Search NASA⌕ Search

SEARCH · Search NASA

Results for “BOUNDARY VALUE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Aerosol Vertical Turbulent Mass Flux Retrievals Through Novel Remote Sensing Algorithm

Abstract Integrated measurements of aerosol, radiation, cloud, and turbulent transport in the planetary boundary layer (PBL) are essential for understanding and modeling climate and air quality. Here, we developed a new technique for the identification of convective turbulent regions and deriving the vertical distribution of aerosol turbulent mass fluxes within PBL. The algorithm uses retrievals from coherent Doppler lidars and a high spectral resolution lidar. The technique was applied to study particle mass fluxes over 2 months (November–December 2020) during the campaign conducted at the DOE Atmospheric Radiation Measurement Southern Great Plains (SGP) site in Lamont, Oklahoma. The algorithm developed here is capable of continuously deriving vertically resolved (curtains) aerosol mass fluxes. Our data analysis shows that at the site, the 30‐min averaged fluxes at 135 m above the surface were mainly positive (upward) at ∼1 μg m −2 s −1 , suggesting that the surface is the primary source of the particle mass supplied to the boundary layer at the SGP site. Analyses of the individual case studies have revealed that not all the derived fluxes can be linked to surface emissions. Both positive and negative values in a range of ±5 μg m −2 s −1 can be caused by convective thermals interacting between the residual layer and the mixed layer and by rotation of the horizontal wind with the height. Large erroneous negative fluxes can also be caused by drizzling/precipitating clouds. We anticipate that the application of the current technique will lead to a more realistic representation of aerosol mass budgets and bidirectional mixing rates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Low- n stability and plasma response to RMP in various STEP scenarios

The low-n (n is the toroidal mode number) magnetohydrodynamic (MHD) stability and plasma response are numerically investigated for various scenarios designed for STEP, that are relevant for the H-mode pedestal analysis. Control of the edge-localized modes (ELMs) with externally applied resonant magnetic perturbations (RMPs) is considered. Optimization of the ELM control coil current configuration, based on the computed plasma MHD response and well-established figures of merit validated on present-day experiments, finds reasonable robustness of a fixed coil phasing (for a given n-number) to control ELMs in all five STEP plasmas considered. Based on certain semi-empirical criteria, the required coil current to achieve ELM suppression is estimated to be about 10–20 kAt with the n = 1 or 2 RMP configuration and about 100–200 kAt for the n = 4 RMP. Systematic linear stability calculations are used to map out stability windows for the low-n kink-peeling modes, in terms of the ideal-wall location and variation of the edge safety factor q 95 with respect to the target design. The kink-peeling stability boundary is found to be generally sensitive to the q 95 variation, which has implications for achieving the quiescent H-mode regime in STEP. Full toroidal quasilinear initial-value simulations for these STEP plasmas find that generation of the edge-harmonic oscillations (EHOs) depends sensitively on the plasma scenario, the initial linear stability of the kink-peeling modes, the initial plasma toroidal flow and q 95 . In general, it is easier (more robust) to access the EHO-regime for two of the cases considered with smaller plasma volume and higher on-axis safety factor. Finally, quasilinear simulations find robust density pumpout due to applied RMPs in these STEP plasmas, but the effect on the plasma toroidal flow varies among different cases.

EHO↗
DOE OSTI2026

ARM Trajectories Data Set Value-Added Product Report

The U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s ARM Trajectories Data Set (ARMTRAJ) Value-Added Product (VAP) provides trajectory data sets initialized at ARM deployment coordinates and configured using ARM data sets. The four trajectory data sets support aerosol, cloud, and planetary boundary-layer research. Trajectory calculations use the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model informed by the European Centre for Medium-Range Weather Forecasts (ECMWF) fifth-generation atmospheric reanalysis (ERA5) data set at its highest spatial resolution (~31 km). HYSPLIT also runs at multiple initial starting locations surrounding ARM deployments (in latitude/longitude and/or vertical coordinates), facilitating an ensemble for each sample in the data sets. The ensemble mean and variability reported in ARMTRAJ improve the fidelity and provide uncertainty estimates of trajectory coordinates, thermodynamic properties, and other output fields.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Atomic-Scale Scanning of Domain Network in the Ferroelectric HfO 2 Thin Film

