design. To address this need, this study examines rising stage bubbles within a lattice with an applied liquid flow—an underexplored regime that strongly influences an electrochemical bubble’s fate. Notably, theoretical predictions and resolved bubble simulations are complemented by experiments from a 3D-printed visualization cell that matches the simulation geometry. The minimum threshold flow rate to achieve bubble breakthrough is found to be larger for higher porosities and for smaller bubbles. Different-sized bubbles decrease expected electrochemical performance in different ways; smaller bubbles tend to stay stuck but cover less solid surface, while larger bubbles more readily break through but cover more surface while in the lattice. The bubble trajectory, deformation, and contact area provide insight into these different behaviors. These findings provide design guidelines toward creating more effective electrolyzers.

Guo, Jack [Lawrence Livermore National Laboratory ↗
NASA NTRS1997

Real Time Quantitative 3-D Imaging of Diffusion Flame Species

A low-gravity environment, in space or ground-based facilities such as drop towers, provides a unique setting for study of combustion mechanisms. Understanding the physical phenomena controlling the ignition and spread of flames in microgravity has importance for space safety as well as better characterization of dynamical and chemical combustion processes which are normally masked by buoyancy and other gravity-related effects. Even the use of so-called 'limiting cases' or the construction of 1-D or 2-D models and experiments fail to make the analysis of combustion simultaneously simple and accurate. Ideally, to bridge the gap between chemistry and fluid mechanics in microgravity combustion, species concentrations and temperature profiles are needed throughout the flame. However, restrictions associated with performing measurements in reduced gravity, especially size and weight considerations, have generally limited microgravity combustion studies to the capture of flame emissions on film or video laser Schlieren imaging and (intrusive) temperature measurements using thermocouples. Given the development of detailed theoretical models, more sophisticated studies are needed to provide the kind of quantitative data necessary to characterize the properties of microgravity combustion processes as well as provide accurate feedback to improve the predictive capabilities of the computational models. While there have been a myriad of fluid mechanical visualization studies in microgravity combustion, little experimental work has been completed to obtain reactant and product concentrations within a microgravity flame. This is largely due to the fact that traditional sampling methods (quenching microprobes using GC and/or mass spec analysis) are too heavy, slow, and cumbersome for microgravity experiments. Non-intrusive optical spectroscopic techniques have - up until now - also required excessively bulky, power hungry equipment. However, with the advent of near-IR diode lasers, the possibility now exists to obtain reactant and product concentrations and temperatures non-intrusively in microgravity combustion studies. Over the past ten years, Southwest Sciences has focused its research on the high sensitivity, quantitative detection of gas phase species using diode lasers. Our research approach combines three innovations in an experimental system resulting in a new capability for nonintrusive measurement of major combustion species. FM spectroscopy or high frequency Wavelength Modulation Spectroscopy (WMS) have recently been applied to sensitive absorption measurements at Southwest Sciences and in other laboratories using GaAlAs or InGaAsP diode lasers in the visible or near-infrared as well as lead-salt lasers in the mid-infrared spectral region. Because these lasers exhibit essentially no source noise at the high detection frequencies employed with this technique, the achievement of sensitivity approaching the detector shot noise limit is possible.

