Search NASA⌕ Search

SEARCH · Search NASA

Results for “Belt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Three Classes of Kuiper Belt Objects: Theory and Observations

As part of the Origins of Solar Systems program our team conducted a dynamically motivated search for three classes of Kuiper belt objects (distant comets near and beyond the orbit of Neptune). Our strategy has been to exploit variations in the sky density of Kuiper belt that result from the gravitational influence of Neptune. By searching two regions of the sky, one nearly 90 degrees from Neptune and one nearly opposite Neptune, and comparing the number of objects discovered in each region we are able to constrain the relative populations of resonant and non-resonant objects, a fundamental quantity in Kuiper belt formation models. In addition, by searching at a variety of angles above the plane of the solar system we have constrained the inclination distribution of Kuiper belt objects. We have conducted four searches for this program. One was in February 1999 and August 2000 at the Canada-France-Hawaii telescope (3.6-meter), and another was in May 1999 and Oct. 2000 at the Kitt Peak National Observatory (4-meter). In addition, a search for Uranian satellites was conducted.

Holman, Mathew J.↗

Sm-Nd dating of Fig Tree clay minerals of the Barberton greenstone belt, South Africa

Sm-Nd isotopic data from carbonate-derived clay minerals of the 3.22-3.25 Ga Fig Tree Group, Barberton greenstone belt, South Africa, form a linear array corresponding to an age of 3102 +/- 64 Ma, making these minerals the oldest dated clays on Earth. The obtained age is 120-160 m.y. younger than the depositional age determined by zircon geochronology. Nd model ages for the clays range from approximately 3.39 to 3.44 Ga and almost cover the age variation of the Barberton greenstone belt rocks, consistent with independent evidence that the clay minerals are derived from material of the belt. The combined isotopic and mineralogical data provide evidence for a cryptic thermal overprint in the sediments of the belt. However, the highest temperature reached by the samples since the time of clay-mineral formation was <300 degrees C, lower than virtually any known early Archean supracrustal sequence.

Non-NASA Center↗

Cosmic Ray Mantle Visibility on Kuiper Belt Objects

Optically red objects constitute the dynamically cold, old component of the Classical Kuiper Belt (40 - 47 AU) with heliocentric orbits of low eccentricity and inclination. The red colors likely arise from primordial mixed ices processed by irradiation to meters in surface depth over the past four billion years, since the time of giant planet migration and Kuiper Belt stirring, at relatively moderate dosages of 60 gigarads provided by galactic cosmic ray protons and heavier ions. The red cosmic ray mantle is uniformly visible on the cold classical objects beneath a minimally thin eroded layer of more neutrally colored material arising from cumulative effects of heliospheric particle irradiation. The radiation fluxes are lowest in the middle heliospheric region containing the Classical Kuiper Belt and increase from there both towards and away from the Sun. Despite increasing irradiation at various times of solar system history from increases in solar and interstellar ion fluxes, the red object region has apparently never reached sufficiently high dosage levels to neutralize in color the red mantle material. Erosion processes, including plasma sputtering and micrometeroid impacts, act continuously to reduce thickness of the upper neutral crust and expose the cosmic ray mantle. A deeper layer at tens of meters and more may consist of relatively unprocessed ices that can erupt to the surface by larger impacts or cryovolcanism and account for brighter surfaces of larger objects such as 2003 UB313. Surface colors among the Kuiper Belt and other icy objects of the outer solar system are then a function, assuming uniform primordial composition, of relative thickness for the three layers and of the resurfacing age dependent on the orbital and impact history of each object.