Ferroelectric HfO 2 -based thin films have attracted much interest in the utilization of ferroelectricity at the nanoscale for next-generation electronic devices. However, the structural origin and stabilization mechanism of the ferroelectric phase are not understood because the film is typically nanocrystalline with active yet stochastic ferroelectric domains. Here, in this study, electron microscopy is used to map the in-plane domain network structures of epitaxially grown ferroelectric Y:HfO 2 films in atomic resolution. The ferroelectricity is confirmed in free-standing Y:HfO 2 films, allowing for investigating the structural origin for their ferroelectricity by 4D-STEM, high-resolution STEM, and iDPC-STEM. At the grain boundaries of <111>-oriented Pca2 1 orthorhombic grains, a high-symmetry mixed-(R3m, Pnm2 1 ) phase is induced, exhibiting enhanced polarization due to in-plane compressive strain. Nanoscale Pca2 1 orthorhombic grains and their grain boundaries with mixed-(R3m, Pnm2 1 ) phases of higher symmetry cooperatively determine the ferroelectricity of the Y:HfO 2 film. It is also found that such ferroelectric domain networks emerge when the film thickness is beyond a finite value. Furthermore, in-plane mapping of oxygen positions overlaid on ferroelectric domains discloses that polarization is suppressed at vertical domain walls, while it is active when domains are aligned horizontally with subangstrom domain walls. In addition, randomly distributed 180° charged domain walls are confined by spacer layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Modelling of the electron cyclotron emission burst from a laboratory tokamak plasma with loss-cone maser instability

The maser instability associated with the loss-cone distribution has been widely invoked to explain the radio bursts observed in the astrophysical plasma environment, such as aurora and corona. In the laboratory plasma of a tokamak, events reminiscent of these radio bursts have also been frequently observed as an electron cyclotron emission (ECE) burst in the microwave range (~2f ce near the last closed flux surface) during transient magnetohydrodynamic events. These bursts have a short duration of ~10 μs and display a radiation spectrum corresponding to a radiation temperature T e,rad of over 30 keV while the edge thermal electron temperature T e is only in the range of 1 keV. Suprathermal electrons can be generated through magnetic reconnection, and a loss-cone distribution can be generated through open stochastic field lines in the magnetic mirror of the near-edge region of a tokamak plasma. Radiation modelling shows that a sharp distribution gradient ∂f/∂v ⊥ > 0 at the loss-cone boundary can cause a negative absorption of ECE radiation through the maser instability. The negative absorption then amplifies the radiation so that the microwave intensity is significantly stronger than the thermal value. The significant T e,rad from the simulations suggests the potential role of the loss-cone maser instability in generating the ECE burst in a tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Scale setting of SU⁡(𝑁) Yang–Mills theory, topology and large-𝑁 volume independence

We set the scale of SU⁡(𝑁) Yang-Mills theories for 𝑁 =3, 5, 8 and in the large-𝑁 limit via gradient flow, as a first step towards the computation of the large-𝑁 Λ-parameter using step scaling. We adopt twisted boundary conditions to achieve large-𝑁 volume reduction and the Parallel Tempering on Boundary Conditions algorithm to tame topological freezing. This setup allows accurate determinations of the gradient-flow scales down to lattice spacings as fine as ∼0.025 fm for all the explored values of 𝑁, a regime that has never been reached with ergodic algorithms. Moreover, we are able to precisely estimate the finite-size systematics related to topological freezing, and to show the suppression of finite-volume effects expected by virtue of large-𝑁 twisted volume reduction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Uncertainty quantification of fireball features extracted from nuclear test films using computer vision

