Search NASA⌕ Search

SEARCH · Search NASA

Results for “Attack Surface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Lee-surface heating and flow phenomena on space shuttle orbiters at large angles of attack and hypersonic speeds

The lee-surface flow phenomena on a delta-wing orbiter and a straight-wing orbiter have been investigated at angles of attack between 0 deg and 50 deg at a Mach number of 6. Limited studies of the delta-wing orbiter were conducted at a Mach number of 19. Heat-transfer data, pressure distributions, and oil-flow studies were employed to experimentally examine the nature of the surface flow and the severity of the lee-surface heating. The effects of Reynolds number on the flow field and heating were investigated. Problem areas are defined and areas for further study are recommended.

Hefner, J. N.↗
NASA NTRS1988

Control of the boundary layer separation about an airfoil by active surface heating

Application of active control to separated flow on the RC(6)-08 airfoil at high angle of attack by localized surface heating is numerically simulated by integrating the compressible two-dimensional nonlinear Navier-Stokes equations solver. Active control is simulated by local modification of the temperature boundary condition over a narrow strip on the upper surface of the airfoil. Both mean and perturbed profiles are favorably altered when excited with the same natural frequency of the shear layer by moderate surface heating for both laminar and turbulent separation. The shear layer is found to be very sensitive to localized surface heating in the vicinity of the separation point. The excitation field at the surface sufficiently altered both the local as well as the global circulation to cause a significant increase in lift and reduction in drag.

Maestrello, Lucio↗
NASA NTRS1994

Aerodynamic surface distension system for high angle of attack forebody vortex control

A deployable system is introduced for assisting flight control under certain flight conditions, such as at high angles of attack, whereby two inflatable membranes are located on the forebody portion of an aircraft on opposite sides thereof. The members form control surfaces for effecting lateral control forces if one is inflated and longitudinal control forces if both are inflated.

Zell, Peter T.↗
NASA NTRS2016

Atomic Oxygen Erosion Yield Dependence Upon Texture Development in Polymers

The atomic oxygen erosion yield (volume of a polymer that is lost due to oxidation per incident atom) of polymers is typically assumed to be reasonably constant with increasing fluence. However polymers containing ash or inorganic pigments, tend to have erosion yields that decrease with fluence due to an increasing presence of protective particles on the polymer surface. This paper investigates two additional possible causes for erosion yields of polymers that are dependent upon atomic oxygen. These are the development of surface texture which can cause the erosion yield to change with fluence due to changes in the aspect ratio of the surface texture that develops and polymer specific atomic oxygen interaction parameters. The surface texture development under directed hyperthermal attack produces higher aspect ratio surface texture than isotropic thermal energy atomic oxygen attack. The fluence dependence of erosion yields is documented for low Kapton H (DuPont, Wilmington, DE) effective fluences for a variety of polymers under directed hyperthermal and isotropic thermal energy attack.

oxygen atoms↗
NASA NTRS1975

Lee surface flow phenomena over Space Shuttle at large angles of attack at M infinity = 6

An investigation was conducted regarding the surface heat transfer on the leeward side of the Space Shuttle, taking into account different free stream Reynolds numbers and angles of attack. Another investigation was concerned with the peak heating due to boundary layer transition and flow separation in the case of different Space Shuttle configurations. Criteria for vortex generation on the leeward flow were also examined along with the effect of transition on vortex generation. Attention was given to the leeward flowfield in the vortex flow region and the method of constructing an equivalent model for leeward flowfield analysis.

Zakkay, V.↗
NASA NTRS1993

Aerodynamic shape optimization using preconditioned conjugate gradient methods

In an effort to further improve upon the latest advancements made in aerodynamic shape optimization procedures, a systematic study is performed to examine several current solution methodologies as applied to various aspects of the optimization procedure. It is demonstrated that preconditioned conjugate gradient-like methodologies dramatically decrease the computational efforts required for such procedures. The design problem investigated is the shape optimization of the upper and lower surfaces of an initially symmetric (NACA-012) airfoil in inviscid transonic flow and at zero degree angle-of-attack. The complete surface shape is represented using a Bezier-Bernstein polynomial. The present optimization method then automatically obtains supercritical airfoil shapes over a variety of freestream Mach numbers. Furthermore, the best optimization strategy examined resulted in a factor of 8 decrease in computational time as well as a factor of 4 decrease in memory over the most efficient strategies in current use.