Kane, Daniel J.↗
DOE OSTI2025

VARI3D & PERSENT: Perturbation and Sensitivity Analysis

The nodal diffusion method is one of the most widely used approaches in modern reactor analysis. In the nodal diffusion method, a coarse multi-group set of “homogenized” parameters is constructed such that the complex geometry of a reactor core along with the energy dependence of neutron and gamma ray cross sections in a nuclear reactor are conserved in the simpler geometry. The homogenization is typically done on a fuel assembly level as is the case in the DIF3D code developed at Argonne National Laboratory. The nodal methodology is used primarily to predict fuel cycle behavior of nuclear systems of which there is a substantial amount of validation in the literature. Another use of the nodal method is to obtain reactivity coefficients and kinetics parameters for use in a safety analysis of a given nuclear reactor. While there are many ways to obtain reactivity worth and kinetics parameters, the work presented in this manuscript is unique as it provides the user with the ability to compute reactivity worths, kinetics parameters, and cross section sensitivities with a Cartesian and hexagonal geometry based transport code. This manuscript serves as a single manual for two separate codes: VARI3D and PERSENT. The VARI3D code (VARIational 3D) is based upon the classic finite difference diffusion theory solver available in DIF3D. The PERSENT code (PERturbation and SENitivity for Transport) is based upon the variational nodal method employed in DIF3D termed VARIANT. The VARIANT solver was added to DIF3D in 1995 and has seen continued development and use for the last 18 years. Because VARI3D primarily uses deprecated coding practices, rather than incorporating the perturbation and sensitivity treatments for transport within VARI3D, a new coding development was built using modern Fortran coding. The primary purpose of this manual is to describe the theory behind PERSENT (and by convenience, that of VARI3D) and discuss the input and output of PERSENT along with giving potential users an idea of how to use it. While this manuscript does describe the input and output of VARI3D, the PERSENT code is intended to be the replacement capability of VARI3D as PERSENT can generate nearly identical (if not superior) diffusion theory results. In this manuscript, the relevant aspects of generalized perturbation theory and exact perturbation theory that apply to both VARI3D and PERSENT are covered. The input and output of VARI3D is displayed by excerpting several of the example problems. Similarly, the input and output of PERSENT is displayed along with tips on how best to use the code. Note that the input and output of the inhomogeneous solver wrapped around DIF3D (DIF3D_IFS) is also discussed as it is needed to carry out some of the sensitivities in PERSENT such as reaction rate ratios. This manuscript describes several perturbation and sensitivity problems, and the results computed using PERSENT. From these sections, potential users should find that PERSENT provides not only the typical tables of numbers desired in perturbation and sensitivity analysis work, but also can visually plot the result for a more thorough understanding of the space and energy distribution (Section 5). Overall, PERSENT is observed to produce accurate reactivity worths and sensitivities for the displayed set of test problems and clearly demonstrates the need to have a transport-based sensitivity capability as evident from the thousands of percent errors observed in the 21-group hexagonal fast reactor problem (covered in Section 7). The uncertainty calculation capability is described in Section 3 and demonstrated in Section 7.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Large Plate Experiment of Chloride-induced Stress Corrosion Cracking in Spent Nuclear Fuel Storage Canisters

This report provides a description of the testing (in progress at the Savannah River National Laboratory) to evaluate the corrosion behavior of a large section of welded plate material harvested from the Sandia National Laboratories’ full-size mockup of a spent nuclear fuel (SNF) dry storage canister. The details of the establishment of this plate test, the interim corrosion results (from visual examination), and the general plan for examination of the plate in CY21 to evaluate crack growth behavior (if any) are provided. This work is intended to inform aging management programs for SNF canisters under conditions of extended dry storage. A “large plate” (approximately 51 x 46 cm with thickness 16 mm and weight about 30 kg) and containing a circumferential weldment from the mockup is the test specimen. The knowledge of the salt, temperature, humidity conditions for chloride-induced stress corrosion cracking (CISCC) including the threshold stress intensity factor, K iscc , were used to setup the large plate test in which a set of part-through-wall and through-wall electrical discharge machined (EDM) defects were positioned in the weld residual stress field of the welded plate material from the mockup canister. A marine salt solution was applied to this plate specimen with an air-brush spray, then dried, and then exposed to a sustained 71-73% RH condition at an ambient room temperature of 22 °C. The salt loading and environmental condition is expected to be aggressive to cause CISCC

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2026

Data Fusion for the Development of a Multimodal Freight Transload Facilities Dataset in the U.S.

