Search NASA⌕ Search

SEARCH · Search NASA

Results for “B2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Spectroscopic Redshift of the Gamma-Ray Blazar B2 1215+30 from Lyα Emission

We report on Cosmic Origin Spectrograph observations of the gamma-ray bright blazar B2 1215+30, collected in 2015 November. These observations allow for the confirmation of the source redshift from the detection of a Lyα emission feature at λ ∼ 1374 Å. The emission feature places the source at a redshift of z = 0.1305 ± 0.003, confirming the source’s ground-based spectral measurement. The gamma-ray emission of the source is discussed in the context of the source distance, required for the accurate reconstruction of the intrinsic gamma-ray emission taking the absorption by the extragalactic background light into account. The source distance is found to be low enough that the previously reported detection of an exceptional flaring event from B2 1215+30 in 2014 cannot be used to investigate opacity-specific spectral and variability characteristics introduced by possible ultra-high-energy cosmic-ray propagation.

79 ASTRONOMY AND ASTROPHYSICS↗

The {sup 12}C/{sup 13}C Ratio in Sgr B2(N): Constraints for Galactic Chemical Evolution and Isotopic Chemistry

A study has been conducted of {sup 12}C/{sup 13}C ratios in five complex molecules in the Galactic center. H{sub 2}CS, CH{sub 3}CCH, NH{sub 2}CHO, CH{sub 2}CHCN, and CH{sub 3}CH{sub 2}CN and their {sup 13}C-substituted species have been observed in numerous transitions at 1, 2, and 3 mm, acquired in a spectral-line survey of Sgr B2(N), conducted with the telescopes of the Arizona Radio Observatory (ARO). Between 22 and 54 individual, unblended lines for the {sup 12}C species and 2–54 for {sup 13}C-substituted analogs were modeled in a global radiative transfer analysis. All five molecules were found to consistently exhibit two velocity components near V {sub LSR} ∼ 64 and 73 km s{sup −1}, with column densities ranging from N {sub tot} ∼ 3 × 10{sup 14} − 4 × 10{sup 17} cm{sup −2} and ∼2 × 10{sup 13} − 1 × 10{sup 17} cm{sup −2} for the {sup 12}C and {sup 13}C species, respectively. Based on 14 different isotopic combinations, ratios were obtained in the range {sup 12}C/{sup 13}C = 15 ± 5 to 33 ± 13, with an average value of 24 ± 7, based on comparison of column densities. These measurements better anchor the {sup 12}C/{sup 13}C ratio at the Galactic center, and suggest a slightly revised isotope gradient of {sup 12}C/{sup 13}C = 5.21(0.52) D {sub GC} + 22.6(3.3). As indicated by the column densities, no preferential {sup 13}C enrichment was found on the differing carbon sites of CH{sub 3}CCH, CH{sub 2}CHCN, and CH{sub 3}CH{sub 2}CN. Because of the elevated temperatures in Sgr B2(N), {sup 13}C isotopic substitution is effectively “scrambled,” diminishing chemical fractionation effects. The resulting ratios thus reflect stellar nucleosynthesis and Galactic chemical evolution, as is likely the case for most warm clouds.

79 ASTRONOMY AND ASTROPHYSICS↗

The Changing-look Blazar B2 1420+32

Abstract Blazars are active galactic nuclei with their relativistic jets pointing toward the observer, comprising two major subclasses, flat-spectrum radio quasars (FSRQs) and BL Lac objects. We present multiwavelength photometric and spectroscopic monitoring observations of the blazar B2 1420+32, focusing on its outbursts in 2018–2020. Multiepoch spectra show that the blazar exhibited large-scale spectral variability in both its continuum and line emission, accompanied by dramatic gamma-ray and optical variability by factors of up to 40 and 15, respectively, on week to month timescales. Over the last decade, the gamma-ray and optical fluxes increased by factors of 1500 and 100, respectively. B2 1420+32 was an FSRQ with broad emission lines in 1995. Following a series of flares starting in 2018, it transitioned between BL Lac and FSRQ states multiple times, with the emergence of a strong Fe pseudocontinuum. Two spectra also contain components that can be modeled as single-temperature blackbodies of 12,000 and 5200 K. Such a collection of “changing-look” features has never been observed previously in a blazar. We measure gamma-ray–optical and interband optical lags implying emission-region separations of less than 800 and 130 gravitational radii, respectively. Since most emission-line flux variations, except the Fe continuum, are within a factor of 2–3, the transitions between FSRQ and BL Lac classifications are mainly caused by the continuum variability. The large Fe continuum flux increase suggests the occurrence of dust sublimation releasing more Fe ions in the central engine and an energy transfer from the relativistic jet to subrelativistic emission components.

