Search NASA⌕ Search

SEARCH · Search NASA

Results for “BASIC INTERACTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

C-SIDE: The control-structure interaction demonstration experiment

The Control-Structure Interaction Demonstration Experiment (C-SIDE) is sponsored by the Electro-Optics and Cryogenics Division of Ball Aerospace Systems Group. Our objective is to demonstrate methods of solution to structure control problems utilizing currently available hardware in a system that is an extension of our corporate experience. The larger space structures with which Ball has been associated are the SEASAT radar antenna, Shuttle Imaging Radar (SIR) -A, -B and -C antennas and the Radarsat spacecraft. The motivation for the C-SIDE configuration is to show that integration of active figure control in the radar's system-level design can relieve antenna mechanical design constraints. This presentation is primarily an introduction to the C-SIDE testbed. Its physical and functional layouts, and major components are described. The sensor is of special interest as it enables direct surface figure measurements from a remote location. The Remote Attitude Measurement System (RAMS) makes high-rate, unobtrusive measurements of many locations, several of which may be collocated easily with actuators. The control processor is a 386/25 executing a reduced order model-based algorithm with provision for residual mode filters to compensate for structure interaction. The actuators for the ground demonstration are non-contacting, linear force devices. Results presented illustrate some basic characteristics of control-structure interaction with this hardware. The testbed will be used for evaluation of current technologies and for research in several areas. A brief indication of the evolution of the C-SIDE is given at the conclusion.

Mohl, James B.↗

Material interactions with the Low Earth Orbital (LEO) environment: Accurate reaction rate measurements

To resolve uncertainties in estimated LEO atomic oxygen fluence and provide reaction product composition data for comparison to data obtained in ground-based simulation laboratories, a flight experiment has been proposed for the space shuttle which utilizes an ion-neutral mass spectrometer to obtain in-situ ambient density measurements and identify reaction products from modeled polymers exposed to the atomic oxygen environment. An overview of this experiment is presented and the methodology of calibrating the flight mass spectrometer in a neutral beam facility prior to its use on the space shuttle is established. The experiment, designated EOIM-3 (Evaluation of Oxygen Interactions with Materials, third series), will provide a reliable materials interaction data base for future spacecraft design and will furnish insight into the basic chemical mechanisms leading to atomic oxygen interactions with surfaces.

Visentine, James T.↗

Interesting Scientific Questions Regarding Interactions in the Gas-aerosol-cloud System

The growth of human population and their use of land, food and energy resources affect the Earth's atmosphere, biosphere and oceans in a complex manner. Many important questions in earth sciences today deal with issues regarding the impact of human activities on our immediate and future environment, ranging in scope from local (i.e. air pollution) to global (i.e. global warming) scale problems. Because the mass of the Earth's atmosphere is negligible compare to that found in the oceans and the biosphere, the atmosphere can respond quickly to natural and/or manmade perturbations. For example, seasonal 'ozone hole' formation in the Antarctic is a result of manmade CFC emissions in just the last 40 years. Also, the observed rise in global temperatures (known as global warming) is linked to a rapid increase in carbon dioxide and other greenhouse gas concentrations (emitted primarily by combustion processes) over the last century. The Earth's atmosphere is composed of a mixture of gases, aerosol and cloud particles. Natural and anthropogenic emissions of gases and aerosols affect the composition of the Earth's atmosphere. Changes in the chemical and physical makeup of the atmosphere can influence how the Earth will interact with the incoming solar radiation and the outgoing infrared radiation and vise versa. While, some perturbations are short-lived, others are long-lived and can affect the Earth's global climate and chemistry in many decades to come, In order to be able to separate the natural effects from anthropogenic ones, it is essential that we understand the basic physics and chemistry of interactions in the gas-aerosol-cloud system in the Earth's atmosphere. The important physics and chemistry that takes place in the coupled gas-aerosol-cloud system as it relates to aircraft observations are discussed.

Tabazadeh, Azadeh↗

Observations of moon-plasma interactions by orbital and surface experiments

Extensive magnetic field observations together with crucial plasma measurements by the Explorer 35 lunar orbiter and Apollo surface and orbital experiments have established the basic nature of the moon's interaction with the solar wind and interplanetary magnetic field. The effective absorption of the incident solar wind by the moon creates a plasma void or cavity behind the moon. The cavity-associated magnetic signature is characterized by an enhancement in magnetic field magnitude B within the cavity as compared with the mean level of B in the surrounding interplanetary plasma and dips or decreases in B near the cavity boundaries with the solar wind. Apollo particle and field measurements on the lunar surface have provided evidence of a regional interaction of the highly conducting solar wind with lunar remanent magnetic fields. Simultaneous plasma and magnetic field data, from the spectrometer and the lunar surface magnetometer at the Apollo 12 location, show the compression of the local remanent field by large solar wind and magnetosheath plasma dynamic pressures.