To withstand the growing demand of commodity volume and its strain on the transportation infrastructure, it is necessary to identify the flow of commodities by route and mode. However, a national multimodal freight routing model does not exist for the U.S. The development of such model requires multiple building blocks, such as virtual representations of roadway, railway, and waterway networks, transload facilities (TFs), and access/egress links. Most of these blocks have a robust database in the U.S., except for the TFs. Here, this paper presents the fusion of dispersed and heterogeneous representations of multimodal TFs into a single, comprehensive, geospatial freight TF dataset. The TF dataset is derived from several sources, including the U.S. Army Corps of Engineers Master Docks Plus, the National Transportation Atlas Database, the Intermodal Association of North America, industry publications, and other public information. First, individual datasets were queried and reconciled. A geocoding/reverse geocoding process was applied to get the best street address and latitude/longitude location for each terminal. Then, duplicate terminals were identified by a fuzzy match algorithm based on terminal name and location, and removed. Validation was performed by visual inspection of random facilities. The main contributions of this work are: a publicly available version of the TF dataset, including facility location and multimodal transfer capability of 9,003 facilities, and an enterprise-version with the same facilities but including commodity handling capabilities. The main purpose of developing the TF dataset is to inform multimodal routing algorithms. The proposed TF dataset allows for credibly modeling the multimodal transfer of commodities within shipment routes.

Commodity Routing↗
DOE OSTI2026

Unraveling the Dynamics of Nucleosome Arrays

The organization of genomic DNA into chromatin is a fundamental determinant of genome stability, regulation, and cellular function. Nucleosomes, the basic repeating units of chromatin, assemble into higher-order structures whose organization and heterogeneity remain difficult to characterize using conventional ensemble-averaged techniques. A key need in the field is the development of experimental approaches capable of directly visualizing nucleosome assemblies and their structural variability at the single-molecule level. This LDRD Lab-Wide project focused on establishing and evaluating atomic force microscopy (AFM)–based approaches for the characterization of nucleosome assemblies. The work emphasized experimental workflows for preparing, imaging, and assessing multi-nucleosome systems, rather than isolated single nucleosomes. Through method development and exploratory measurements, the project demonstrated the feasibility of applying scanning probe microscopy to investigate chromatin-relevant assemblies and provided preliminary insight into the strengths and limitations of this approach for future quantitative studies. Results and lessons learned from this effort were disseminated to the broader scientific community through multiple national conference presentations, helping to position LLNL for continued work in chromatin and genome organization research.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRSDate not supplied

Exploring Anomalous PM 2.5 from Wildfires and Dust Storms using Data and Services at NASA GES DISC

The presence of fine particles in the atmosphere with a diameter of less than 2.5 µm, called particulate matter 2.5 (PM 2.5 ), poses a significant threat to human health as a criteria air pollutant. Fortunately, NASA's Goddard Earth Sciences Data and Information Services Center (GES DISC) provides easy access to several PM 2.5 concentration products. These datasets include the reanalysis of global hourly and monthly aerosol components including PM 2.5 data from the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA-2), as well as 3-hourly real-time ensemble forecasts of PM 2.5 from the Hazardous Air Quality Ensemble System (HAQES). The HAQES products are developed by the George Mason University Air Quality Laboratory as part of NASA's Health Air Quality Applied Science Team (HAQAST). The GES DISC is actively collaborating with scientists in the HAQAST program to further expand air quality data collections. Two new datasets are currently being archived: one is the machine learning-based global hourly PM 2.5 derived from MERRA-2; the other is the localized data (NO 2 , O 3 , and PM 2.5 ) time series derived from NASA's GEOS Composition Forecasting (GEOS-CF) system. In this presentation, we will explore the spatial patterns and long-distance transport characteristics of elevated PM 2.5 during extreme pollution events, such as the June 2023 Canadian wildfires, which are still active at the time of writing; and severe spring dust storms in 2023 over Asia. To gain comprehensive insights, we will utilize various PM 2.5 data in conjunction with satellite-observed aerosol data from TROPOspheric Monitoring Instrument (TROPOMI) on Sentinel-5P. The primary focus of this presentation will be to demonstrate effective use of data tools and services to visualize and explore extreme air pollution phenomena. Additionally, we will provide guidance on how users can download specific data of interest, facilitating further analysis and research in this critical area.