Films from the US’s historic nuclear testing era comprise the only extensive collection of imagery depicting high-yield detonations. These films offer unique insights into the characteristics of flows occurring on scales that are difficult to replicate experimentally, and they are a valuable source of data for the validation of models used to describe nuclear detonations. In recent work, we implemented modern computer vision and machine learning techniques to extract features of the fireball following nuclear detonation. With a training dataset of fireball films, we fine-tuned a You Only Look Once 11 (YOLO11) model to detect and track the fireball. Applied to a video, the outer bounding box produced in each frame by YOLO11 is used as an input prompt to Meta’s Segment Anything Model 2 (SAM2), which is shown to accurately predict the boundary of the fireball over time with high resolution. These state-of-the-art computer vision foundation models exhibit impressive visual accuracy in their results but lack an output of values that robustly quantify uncertainty in scientific applications. In this paper, we develop procedures for uncertainty quantification of extracted fireball features. We outline the application of a parallel attention mechanism to calculate uncertainty ranges that complement and better pose model validation data. This higher quality fireball validation data may serve to improve prognostic models describing nuclear detonations in support of nuclear forensic and emergency response activities.

Khristy, Joel [ORNL] (ORCID:0000000209963060)↗
DOE OSTI2024

Data Format and Descriptions for the Alabama Carbon Storage: Data Sharing and Engagement Project

The Alabama Carbon Storage: Data Sharing and Engagement (ACS-DSE) project seeks to develop publicly accessible geologic carbon storage models and data across the southern Gulf Coastal Plain of Alabama. The public online platform developed for this project will include geologic, geophysical, infrastructure, and other relevant datasets and geologic models of the study area. Datasets, model surfaces (e.g. structural contour maps, isolith maps, porosity maps), and infrastructure data (e.g. offshore pipelines, field boundaries) will be downloadable in commonly used file formats. The anticipated primary geologic datasets are well headers, formation tops, average reservoir properties, and core analyses; these will be available as commaseparated values (CSV) text files and MS Excel workbooks. Geophysical logs will be available in Log ASCII Standard (LAS) file format. Modeled surfaces, such as structure contour maps, will be available in ArcGIS formats and text files. Infrastructure data will be available as ArcGIS shapefiles. This document provides information on the data sources and attributes of the datasets.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Size-resolved Eddy-Covariance Particle Flux Measurement during the TRACER Campaign (Final Report)

The main goal of the TRacking Aerosol Convection interactions ExpeRiment (TRACER) campaign was to study aerosol–cloud interactions during deep convection over the Houston area. This project deployed a suite of instrumentation with the aim to (1) quantify turbulent vertical particle fluxes during at DOE-ARM sites, including TRACER, (2) assess hygroscopic growth factors and hygroscopicity parameters of the material driving modal aerosol growth during new particle formation and growth events, (3) derive turbulent aerosol mass fluxes using co-located Doppler LIDAR measurements, and (4) create quality-controlled PI data products to support future research utilizing data collected during the TRACER campaign. This report summarized the main findings from the deployments at two DOE-ARM sites. Briefly, we found that new particle formation may occur aloft, in a residual layer, near the top of the boundary layer. Small grown particles appear later due to downward mixing with daytime turbulence. The species that are responsible for aerosol modal growth had hygroscopicity parameters varying between 0.05 and 0.34. These values systematically depended on the wind sector, suggesting that the chemical composition of the precursors differed. This work demonstrated that lidar retrievals of the elastic backscatter and Doppler velocity can be used to obtain surface number emissions of particles with a diameter greater than 0.53 µm. During TRACER, emission particle number fluxes peaked near ∼ 100 cm−2 s−1. Multiple quality-controlled PI data products that will support future TRACER related science were generated and made publically available.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

