Search NASA⌕ Search

SEARCH · Search NASA

Results for “Body Patterning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Ejecta patterns diagnostic of planetary rotations

A new scheme for determining a body's rotational history from the geological record is presented. Trajectories of ejecta on a rotating object are affected by the Coriolis effect in a manner characteristic of the direction and speed of the object's spin. This information is registered on the surface in the form of debris deposits and ray patterns, and can be interpreted by comparing photographs of the planet's surface with specified paradigms. This approach has the advantage of being independent of the body's internal structure and of relating its rotational history directly to its cratering chronology. This approach could be used, for example, to date the despinning of Mercury relative to its latest bombardment.

Dobrovolskis, A.↗
NASA NTRS1990

Geochemistry and genesis of the angrites

The major and trace elements were analyzed in samples of LEW86010, LEW87051, and Angra dos Reis angrites were analyzed using INAA and fused-bead EMP techniques. Results suggest that all three angrites originated on a volatile-depleted (Na-poor) but oxidized parent body or on several bodies. The combination of low Na and high FeO/MnO found in these samples suggests that the extreme Na depletion was caused by parent-body outgassing during differentiation, rather than by nebular processes. It was also found that the refractory-element abundances observed in LEW86010 and LEW87051 are related via olivine control; it is suggested that LEW86010 may be a residual melt from a LEW87051-like precursor or that LEW87051 formed from a LEW86010-like precursor via olivine accumulation. On the other hand, the Angra dos Reis displayed an unusual refractory element pattern suggesting that either the angrite parent body was heterogeneous or that Angra dos Reis was formed on a parent body different from that of the other two angrites.

Mittlefehldt, David W.↗
NASA NTRSDate not supplied

Spacesuit and Mobility Performance Changes

The complex interactions between the human body and spacesuit lead to changes inmovement patterns and mobility performancesof the wearer. In general, factors including the geometric properties, such as shape and size, mechanical properties of the suit, and pressurization of the suit are known to be associated with altered movement patterns as compared to an unsuited human.However, their relative contributions have not been explicitly quantified from the mobility performance perspectives. The goal of this study wasthus to assessthe effects fromthe different types of mobility constraintconditions, namely by wearing either a 3D printed hard upper torso (HUT) assembly orfully pressurized spacesuit. The outcome was also compared against the unsuited motions. For this study, an xEMU (exploration Extravehicular Mobility Unit) suitwas considered, which is the next generation spacesuit developed by NASA. In each test condition, the subject was asked to move the arm and hand as prescribedfor different task types, and the corresponding body segment locations were recordedusing a 3D motion capture system. The following three tasks were performedand analyzed: 1) Outward one-handed reaches:the subject in a standing pose made sweeping motions with the extended right arm from the extreme end-to-end positions, including side-to-side at different elevations and top-to-bottom at different azimuths. 2) Outward two-handed reaches:similarto the previous task, howeverthe subject kept the hands together during the motions in order to assessthe areas that can be reached by both hands. 3) Inward one-handed reaches:the subject made right-hand reach motions to the surface of the HUT.The hand traces collected from each task were modeled by a template shape parametrically deformed with a radial basis function. This process enabled foran abstraction of the hand traces into a smooth surface envelope representing the maximally reachable area of the test subject, of which the shapes and sizes were compared across the different test conditions. The preliminary analysis has shown that theoverall size of reachenvelopes decreases in a pressurized suit compared to 3D printed mockup HUT and unsuited conditions. The specific shape of the envelopes, which were determined by the reachable and unreachable zones, alsovary with the testconditions, and the differences werepronounced with the inward reaches to the HUT surface. The latter observation ispotentially relatedto the increased demandfor shoulder and elbow flexions.Overcomingthe resistance from the pressurizedsoft goods and mechanical constraints of the shoulder assemblywas seen to be associated with the difference in motion patterns between the suited and unsuited conditions. Overall, the information quantified from this study is expected to provide structured metrics for spacesuit mobility, which can improve design optimization and human-system integration.