air quality↗
NASA NTRS2012

Vandenberg Air Force Base Upper Level Wind Launch Weather Constraints

The 30th Operational Support Squadron Weather Flight (30 OSSWF) provides comprehensive weather services to the space program at Vandenberg Air Force Base (VAFB) in California. One of their responsibilities is to monitor upper-level winds to ensure safe launch operations of the Minuteman III ballistic missile. The 30 OSSWF tasked the Applied Meteorology Unit (AMU) to analyze VAFB sounding data with the goal of determining the probability of violating (PoV) their upper-level thresholds for wind speed and shear constraints specific to this launch vehicle, and to develop a tool that will calculate the PoV of each constraint on the day of launch. In order to calculate the probability of exceeding each constraint, the AMU collected and analyzed historical data from VAFB. The historical sounding data were retrieved from the National Oceanic and Atmospheric Administration Earth System Research Laboratory archive for the years 1994-2011 and then stratified into four sub-seasons: January-March, April-June, July-September, and October-December. The maximum wind speed and 1000-ft shear values for each sounding in each subseason were determined. To accurately calculate the PoV, the AMU determined the theoretical distributions that best fit the maximum wind speed and maximum shear datasets. Ultimately it was discovered that the maximum wind speeds follow a Gaussian distribution while the maximum shear values follow a lognormal distribution. These results were applied when calculating the averages and standard deviations needed for the historical and real-time PoV calculations. In addition to the requirements outlined in the original task plan, the AMU also included forecast sounding data from the Rapid Refresh model. This information provides further insight for the launch weather officers (LWOs) when determining if a wind constraint violation will occur over the next few hours on day of launch. The interactive graphical user interface (GUI) for this project was developed in Microsoft Excel using Visual Basic for Applications. The GUI displays the critical sounding data easily and quickly for the LWOs on day of launch. This tool will replace the existing one used by the 30 OSSWF, assist the LWOs in determining the probability of exceeding specific wind threshold values, and help to improve the overall upper winds forecast for the launch customer.

Shafer, Jaclyn A.↗
DOE OSTI2026

Background-Oriented Schlieren Velocimetry of Helium Coolant Flow in Additively Manufactured Channels

High-pressure helium gas cooling is an attractive solution for thermal management of the fusion blanket first wall, as this coolant is chemically and neutronically inert and separable from hydrogenic species. However, due to the low thermal mass of helium, geometric optimization of these channels is required to provide sufficient cooling at manageable flow rates and pumping burdens. Increasingly, analysis and optimization of these coolant channels rely on computational fluid dynamics (CFD) simulations, and these require relevant experimental data for turbulence model validation. Toward this end, a high-pressure helium gas flow visualization system has been employed to image the flow of helium in flow channels with one-sided heating, mimicking the blanket first wall environment. Flow of helium at 4 MPa pressure and flow rates up to 68 g/s (Reynolds number 57 000) is supplied to rectangular channel test sections, with uniform heating applied to the bottom wall of the channel at heat fluxes varied between roughly 50 and 130 kW/m2. A high-speed camera is used to image index of refraction (IOR) gradients in the fluid via background-oriented schlieren (BOS), and temperature and pressure instrumentation are used to characterize thermal-hydraulic performance of each channel. Cross correlation of time-resolved BOS images is then used to calculate time-averaged 2-D helium velocity fields. Flow in additively manufactured (AM) channels is examined in this manner, including both featureless channels and those containing baffling as a heat transfer enhancement. The flow distribution seen in the featureless case differs significantly from that seen in prior simulations, whereas the flow in the baffled case shows the predicted behavior of flow forced along the heated wall. This augmented flow distribution is seen to increase the heat transfer coefficient in the baffled test section. Here, strategies are discussed for ongoing and future validation of these simulations, with the aim of model deployment for blanket cooling design and optimization.

Additive manufacturing↗
DOE OSTI2026

Strong Lens Discoveries in DESI Legacy Imaging Surveys DR10 with Two Deep Learning Architectures