DECOVALEX-2023: Task D Final Report

Task D of DECOVALEX-2023 is focused on the simulation of the coupled thermal hydraulic-mechanical (THM) behaviour in the full-scale engineered barrier system (EBS). The Horonobe EBS experiment is the demonstration of the full-scale EBS in the underground research laboratory (URL) (performed by JAEA in the Horonobe URL in Japan). Task D consisted of the three steps, a preliminary step (Step 0), simulation of the laboratory tests (Step 1) and simulation of the in-situ full-scale EBS experiment (Step 2). Since the Horonobe EBS experiment demonstrates the vertical emplacement option of the EBS, the experiment gallery is also backfilled with the backfill material. Therefore, interaction between the EBS and the backfill material can also be demonstrated, such as deformation (change of density) of the buffer material. The underground water in the Horonobe URL is saline. This fact adds chemical processes to THM behaviour. For example, mechanical properties (such as swelling pressure of the buffer material and backfill material) and hydraulic properties (such as permeability of the buffer material and backfill material) change depending on the water chemistry. Task D was therefore a challenging Task focused on not only the relatively simple THM behaviour but also complex THM behaviour including chemical processes. Six research teams (BGR, CAS, JAEA, KAERI, SNL and Taipower) participated the Task D. BGR, CAS, JAEA, KAERI and Taipower research teams selected a THM approach, while the SNL research team selected a TH approach. Step 1 involved the simulation of laboratory test results and was important to check the numerical codes developed by the research teams. Step 1 was divided into four sub steps. The simulation results through the Step 1 identified the parameters for simulation of the Step 2. Basic parameters of the materials (buffer material, backfill material, rock mass, concrete, sand) were provided by JAEA. Special parameters which research team needed were identified by back analysis of Step 1. Most notably the mechanical behaviour of swelling and displacement depended on the applied model (elastic model or elastoplastic model). Parameters such as Young’s modulus were found to need smaller values than characterised in the fundamental laboratory test results (Step 1-1, 1-2) for the elastic model. Although laboratory experiments are usually simple, test results contained some error. For example, if the saturation level is 100 % or higher, it should be considered an error. This situation was presented in the Step 1-3. A possible reason is that the buffer material is a mixture of bentonite and silica sand. When a specimen is cut to measure volume or weight, sand grains will affect the measurement data. In Step 2, boundary conditions such as temperature on the surface of the simulated overpack, heater power of the electrical heaters installed in the simulated overpack, injection pressure and inflow rate of the test water, were applied. The outer boundary conditions can be selected using measured data (injection pressure and inflow rate of the test water that is controlled by the injection systems installed in the sand layer around the buffer material and in the boundary between backfill material and concrete support). Since such measured data has some noise, research teams developed their own simplified boundary conditions. Inner boundary conditions can be selected using measured data as heater power and temperature on the surface of the simulated overpack. These data also contain some noise, so research teams developed their own simplified developed boundary conditions. Task D validated various approaches thorough the simulation of the in-situ full scale EBS system including backfill of the gallery: variations in the coupling processes (THM or THC), analysis codes, and boundary conditions. Temperature distribution in the buffer material was simulated well by all research teams. This means thermal behaviour is not sensitive to the simulation approaches. Although the water content distribution on the outside of the buffer material was well simulated by all research teams, the simulation results differ from the measured values inside the buffer material (at the centre and inside, near the simulated overpack). The buffer material is made from tap water, but in the in-situ experiment, saline groundwater infiltrates the buffer material. Therefore, the selection of the hydraulic parameters of the buffer material greatly affects the simulation results of the re saturation behaviour of the buffer material. In the Horonobe EBS experiment, measured values suitable for validating the simulation results were not obtained near the simulated overpack. When simulating the pressure and deformation of the buffer material, the measurement data is easily affected by the installation conditions of the measurement sensors, so verifying the measurement data itself remains an issue. Mechanical simulation results differ depending on whether they are considered as elastic or elastoplastic phenomena. The accuracy of measured in-situ data can be assessed by detailed analysis comparing sampling specimen analysis and measured data. The Horonobe EBS experiment is scheduled to be dismantled in the future (FY2026 and 2027). This detailed dismantling investigation will finally confirm the measured data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Mg vacancy and impurity-limited MgO single crystal thermal conductivity

