Search NASA⌕ Search

SEARCH · Search NASA

Results for “Bond Strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Laser Shock Modeling Archival Discussion

The purpose of this discussion is to provide archival information related to the Laser Shock finite element modeling effort. As discussed in Laser Shock System, Assessing bond strength in layered materials (see Section 8.0), the Laser Shock System creates a high-amplitude shockwave on the frontside of a structure (i.e. an aluminum 6061-T6 plate for this discussion) via a high-energy pulsed laser. The shock wave is monitored on the back surface of the structure as a velocity time history. It is a compressive wave as it comes to the back surface but reflects as a tensile wave. If a bond exists in the structure and the reflected tensile wave exceeds its interface threshold stress, then bond rupture occurs. The desire of the Laser Shock effort is to establish (with multiple tests) an ultimate bond strength which can be used for fuel plate design calculations. In this process, the finite element modeling effort is the catalyst to mimic the Laser Shock tests and provide the damage information at the bond that is useful for fuel plate design calculations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2016

Nondestructive Evaluation of Adhesive Bonds via Ultrasonic Phase Measurements

The use of advanced composites utilizing adhesively bonded structures offers advantages in weight and cost for both the aerospace and automotive industries. Conventional nondestructive evaluation (NDE) has proved unable to reliably detect weak bonds or bond deterioration during service life conditions. A new nondestructive technique for quantitatively measuring adhesive bond strength is demonstrated. In this paper, an ultrasonic technique employing constant frequency pulsed phased-locked loop (CFPPLL) circuitry to monitor the phase response of a bonded structure from change in thermal stress is discussed. Theoretical research suggests that the thermal response of a bonded interface relates well with the quality of the adhesive bond. In particular, the effective stiffness of the adhesive-adherent interface may be extracted from the thermal phase response of the structure. The sensitivity of the CFPPLL instrument allows detection of bond pathologies that have been previously difficult-to-detect. Theoretical results with this ultrasonic technique on single epoxy lap joint (SLJ) specimens are presented and discussed. This technique has the potential to advance the use of adhesive bonds - and by association, advanced composite structures - by providing a reliable method to measure adhesive bond strength, thus permitting more complex, lightweight, and safe designs.

Haldren, Harold A.↗
NASA NTRS1990

Initial evaluation of continuous fiber reinforced NiAl composites

NiAl is being evaluated as a potential matrix material as part of an overall program to develop and understand high-temperature structural composites. Currently, continuous fiber composites have been fabricated by the powder cloth technique incorporating either W(218) or single crystal Al2O3 fibers as reinforcements in both binary NiAl and a solute strengthened NiAl(.05 at. pct Zr) matrix. Initial evaluation of these composite systems have included: fiber push-out testing to measure matrix/fiber bond strengths, bend testing to determine strength as a function of temperature and composite structure, and thermal cycling to establish the effect of matrix and fiber properties on composite life. The effect of matrix/fiber bond strength and matrix strength on several composite properties will be discussed.

Noebe, R. D.↗
DOE OSTI2026

Low-cost calculation and analysis of 2D IR spectra of model diiron trinitrosyl complexes in the NO stretch region with vibrational perturbation theory

Two-dimensional infrared spectroscopy offers unique capabilities for probing vibrational coupling in complex metal–ligand systems. In this paper, we combine two-dimensional infrared spectroscopy with vibrational perturbation theory to investigate vibrational coupling in a diiron trinitrosyl complex across three stable redox states. Although these systems are challenging for electronic structure methods, we demonstrate that key features of experimental 2D IR spectra can be accurately reproduced using reduced-dimensional anharmonic calculations with a small harmonic frequency scaling. Analysis reveals that N–O stretching modes maintain high locality across all redox states, with coupling patterns that directly reflect variations in Fe–N bond strength. Using curvilinear coordinate analysis, we demonstrate these differences result from systematic changes in cubic anharmonic force constants rather than mode delocalization. Our results establish N–O stretches as sensitive probes of metal–ligand bonding strength, expanding the toolkit for studying biologically relevant nitrosyl complexes.

Moran, Hayden A. [Texas A&M University, College St↗
DOE OSTI2021

Bond of steel-mortar interface interfered by stray current

Highlights: • The focus of this work is to present test results on the bond of steel-mortar interface undergoing stray current; • The bond strength is correlated to the electrochemical response of the steel-mortar interface; • The effects of duration of curing and starting point of stray current are also investigated; • This work also differentiates the effects of stray current on steel-mortar bond versus anodic polarization. The focus of this work is to present test results on the bond of steel-mortar interface undergoing stray current. The bond strength, derived by pull-out tests, is correlated to the electrochemical response of the steel rebar and the properties of the mortar bulk matrix. The effects of curing regimes (in terms of duration of curing) and starting point of stray current are also investigated. It is found that stray current exerts bond degradation of the steel-mortar interface in all investigated cases, irrespective of the presence or absence of a corrodent (Cl{sup −}) in the external medium. For the ease of operation in lab tests, the stray current is generally simulated by anodic polarization, although fundamentally, the stray current effect on the steel surface is composed of both anodic and cathodic polarizations. Hence this work also differentiates the effects of stray current on steel-mortar bond, versus the effects of anodic polarization.

36 MATERIALS SCIENCE↗
NASA NTRS2003

Bond Sensitivity to Silicone Contamination

Currently during fabrication of the Space Shuttle booster rocket motors, the use of silicone and silicone-containing products is prohibited in most applications. Many shop aids and other materials containing silicone have the potential, if they make contact with a bond surface, to transfer some of the silicone to the substrates being bonded. Such transfer could result in a reduction of the bond strength or even failure of the subsequent bonds. This concern is driving the need to understand the effect of silicones and the concentration needed to affect a given bond-line strength. Additionally, as silicone detection methods used for materials acceptance improve what may have gone unnoticed earlier is now being detected. Thus, realistic silicone limits for process materials (below which bond performance is satisfactory) are needed rather than having an absolute no silicone permitted policy.