Schubert, G.↗

Radiative interactions in molecular gases under local and nonlocal thermodynamic equilibrium conditions

Basic formulations, analyses, and numerical procedures are presented to investigate radiative heat interactions in diatomic and polyatomic gases under local and nonlocal thermodynamic equilibrium conditions. Essential governing equations are presented for both gray and nongray gases. Information is provided on absorption models, relaxation times, and transfer equations. Radiative flux equations are developed which are applicable under local and nonlocal thermodynamic equilibrium conditions. The problem is solved for fully developed laminar incompressible flows between two parallel plates under the boundary condition of a uniform surface heat flux. For specific applications, three diatomic and three polyatomic gases are considered. The results are obtained numerically by employing the method of variation of parameters. The results are compared under local and nonlocal thermodynamic equilibrium conditions at different temperature and pressure conditions. Both gray and nongray studies are conducted extensively for all molecular gases considered. The particular gases selected for this investigation are CO, NO, OH, CO2, H2O, and CH4. The temperature and pressure range considered are 300-2000 K and 0.1-10 atmosphere, respectively. In general, results demonstrate that the gray gas approximation overestimates the effect of radiative interaction for all conditions. The conditions of NLTE, however, result in underestimation of radiative interactions. The method developed for this study can be extended to solve complex problems of radiative heat transfer involving nonequilibrium phenomena.

Tiwari, S. N.↗

Heuristic control of the Utah/MIT dextrous robot hand

Basic hand grips and sensor interactions that a dextrous robot hand will need as part of the operation of an EVA Retriever are analyzed. What is to be done with a dextrous robot hand is examined along with how such a complex machine might be controlled. It was assumed throughout that an anthropomorphic robot hand should perform tasks just as a human would; i.e., the most efficient approach to developing control strategies for the hand would be to model actual hand actions and do the same tasks in the same ways. Therefore, basic hand grips that human hands perform, as well as hand grip action were analyzed. It was also important to examine what is termed sensor fusion. This is the integration of various disparate sensor feedback paths. These feedback paths can be spatially and temporally separated, as well as, of different sensor types. Neural networks are seen as a means of integrating these varied sensor inputs and types. Basic heuristics of hand actions and grips were developed. These heuristics offer promise of control dextrous robot hands in a more natural and efficient way.

Bass, Andrew H., Jr.↗

Paired and interacting galaxies: Conference summary

The author gives a summary of the conference proceedings. The conference began with the presentation of the basic data sets on pairs, groups, and interacting galaxies with the latter being further discussed with respect to both global properties and properties of the galactic nuclei. Then followed the theory, modelling and interpretation using analytic techniques, simulations and general modelling for spirals and ellipticals, starbursts and active galactic nuclei. Before the conference the author wrote down the three questions concerning pairs, groups and interacting galaxies that he hoped would be answered at the meeting: (1) How do they form, including the role of initial conditions, the importance of subclustering, the evolution of groups to compact groups, and the fate of compact groups; (2) How do they evolve, including issues such as relevant timescales, the role of halos and the problem of overmerging, the triggering and enhancement of star formation and activity in the galactic nuclei, and the relative importance of dwarf versus giant encounters; and (3) Are they important, including the frequency of pairs and interactions, whether merging and interactions are very important aspects of the life of a normal galaxy at formation, during its evolution, in forming bars, shells, rings, bulges, etc., and in the formation and evolution of active galaxies? Where possible he focuses on these three central issues in the summary.

Norman, Colin A.↗

Solar electric propulsion system technology

Achievements in the solar electric propulsion system technology program (SEPST 3) are reported and certain propulsion system-spacecraft interaction problems are discussed. The basic solar electric propulsion system concept and elements are reviewed. Hardware is discussed only briefly, relying on detailed fabrication or assembly descriptions reported elsewhere. Emphasis is placed on recent performance data, which are presented to show the relationship between spacecraft requirements and present technology.

Masek, T. D.↗

Use of LEED, Auger emission spectroscopy and field ion microscopy in microstructural studies

Surface research tools such as LEED, Auger emission spectroscopy analysis, and field ion microscopy are discussed. Examples of their use in studying adhesion, friction, wear, and lubrication presented. These tools have provided considerable insight into the basic nature of solid surface interactions. The transfer of metals from one surface to another at the atomic level has been observed and studied with each of these devices. The field ion microscope has been used to study polymer-metal interactions and Auger analysis to study the mechanism of polymer adhesion to metals. LEED and Auger analysis have identified surface segregation of alloying elements and indicated the influence of these elements in metallic adhesion. LEED and Auger analysis have assisted in adsorption studies in determining the structural arrangement and quantity of adsorbed species present in making an understanding of the influence of these species on adhesion possible. These devices are assisting in the furtherance of understanding of the fundamental mechanism involved in the adhesion, friction, wear, and lubrication processes.

Ferrante, J.↗

Processor for the UNIVAC 1100 series

MBASIC, advanced version of BASIC, is high-level interactive computer language designed to minimize time required for user to program task for computer execution. Language usually results in shorter and simpler programs that are easier to write and understand.