Magnesium oxide (MgO) exhibits one of the highest thermal conductivities among oxides and is widely used as a dielectric material and substrate in semiconductor devices, in refractory applications, and as a promising filler in thermal interface materials for electronics. Its high thermal conductivity may be sensitive to impurity and defects, yet this influence is still uncertain. Here, in this study, the impact of the common impurities, i.e., Al, Ca, Ti, V, Fe, Si, B, Nb, Zr, Na, and K, as well as Mg and O vacancies on phonon scattering and thermal conductivity of MgO is studied using a fully first-principles T-matrix framework. It is found that B, Nb, and Zr impurities, along with Mg vacancies, lead to exceptionally strong reductions in thermal conductivity. By contrast, O vacancies and other impurities have modest to minimal impacts. Leveraging the T-matrix results, we reassess the perturbative, mass-only formalism whose use is pervasive in the literature and show that neglecting bond disorder does not necessarily lead to underestimation: for all transition-metal impurities studied, bond perturbations partially cancel mass disorder, causing the traditional perturbative model to overestimate scattering. We propose a simple modified perturbative expression that incorporates both mass and bond disorder and closely reproduces the T-matrix trends. Our predicted low-temperature trends by including phonon-impurity and phonon-boundary scattering match reasonably well with experiments. This work provides an in-depth study of impurity- and vacancy-limited thermal conductivity of MgO and suggests that reported “high-purity” MgO values have likely not yet reached the intrinsic upper limit, which may be substantially higher.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Radiation Damage Mitigation in FeCrAl Alloy at Sub-Recrystallization Temperatures

Traditional defect recovery methods rely on high-temperature annealing, often exceeding 750 °C for FeCrAl. In this study, we introduce electron wind force (EWF)-assisted annealing as an alternative approach to mitigate irradiation-induced defects at significantly lower temperatures. FeCrAl samples irradiated with 5 MeV Zr 2+ ions at a dose of 10 14 cm −2 were annealed using EWF at 250 °C for 60 s. We demonstrate a remarkable transformation in the irradiated microstructure, where significant increases in kernel average misorientation (KAM) and low-angle grain boundaries (LAGBs) typically indicate heightened defect density; the use of EWF annealing reversed these effects. X-ray diffraction (XRD) confirmed these findings, showing substantial reductions in full width at half maximum (FWHM) values and a realignment of peak positions toward their original states, indicative of stress and defect recovery. To compare the effectiveness of EWF, we also conducted traditional thermal annealing at 250 °C for 7 h, which proved less effective in defect recovery as evidenced by less pronounced improvements in XRD FWHM values.

FeCrAl alloys↗
DOE OSTI2025

An Investigation of Thermal Properties of 2D Materials [Dissertation]

Studying the thermal conductivity of 2D materials is important due to the applications of 2D materials in fields such as thermal management, thermoelectricity, renewable energy, and sensors. As such, measurements of the thermal conductivity of these 2D materials become important to measure. Thermal conductivity is often difficult to measure for 2D materials due to their atomically thin nature and many experimental methods for doing so requiring contact with the sample, which can alter the thermal properties. A non-contact method for calculating the thermal conductivity of 2D materials supported on substrates in order to model the thermal conductivity of 2D materials for devices, is proposed and experimentally performed in this dissertation. The optothermal Raman technique is a useful non-contact diagnostic technique useful in determining the thermal conductivity of 2D materials. The optothermal Raman typically does not account for heat losses due to convection or radiation or substrate resistance, which are shown to be important factors to consider when developing an optothermal Raman model. Additionally, the calculation of the interfacial thermal conductance between the bottom surface of the sample and the top surface of the substrate, plays an important role in determining the final value of the thermal conductivity of a supported sample, and will yield differing results based on whether or not the conductance is calculated using an approach such as the Diffuse Mismatch Model (DMM) or calculated directly by varying the laser heating profile (usually done by changing the laser objective). This is shown to be the case for both graphene on Ni, graphene on Cu, and SnSe 2 on Cu. In addition to experimentally calculating the thermal conductivity of a 2D material with the optothermal Raman technique, the thermal conductivity of 2D materials can also be calculated using computational methods. The three-phonon method is a method which can be used to simulate phonon scattering processes and determine the thermal conductivity of semiconductors, wherein phonon scattering is the dominant mechanism which determines the thermal conductivity. The three-phonon method uses relaxation times for phonon scattering with other phonons, electrons, and other material system elements, such as isotopes or material defects, in order to create a single-mode relaxation time approximation (SMRTA), which is used to calculate the final value of the thermal conductivity. An important consideration when determining the thermal conductivity of a 2D material using this method is the device geometry, which is reflected in this work as the phonon-boundary scattering relaxation time. This inclusion is important along with the inclusion of phonon-electron scattering in accurately determining the thermal conductivity of a 2D material. In both the optothermal Raman experiments and the three-phonon method computations, strain is shown to have a demonstrable effect on the thermal conductivity of 2D materials. When a 1.1% strain was applied to the mechanical properties of SnSe, the three-phonon processes yielded a lower thermal conductivity than the no-strain case. For the optothermal Raman experiments, the strain induced in the Cu substrate and transferred to a single-layer graphene (SLG) sample yields a trend where the thermal conductivity of the SLG decreases with respect to strain applied. In the case where the interfacial thermal conductance was calculated directly, the conductance increased with respect to strain applied. This presents strain as a reliable and viable method for tuning the thermal properties of 2D materials for device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Demonstrate new plasticity models for doped UO 2 that capture dislocation mechanisms

