Atomistic Simulation Informs Interface Engineering of Nanoscale LiCoO 2
Not Available
36 MATERIALS SCIENCE↗
SEARCH · Search NASA
Results for “BLAS”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Interstitialcy-mediated transport in Hematite
Defect transport mechanisms drive the performance of materials in both energy storage and energy generating systems. Iron oxide systems are of particular interest with use cases in both realms. Previous studies of a-Fe2O3 (hematite) determined that the primary point defects at elevated temperature are O vacancies and Fe interstitials, and these defects determine transport rates at temperatures >850°C. However, in advanced nuclear reactor designs, operating temperatures will range between 400-800°C. In this study, we utilize isotopic tracers and the nanoscale resolution of atom probe tomography to determine diffusivities at lower temperatures relevant to nuclear energy generating systems. Supported by a density functional theory informed rate theory model, we find a change from vacancy to interstitialcy-mediated transport < 800°C in the anion lattice.
Yano, Kayla H.↗
Critical Assessment of the Thermodynamics of Vacancy Formation in Fe 2 O 3 Using Hybrid Density Functional Theory
Fe 2 O 3 hematite is a technologically important material with applications in energy storage as well as being the key phase formed in the rust of iron-based materials. Despite this central importance, there is much that is still unknown regarding the properties of defects in Fe 2 O 3 and consequently oxide growth. In this work, using screened hybrid density functional theory (HSE06), we consider the thermodynamics of vacancies in Fe 2 O 3 , considering the effects of ionic and electronic chemical potentials on both iron and oxygen vacancy formation. We find that, in the oxygen-rich limit, iron vacancies are easier to form, though the difference in formation energy between the two vacancies is only about 1 eV. In contrast, in the Fe-rich limit, oxygen vacancies have an extremely low formation energy, only 0.07 eV at mid-gap, and would spontaneously form as the Fermi level is reduced, while Fe vacancies require over 5 eV to form. Consistent with experiment, this indicates that Fe 2 O 3 is relatively easily reduced but not oxidized. However, the theoretical picture is very different when considering other exchange–correlation functionals (GGA + U or SCAN), emphasizing the critical role of the exchange–correlation functional in describing this system accurately.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Correction to “Critical Assessment of the Thermodynamics of Vacancy Formation in Fe 2 O 3 Using Hybrid Density Functional Theory”
After publication, the authors discovered two errors in the DFT data reported which partially affect Figures 2, 7, and 8. Additionally, while these errors do not affect the main findings of this work, we wish to make sure these issues do not complicate future comparisons and so we have added this correction for publication.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Radiation Enhanced Anion Diffusion in Chromia
Cr 2 O 3 is a ubiquitous passivating film on alloys that is vital to their stability and performance in hostile environments. In this study, we directly observe and measure how anion transport through the oxide is affected by 400 keV Ar 2+ ion irradiation as a function of temperature (30–500 °C) and dose (0.33–2.00 dpa) in single-crystal Cr 2 O 3 films using embedded 18 O isotopic tracers and atom probe tomography. Diffusion coefficients are experimentally determined and compared to a chemical rate theory model. Experimental and theoretical results are broadly in agreement, showing anion diffusion increases by at least 4–5 orders of magnitude upon irradiation with a weak dependence on temperature and a stronger dose-driven sink-strength dependence. These results reveal that radiation could significantly reduce the protectiveness of Cr 2 O 3 films when passivity relies upon limited anion diffusivity, even at relatively modest levels of irradiation and low temperatures.
38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
Density Functional Theory Study of Local Environment Effects on Oxygen Vacancy Properties in Magnetite
Not Available
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Density Functional Theory Study of Iron–Oxygen Divacancies in Magnetite (Fe 3 O 4 ) and Hematite (Fe 2 O 3 )
Density functional theory (DFT) calculations are employed to investigate the formation energies, charge redistribution, and binding energies of iron–oxygen divacancies in magnetite (Fe 3 O 4 ) and hematite (Fe 2 O 3 ). For magnetite, we focus on the low-temperature phase to explore variations with local environments. Building on previous DFT calculations of the variations in formation energies for oxygen vacancies with local charge and spin order in magnetite, we extend this analysis to include octahedral iron vacancies before analyzing the iron–oxygen divacancies. We also assessed the relative stability of iron–oxygen divacancies by comparing their formation energies with those of individual vacancies. Our findings reveal a significant energetic driving force for the formation of divacancy clusters, particularly in magnetite, where divacancies in the +1 charge state exhibit formation energies comparable to those of neutral iron vacancies under oxidizing conditions. In hematite, the results indicate a strong tendency for oxygen vacancies to bind to iron vacancies. These results highlight the significance of iron–oxygen vacancy complexes in the transport properties of iron oxides, with particular relevance to diffusion mechanisms under irradiation conditions.