Abstract We have conducted a search for strong gravitational lensing systems in the Dark Energy Spectroscopic Instrument (DESI) Legacy Imaging Surveys Data Release 10 (DR10). This paper is the fourth in a series of searches. This is the first catalog of lens candidates covering nearly the entirety of the extragalactic sky south of declination δ ≈ +32 ∘ , all observed by DECam, covering ∼14,000 deg 2 . We impose a z -band magnitude cut of <20 in AB magnitude. We deploy a residual neural network and EfficientNet as an ensemble trained on a compilation of known lensing systems and high-grade candidates as well as nonlenses in the same footprint. The predictions from these two base models are aggregated using a meta-learner. After applying our ensemble to the survey data, we exclude known candidates and systems, and use our own visual inspection portal to rank images in the top 0.01 percentile of all neural network recommendations. We have found 811 lens candidates, five of which are confirmed through Euclid Quick Data Release (Q1). These include 484 new candidates in the Legacy Surveys DR9 footprint, all parts of which have been searched for strong lenses at least once before, either by our group or others. Combining the discoveries from this work with those from the first three papers in this series (335, 1210, and 1512), we have discovered a total of 3868 new candidates in the DESI Legacy Surveys.

Inchausti, Jose Carlos [University of San Francisc↗
DOE OSTI2025

ViBRANT Applied as a Closed Loop Flux and Thermal Surrogate

Surrogate testing platforms provide a means to develop a target aspect of a larger system. Some systems target single aspects while others are more wholistic. ViBRANT (Visual Benign Reactor as Analog for Nuclear Testing) aims to be a wholistic system by representing the primary reactor behaviors through an accessible LED driven reactor core, photodiodes, thermocouples, and high-performance software interfaces being developed to the standards required for actual microreactor deployment such as MARVEL. With the ability to drive control drums enabled with full reactor capability (e.g. speed/angle/torque capability/limits for operation and clutch/spring scram capability), drive ViBRANT’s high fidelity 36 pin hexagon core to represent phenomena via LEDs, and capture the analog response of distributed photodiodes/thermocouples, this paper will show the system’s ability to operate in a closed-loop fashion and do well at matching reactor power/temperature distribution in an accessible reactor surrogate environment.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

I Can’t Read All That! Improving the Usability of Semantic Models Using Concise, Ontology-Agnostic, Building-Specific Schemas

Semantic ontologies have enabled the creation of formalized, machine-readable descriptions of heterogenous building systems by providing dictionaries of well defined concepts that can be applied to model them. Within a semantic model of a particular building, a subset of an ontology's concepts may be applied in different ways to represent a particular perspective of the building's systems. How the concepts were applied can only be understood by examining the large amount of instance data within a semantic model, which leads to usability challenges. We propose a concise, ontology-agnostic method for defining building-specific schema (b-schema) graphs that summarize the structure and content of a semantic model. This approach provides a queryable and concise representation of the model's contents, separate from the instance data within a model, that can mitigate the challenges posed by the size and complexity of semantic models in processes such as visualization, querying, validation, and the use of large language models (LLMs). We validate our approach on semantic models based on the Brick and ASHRAE S223 ontologies. Results demonstrate that b-schemas significantly reduce the complexity of visual interpretation, accelerate SPARQL queries and SHACL validation, and improve LLM-based knowledge graph question answering.

Paul, Lazlo [Lawrence Berkeley National Laboratory↗
DOE OSTI2024

Materials Characterization: A Primer for Solid Phase Processing Applications

The Pacific Northwest National Laboratory (PNNL) undertook the Materials Characterization, Prediction, and Control (MCPC) Laboratory Directed Research and Development (LDRD) Project to advance understanding of nuclear material processing and enable multifold acceleration in the development and qualification of new material systems produced via advanced manufacturing methods, such as solid phase processing, for use in national security and advanced energy applications (Smith 2021). As a two-year LDRD investment requiring focused research, the MCPC project applied only a subset of the wide range of available destructive and nondestructive characterization methods to provide data to the predictive modeling and data analytics tasks. The purpose of this report is to review a wide range of destructive and nondestructive characterization methods that are relevant in solid-phase processing (SPP) applications, but not necessarily applied in the MCPC Project as a guide to the planning of characterization activities in future research. Particular attention is given to measured characteristics that can correlate to other material characteristics, with a particular interest in nondestructive evaluation (NDE) that can be applied to samples obtained in the MCPC Project. Destructive examinations include tensile tests, optical and electron microscopy, micro-hardness, and residual stress tests. NDE tests include surface visual inspection, eddy current examination for cracks, 4-point potential drop, ultrasound, x-ray, and computed tomography.

36 MATERIALS SCIENCE↗