Astronomy & Astrophysics↗

On the infrared emission from SGR B2

Results are reported for 2.2-micron observations of a 3.5 by 4 arcmin region centered on Sgr B2. More than 30 discrete sources stronger than 10 magnitudes (60 mJy) were found, but no extended emission stronger than about 80 mJy was seen with the 15-arcsec beam. All the emission objects are shown to have colors typical of stars reddened by 10 to 35 magnitudes, and it is postulated that they are all unrelated field stars at unknown distances along the line of sight to the H II region. It is concluded that there is no evidence for a statistical excess of 2.2-micron sources in the direction of Sgr B2. A previously reported observation of extended emission in the same region is attributed to source confusion and the limited number of scans made.

Becklin, E. E.↗

Detection of HC/O-18//plus/ in Sagittarius B2

Line emission at 85.1 GHz attributed to the J equals 1-0 rotational transition of the formyl ion HC(O-18)(plus) has been detected in Sgr B2 (OH). The double isotopic ratio (O-16/O-18)/(C-12/C-13) in the formyl ion in Sgr B2 is estimated to be in the range 5-10, hence within a factor 2 of the terrestrial value of 5.5. This determination implies that the C-13/C-12 ratio near the galactic center does not differ greatly from that in local molecular clouds.

Guelin, M.↗

The kinetic temperature and density of the Sagittarius B2 molecular cloud from observations of methyl cyanide

Observations of the K components of the CH3CN J = 4-to-3 rotational transition at 73.6 GHz, the 6-to-5 transition at 110.4 GHz, and the 7-to-6 transition at 128.7 GHz, yield a mean kinetic temperature value of 85 + or - 10 K and a mean H2 density of 110,000 + or - 50,000/cu cm for the central 2.0 arcmin of the Sgr B2 molecular cloud. Within the K = zero-to-4 ladders of CH3CN in Sgr B2, the populations of the radiatively coupled J levels are relaxed and exhibit a rotational temperature of about 16 K, which is similar to that of several linear molecules.

Cummins, S. E.↗

The B2 aluminides as alternative materials

The potential of the B2 aluminides as structural material alternatives for the strategic element containing superalloys currently used in gas turbine engines is being explored with emphasis on the equiatomic Fe and Ni aluminides. Although Co is a strategic material, the equiatomic Co aluminide is also being studied to gain a more complete understanding of these fourth period intermetallics. Research focuses on initial processing techniques such as ingot melting, power metallurgy, and rapid solidification with and without additional thermomechanical processing; high temperature deformation - primarily compressive creep; compositional effects within the binary B2 aluminides; third-element alloying addition effects on high temperature strength and oxidation resistance, and near room temperature ductility as influenced by processing, alloying, and grain size. Various programs now underway are reviewed and some highlights of research results are presented.

Stephens, J. R.↗

The B2 aluminides as alternative materials

The potential of the B2 aluminides as structural material alternatives for the strategic element containing superalloys currently used in gas turbine engines is being explored with emphasis on the equiatomic Fe and Ni aluminides. Although Co is a strategic material, the equiatomic Co aluminide is also being studied to gain a more complete understanding of these fourth period intermetallics. Research focuses on initial processing techniques such as ingot melting, power metallurgy, and rapid solidification with and without additional thermomechanical processing; high temperature deformation primarily compressive creep; compositional effects within the binary B2 aluminides; third-element alloying addition effects on high temperature strength and oxidation resistance, and near room temperature ductility as influenced by processing, alloying, and grain size. Various programs now underway are reviewed and some highlights of research results are presented.

Stephens, J. R.↗

Room temperature tensile ductility in polycrystalline B2 Ni-30Al-20Fe

A room-temperature tensile elongation of about 2.5 percent, where the only slip vector observed was the 100, has been determined for a double-extruded B2 Ni-30Al-20Fe alloy consisting of recrystallized equiaxed grains about 25 microns in diameter; these results suggest that 100-slip does not preclude limited ductility in polycrystalline B2 alloys in tension at low temperatures. A suppression of ordering through resort to rapid solidification, in other words, is not necessary for ductility, since the cast and as-extruded alloy presently examined is ordered.