Burgreen, Greg W.↗
NASA NTRS1988

An application of active surface heating for augmenting lift and reducing drag of an airfoil

Application of active control to separated flow on the RC(6)-08 airfoil at high angle of attack by localized surface heating is numerically simulated by integrating the compressible 2-D nonlinear Navier-Stokes equation solver. Active control is simulated by local modification of the temperature boundary condition over a narrow strip of the upper surface of the airfoil. Both mean and perturbed profiles are favorably altered when excited with the same natural frequency of the shear layer by moderate surface heating for both laminar and turbulent separation. The shear layer is found to be very sensitive to localized surface heating in the vicinity of the separation point. The excitation field at the surface sufficiently altered both the local as well as the global circulation to cause a significant increase in lift and reduction in drag.

Maestrello, Lucio↗
NASA NTRS1990

An approximate method for calculating three-dimensional inviscid hypersonic flow fields

An approximate solution technique was developed for 3-D inviscid, hypersonic flows. The method employs Maslen's explicit pressure equation in addition to the assumption of approximate stream surfaces in the shock layer. This approximation represents a simplification to Maslen's asymmetric method. The present method presents a tractable procedure for computing the inviscid flow over 3-D surfaces at angle of attack. The solution procedure involves iteratively changing the shock shape in the subsonic-transonic region until the correct body shape is obtained. Beyond this region, the shock surface is determined using a marching procedure. Results are presented for a spherically blunted cone, paraboloid, and elliptic cone at angle of attack. The calculated surface pressures are compared with experimental data and finite difference solutions of the Euler equations. Shock shapes and profiles of pressure are also examined. Comparisons indicate the method adequately predicts shock layer properties on blunt bodies in hypersonic flow. The speed of the calculations makes the procedure attractive for engineering design applications.

Riley, Christopher J.↗
NASA NTRS1972

Calculation of laminar heat transfer to the windward surfaces of straight wing shuttle vehicles at high angle of attack and with yaw

Calculations of laminar heat transfer to windward wing and body surfaces of a straight wing MSC orbiter have been made at high angles of attack and with yaw. The predictions of heat transfer made by swept cylinder theory generally agree with measurements in areas free of external flow interference. An optimum elliptic cross section was then determined using swept cylinder theory for an aerodynamically heated windward body surface in radiation equilibrium.

Pappas, C. C.↗
NASA NTRS1948

Experimental Pressure Distribution on Fuselage Nose and Pilot Canopy of Supersonic Airplane at Mach Number 1.90

An investigation of the pressure distribution on the fuselage nose and the pilot canopy of a supersonic airplane model has been conducted at a Mach number of 1.90 over a wide range of angles of attack and yaw. Boundary layer separation apparently occurred from the upper surface at angles of attack above 24 degrees and from the lower surface at minus 15 degrees. No separation from the sides of the fuselage was evident at yaw angles up to 12 degrees.

Wyatt, DeMarquis D.↗
NASA NTRS1999

Transonic Dynamics Tunnel Force and Pressure Data Acquired on the HSR Rigid Semispan Model

This report describes the aerodynamic data acquired on the High Speed Research Rigid Semispan Model (HSR-RSM) during NASA Langley Transonic Dynamics Tunnel (TDT) Test 520 conducted from 18 March to 4 April, 1996. The purpose of this test was to assess the aerodynamic character of a rigid high speed civil transport wing. The wing was fitted with a single trailing edge control surface which was both steadily deflected and oscillated during the test to investigate the response of the aerodynamic data to steady and unsteady control motion. Angle-of-attack and control surface deflection polars at subsonic, transonic and low-supersonic Mach numbers were obtained in the tunnel?s heavy gas configuration. Unsteady pressure and steady loads data were acquired on the wing, while steady pressures were measured on the fuselage. These data were reduced using a variety of methods, programs and computer systems. The reduced data was ultimately compiled onto a CD-ROM volume which was distributed to HSR industry team members in July, 1996. This report documents the methods used to acquire and reduce the data, and provides an assessment of the quality, repeatability, and overall character of the aerodynamic data measured during this test.

