Search NASA⌕ Search

SEARCH · Search NASA

Results for “Binding Energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

The Structure and Stability of B(n)H(+) Clusters

The geometries of the B(n)H(+) clusters for n=1-13 have been optimized at the B3LYP level of theory. Excluding B2H(+) all clusters are low-spin coupled. The structures appear to be related to the bare B(+)(n) clusters in two ways: 1) an H atom is added to the B(+)(n) cluster or 2) a BH is added to the B(+)(n-1) cluster. The B(+)(n)-H binding energies are computed at the B3LYP level of theory, and calibrated n using the CCSD(T) level of theory. The computed results tend to fall between the experimental best estimates and the experimental lower bounds. The B(+)(n)-H binding energies show an inverse correspondence with the B+(n-1)-B values) while the B(+)(n-1)-B and B(+)(n-1)-BH results tend to parallel each other.

Ricca, Alessandra↗

A theory of adhesion at a bimetallic interface - Overlap effects.

A preliminary calculation of the chemical bonding adhesive interaction between metal surfaces is provided. In this first theory the Hohenberg and Kohn formalism is used to give the bimetallic adhesive binding energy versus separation. The close-packed planes of Al, Mg, and Zn are considered. The effect of simple overlap of the metal-vacuum distributions is determined. The importance of registry between contact surfaces is ascertained. A minimum in the binding energy curve is exhibited for all combinations. The theoretical predictions agree with trends in bond strengths taken from available experimental data. An insight into the mechanisms involved in metallic transfer is given. The relationship between adhesive energies, cohesive energies, and surface energies is discussed.

Ferrante, J.↗

Computational studies of metal-metal and metal-ligand interactions

Accurate calculations on the bond length, dipole moment, and harmonic frequency of CO are presented, using large basis sets and high levels of electron correlation. The geometric structure, force constants and binding energies of Cr(C0)6 and Cr(CO)5 are computed using large basis sets and high levels of electron correlation. The molecule 04(+) is studied, using large basis sets and high levels of electron correlation, including the CASSCF, CASSI and CASPT2 methods. Binding energies, geometries and frequencies are computed. Symmetry breaking is a particular problem for the antisymmetric stretch, which is addressed using the CASSI method. The symmetry breaking problem in 04(+) has also been studied using the Brueckner coupled cluster method. This gives results in good agreement with CASSI. A multi-region numerical integration scheme is investigated for use in Density Functional Calculations. This scheme is found to give comparable results to a widely used scheme based on the Euler-Maclaurin technique.

Barnes, Leslie A.↗

Computational studies of metal-metal and metal-ligand interactions

Accurate calculations on the bond length, dipole moment, and harmonic frequency of CO are presented, using large basis sets and high levels of electron correlation. The geometric structure, force constants and binding energies of Cr(CO)6 and Cr(CO)5 are computed using large basis sets and high levels of electron correlation. The molecule O4(+) is studied, using large basis sets and high levels of electron correlation, including the CASSCF, CASSI,and CASPT2 methods. Binding energies, geometries and frequencies are computed. Symmetry breaking is a particular problem for the antisymmetric stretch, which is addressed using the CASSI method. The symmetry breaking problem in O4(+) has also been studied using the Brueckner coupled-cluster method. This gives results in good agreement with CASSI. A multi-region numerical integration scheme is investigated for use in Density Functional Calculations. This scheme is found to give comparable results to a widely used scheme based on the Euler-Maclaurin technique.

Barnes, Leslie A.↗

Gas-phase chemistry in dense interstellar clouds including grain surface molecular depletion and desorption

We present time-dependent models of the chemical evolution of molecular clouds which include depletion of atoms and molecules onto grain surfaces and desorption, as well as gas-phase interactions. We have included three mechanisms to remove species from the grain mantles: thermal evaporation, cosmic-ray-induced heating, and photodesorption. A wide range of parameter space has been explored to examine the abundance of species present both on the grain mantles and in the gas phase as a function of both position in the cloud (visual extinction) and of evolutionary state (time). The dominant mechanism that removes molecules from the grain mantles is cosmic-ray desorption. At times greater than the depletion timescale, the abundances of some simple species agree with abundances observed in the cold dark cloud TMC-1. Even though cosmic-ray desorption preserves the gas-phase chemistry at late times, molecules do show significant depletions from the gas phase. Examination of the dependence of depletion as a function of density shows that when the density increases from 10(exp 3)/cc to 10(exp 5)/cc several species including HCO(+), HCN, and CN show gas-phase abundance reductions of over an order of magnitude. The CO: H2O ratio in the grain mantles for our standard model is on the order of 10:1, in reasonable agreement with observations of nonpolar CO ice features in rho Ophiuchus and Serpens. We have also examined the interdependence of CO depletion with the space density of molecular hydrogen and binding energy to the grain surface. We find that the observed depletion of CO in Taurus in inconsistent with CO bonding in an H2O rich mantle, in agreement with observations. We suggest that if interstellar grains consist of an outer layer of CO ice, then the binding energies for many species to the grain mantle may be lower than commonly used, and a significant portion of molecular material may be maintained in the gas phase.