Cooper, John F.↗

Radiation Belt Storm Probe (RBSP) Mission

Scheduled to launch in May 2012, NASA's dual spacecraft Living With a Star Radiation Belt Storm Probe mission carries the field and particle instrumentation needed to determine the processes that produce enhancements in radiation belt ion and electron fluxes, the dominant mechanisms that cause the loss of relativistic electrons, and the manner by which the ring current and other geomagnetic phenomena affect radiation belt behavior. The two spacecraft will operate in low-inclination elliptical lapping orbits around the Earth, within and immediately exterior to the Van Allen radiation belts. During course of their two year primary mission, they will cover the full range of local times, measuring both AC and DC electric and magnetic fields to 10kHz, as well as ions from 50 eV to 1 GeV and electrons with energies ranging from 50 eV to 10 MeV.

Sibeck, D. G.↗

Metallurgical Design and Development of NASA Crawler/Transporter Tread Belt Shoe Castings

The NASA Crawler/Transporters (CT-1 and CT-2) used to transport the Space Shuffles are one of the largest tracked vehicles in existence today. Two of these machines have been used to move space flight vehicles at Kennedy Space Center since the Apollo missions of the 1960's and relatively few modifications have been made to keep them operational. In September of 2003 during normal Crawler/Transporter operations cracks were observed along the roller pad surfaces of several tread belt shoes. Further examination showed 20 cracked shoes on CT-1 and 40 cracked shoes on CT-2 and a formal failure analysis investigation was undertaken while the cracked shoes were replaced. Six shoes were cross-sectioned with the fracture surfaces exposed and it was determined that the cracks were due to fatigue that initiated on the internal casting web channels at pre-existing casting defects and propagated through thickness both transgranularly and intergranularly between internal shrinkage cavities, porosity, and along austenitic and ferritic grain boundaries. The original shoes were cast during the 1960's using a modified 861330 steel with slightly higher levels of chromium, nickel and molybdenum followed by heat treatment to achieve a minimum tensile strength of 11 Oksi. Subsequent metallurgical analysis of the tread belt shoes after multiple failures showed excessive internal defects, alloy segregation, a nonuniform ferritic/ bainitic/martensitic microstructure, and low average tensile properties indicative of poor casting and poor heat-treatment. As a result, NASA funded an initiative to replace all of the tread belt shoes on both crawler/transporters along with a redesign of the alloy, manufacturing, and heat-treatment to create a homogeneous cast structure with uniform mechanical and metallurgical properties. ME Global, a wholly owned subsidiary of ME Elecmetal based in Minneapolis, MN was selected as manufacturing and design partner to develop the new shoes and this paper describes the research, development, and manufacturing that resulted in the successful delivery of 1044 new Crawler/Transporter tread belt shoes all meeting rigid metallurgical and mechanical design criteria derived from finite element modeling of the stress loads required for safe space shuttle transport.

Parker, Donald S.↗

The Magnetic and Shielding Effects of Ring Current on Radiation Belt Dynamics

The ring current plays many key roles in controlling magnetospheric dynamics. A well-known example is the magnetic depression produced by the ring current, which alters the drift paths of radiation belt electrons and may cause significant electron flux dropout. Little attention is paid to the ring current shielding effect on radiation belt dynamics. A recent simulation study that combines the Comprehensive Ring Current Model (CRCM) with the Radiation Belt Environment (RBE) model has revealed that the ring current-associated shielding field directly and/or indirectly weakens the relativistic electron flux increase during magnetic storms. In this talk, we will discuss how ring current magnetic field and electric shielding moderate the radiation belt enhancement.

