Search NASA⌕ Search

SEARCH · Search NASA

Results for “Blades”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Heat Transfer Measurements and Computations on Blade of Variable Speed Power Turbine Blade Cascade

Heat transfer measurements were obtained on the blade surface of a two-dimensional section of a variable speed power turbine (VSPT) rotor blade in a linear cascade. Infrared thermography was used to determine the blade heat transfer distribution. Changes in the local heat transfer rates with Reynolds number were used to identify the laminar, turbulent, and transitional flow regimes, as well as to determine regions of flow separation. Steady-state data were obtained for six incidence angles ranging from 15.8° to –51.0°, and at five flow conditions for each angle.

Philip E Poinsatte↗
DOE OSTI2020

Ceramic matrix composite (CMC) turbine blades and methods of forming CMC turbine blades

A ceramic matrix composite (CMC) turbine blade includes a root region, a narrowed neck region extending from the root region, and a hub region extending from the narrowed neck region. At least one central CMC ply extending from the root region is interwoven with at least one insert extending toward the narrowed neck region from the hub region. A method of forming a CMC turbine blade includes interweaving at least one central CMC ply extending from the root region with at least one insert extending toward the narrowed neck region from the hub region. The CMC turbine blade includes a root region, a narrowed neck region extending from the root region, and a hub region extending from the narrowed neck region.

36 MATERIALS SCIENCE↗
NASA NTRS1970

Method of calculating blade-to-blade plane flow in centrifugal pump

Steam filament solution determines velocity distribution due to potential flow in the blade-to-blade plane of the radial impeller. This is used to determine the mass-averaged relative fluid angle, which is in turn used in an axisymmetric program to obtain steam surfaces of the assumed axisymmetric flow.

Jackson, E. D.↗
NASA NTRS1973

Overall and blade-element performance of a transonic compressor stage with multiple-circular-arc blades at tip speed of 419 meters per second

A 50-centimeter-diameter axial-flow transonic compressor stage with multiple-circular-arc blades was designed and tested to study the effects of blade shape on efficiency and stall margin. At design speed, peak efficiency of 0.80 occurred at an equivalent weight flow of 29.0 kilograms per second. Measured total pressure ratio and total temperature ratio at peak efficiency were 1.69 and 1.20, respectively. The stall margin at design speed and an equivalent weight flow of 29.0 kilograms per second was 9 percent. The measured stall margin at design weight flow and speed was 15 percent. A comparison of rotor performance made with and without the stator showed a decrease in pressure ratio, peak efficiency, and maximum weight flow with the addition of the stator.

Kovich, G.↗
NASA NTRS1976

Prediction of rotating-blade vortex noise from noise of nonrotating blades

Measurements were conducted in an acoustic wind tunnel to determine vortex noise of nonrotating circular cylinders and NACA 0012 airfoils. Both constant-width and spanwise tapered models were tested at a low turbulence level. The constant-diameter cylinder and constant-chord airfoil also were tested in the turbulent wake generated by an upstream cylinder or airfoil. Vortex noise radiation from nonrotating circular cylinders at Reynolds numbers matching those of the rotating-blade tests were found to be strongly dependent on surface conditions and Reynolds number. Vortex noise of rotating circular cylinder blades, operating with and without the shed wake blown downstream, could be predicted using data for nonrotating circular cylinders as functions of Reynolds number. Vortex noise of nonrotating airfoils was found to be trailing-edge noise at a time frequence equal to that predicted for maximum-amplitude Tollmein-Schlichting instability waves at the trailing edge.

Fink, M. R.↗
NASA NTRS1978

Bounds on thickness and loading noise of rotating blades and the favorable effect of blade sweep on noise reduction

The maxima of amplitudes of thickness and loading noise harmonics are established when the radial distribution of blade chord, thickness ratio, and lift coefficient is specified. It is first shown that only airfoils with thickness distribution and chordwise loading distributions which are symmetric with respect to midchord need be considered for finding the absolute maxima of thickness and loading noise. The resulting chordwise thickness and load distributions for these maximum noise conditions require infinite slope at some points along the chord but otherwise are uniform. It is shown that sweeping the blades reduces the thickness and loading noise, but there is no optimum sweep which generates the lowest noise.

Farassat, F.↗
NASA NTRS1977

Perturbation solutions for blade-to-blade surfaces of a transonic compressor

The paper describes a perturbation method for turbomachinery calculations, particularly where it is necessary to carry out a number of calculations for closely-related flows such as are needed in a parametric study. The method is applied for solving a model problem involving blade-to-blade surfaces of a transonic compressor. Basically, the method makes use of a previously calculated base solution to determine first-order changes in the flow field due to variations in one or more of a variety of geometrical or flow field parameters. The fundamental assumption associated with the perturbation solution is that the magnitude of the deviations from the base solution lies within the range of a linear perturbation analysis. Comparisons are made for results obtained, by varying the thickness ratio of an unstaggered nonlifting cascade composed of biconvex profiles in a flow with an oncoming freestream Mach number of 0.60.

Stahara, S. S.↗
NASA NTRS1980

Blade loading and spanwise effects on the near and far wake characteristics of a compressor rotor blade

An experimental investigation of the blade loading and spanwise effects on the rotor wake is presented. The investigation was limited to a study of a low subsonic and incompressible wake flow found downstream of a lightly loaded rotor. Measurements were made with a tri-axial hot wire probe mounted in the stationary frame of reference at six radial and nine axial positions. At each measurement location, the rotor was run at different operating conditions to discern the effects of blade loading on the wake. Near and far wake measurements are given, including mean velocity and turbulence intensity characteristics. The loading and spanwise effects on rotor wake characteristics were found to be substantial.

Reynolds, B.↗