K Han Kim↗
NASA NTRS1987

Gas liquid flow at microgravity conditions - Flow patterns and their transitions

The prediction of flow patterns during gas-liquid flow in conduits is central to the modern approach for modeling two phase flow and heat transfer. The mechanisms of transition are reasonably well understood for flow in pipes on earth where it has been shown that body forces largely control the behavior observed. This work explores the patterns which exist under conditions of microgravity when these body forces are suppressed. Data are presented which were obtained for air-water flow in tubes during drop tower experiments and Learjet trajectories. Preliminary models to explain the observed flow pattern map are evolved.

Dukler, A. E.↗
NASA NTRS2007

Newton-Euler Dynamic Equations of Motion for a Multi-body Spacecraft

The Magnetospheric MultiScale (MMS) mission employs a formation of spinning spacecraft with several flexible appendages and thruster-based control. To understand the complex dynamic interaction of thruster actuation, appendage motion, and spin dynamics, each spacecraft is modeled as a tree of rigid bodies connected by spherical or gimballed joints. The method presented facilitates assembling by inspection the exact, nonlinear dynamic equations of motion for a multibody spacecraft suitable for solution by numerical integration. The building block equations are derived by applying Newton's and Euler's equations of motion to an "element" consisting of two bodies and one joint (spherical and gimballed joints are considered separately). Patterns in the "mass" and L'force" matrices guide assembly by inspection of a general N-body tree-topology system. Straightforward linear algebra operations are employed to eliminate extraneous constraint equations, resulting in a minimum-dimension system of equations to solve. This method thus combines a straightforward, easily-extendable, easily-mechanized formulation with an efficient computer implementation.

Stoneking, Eric↗
NASA NTRS1977

Prediction of static aerodynamic characteristics for slender bodies alone and with lifting surfaces to very high angles of attack

An engineering-type method is presented for computing normal-force and pitching-moment coefficients for slender bodies of circular and noncircular cross section alone and with lifting surfaces. In this method, a semi-empirical term representing viscous-separation crossflow is added to a term representing potential-theory crossflow. For many bodies of revolution, computed aerodynamic characteristics are shown to agree with measured results for investigated free-stream Mach numbers from 0.6 to 2.9. The angles of attack extend from 0 deg to 180 deg for M = 2.9 from 0 deg to 60 deg for M = 0.6 to 2.0. For several bodies of elliptic cross section, measured results are also predicted reasonably well over the investigated Mach number range from 0.6 to 2.0 and at angles of attack from 0 deg to 60 deg. As for the bodies of revolution, the predictions are best for supersonic Mach numbers. For body-wing and body-wing-tail configurations with wings of aspect ratios 3 and 4, measured normal-force coefficients and centers are predicted reasonably well at the upper test Mach number of 2.0. Vapor-screen and oil-flow pictures are shown for many body, body-wing and body-wing-tail configurations. When spearation and vortex patterns are asymmetric, undesirable side forces are measured for the models even at zero sideslip angle. Generally, the side-force coefficients decrease or vanish with the following: increase in Mach number, decrease in nose fineness ratio, change from sharp to blunt nose, and flattening of body cross section (particularly the body nose).

Jorgensen, L. H.↗
NASA NTRS1996

Cosmic-Ray-Exposure Ages of Diogenites and the Collisional History of the HED Parent Body or Bodies

Cosmic-ray-exposure ages of meteorites provide information on the collisional history of their parent bodies and the delivery mechanism of meteorites to Earth. The exposure-age distributions of ordinary chondrites show distinct patterns for H, L, and LL types, consistent with their origin on different parent bodies. The exposure-age distributions of howardites, eucrites. and diogenites (HEDS) show a common pattern with major peaks at 22 Ma and 38 Ma This provides additional evidence for a common origin of the HED meteorites, possibly 4 Vesta, although orbital dynamics calculations showed that the delivery of meteorites from Vesta to Earth is difficult. However, the discovery of several kilometer-sized Vesta-like asteroids in the region between Vesta and the 3:1 resonance suggested that these seem more likely parent bodies of the HEDs than Vesta itself. This implies that the exposure-age clusters may represent samples of several parent bodies. Therefore, the near-absence of diogenites with ages <20 Ma might be of interest for the composition of these kilometer-sized fragments of Vesta. Here we present cosmic-ray-exposure ages of 20 diogenites, including 9 new meteorites. In addition, we calculate the probability for each peak to occur by chance, assuming a constant production rate of HED fragments.