Fok, Mei-Ching↗

Science Objectives and Rationale for the Radiation Belt Storm Probes Mission

The NASA Radiation Belt Storm Probes (RBSP) mission addresses how populations of high energy charged particles are created, vary, and evolve in space environments, and specifically within Earths magnetically trapped radiation belts. RBSP, with a nominal launch date of August 2012, comprises two spacecraft making in situ measurements for at least 2 years in nearly the same highly elliptical, low inclination orbits (1.1 x 5.8 RE, 10 deg.).The orbits are slightly different so that 1 spacecraft laps the other spacecraft about every 2.5 months, allowing separation of spatial from temporal effects over spatial scales ranging from 0.1 to 5 RE. The uniquely comprehensive suite of instruments, identical on the two spacecraft, measures all of the particle (electrons, ions, ion composition), fields (E and B),and wave distributions (dE and dB) that are needed to resolve the most critical science questions. Here we summarize the high level science objectives for the RBSP mission, provide historical background on studies of Earth and planetary radiation belts, present examples of the most compelling scientific mysteries of the radiation belts, present the mission design of the RBSP mission that targets these mysteries and objectives, present the observation and measurement requirements for the mission, and introduce the instrumentation that will deliver these measurements. This paper references and is followed by a number of companion papers that describe the details of the RBSP mission, spacecraft, and instruments.

magnetosphere↗

Carbon Storage in Fold‐and‐Thrust Belts: An Overlooked Gigatonne Storage Opportunity

This study presents numerical investigations of the trapping characteristics of fold-and-thrust belt structures, defining three carbon capture and storage (CCS) play types that could be used to store commercial volumes (millions of tonnes) of CO 2 . Specifically, we present simulations of CO 2 storage in three fold-and-thrust belt models comprising a thrust-ramp, duplex, and thrust-fold geometry. To constrain these play types in realistic geology, each model is based on a study site, including a novel investigation of a greenfield saline reservoir in Virginia, USA, being considered for commercial carbon storage and two well-characterized petroleum fields: the Wilburton field in Oklahoma, USA, and the Incahuasi field in Bolivia. Our results provide insight into several key parameters, such as the long-term security of injected CO 2 in these geologies and injection strategies for maximizing storage efficiency while reducing pressure-related risk. These results improve the understanding of CCS in fold-and-thrust belt storage sites globally by describing general storage parameters that may be applied to site-specific projects. We find that thrust-ramp geometries may securely trap CO 2 through solubility and hydrodynamic trapping under suitable reservoir conditions, duplex structures may store some quantities of CO 2 but are pressure-constrained, and that thrust-ramp structures may store large quantities of CO 2 by maximizing fetch volume, which simultaneously lowers geomechanical risk by reducing pressure buildup along zones of weakness.

42 ENGINEERING↗

Rapid Acceleration Bursts in the Van Allen Radiation Belt

Abstract The fast Van Allen radiation belt electron dynamics during geomagnetic storms have not yet been fully explained, in part due to limitations of standard satellite missions in both orbit and the number of spacecraft. Here we overcome these limitations using measurements from the Global Positioning System (GPS) constellation during an acceleration event on 26 August 2018. We show that the acceleration of relativistic electrons occurs in two distinct bursts, each dominated by a different acceleration mechanism. The first burst enhances the radiation belt electrons by four orders of magnitude in 2 hr and is consistent with ULF‐wave radial diffusion. The second burst is likely caused by the local acceleration and delivers an order‐of‐magnitude increase in 20 min. This work demonstrates how distributed, operational measurements can be used to resolve phenomena not observable with previous capabilities, and that rapid energization of the radiation belt can occur much faster than previously reported.

79 ASTRONOMY AND ASTROPHYSICS↗

Revealing the Formation of the <20 MeV Inner Proton Radiation Belt at L ∼ 2 During the 10–11 May 2024 Superstorm

A new proton radiation belt was identified during the geomagnetic superstorm of 10–11 May 2024. To investigate its origin, we use an MHD-test particle simulation to model solar energetic proton (SEP) trapping and the evolution of the initial trapped proton population during the storm. The simulation weights the injected SEP population with interplanetary proton measurements and the initial trapped proton radial profile with energy-resolved Weather System Follow-on-Microwave (WSF-M) proton data, enabling quantitative comparison with observations. Results show that SEP contributions are minimal; the new ∼2–18 MeV belt at L ∼ 2 forms mainly through redistribution and energization of the initial trapped population within hours of the CME shock, driven by subsequent electric field impulses, rather than the initial shock alone. These results provide quantitative evidence based on realistic, plasma-dependent field dynamics and significantly advance understanding of inner radiation belt formation.