In light water reactors, fuel vendors are investigating the use of dopants to modify the properties of UO 2 pellets, with the goal of improving pellet-cladding mechanical interactions during operation. Dopants are expected to ‘soften’ the pellets; that is, the doped pellets have higher plastic deformation than conventional UO 2 . This leads to a reduction in the severity of mechanical pellet-cladding interactions, helping to reduce the hoop strain on the cladding. By minimizing the strain exerted by the pellet on the cladding, it is anticipated that cladding performance under accident conditions can be enhanced (i.e., lowering the risk of burst during a LOCA). Dopants such as chromium (Cr) promote grain growth during pellet fabrication, leading to larger grains; therefore, understanding the link between chemistry, microstructure and mechanical deformation (enhanced creep rates) behavior of UO 2 is critical to helping operators further substantiate the benefits of doping UO 2 . Historically, the nuclear energy industry has relied on empirical models to make assessments of performance. Compared to empirical models, mechanistic physics-based models provide benefits, such as, fewer data points for validation and better extrapolation where experimental data is scarce or non-existent. In this report, Bayesian inference techniques have been applied to a previously developed lower length-scale-informed diffusional creep model. The objective is to i) infer lower-length-scale parameter distributions from available experiment and then ii) determine the uncertainties in the measurable quantity (in this case creep rates) after propagating the inferred lower length scale parameter uncertainties. The approach requires many evaluations of the model, which becomes computationally insurmountable; therefore, a neural-network model is trained to data obtained by sampling the full model over the most important parameters. This neural-network is then used in the Bayesian inference approach to determine probability distributions in the parameter values that represent the uncertainty in the model given what is known from the experiments (posterior). A significant reduction compared to conservative initial (prior) uncertainties is achieved through inference against the experimental data, demonstrating the efficacy of this approach. Furthermore, by accounting for uncertainties in the experimental conditions and sample non-stoichiometry, it is possible to resolve apparent discrepancies in experimental measurements within a self-consistent grain boundary (Coble) creep model that is sensitive to chemistry. This work has been written up and submitted to Nuclear Technology for a special issue on accelerated fuel qualification (AFQ). This uncertainty quantification (UQ) work not only improves the diffusional model, while accounting for uncertainty, but also establishes a framework which can readily be applied to the mechanistic models of dislocation deformation developed in this study. The most likely values from the Bayesian analysis are incorporated into our UO 2 diffusional creep model and a lower length scale-informed irradiation UO 2 creep mechanistic model to generate a dataset. This dataset has been provided to our INL collaborators for training an artificial neural network surrogate model, which will be implemented in the BISON fuel performance code to assess how the results differ from those currently obtained using a fully empirical model and that of using the nominal (uncalibrated) atomic scale parameters in our mechanistic model. Plastic deformation (creep and glide) in UO 2 is a complex phenomenon, governed by multiple underlying processes such as local defect concentrations, applied stresses, and microstructural characteristics. Consequently, there is a need for a meso-scale model with polycrystalline resolution capable of extrapolating to large grain sizes applicable to doped UO 2 , where data is limited and the model can help bridge the knowledge gap. By integrating atomistic data into the polycrystal LApx code, it becomes possible to predict dislocation climb and glide plasticity that simple analytical models cannot accurately represent. The application of atomic-scale data within LApx demonstrated the importance of climb and glide mechanisms in reproducing high-stress UO 2 behavior. Behaviors such as this are crucial to capture and implement in BISON, as parts of the fuel pellet can reach temperatures where glide can occur before pellet cracking. This model which captures dislocation based mechanisms for UO 2 is then used to stand up the doped model accounting for larger grain sizes. It was found that larger grain sizes can lead to enhanced deformation rates in the glide regime, and therefore can help with the pellet cladding mechanical interaction. Therefore if the fuel pellet reaches conditions (stress/temperature) where glide is active, the enhanced creep rates for larger grains in the glide regime (doped UO 2 ) can help with pellet cladding mechanical interactions. Plastic deformation in UO 2 involves multiple mechanisms, including diffusional creep, dislocation climb, and glide. This milestone contains two parts: (1) UQ of a pre-existing lower length scale informed mechanistic diffusional creep model, and (2) development of a new LApx based model for dislocation-mediated creep mechanisms in UO 2 , with application to large-grain doped UO 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Turbulence-Resolving Simulations of Hurricane Laura (2020): Insights Into Extreme Winds and Eyewall Turbulence