Welten, K. C.↗
NASA NTRS1979

The lambda-scheme

A method for integrating the Euler equations of gas dynamics for compressible flows in any hyperbolic case is presented. This method is applied to the Mach number distribution over a stretch of an infinite duct having a variable cross section, and to the distribution in a channel opening into a vacuum with the Mach number equalling 1.04. An example of the ability of this method to handle two-dimensional unsteady flows is shown using the steady shock-and-isobars pattern reached asymptotically about an ablated blunt body with a free stream Mach number equalling 12. A final example is presented where the technique is applied to a three-dimensional steady supersonic flow, with a Mach number of 2 and an angle of attack of 5 deg.

Moretti, G.↗
NASA NTRS1982

Prediction of sound radiation from different practical jet engine inlets

Computer codes which were based upon a special integral representation of the external solutions of the Helmholtz equation were upgraded so that they would yield accurate results for the acoustic radiation patterns in the field surrounding an axisymmetric body for nondimensional wave numbers, based on duct radius, of up to twenty. The accuracy of these computer programs was checked by the use of the point source method for the generation of exact solutions and then by comparison with the results of other experimental and theoretical studies. These computer codes were used in a parametric study of the dependence of the radiated sound field on input modal distribution, wave number, and inlet lip shape. The results of this study show that: (1) as the wave number (i.e., cut off ratio) is increased for a given input modal distribution that the acoustic radiation peak moves towards the inlet centerline and becomes more compact (i.e., narrows); (2) as the input mode number is increased for a given cut off ratio the acoustic radiation peak moves away from the inlet centerline and becomes more compact.

Meyer, W. L.↗
NASA NTRS1986

Numerical simulation of unsteady, viscous, high-angle-of-attack flows using a partially flux-split algorithm

Viscous separated flow surrounding a hemisphere-cylinder body at angles of attack ranging up to 19 deg in transonic flow has been computed using an implicit, approximately-factored, partially flux-split algorithm. The resulting flowfield structures, including the vortical flow on the leeward side of the body and the three-dimensional separation patterns, have been investigated. The computed results show good qualitative and quantitative agreement with experimental data. Furthermore, visualization of the flowfield patterns has yielded insight into the behavior of the three-dimensional separated flow.

Ying, S. X.↗
NASA NTRS1988

Numerical study of unsteady viscous hypersonic blunt body flows with an impinging shock

A complex two-dimensional, unsteady, viscous hypersonic shock wave interaction is numerically simulated by a high-resolution, second-order fully implicit shock-capturing scheme. The physical model consists of a nonstationary oblique shock impinging on the bow shock of a blunt body. Studies indicated that the unsteady flow patterns are slightly different from their steady counterparts. However, for the sample cases investigated the peak surface pressures for the unsteady flows seem to occur at very different impingement locations than for the steady flow cases.

Klopfer, G. H.↗
NASA NTRS1989

Numerical study of unsteady viscous hypersonic blunt body flows with an impinging shock

A complex two-dimensional, unsteady, viscous hypersonic shock wave interaction is numerically simulated by a high-resolution, second-order fully implicit shock-capturing scheme. The physical model consists of a nonstationary oblique shock impinging on the bow shock of a blunt body. Studies indicate that the unsteady flow patterns are slightly different from their steady counterparts. However, for the sample cases investigated the peak surface pressures for the unsteady flows seem to occur at very different impingement locations than for the steady flow cases.

Klopfer, G. H.↗
NASA NTRS2002

Astronauts Need Their Rest Too: Sleep-Wake Actigraphy and Light Exposure During Space Flight

The success and effectiveness of human space flight depends on astronauts' ability to maintain a high level of cognitive performance and vigilance. This alert state ensures the proper operation of sophisticated instrumentation. An important way for humans to remedy fatigue and maintain alertness is to get plenty of rest. Astronauts, however, commonly experience difficulty sleeping while in space. During flight, they may also experience disruption of the body's circadian rhythm - the natural phases the body goes through every day as we oscillate between states of high activity during the waking day and recuperation, rest, and repair during nighttime sleep. Both of these factors are associated with impairment of alertness and performance, which could have important consequences during a mission in space. The human body was designed to sleep at night and be alert and active during the day. We receive these cues from the time of day or amount of light, such as the rising or setting of the sun. However, in the environment of the Space Shuttle or the International Space Station where light levels are highly variable, the characteristics of a 24-hour light/dark cycle are not present to cue the astronauts' bodies about what time of the day it is. Astronauts orbiting Earth see a sunset and sunrise every 90 minutes, sending potentially disruptive signals to the area of the brain that regulates sleep. On STS-107, researchers will measure sleep-wake activity with state-of-the-art technology to quantify how much sleep astronauts obtain in space. Because light is the most powerful time cue to the body's circadian system, individual light exposure patterns of the astronauts will also be monitored to determine if light exposure is associated with sleep disruption. The results of this research could lead to the development of a new treatment for sleep disturbances, enabling crewmembers to avoid the decrements in alertness and performance due to sleep deprivation. What we learn about sleep in space informs treatment for earthbound populations, such as the elderly and insomniacs, who experience frequent sleep disturbances or altered sleep patterns.