79 ASTRONOMY AND ASTROPHYSICS↗

BAOBAB (Big And Outrageously Bold Asteroid Belt) Project

One of the intriguing results of NASA's Dawn mission is the composition and structure of the Main Asteroid Belt's only known dwarf planet, Ceres [1]. It has a top layer of dehydrated clays and salts [2] and an icy-rocky mantle [3,4]. It is widely known that the asteroid belt failed to accrete as a planet by resonances between the Sun and Jupiter. About 20-30 asteroids >100 km diameter are probably differentiated protoplanets [5]. 1) how many more and which ones are fragments of protoplanets? 2) How many and which ones are primordial rubble piles left over from condensation of the solar nebula? 3) How would we go about gaining better and more complete characterization of the mass, interior structure and composition of the Main Belt asteroid population? 4) What is the relationship between asteroids and ocean worlds? Bulk parameters such as the mass, density, and porosity, are important to characterize the structure of any celestial body, and for asteroids in particular, they can shed light on the conditions in the early solar system. Asteroid density estimates exist but currently they are often based on assumed properties of taxonomic classes, or through astronomical survey data where interactions with asteroids are weak at best resulting in large measurement uncertainty. We only have direct density estimates from spacecraft encounters for a few asteroids at this time. Knowledge of the asteroids is significant not only to understand their role in solar system workings, but also to assess their potential as space resources, as impact hazards on Earth, or even as harboring life forms. And for the distant future, we want to know if the idea put forth in a contest sponsored by Physics Today, to surface the asteroids into highly reflecting, polished surfaces and use them as a massively segmented mirror for astrophysical exploration [6], is feasible.

Asteroid Belt↗

A Kuiper Belt Object Orbiter Enabled By 10 kW Kilopower Electric Propulsion

Recently, the New Horizons spacecraft flew by the Kuiper Belt Object Ultima Thule 13 years after launch. While flybys are a necessary 'first look' at the object in question a more comprehensive evaluation of the object will require an orbiter. Due to these object’s low mass a chemical propulsion system is not a viable option for entering their shallow gravity wells. The Dawn mission showed that solar electric propulsion is significantly better at the task of reaching low mass objects, but at Kuiper belt distances solar power is not a viable choice. A small nuclear reactor based on the recent kilopower ground test could provide 1-10 kWe of power for an electric propulsion system. The NASA Compass Team developed a Nuclear Electric Propulsion Kuiper Belt Object Orbiter to explore what a vehicle would look like to orbit these deep space objects.

Kuiper belt Object↗

Detection of Hydration on Nominally Anhydrous S-Complex Main Belt Asteroids

We present the results of a survey of nominally anhydrous Main Belt S-complex asteroids. Thirty-three observations of 29 unique asteroids were obtained using the IRTF+SpeX instrument in prism and LXD short modes. We report for the first time that S-complex main belt asteroids have 3-μm features. The majority of the observations (27 of 33) have a detectable 3-μm feature that is at least 1% band depth or greater (within error), indicating the presence of hydration. Most of the asteroids have bands of 1 –2.5% depth but a notable fraction (9 of the observations) have band depths of >5%. These band depths are comparable with low albedo asteroids in the mid and outer belt that experienced aqueous alteration. We investigate the origin of the hydration, searching for correlations with orbital, physical and circumstantial parameters. However, we do not find any strong or moderate correlations with 3-μm band depth, indicating multiple factors may be at play, including exogenic sources, primordial water and/or solar wind implantation. Additionally, we report the mineralogies of the asteroids, derived from the prism observations.

