SEARCH · Search NASA
Results for “BATTERY CELL MODELING”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Local Polarization Dynamics in Ferroelectric Materials
Ferroelectrics and multiferroics have recently emerged as perspective materials for information technology and data storage applications. The combination of extremely narrow domain wall width and the capability to manipulate polarization by electric field opens the pathway towards ultrahigh (>10 TBit/in2) storage densities and small (sub-10 nm) feature sizes. The coupling between polarization and chemical and transport properties enables applications in ferroelectric lithography and electroresistive devices. The progress in these applications, as well as fundamental studies of polarization dynamics and the role of defects and disorder on domain nucleation and wall motion, requires the capability to probe these effects on the nanometer scale. In this review, we summarize recent progress in applications of Piezoresponse Force Microscopy (PFM) for imaging, manipulation, and spectroscopy of ferroelectric switching processes. We briefly introduce the principles and relevant instrumental aspects of PFM, with special emphasis on resolution and information limits. The local imaging studies of domain dynamics, including local switching and relaxation accessed through imaging experiments, and spectroscopic studies of polarization switching, are discussed in detail. Finally, we briefly review the recent progress on photochemical processes on ferroelectric surfaces, the role of surface adsorbates, and imaging and switching in liquids. Beyond classical applications, probing local bias-induced transition dynamics by PFM opens the pathway to studies of the influence of a single defect on electrochemical and solid state processes, thus providing model systems for batteries, fuel cells, and supercapacitor applications.
A Comparison of Online Model-Based Anomaly Detection Methods for a Lithium-Ion Battery Cell
Explore the source record for details and available documents.
A Comparison of Online Model-Based Anomaly Detection Methods for a Lithium-Ion Battery Cell
Explore the source record for details and available documents.
Modelling a nickel-cadmium battery as a heterogeneous device
A common failure mode for nickel-cadmium batteries involves a nonuniform degradation of the performance of individual cells. This behavior is manifested as a divergence in voltage during cyclic operation. An empirically based performance model is presented which simulates a battery composed of heterogeneous cells. Battery performance is studied as a function of the distribution of cell performance characteristics. The technique has successfully predicted cell voltage divergence behavior observed during cycle life testing. It is noted that this work enhances understanding of life-test results and may improve life-test design and data analysis.
Secondary battery management system
A method and system for managing a battery system. The method including receiving at least one measured characteristic of the battery over a pre-defined time horizon from the at least one sensor, receiving at least one estimated characteristic of the battery from a electrochemical-based battery model based on differential algebraic equations, determining a cost function of a Moving Horizon Estimation based on the at least one measured characteristic and the at least one estimated characteristic, updating the electrochemical-based battery model based on the cost function, estimating at least one state of the at least one battery cell by applying the electrochemical-based battery model, and regulating at least one of charging or discharging of the battery based on the estimation of the at least one state of the at least one battery cell.
Secondary battery management system
A method and system for managing a battery system. The method including receiving at least one measured characteristic of the battery over a pre-defined time horizon from the at least one sensor, receiving at least one estimated characteristic of the battery from a electrochemical-based battery model based on differential algebraic equations, determining a cost function of a Moving Horizon Estimation based on the at least one measured characteristic and the at least one estimated characteristic, updating the electrochemical-based battery model based on the cost function, estimating at least one state of the at least one battery cell by applying the electrochemical-based battery model, and regulating at least one of charging or discharging of the battery based on the estimation of the at least one state of the at least one battery cell.
Multi-Node Thermal System Model for Lithium-Ion Battery Packs: Preprint
Temperature is one of the main factors that controls the degradation in lithium ion batteries. Accurate knowledge and control of cell temperatures in a pack helps the battery management system (BMS) to maximize cell utilization and ensure pack safety and service life. In a pack with arrays of cells, a cells temperature is not only affected by its own thermal characteristics but also by its neighbors, the cooling system and pack configuration, which increase the noise level and the complexity of cell temperatures prediction. This work proposes to model lithium ion packs thermal behavior using a multi-node thermal network model, which predicts the cell temperatures by zones. The model was parametrized and validated using commercial lithium-ion battery packs. neighbors, the cooling system and pack configuration, which increase the noise level and the complexity of cell temperatures prediction. This work proposes to model lithium ion packs thermal behavior using a multi-node thermal network model, which predicts the cell temperatures by zones. The model was parametrized and validated using commercial lithium-ion battery packs.