Bergin, E. A.↗

The role of cesium suboxides in low-work-function surface layers studied by X-ray photoelectron spectroscopy - Ag-O-Cs

The oxidation of cesium on silver substrates has been studied using photoyield measurements and X-ray photoelectron spectroscopy. The occurrence of two O1s peaks in the core-level spectrum at 527.5 and 531.5-eV binding energy for cesium and oxygen exposures giving the optimum photoyield proves that two oxides of cesium exist in high-photoyield surfaces, and not Cs2O alone as previously thought. From the shape and position of the cesium peaks and the Auger parameter, the assignment of the O1s peaks at 527.5- and 531.5-eV binding energies to oxygen in Cs2O and Cs11O3, respectively, can be made. Hence the total cesium-oxygen layer is a mixed phase consisting of Cs2O + Cs11O3, approximately 20-40 A thick.

Yang, S.-J.↗

Theoretical study of Cr(+) and Co(+) bound to H2 and N2

Binding energies of Co(H2)n(+) (n = 1-3) and CrN2(+) computed using the modified coupled-pair functional approach agree well with measured values. The calculations show that both H2 and N2 bond much more strongly to Co(+) than to Cr(+). Theoretical studies also show that despite the similar polarizabilities of N2 and Ar, the CrN2(+) binding energy is twice as large as that of CrAr(+) due to the charge-quadrupole contribution. Finally, the bonding of H2 and N2 with Na(+) and Mg(+) is contrasted with that for Cr(+) and Co(+).

Bauschlicher, Charles W., Jr.↗

Electronic structure of BaO/W cathode surfaces

The local electronic structure of the emissive layer of barium dispenser thermionic cathodes is investigated theoretically using the relativistic scattered-wave approach. The interaction of Ba and O with W, Os, and W-Os alloy surfaces is studied with atomic clusters modeling different absorption environments representative of B- and M-type cathodes. Ba is found to be strongly oxidized, while O and the metal substrate are in a reduced chemical state. The presence of O enhances the surface dipole and Ba binding energy relative to Ba on W. Model results for W-Os alloy substrates show only relatively small changes in Ba and O for identical geometries, but very large charge redistributions inside the substrate, which are attributed to the electronegativity difference between Os and W. If Os is present in the surface layer, the charge transfer from Ba to the substrate and the Ba binding energy increase relative to W. Explanations are offered for the improved electron emission from alloy surfaces and the different emission enhancement for different alloy substrates.

Muller, Wolfgang↗

Vacancy-Vacancy Interaction in Copper

The binding energy of two vacancies in a static lattice as a function of their separation and the positions of their displaced neighboring atoms has been calculated using a Morse potential function model for copper. It was found that two vacancies attract one another at separation less than about 7 A. At separations greater than 7 A the vacancies do not interact appreciably. The most stable separation was found to be the first nearest- neighbor separation or the divacancy configuration, for which the binding energy was found to be 0.64 ev. Based on these calculations, it is shown that third-stage annealing in irradiated copper may be accounted for by divacancy migration. The role of the divacancy in copper self-diffusion is also explained.

Girifalco, L. A.↗

Interpretation of the silver L X-ray spectrum

Silver L X-ray energies were calculated using theoretical binding energies from relaxed orbital relativistic Hartree-Fock-Slater calculations. Theoretical X-ray energies are compared with experimental results.

Chen, M. H.↗

Bandgap narrowing in moderately to heavily doped silicon

A theoretical model of bandgap narrowing in silicon at high doping levels has been developed. The model takes into account the electrostatic energy of interaction between a minority carrier and the majority carriers surrounding it, which reduces the thermal energy necessary for creation of an electron-hole pair. A pair energy similar to the excitonic binding energy of bound electron-hole pairs in insulators is obtained. Theoretical results are in excellent agreement with experimental results in the doping range from 3 times 10 to the 17th to 1.5 times 10 to the 20th/cu cm at room temperature. These results indicate that at high injection levels such as a transistor biased into the conductivity-modulation regime or a solar cell whose surface is established by ion implantation into an oxide layer, the bandgap narrowing is determined by the injected carrier concentration rather than by the doping level.