Schuster, David M.↗
NASA NTRS1988

A flow visualization study of the leading edge separation bubble on a NACA 0012 airfoil with simulated glaze ice

As a part of an ongoing research in aircraft icing, the leading edge separation bubble on a NACA 0012 model with a 5 min simulated glaze ice was investigated. The flow visualization methods using oil, tuft, splitter plate, smoke, and liquid crystals were employed to get reattachment line data for the leading edge separation bubble on both surfaces of the airfoil. On the upper surface, the separation bubble was found to grow larger with increasing angles of attack and reduce in size with decreasing angle of attack. On the lower surface, the bubble was found to grow larger with increasing negative angles of attack and reduce in size with increasing angles of attack. The separated flow fails to reattach beyond 6° for the upper surface and -5° for the loser surface. Their results of this study compared well with those of other experiments and computational results.

Aircraft icing↗
NASA NTRS1988

Surface flow visualization of separated flows on the forebody of an F-18 aircraft and wind-tunnel model

A method of in-flight surface flow visualization similar to wind-tunnel-model oil flows is described for cases where photo-chase planes or onboard photography are not practical. This method, used on an F-18 aircraft in flight at high angles of attack, clearly showed surface flow streamlines in the fuselage forebody. Vortex separation and reattachment lines were identified with this method and documented using postflight photography. Surface flow angles measured at the 90 and 270 degrees meridians show excellent agreement with the wind tunnel data for a pointed tangent ogive with an aspect ratio of 3.5. The separation and reattachment line locations were qualitatively similar to the F-18 wind-tunnel-model oil flows but neither the laminar separation bubble nor the boundary-layer transition on the wind tunnel model were evident in the flight surface flows. The separation and reattachment line locations were in fair agreement with the wind tunnel data for the 3.5 ogive. The elliptical forebody shape of the F-18 caused the primary separation lines to move toward the leeward meridian. Little effect of angle of attack on the separation locations was noted for the range reported.

Fisher, David F.↗
NASA NTRS1973

Experimental investigation of hypersonic buzz on a high cross-range shuttle configuration.

An experimental study confirming the existence of hypersonic buzz in the separated region of a space shuttle's downward deflected control surface is described. Wind tunnel tests in helium on a 1:100 scale model of a shuttle type configuration at M = 17.5 clearly demonstrated the occurrence of large scale pressure oscillations throughout a substantial range of angles of attack and control surface deflections. Measurements of surface pressure fluctuations along with high speed schlieren photography served to delineate the boundaries of the phenomenon and to identify the physical parameters necessary for the onset of a buzz condition. Prominent spectral energy peaks were also observed in the surface pressures that could be directly correlated with the instability. These conditions were found to be strongly dependent on the presence of multiple shock interactions and the position of these interactions relative to the location of a reattaching shear layer.

Goldman, R. L.↗
NASA NTRS2016

Modeling the Exo-Brake and the Development of Strategies for De-Orbit Drag Modulation

The Exo-Brake is a simple, non-propulsive means of de-orbiting small payloads from orbital platforms such as the International Space Station (ISS). Two de-orbiting experiments with fixed surface area Exo-Brakes have been successfully conducted in the last two years on the TechEdSat-3 and -4 nano-satellite missions. The development of the free molecular flow aerodynamic data-base is presented in terms of angle of attack, projected front surface area variation, and altitude. Altitudes are considered ranging from the 400km ISS jettison altitude to 90km. Trajectory tools are then used to predict de-orbit/entry corridors with the inclusion of the key atmospheric and geomagnetic uncertainties. Control system strategies are discussed which will be applied to the next two planned TechEdSat-5 and -6 nano-satellite missions - thus increasing the targeting accuracy at the Von Karman altitude through the proposed drag modulation technique.

Exo-Brake↗
NASA NTRS1986

A comparison of computed and experimental surface pressure and heating on 70 deg sphere cones at angles of attack to 20 deg

A method for handling the flow fields around 70 deg spherical cones at angles of attack up to 20 deg is described. Surface pressure and heating results are compared with existing wind tunnel data. Computed surface pressures are found to be in excellent agreement with experimental data, while the surface heating from approximate and finite difference forms of the boundary layer equations are in good agreement with the data. The effect of bluntness ratio on surface pressures and heating is very small. Body corner radius, while not having a significant impact on body aerodynamics, produced large changes in surface pressure and heating distribution.

Weilmuenster, K. J.↗