Computer Aided Battery Engineering Consortium
A multi-national lab collaborative team was assembled that includes experts from academia and industry to enhance recently developed Computer-Aided Battery Engineering for Electric Drive Vehicles (CAEBAT)-II battery crush modeling tools and to develop microstructure models for electrode design - both computationally efficient. Task 1. The new Multi-Scale Multi-Domain model framework (GH-MSMD) provides 100x to 1,000x computation speed-up in battery electrochemical/thermal simulation while retaining modularity of particles and electrode-, cell-, and pack-level domains. The increased speed enables direct use of the full model in parameter identification. Task 2. Mechanical-electrochemical-thermal (MECT) models for mechanical abuse simulation were simultaneously coupled, enabling simultaneous modeling of electrochemical reactions during the short circuit, when necessary. The interactions between mechanical failure and battery cell performance were studied, and the flexibility of the model for various batteries structures and loading conditions was improved. Model validation is ongoing to compare with test data from Sandia National Laboratories. The ABDT tool was established in ANSYS. Task 3. Microstructural modeling was conducted to enhance next-generation electrode designs. This 3- year project will validate models for a variety of electrodes, complementing Advanced Battery Research programs. Prototype tools have been developed for electrochemical simulation and geometric reconstruction.
Optimization of the lithium/thionyl chloride battery
The progress which has been made in modeling the lithium/thionyl chloride cell over the past year and proposed research for the coming year are discussed. A one-dimensional mathematical model for a lithium/thionyl chloride cell has been developed and used to investigate methods of improving cell performance. During the course of the work a problem was detected with the banded solver being used. It was replaced with one more reliable. Future work may take one of two directions. The one-dimensional model could be augmented to include additional features and to investigate in more detail the cell temperature behavior, or a simplified two-dimensional model for the spirally wound design of this battery could be developed to investigate the heat flow within the cell.
Active Reconditioning of Retired Lithium-ion Battery Packs from Electric Vehicles for Second Life Applications
Utilizing the remaining capacity in retired lithium-ion (Li-ion) batteries from electric vehicles (EVs) for second-life applications has shown economic and environmental benefits. However, achieving homogeneity among the capacities of cells before their second life is critical to exploit the benefits. This article proposes a new active reconditioning approach with the potential to make short-term reconditioning of batteries before second life feasible. A control objective map determines each cell's state-of-charge (SOC) operating window based on its capacity relative to other cells. The SOC reference translates into distinct differential currents through the cells, wherein the higher-capacity cells undergo more frequent and deep charge and discharge cycles than their lower-capacity counterparts. The proposed solution achieves capacity homogeneity within the battery pack with low reconditioning time and minimal fade in the overall pack capacity. The feasibility of the reconditioning approach under varying load and environmental conditions is assessed through simulations, encompassing factors such as the number of cycles per day, depth-of-discharge, battery pack temperature, and cell resting time at different SOCs. Furthermore, the simulation model employs a battery pack with sixteen series-connected 75 Ah Kokam lithium nickel manganese cobalt oxide (NMC) cells with a 3.6% initial capacity imbalance. A reconditioning time of 1.3 months is achieved with a final capacity imbalance of 0.1% and an overall capacity fade of 0.005%, thereby confirming the viability of the reconditioning process. Moreover, experimental validation using eight retired battery cells from a Nissan Leaf demonstrates a substantial decrease in the capacity imbalance of cells from 9.4% to 2.15% within 78 days, effectively affirming the efficacy of the proposed reconditioning scheme.
Battery Cell Thermal Runaway Calorimeter
We currently have several methods for determining total energy output of an 18650 lithium ion cell. We do not, however, have a good method for determining the fraction of energy that dissipates via conduction through the cell can vs. the energy that is released in the form of ejecta. Knowledge of this fraction informs the design of our models, battery packs, and storage devices; (a) No longer need to assume cell stays together in modeling (b) Increase efficiency of TR mitigation (c) Shave off excess protection.