Lanyon, H. P. D.↗

The hydrodynamics of off-center explosions

The behavior of off-center supernova explosions is investigated using a two-dimensional hydrodynamic code. An important application of these calculations is the possible formation of high-velocity pulsars. The dependence of the final velocity of the collapsed remnant on the location and energy of the explosion is computed. The largest remnant velocities result from explosions located at a mass fraction of 0.5. An explosion energy 50% greater than the binding energy of the star ejects 0.51 solar masses, producing a 1.4 solar mass remnant with a velocity of 400 km/s. However, this energy must be generated in a very small region of the star in order to create the required asymmetry in the explosion. Because of this, a specific energy of about 10 to the 20th ergs/g is needed. Nuclear reactions can produce no more than about 5 x 10 to the 17th erg/g, and it is unclear how the energy produced in gravitational collapse models can be sufficiently localized. Unless a supernova mechanism can be found which can produce enough energy in a small region of the star, off-center explosions do not provide a satisfactory explanation for high-velocity pulsars.

Fryxell, B. A.↗

Surface analysis of space telescope material specimens

Surface analysis by electron spectroscopy for chemical analysis (ESCA) was used to characterize a number of the material samples for the space telescope. With ESCA, the sample is irradiated with monoenergetic soft X-rays and the resulting emitted electrons are energy analyzed to determine the binding energy of electrons to the surface atoms. The major peaks were used in the quantitative determination of the surface composition. The presence of trace elements (impurities below 1% atomic composition) was also detailed. Initially a survey scan was run for each sample to deduce the elemental composition. Then the major peaks of interest and those of the trace elements were individually examined. After this, the samples were argon sputtered to etch away surface layers, and then additional measurements were carried out in order to obtain depth profile information. In this way it was possible for those species present only on the surface to be distinguished from those having a significant depth distribution within the sample.

Fromhold, A. T.↗

Gravitational effects on planetary neutron flux spectra

The effects of gravity on the planetary neutron flux spectra for planet Mars, and the lifetime of the neutron, were investigated using a modified one-dimensional diffusion accelerated neutral-particle transport code, coupled with a multigroup cross-section library tailored specifically for Mars. The results showed the presence of a qualitatively new feature in planetary neutron leakage spectra in the form of a component of returning neutrons with kinetic energies less than the gravitational binding energy (0.132 eV for Mars). The net effect is an enhancement in flux at the lowest energies that is largest at and above the outermost layer of planetary matter.

Feldman, W. C.↗

Electromagnetic-gravitational energy systems

Two methods are considered to 'tap' the earth's rotational energy. This ancient 'collapsed gravitational energy' exceeds the earth-lunar binding energy. One involves an orbiting 'electromagnetic-gravitational' coupling system whereby the earth's rotation, with its nonuniform mass distribution, first uses gravity to add orbital energy to a satellite, similar to a planetary 'flyby'. The second stage involves enhanced satellite 'drag' as current-carrying coils withdraw the added orbital energy as they pass through the earth's nonuniform magnetic field. A second more direct method couples the earth's rotational motion using conducting wires moving through the noncorotating part (ionospheric current systems) of the geomagnetic field. These methods, although not immediately feasible, are considerably more efficient than using pure gravitational coupling to earth-moon tides.

Schatten, K. H.↗

Core level excitation of simple gases

The ionization of simple gases by electron bombardment exhibits distinct resonances at electron energies slightly below the core level binding energies of the atomic constituents of the gas. A vacancy in an inner shell of the atom may recombine by a radiationless Auger process, thus leaving the molecule in a singly or higher ionized state. These ions are easily collected and the threshold resonances for excitation are evident in the second derivative of the ion yield plotted as a function of the energy of the electron beam. By using a mixture of gases, such as CO and CO2, it is possible to measure relative chemical shifts of the C and O 1s thresholds. In this case the C 1s threshold is 3.9 eV lower in CO than in CO2, and the O 1s threshold is 2.7 eV lower in CO than in CO2. The feasibility of constructing a simple analyzer based on this technique will be discussed to supplement conventional mass spectrometer analysis of gas composition.

Zhang, A.↗