36 MATERIALS SCIENCE↗
Adatom-Driven Oxygen Intermixing during the Deposition of Oxide Thin Films by Molecular Beam Epitaxy
Thin film deposition from the vapor phase is a complex process involving adatom adsorption, movement, and incorporation into the growing film. While simulations have been able to capture key aspects of these processes to reproduce film morphology, these models typically ignore any subsurface diffusion that occurs. The results of these diffusion and intermixing processes are often observed experimentally, but cannot be explained by invoking bulk lattice diffusion at the deposition temperature. In this work, we present quantitative experimental data that reveals anion and cation intermixing over long length scales during the deposition of epitaxial Fe 2 O 3 and Cr 2 O 3 films and heterostructures by oxygen-plasma-assisted molecular beam epitaxy. We track this diffusion by incorporating well-defined tracer layers containing 18 O and/or 57 Fe, and measure their redistribution on the nanometer scale with atom probe tomography. Molecular dynamics simulations suggest potential intermixing events, which are then examined via nudged elastic band calculations. These reveal that adatoms on the film surface act to “pull up” subsurface O and Fe. Subsequent ring-like rotation mechanisms involving both adatom and subsurface anions then facilitate their mixing. A simple model incorporating these events qualitatively agrees with the experimental intermixing results. In addition to film deposition, these intermixing mechanisms may to be operant during other surface-mediated processes such as heterogeneous catalysis and corrosion.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Band-edge Engineering to Eliminate Radiation-Induced Defect States in Perovskite Scintillators
Under radiative environments such as extended hard X- or γ-rays, degradation of scintillation performance is often due to irradiation-induced defects. To overcome the effect of deleterious defects, novel design mitigation strategies are needed to identify and design more resilient materials. The potential for band-edge engineering to eliminate the effect of radiation-induced defect states in rare-earth-doped perovskite scintillators is explored, taking Ce 3+ -doped LuAlO 3 as a model material system, using density functional theory (DFT)-based DFT + U and hybrid Heyd–Scuseria–Ernzerhof (HSE) calculations. Furthermore, from spin-polarized hybrid HSE calculations, the Ce 3+ activator ground-state 4f position is determined to be 2.81 eV above the valence band maximum in LuAlO 3 . Except for the oxygen vacancies which have a deep level inside the band gap, all other radiation-induced defects in LuAlO 3 have shallow defect states or are outside the band gap, that is, relatively far away from either the 5d 1 or the 4f Ce 3+ levels. Finally, we examine the role of Ga doping at the Al site and found that LuGaO 3 has a band gap that is more than 2 eV smaller than that of LuAlO 3 . Specifically, the lowered conduction band edge envelopes the defect gap states, eliminating their potential impact on scintillation performance and providing direct theoretical evidence for how band-edge engineering could be applied to rare-earth-doped perovskite scintillators.
36 MATERIALS SCIENCE↗
Chemical manipulation of hydrogen induced high p-type and n-type conductivity in Ga 2 O 3
Advancement of optoelectronic and high-power devices is tied to the development of wide band gap materials with excellent transport properties. However, bipolar doping (n-type and p-type doping) and realizing high carrier density while maintaining good mobility have been big challenges in wide band gap materials. Here P-type and n-type conductivity was introduced in β-Ga 2 O 3 , an ultra-wide band gap oxide, by controlling hydrogen incorporation in the lattice without further doping. Hydrogen induced a 9-order of magnitude increase of n-type conductivity with donor ionization energy of 20 meV and resistivity of 10 -4 Ω.cm. The conductivity was switched to p-type with acceptor ionization energy of 42 meV by altering hydrogen incorporation in the lattice. Density functional theory calculations were used to examine hydrogen location in the Ga 2 O 3 lattice and identified a new donor type as the source of this remarkable n-type conductivity. Positron annihilation spectroscopy measurements confirm this finding and the interpretation of the experimental results. This work illustrates a new approach that allows a tunable and reversible way of modifying the conductivity of semiconductors and it is expected to have profound implications on semiconductor field. At the same time, it demonstrates for the first time p-type and remarkable n-type conductivity in Ga 2 O 3 which should usher in the development of Ga 2 O 3 devices and advance optoelectronics and high-power devices.
36 MATERIALS SCIENCE↗
Prediction of structure and cation ordering in an ordered normal-inverse double spinel
Abstract Spinels represent an important class of technologically relevant materials, used in diverse applications ranging from dielectrics, sensors and energy materials. While solid solutions combining two “single spinels” have been explored in a number of past studies, no ordered “double” spinels have been reported. Based on our first principles computations, here we predict the existence of such a double spinel compound MgAlGaO 4 , formed by an equimolar mixing of MgAl 2 O 4 normal and MgGa 2 O 4 inverse spinels. After studying the details of its atomic and electronic structure, we use a cluster expansion based effective Hamiltonian approach with Monte Carlo simulations to study the thermodynamic behavior and cation distribution as a function of temperature. Our simulations provide strong evidence for short-ranged cation order in the double spinel structure, even at significantly elevated temperatures. Finally, an attempt was made to synthesize the predicted double spinel compound. Energy Dispersive X-ray Spectrometry and X-ray diffraction Rietveld refinements were performed to characterize the single-phase chemical composition and local configurational environments, which showed a favorable agreement with the theoretical predictions. These findings suggest that a much larger number of compounds can potentially be realized within this chemical space, opening new avenues for the design of spinel-structured materials with tailored functionality.