Extreme weather events pose significant risks to coastal and offshore energy infrastructure. In this work, we investigate the structure of mean winds and turbulence near the surface ( z < 300 m) that occurred during Hurricane Laura in 2020 on the US Gulf Coast. To this end, we perform turbulence-resolving simulations (..delta..x = 33.33 m) that encompass the entire eyewall of Hurricane Laura by introducing a novel method that we will refer to as Moving-Mesoscale to Static-LES Integrated Coupling (MOSAIC). The simulation results are validated against surface, boundary-layer, and mid-tropospheric observations. Our analysis of the extreme wind conditions near the surface indicates that the mean wind and turbulence profiles vary greatly at and near the eyewall, resulting in extreme values of mean wind speed (U > 50 m * s-1) and turbulence kinetic energy (k ~ 50 m2 * s-2) at altitudes above 50 m . To investigate in detail the nature of turbulence within the eyewall of the storm, we conduct higher-resolution simulations (..delta..x = 11.11 m) of a portion of the hurricane. We provide a comprehensive statistical description of turbulence in the eyewall region, highlighting the need to employ ..delta..x ~ 10 m grid spacing to capture the integral length-scales near the surface, second- and higher-order central moments (i.e., skewness and kurtosis), and spectral coherence in the flow accurately. These numerical simulations provide the most detailed description of mean winds and turbulent conditions within the eyewall of a historical tropical cyclone to date, illustrating how high-resolution simulations can enhance limited turbulence measurements in hurricanes and giving insight into the extreme conditions threatening offshore and coastal infrastructure.

17 WIND ENERGY↗
DOE OSTI2025

Factors influencing water quality in surface water and alluvial groundwaters downgradient of a reclaimed surface coal mine in the Powder River Basin of southeastern Montana, USA

Abstract Coal mining and reclamation can have a profound influence on hydrogeologic systems, with clear consequences for groundwater quality, yet their long-term influence on downgradient water quality over time following reclamation is less well documented. Geochemical trends were evaluated in water quality downgradient of a fully reclaimed landscape at the former Big Sky Mine in the Rosebud Creek watershed (southeastern Montana, USA), over a 3-year period (2020–2022), including bond release in 2022. Within 6 km downgradient from the reclaimed area, sulfate concentrations decreased from approximately 3500 to 1800 mg l −1 within the Miller Coulee alluvial aquifer. Major ions, δ 34 S SO4 values, and residence time tracers suggest that the observed decreases in sulfate concentration result from a combination of dilution by mixed-age inflows and incomplete transit of the high salinity plume from the mine boundary. Both bedrock and alluvial aquifers of the Rosebud Creek corridor contained contributions of millennia-old regional groundwater, which may serve to mitigate mine-derived high salinity waters. Rosebud Creek, which traverses the outflow zone of Miller Coulee in the study area, exhibited high sulfate concentrations during low flows and consistent downgradient increases in sulfate concentration. The possibility of plume dynamics in Miller Coulee suggests that the greatest water quality impacts may not yet have reached Rosebud Creek.