Guha, Sumit↗

Mobile satellite system propagation measurements at L-band using Marecs-B2

A mobile satellite system (MSS) propagation experiment at 1.5 GHz was performed near the east coast of the United States in central Maryland during December 1987 using the Marecs-B2 satellite as a transmitter platform. A receiving system in a vehicle measured signal fades caused by shadowing and multipath from roadside trees and utility poles. The propagation degradations were characterized for a system of three roads previously examined using a helicopter as the transmitter platform. The objectives of the Marecs-B2 MSS tests were to: (1) establish cumulative fade distributions for the particular satellite geometry for both rural and suburban roads; (2) validate the consistency of previous roadside tree measurements which employed a helicopter as the transmitter platform for the same system of roads; (3) obtain an additional set of fade levels at a lower angle hitherto not measured in central Maryland; and (4) combine the satellite-acquired data set with previous helicopter results and establish an analytic, empirically derived function describing the cumulative fade distributions for a family of path angles. An analysis of the satellite data has demonstrated the successful achievement of these objectives.

Vogel, Wolfhard J.↗

High angular resolution far-infrared observations of Sagittarius B2

High-angular-resolution FIR observations of the continuum emission from the Sagittarius B2 molecular cloud core are reported. Evidence is found for a significantly spatially extended component of the FIR emission at 50- and 100-micron wavelength, which has an angular extent of 1 x 2 arcmin. Its approximate spatial coincidence with a low-level extended component of the radio free-free emission and with the portion of the SGR B2 core having densities not less than 10 exp 5 cu cm derived from molecular observations suggests that the ionizing radiation from the massive stars in the compact sources is diffusing through a region with a beam-averaged visual extinction not less than a few hundred mag. It is inferred that the gas and the dust in the central portion of the cloud surrounding the compact radio free-free/FIR sources are highly clumped.

Goldsmith, Paul F.↗

Analysis of the Defect Structure of B2 Feal Alloys

The Bozzolo, Ferrante and Smith (BFS) method for alloys is applied to the study of the defect structure of B2 FeAI alloys. First-principles Linear Muffin Tin Orbital calculations are used to determine the input parameters to the BFS method used in this work. The calculations successfully determine the phase field of the B2 structure, as well as the dependence with composition of the lattice parameter. Finally, the method is used to perform 'static' simulations where instead of determining the ground state configuration of the alloy with a certain concentration of vacancies, a large number of candidate ordered structures are studied and compared, in order to determine not only the lowest energy configurations but other possible metastable states as well. The results provide a description of the defect structure consistent with available experimental data. The simplicity of the BFS method also allows for a simple explanation of some of the essential features found in the concentration dependence of the heat of formation, lattice parameter and the defect structure.

Bozzolo, Guillermo↗

Are clouds collapsing at the 2' north position of Sagittarius B2?

The 3 mm lines of HCO2+ and HNCO have been observed toward Sgr B2. Besides the well-known "principal cloud" and an extended envelope, we find another gas cloud 2' north of Sgr B2(M). This 2' north (2' N) cloud which may be located behind the principal cloud, has a total mass of approximately 10(5) Msolar and a diameter of approximately 7 pc. HCO2+ and HNCO exist mainly at 2' north, and their column densities are about 2.2 x 10(14) and 2.3 x 10(15) cm-2, respectively. The fractional abundances of these species relative to molecular hydrogen appear to be enhanced by at least a factor of 10 compared to the principal cloud. We have also identified redshifted and blueshifted high-velocity components which move toward the 2' N position with projected velocities of +/- 30 km s-1. These components are located symmetrically around 2' N, along the Galactic plane, and have diameters of about 4-5 pc and masses of approximately 1 x 10(4) Msolar. The flow energies are large enough to initiate new star formation in the 2' N region on the free-fall timescale of 10(5) yr. This large-scale collapsing motion may cause a strong shock in the 2' N cloud and result in the enhancement of HCO2+ and HNCO.

NASA Discipline Exobiology↗

Detection of abundant ethane and methane, along with carbon monoxide and water, in comet C/1996 B2 Hyakutake: evidence for interstellar origin

The saturated hydrocarbons ethane (C2H6) and methane (CH4) along with carbon monoxide (CO) and water (H2O) were detected in comet C/1996 B2 Hyakutake with the use of high-resolution infrared spectroscopy at the NASA Infrared Telescope Facility on Mauna Kea, Hawaii. The inferred production rates of molecular gases from the icy, cometary nucleus (in molecules per second) are 6.4 X 10(26) for C2H6, 1.2 X 10(27) for CH4, 9.8 X 10(27) for CO, and 1.7 X 10(29) for H2O. An abundance of C2H6 comparable to that of CH4 implies that ices in C/1996 B2 Hyakutake did not originate in a thermochemically equilibrated region of the solar nebula. The abundances are consistent with a kinetically controlled production process, but production of C2H6 by gas-phase ion molecule reactions in the natal cloud core is energetically forbidden. The high C2H6/CH4 ratio is consistent with production of C2H6 in icy grain mantles in the natal cloud, either by photolysis of CH4-rich ice or by hydrogen-addition reactions to acetylene condensed from the gas phase.