36 MATERIALS SCIENCE↗
Band gap predictions of double perovskite oxides using machine learning
Abstract The compositional and structural variety inherent to oxide perovskites spawn wide-ranging applications. In perovskites, the band gap E g , a key material parameter for these applications, can be optimally controlled by varying the composition. Here, we implement a hierarchical screening process in which two cross-validated and predictive machine learning models for band gap classification and regression, trained using exhaustive datasets that span 68 elements of the periodic table, are applied sequentially. The classification model separates wide band gap materials, with E g ≥ 0.5 eV, from materials which have zero or relatively small band gaps, namely E g < 0.5 eV, and the second regression model quantitatively predicts the gap value of the wide band gap compounds. The study down-selects 13,589 cubic oxide perovskite compositions that are predicted to be experimentally formable, thermodynamically stable, and have a wide band gap. Of these, a subset of 310 compounds, which are predicted to be stable and formable with a confidence greater than 90%, are identified for further investigation. Our models are methodically analyzed via performance metrics and inter-dependence of model features to gain physical insight into the band gap prediction problem. Design maps to identify the variation of band gap with substitution of different elements are also presented.
36 MATERIALS SCIENCE↗
Spatially-varying inversion near grain boundaries in MgAl 2 O 4 spinel
Atomistic simulations reveal increased cation inversion at grain boundaries in spinel. As the grain size is reduced, the apparent level of inversion in the material will increase as the grain boundaries become an increasing fraction of the material.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
High-throughput investigation of the formation of double spinels
Spinel compounds, with the general chemical formula AB 2 O 4 , are a wide class of materials, where A and B can be a variety of cations, providing this structure with a great deal of functional flexibility and giving rise to its considerable scientific interest. Recently, a spinel with the general formula ABB'O 4 has been predicted, increasing the possible usability of the spinels due to the higher cation diversity in the so-called double spinel structure. In this study, we use density functional theory calculations to predict if double spinels can be formed between experimentally synthesized normal and inverse single spinels. Our computations reveal that 49 double spinels have negative mixing enthalpies and are thus thermodynamically stable, with most of the stable compounds being formed from one of two distinct cation orderings. We show that the 17 different cations that form the different double spinels have a preferred site, tetrahedral or octahedral, except for Mn, Fe and Co which can occupy both sites interchangeably. We also study the relation between mixing enthalpies and cation-specific properties, as well as ways to classify the double spinels into distinct types and spinel groups depending on the cation ordering and cation oxidation states, respectively. Furthermore, by applying the Sure Independence Screening and Sparsifying Operator (SISSO) approach on the coordination-dependent ionic radii of the elemental constituents, we show that an interplay of local strain and electrostatic dominated terms can be used to separate the double spinels into distinct structural types depending on the cation order and their oxidation states.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Accurately predicting optical properties of rare-earth, aluminate scintillators: influence of electron–hole correlation
Advanced modeling shows that electron-hole interactions play a pivotal role in the energetics of radiation-detection materials. Uncovering the nature of these quantum decay processes has implications for nuclear, space, and medical applications.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Dose rate dependent cation & anion radiation enhanced diffusion in hematite
Irradiation induced non-equilibrium point defect populations influence mass transport in oxides, which in turn affects their stability and performance in hostile environments. In this study a strong dose rate dependence is observed.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Short Range Order in Disordered Spinel and the Impact on Cation Vacancy Transport
Spinels are important complex oxides for use in radiation damage environments and resulting from the corrosion of steels. It is known that, in these environments, normal spinels exist with some concentration of antisite cation pairs known as inversion. In this work we show that even in highly disordered states characterized by high levels of inversion, spinel still shows some short range order (SRO) that manifests itself in antisite chains. The propensity to form these antisite chains is confirmed through Monte Carlo simulations which find that the length of chains which can form depend on the spinel chemistry. We also consider the effect of antisite chains on the diffusivity of cation vacancies and find the effect strongly depends on the spinel chemistry. At the extremes, chains in FeCr2O4 significantly increase vacancy transport but in MgAl2O4 chains have the inverse effect of drastically reducing vacancy mobility. The explanation of these dramatically different effects results from the assessment of the thermodynamic stability of the antisite chains and contrasting attractive/repulsive interactions of vacancies with the chains.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