Keeshin, Skye I. (ORCID:0009000986449872)↗
DOE OSTI2026

Results of the second Ice Shelf–Ocean Model Intercomparison Project (ISOMIP+)

Ocean-driven basal melting of Antarctic ice shelves plays an important role in the mass loss of the Antarctic Ice Sheet. Ice shelf cavity-resolving ocean models are a valuable tool for understanding ice shelf-ocean interactions and for simulating projections of ice shelf and ocean states under future climate. Designed to assess the current state of ice shelf–ocean modelling, the second Ice Shelf–Ocean Model Intercomparison Project, ISOMIP+, consists of 12 ocean model configurations submitted with a common, idealised experimental setup. Here, we focus on the experiments Ocean0–2 (Asay-Davis et al., 2016), which are ocean models with idealised, static ice shelf geometries, but where the ocean reaches a balance with prescribed far-field ocean conditions. Different thermal transfer coefficient values (ranging from 0.011 to 0.2) are used for each model in the melting parameterisation to achieve a common, tuned melt rate since the models cover a range of types of vertical coordinates, ice–ocean boundary layer treatments, and numerical schemes. These model differences lead to spread in the resultant ocean properties, circulation, boundary-layer structure and spatial distribution of melting. We also highlight similarities between models, such as a shared linear relationship across most models between melt rate and overturning and barotropic streamfunctions during the spin-up and spin-down, demonstrating a robust relationship between melt and circulation across models and forcing conditions. The ISOMIP+ results provide a systematic comparison of ice shelf cavity-capable ocean models. However, we also demonstrate the need for realistic ice shelf–ocean model intercomparison projects (some already underway) to assess model biases and inter-model variation against sparse observations. Further research is needed to understand the differences between models and further improve our modelled representations of the ice–ocean boundary layer and ice shelf cavity circulation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Non-conformal interface-cohesive modeling with the shifted boundary method

The accurate simulation of boundary- and interface-dominated problems on complex geometries remains challenging when boundary- or interface-fitted meshes are difficult to generate, particularly for curved boundaries, polycrystalline microstructures, and dense interface networks. The Shifted Boundary Method (SBM) alleviates this meshing burden by shifting the enforcement of boundary conditions from the true boundary to a nearby surrogate boundary and recovering the effect of the true boundary through geometric correction terms, thereby enabling standard finite element spaces on non-boundary-fitted meshes. In this report, we develop a general shiftedboundary and shifted-interface framework within the open-source MOOSE framework. We first present a general SBM implementation for complex geometries on non-boundary-fitted meshes. We then adopt the Shifted Interface Method (SIM) for internal interfaces and develop a unified shifted-interface treatment in which the interface law is enforced on a surrogate interface and the effect of the true interface is recovered through shifted jumps, fluxes, and tractions. This perspective brings scalar thermal-contact and vector-valued cohesive-zone mechanics into a single framework, the latter realized as the Shifted Cohesive Zone Method (SCZM) and coupled with history-dependent constitutive models from NEML2. We further extend the MOOSE mesh infrastructure to support cohesive-zone calculations on distributed meshes. The framework is verified and demonstrated through three progressive studies: Poisson’s equation on a smoothed starshaped domain, a manufactured thermal-contact problem on a non-interface-fitted mesh, and a two-dimensional polycrystalline representative volume element combining crystal plasticity with cohesive grain-boundary interfaces. Across these studies, the shifted formulations reproduce boundary- and interface-fitted reference solutions with high fidelity, indicating that the proposed framework provides an accurate and efficient route to boundary- and interface-dominated simulations on arbitrary geometries without requiring fitted meshes.

Yang, Cheng-Hau↗