Development of a high fidelity CFD model for solvent evaporation and transport in porous structure during battery electrode drying
An efficient battery manufacturing process is the key to the mass production of Electric Vehicles (EV), in which drying is one of the most energy-intensive steps significantly influencing the battery cell performance. An accurate 3D CFD model for drying is essential for predicting the drying mechanism and optimizing its parameters. By optimizing the drying process, it is possible to reduce energy consumption and cost during battery manufacturing, minimize binder loading and maximize active material loading to achieve superior electrochemical performances and facilitate wider and faster public adoption of EV. This project aims to optimize the drying process during electrode manufacturing by leveraging high-fidelity, porous electrode simulations for solvent evaporation. By optimizing this process, we seek to reduce energy consumption during battery manufacturing, while minimizing binder loading and maximizing active material loading, with the overall goal of enhancing electrical vehicle performance.
Electrolyte Management Considerations in Modern Nickel Hydrogen and Nickel Cadmium Cell and Battery Designs
This paper reviews three general areas where the potassium ion content can impact the performance and life of nickel hydrogen and nickel cadmium cells. Sample calculations of the concentration or volume changes that can take place within operating cells are presented. With the aid of an accurate model of an operating cell or battery, the impact of changes of potassium ion content within a potential cell design can be estimated. All three of these areas are directly related to the volume tolerance and pore size engineering aspects of the components used in the cell or battery design.
II.B.3 Battery Safety Testing (SNL)
Objectives are: Serve as an independent abuse test laboratory for DOE and USABC; Abuse testing in accordance with the USABC abuse testing manual; Successful testing of all deliverables from developers under USABC contracts; Revise the USABC abuse testing manual; Test the propensity towards propagation of cell failure through multiple cell batteries; Provide mechanical testing support to develop and validate mechanical models for EV batteries; and, Evaluate the effect of cell age on abuse response.
Designing Safe Lithium-Ion Battery Packs Using Thermal Abuse Models (Presentation)
NREL and NASA developed a thermal-electrical model that resolves PTC and cell behavior under external shorting, now being used to evaluate safety margins of battery packs for spacesuit applications.
BATPAC--VERSION 5.0
Argonne National Laboratory has worked on electrochemical energy storage for several decades. The focus on lithium-ion chemistries started in the early 1990s, developing new materials, synthesis methods, and performance characterizations. Sponsored by the U.S. Department of Energy, Energy Efficiency and Renewable Energy, Vehicle Technologies Office (DOE-EERE-VTO), Argonne has led with many advances. The experimental activities were complemented with multi-scale modeling that ranged from the atomic to the system (manufacturing processes and automobiles) level. The Battery Performance and Cost (BatPaC) model is a calculation method based on Microsoft¿ Office Excel spreadsheets that have been developed at Argonne for estimating the performance and manufacturing cost of lithium-ion batteries for electric-drive vehicles including hybrid-electrics (HEV), plug-in hybrids (PHEV) and pure electrics. The effort is being funded by the Vehicle Technology Office (VTO), which is part of the Energy Efficiency and Renewable Energy (EERE) office of the U.S. Department of Energy (USDOE). BatPaC was first developed in 2007, was subsequently peer-reviewed, and it has served Argonne researchers and the greater battery community in studying the impact of material properties on performance at the pack level. With further developments, the model now allows the design of cells and battery packs for automotive applications, to meet performance requirements (power, energy, recharge time), and estimates the cost of manufacturing the designed batteries. Since the cost depends on the materials he design, and the manufacturing process, this bottom-up model/tool enables the user to study their effects. Designed or the lithium-ion cell and battery researcher, BatPaC helps answer many questions by being 1.Transparent in the assumptions made and the method of calculation 2.Capable of designing a battery specifically for the requirements of an application 3.Constrained by the physical limitations that govern battery performance 4. A bottom-up calculation approach to account for every cost factors. BatPaC predicts the impact of promising materials (and their properties) on the performance metrics relevant for the different applications. Researchers can use the specific capacities and the half-cell voltages of a particular set of electrode materials to calculate the mass and volume of a cell to develop a model incorporating the properties of all the other materials in the cell and the design of the cell enclosure. These calculations not only reveal the impact of an improved material but also enable researchers to calculate the material properties that would be needed to meet the performance criteria of a full battery pack. With this information, researchers can provide he battery industry with realistic expectations that will help it more successfully advance novel battery technologies an Applications.