Main Belt S-complex asteroids↗

Detection of Hydration on Nominally Anhydrous S-Complex Main Belt Asteroids

We present the results of a survey of nominally anhydrous main belt S-complex asteroids. Thirty-three observations of 29 unique asteroids were obtained using the IRTF+SpeX instrument in prism and LXD short modes. We report for the first time that S-complex main belt asteroids have 3μm features. The majority of the observations(27 of 33)have a detectable 3μm feature that has at least 1% band depth or greater (within error), indicating the presence of hydration. Most of the asteroids have bands of 1%–2.5% depth, but a notable fraction (nine of the observations) have band depths of>5%. These band depths are comparable to those of low albedo asteroids in the middle and outer belt that have experienced aqueous alteration. We investigate the origin of the hydration, searching for correlations with orbital, physical, and circumstantial parameters. However, we do not find any strong or moderate correlations with 3μm band depth, indicating that multiple factors may be at play, including exogenic sources, primordial water, and/or solar wind implantation. Additionally, we report the mineralogies of the asteroids, derived from the prism observations.

Main Belt S-complex asteroids↗

Hidden in Plain Sight: A New Main Belt Population of Aqueously Altered and Thermally Metamorphosed Asteroids

C-complex low albedo asteroids are understood to be related to aqueously altered carbonaceous chondrite meteorites. However, in recent years, a new subgroup of aqueously altered meteorites that have experienced significant heating after their initial interactions with water has been extensively studied. It remains unclear where the aqueously altered and heated parent bodies are located in the asteroid belt. To address this question, we reanalyzed the original dataset that defined the Bus-DeMeo spectral taxonomy of asteroids (DeMeo et al., 2009) using a machine learning approach trained with near-infrared archival meteorite spectra. Results show that ~50% of the C-complex asteroids first identified in the Bus-DeMeo asteroid spectral taxonomy are aqueously altered and heated. Though Ryugu has been shown to also have experienced both of these processes, this is the first evidence of a population of aqueously altered and thermally metamorphosed asteroids in the Main Asteroid Belt. Based on the expected velocity and frequency of impacts in the main belt population, we conclude that impacts are the most likely heat source driving thermal metamorphism we identify. Moreover, these aqueously altered and thermally metamorphosed asteroids may represent a primordial population of low-albedo material that formed in situ in the inner solar system. If these asteroids formed in place, rather than being brought in from the outer solar system during giant planet migration, they would have experienced more frequent and higher velocity impacts, resulting in their distinct mineralogy.

Main Belt asteroids↗

A model for Jupiter's proton radiation belt

A model for electron and proton energy and density in Jupiter's radiation belt is proposed. It is assumed that electrons diffuse inward from the solar wind. The Davis and Chang diffusion model, in which there is a very steep L-shell dependence in density and energy, is scaled outwards from the peak of the belts at about 1.5 to 2 Jupiter radii to the magnetopause as defined by the magnetic moment. The energetic electron density is calculated to be one billionth of the density in the solar wind, and that is assumed to be the trapping ratio of Jupiter's synchrotron belts. It is further assumed that the same figures apply to protons. The flux density at 80 MHz was measured by the Culgoora ring to be identical to that at 3000 MHz, implying a constant flux density of the synchrotron source of over 20 or 30 to 1 in frequency. It is suggested that the synchrotron spectrum is flat over more than an order of magnitude of frequency. Jupiter is an enormous synchrotron source and has a strong magnetic field, causing long diffusion times for electrons in the magnetosphere.

Warwick, J.↗

A self-consistent model for Jupiter's radiation belts

The solar wind is assumed to be a sufficient source for the radiation belts of Jupiter, with radial diffusion as the process for getting the solar wind fluxes into the inner regions of the radiation belts. The process of a radial diffusion source is combined with pitch-angle diffusion losses to estimate an upper limit to the proton and electron fluxes. The upper limit to the integral proton and electron fluxes in the outer zone scale as L to the -6th power throughout the outer zone, assuming that the magnetic moment is conserved. It is important that these fluxes are above the stably trapped flux levels in the outer regions of the belts; the instability will work because the energies of the particles are above the critical value required.

Thorne, R. M.↗