Czeisler, Charles↗
NASA NTRS1960

A Visual Technique for Determining Qualitative Aerodynamic Heating Rates on Complex Configurations

An experimental investigation was conducted at a test-section Mach number of 4.95 and a stagnation temperature of 400 F to evaluate a visual technique for obtaining qualitative aerodynamic heat-transfer data on complex configurations.This technique utilized a temperature-sensetive paint indicated that this technique was satisfactory for determining qualitative heat-transfer rates on various bodies, some of which exhibited complex flow patterns. The results obtained have been found useful to guide the instrumentation of quantitative heat-transfer models, to supplement quantitative heat-transfer measurements, and to make preliminary heat-transfer studies for new configurations.

P. Calvin Stainback↗
NASA NTRS2004

Overview of X-38 Hypersonic Aerothermodynamic Wind Tunnel Data and Comparison with Numerical Results

A NASA team of engineers has been organized to design a crew return vehicle for returning International Space Station crew members from orbit. The hypersonic aerothermodynamic characteristics of the X-23/X-24A derived X-38 crew return vehicle are being evaluated in various wind tunnels in support of this effort. Aerothermodynamic data from two NASA hypersonic tunnels at Mach 6 and Mach 10 has been obtained with cast ceramic models and a thermographic phosphorus digital imaging system. General windward surface heating features are described based on experimental surface heating images and surface oil flow patterns for the nominal hypersonic aerodynamic orientation. Body flap reattachment heating levels are examined. Computational Fluid Dynamics tools have been applied at the appropriate wind tunnel conditions to make comparisons with this data.

Campbell, C.↗
NASA NTRS2005

Processing of Lunar Soil Simulant for Space Exploration Applications

NASA's long-term vision for space exploration includes developing human habitats and conducting scientific investigations on planetary bodies, especially on Moon and Mars. To reduce the level of up-mass processing and utilization of planetary in-situ resources is recognized as an important element of this vision. Within this scope and context, we have undertaken a general effort aimed primarily at extracting and refining metals, developing glass, glass-ceramic, or traditional ceramic type materials using lunar soil simulants. In this paper we will present preliminary results on our effort on carbothermal reduction of oxides for elemental extraction and zone refining for obtaining high purity metals. In additions we will demonstrate the possibility of developing glasses from lunar soil simulant for fixing nuclear waste from potential nuclear power generators on planetary bodies. Compositional analysis, x-ray diffraction patterns and differential thermal analysis of processed samples will be presented.

Sen, Subhayu↗
NASA NTRS2023

Magnetosonic ULF Waves With Anomalous Plasma–Magnetic Field Correlations: Standing Waves and Inhomogeneous Plasmas

Ultra-low frequency (ULF) wave observations across the heliosphere often rely on the sign of correlations between plasma (density/pressure) and magnetic field perturbations to distinguish between fast and slow magnetosonic modes. However, the assumptions behind this magnetohydrodynamic result are not always valid, particularly within the magnetosphere which is inhomogeneous and supports standing waves along the geomagnetic field. Through theory and a global simulation, we find both effects can result in anomalous plasma–magnetic field correlations. The interference pattern in standing waves can lead both body and surface magnetosonic waves to have different cross-phases than their constituent propagating waves. Furthermore, if the scale of gradients in the background are shorter than the wavelength or the waves are near-incompressible, then advection by the wave of inhomogeneities can overcome the wave's inherent sense of compression. These effects need to be allowed for and taken into account when applying the typical diagnostic to observations.

MHD Waves↗