Non-programmatic↗

Performing a Large-Scale Modal Test on the B2 Stand Crane at NASA's Stennis Space Center

A modal test of NASA's Space Launch System (SLS) Core Stage is scheduled to occur at the Stennis Space Center B2 test stand. A derrick crane with a 150-ft long boom, located at the top of the stand, will be used to suspend the Core Stage in order to achieve defined boundary conditions. During this suspended modal test, it is expected that dynamic coupling will occur between the crane and the Core Stage. Therefore, a separate modal test was performed on the B2 crane itself, in order to evaluate the varying dynamic characteristics and correlate math models of the crane. Performing a modal test on such a massive structure was challenging and required creative test setup and procedures, including implementing both AC and DC accelerometers, and performing both classical hammer and operational modal analysis. This paper describes the logistics required to perform this large-scale test, as well as details of the test setup, the modal test methods used, and an overview and application of the results.

Stasiunas, Eric C.↗

Performing a Large-Scale Modal Test on the B2 Stand Crane at NASA's Stennis Space Center

A modal test of NASA’s Space Launch System (SLS) Core Stage is scheduled to occur prior to propulsion system verification testing at the Stennis Space Center B2 test stand. A derrick crane with a 180-ft long boom, located at the top of the stand, will be used to suspend the Core Stage in order to achieve defined boundary conditions. During this suspended modal test, it is expected that dynamic coupling will occur between the crane and the Core Stage. Therefore, a separate modal test was performed on the B2 crane itself, in order to evaluate the varying dynamic characteristics and correlate math models of the crane. Performing a modal test on such a massive structure was challenging and required creative test setup and procedures, including implementing both AC and DC accelerometers, and performing both classical hammer and operational modal analysis. This paper describes the logistics required to perform this large-scale test, as well as details of the test setup, the modal test methods used, and an overview of the results.

Stasiunas, Eric C.↗

Existence of a Second A3 Phase in B2 Epitaxial Co(2)Cr(1-X)Fe(X)Al Thin Films

The Heusler alloy Co{sub 2}Cr{sub 1-x}Fe{sub x}Al, predicted to be half-metallic for low x, has recently shown relatively large giant and tunnel magnetoresistances in thin film structures. However, the saturation magnetic moment and spin polarization for low x films has been found to fall significantly short of the theoretical half-metallic values. Using transmission electron microscopy and X-ray diffraction, we have observed the presence of a second hcp A3 phase in B2 epitaxial thin films of Heusler alloy Co{sub 2}Cr{sub 1-x}Fe{sub x}Al with x < 1. Assuming this second phase to have a lower magnetic moment and spin polarization than the B2 phase explains the reduction in magnetic moments and spin polarizations observed in this class of compounds.

36 MATERIALS SCIENCE↗

Materials Data on B2(CN2)3 by Materials Project

B2(CN2)3 crystallizes in the monoclinic C2/c space group. The structure is three-dimensional. there are two inequivalent B3+ sites. In the first B3+ site, B3+ is bonded in a trigonal planar geometry to three N3- atoms. There are a spread of B–N bond distances ranging from 1.44–1.49 Å. In the second B3+ site, B3+ is bonded in a trigonal planar geometry to three N3- atoms. There are a spread of B–N bond distances ranging from 1.40–1.45 Å. There are three inequivalent C4+ sites. In the first C4+ site, C4+ is bonded in a distorted see-saw-like geometry to four N3- atoms. There are a spread of C–N bond distances ranging from 1.46–1.54 Å. In the second C4+ site, C4+ is bonded to four N3- atoms to form corner-sharing CN4 tetrahedra. There are a spread of C–N bond distances ranging from 1.45–1.61 Å. In the third C4+ site, C4+ is bonded to four N3- atoms to form corner-sharing CN4 tetrahedra. There are a spread of C–N bond distances ranging from 1.45–1.62 Å. There are six inequivalent N3- sites. In the first N3- site, N3- is bonded in a trigonal planar geometry to one B3+ and two C4+ atoms. In the second N3- site, N3- is bonded in a distorted trigonal non-coplanar geometry to one B3+ and two C4+ atoms. In the third N3- site, N3- is bonded in a distorted trigonal planar geometry to one B3+ and two C4+ atoms. In the fourth N3- site, N3- is bonded in a distorted trigonal planar geometry to one B3+ and two equivalent C4+ atoms. In the fifth N3- site, N3- is bonded in a distorted trigonal planar geometry to one B3+ and two C4+ atoms. In the sixth N3- site, N3- is bonded in a distorted trigonal planar geometry to one B3+ and two equivalent C4+ atoms.

36 MATERIALS SCIENCE↗