Bracher, F. H.↗

Gyrotron: A high-frequency microwave amplifier

A proposed microwave amplifier mechanism for future generations of millimeter high power uplinks to spacecraft and planetary radar transmitters is introduced. Basic electron-electromagnetic field interaction theory for RF power gain is explained. The starting point for general analytical methods leading to detailed design results is presented.

Kupiszewski, A.↗

National meeting to review IPAD status and goals

A joint NASA/industry project called Integrated Programs for Aerospace-vehicle Design (IPAD) is described, which has the goal of raising aerospace-industry productivity through the application of computers to integrate company-wide management of engineering data. Basically a general-purpose interactive computing system developed to support engineering design processes, the IPAD design is composed of three major software components: the executive, data management, and geometry and graphics software. Results of IPAD activities include a comprehensive description of a future representative aerospace vehicle design process and its interface to manufacturing, and requirements and preliminary design of a future IPAD software system to integrate engineering activities of an aerospace company having several products under simultaneous development.

Fulton, R. E.↗

An evaluation of the Interactive Software Invocation System (ISIS) for software development applications

The Interactive Software Invocation System (ISIS), which allows a user to build, modify, control, and process a total flight software system without direct communications with the host computer, is described. This interactive data management system provides the user with a file manager, text editor, a tool invoker, and an Interactive Programming Language (IPL). The basic file design of ISIS is a five level hierarchical structure. The file manager controls this hierarchical file structure and permits the user to create, to save, to access, and to purge pages of information. The text editor is used to manipulate pages of text to be modified and the tool invoker allows the user to communicate with the host computer through a RUN file created by the user. The IPL is based on PASCAL and contains most of the statements found in a high-level programming language. In order to evaluate the effectiveness of the system as applied to a flight project, the collection of software components required to support the Annular Suspension and Pointing System (ASPS) flight project were integrated using ISIS. The ASPS software system and its integration into ISIS is described.

Noland, M. S.↗

A summary of jet-impingement studies at McDonnell Douglas Research Laboratories

It has been the primary objective of the considered studies to determine and describe, through calculation, measurement, and visualization of the flowfields, the basic character of isolated and interacting impinging jets. The secondary objective has been to provide computed and experimental flow properties which can be used in the development and verification of empirically based prediction methodologies for complete aircraft configurations. The studies have resulted in the solution of the Reynolds-averaged Navier-Stokes and Jones-Launder turbulence model equations for two- and three-dimensional configurations and in the acquisition of an extensive data base and flow-visualization photographs for these configurations.

Bower, W. W.↗

A 20 GHz, 75 watt, helix TWT for space communications

A space-qualified, helix-type traveling wave tube is being developed for satellite communication systems in the frequency band of 17.7 to 21.2 GHz. The design approach stresses very high efficiency operation, but with very low distortion. The tube provides multi-mode operation, permitting CW saturated power output levels of 75, 40, and 7.5 W. Operation is also anticipated at 5 dB below these saturation levels to achieve the required low distortion levels. Advanced construction features include a five-stage depressed collector, a diamond supported helix slow-wave circuit, and a type M dispenser cathode. High reliability and long life (10 yr) are objectives of the tube design. Preliminary test results on early developmental models of this tube are very encouraging. An output power of 75 to 90 W has been achieved over the full bandwidth with about 40 dB of saturated gain. More importantly, the basic electronic efficiency of the interaction process has been increased from about 7.5-11 percent by the use of the diamond helix support compared to earlier tubes using BeO support rods. This effort is supported by NASA Lewis Research Center and is aimed toward application in the NASA Advanced Communications Satellite Technology Program.

Heney, J. F.↗

Plasma-gas interactions studies in a hybrid plume plasma rocket

Plasma-gas interaction was investigated and the basic mechanisms for energy and particle transport. The solution approach assumes cylindrical geometry and includes a multiplicity of atomic reactions, and the presence of a strong magnetic field is described. The principal reactions are electron and ion impact ionization, and charge exchange between hot ions and cold neutrals. Radial particle and energy transport is mainly by diffusion. A modified Bohm diffusion model for plasma in the core of the plume, and classical neutral particle diffusion in the cooler regions of the flow are presented. Neutrals are allowed to free stream in the low density regions, where the collision mean-free-path becomes comparable, or even larger than the characteristic dimensions of the system.

Chang, F. R.↗

Plasma structures in Comet Halley

Large-scale plasma phenomena based on results of spacecraft probing of comets Halley and Giacobini-Zinner and on International Halley Watch are discussed. The data show that: the basic mechanism for the comets' interaction with the solar wind (Alfven, 1957) is correct; that the turn-on and turn-off of plasma activity follows the description of Mendis and Flammer (1984); and that disconnection events are associated with sector boundary crossings and an essential element in the morphology of developed plasma tails (Niedner and Brandt, 1978).

Brandt, John C.↗