Caldwell, G. A.↗
NASA NTRS1985

Comparison of Bond in Roll-bonded and Adhesively Bonded Aluminums

Lap-shear and peel test measurements of bond strength have been carried out as part of an investigation of roll bonding of 2024 and 7075 aluminum alloys. Shear strengths of the bonded material in the F temper are in the range of 14 to 16 ksi. Corresponding peel strengths are 120 to 130 lb/inch. These values, which are three to five times those reported in the literature for adhesively bonded 2024 and 7075, are a result of the true metallurgical bond achieved. The effects of heat-treating the bonded material are described and the improvements in bond strength discussed relative to the shear strength of the parent material. The significance of the findings for aerospace applications is discussed.

Schwensfeir, R. J., Jr.↗
DOE OSTI2020

Self-welding of Inconel 617 under high-pressure-high-temperature conditions for nuclear reactors

In response to continuously declining availability of fossil fuels, nuclear power has become an important alternative source of power generation. Growing application of nuclear power has relieved the shortage of electricity. However, it is also accompanied with new drawbacks, such as radioactive waste, and potential catastrophic consequences in case of major accidents. For nuclear power plants, severe accidents mostly originate from the reactor, making the reliability of the reactor of paramount importance to the overall safety of a nuclear power plant. Massive heat generation through nuclear fission/fusion and heat exchange render the whole reactor operating at extremely high temperatures (i.e., 900–1000 °C), which, in conjunction with large load from subsystems/ components made of special heavy alloys, renders the reactor under the risk of self-welding, a phenomenon that could lead to strong bonding between components and paralyze the operability of the nuclear reactor. This paper investigates the self-welding behavior of Inconel 617, a primary candidate nickel alloy for key components of the next generation gas cooled nuclear plant, inside a controlled atmospheric furnace with preset static load, simulating the high-pressure high-temperature conditions inside nuclear reactors. Therefore, test results show that Inconel 617 experiences self-welding through common oxide zone at the interface, and it has remarkable bonding strength, requiring 4114 N (57.15 MPa) and 4338 N (60.25 MPa) to break apart a mated sample pair, under an apparent contact pressure of 0.341 MPa after 50-h aging, in helium and air atmospheres, respectively. The higher oxygen presence in air results in slightly stronger oxide bond at the interface, compared to helium, and the bond strength increases with dwell time.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Selective modifiers for composite material property enhancement

A laminate comprising a first ply, a second ply, and a plurality of interfacial modifiers arranged between opposing faces of the first ply and the second ply. A chemical composition of an interfacial modifier of the plurality of interfacial modifiers can be selected based on a resulting bond strength between the interfacial modifier of the plurality of interfacial modifiers and at least one of the first ply or the second ply. The plurality of interfacial modifiers can be arranged in a pattern to selectively modify toughness of a portion of the laminate based on the bond strength of the interfacial modifier of the plurality of interfacial modifiers.

Briggs, Timothy↗
NASA NTRS1993

Thermal stability relationships between PMR-15 resin and its composites

A study was conducted to investigate the relationship between the thermo-oxidative stability of PMR-15 matrix resin and the stability of graphite-fiber-reinforced composites that contain this resin as the matrix material. Three areas were investigated. The first was the effect of fiber/matrix interfacial bond strength on the isothermal aging weight loss of composites. By using type-A graphite fibers produced by Hercules, it was possible to study composites reinforced with fibers that were processed to receive different surface treatments. One of the fibers was untreated, a second fiber was treated by oxidation to enhance fiber/matrix bonding, and the third type of fiber was coated with an epoxy sizing. These treatments produced three significantly different interfacial bond strengths. The epoxy sizing on the third fiber was quickly oxidized from the bare fiber surfaces at 288, 316, and 343 C. The weight loss due to the removal of the sizing was constant at 1.5 percent. This initial weight loss was not observed in thermo-oxidative stability studies of composites. The PMR-15 matrix satisfactorily protected the reinforcemnt at all three temperatures.

Bowles, Kenneth J.↗
NASA NTRS1990

Experimental observations and finite element analysis of the initiation of fiber microbuckling in notched composite laminates

A better understanding of the factors that affect the semi-circular edge-notched compressive strength is developed, and the associated failure mode(s) of thermoplastic composite laminates with multidirectional stacking sequences are identified. The primary variables in this investigation are the resin nonlinear shear constitutive behavior, stacking sequence (orientation of plies adjacent to the 0 degree plies), resin-rich regions between the 0 degree plies and the off-axis supporting plies, fiber/matrix interfacial bond strength, and initial fiber waviness. Two thermoplastic composite material systems are used in this investigation. The materials are the commercial APC-2 (AS4/PEEK) and a poor interface experimental material, AU4U/PEEK, designed for this investigation. Notched compression specimens are studied at 21, 77, and 132 C. Geometric and material nonlinear two-dimensional finite element analysis is used to model the initiation of fiber microbuckling of both the ideal straight fiber and the more realistic initially wavy fiber. The effects of free surface, fiber constitutive properties, matrix constitutive behavior, initial fiber curvature, and fiber/matrix interfacial bond strength on fiber microbuckling initiation strain levels are considered.

Guynn, E. Gail↗
NASA NTRS1974

Development of sputtered techniques for thrust chambers, task 1

Filler materials proposed for use in the sputter fabrication regeneratively cooled thrust chambers were evaluated. Low melting castable alloys, CERROBEND. CERROCAST, and CERROTRU, slurry applied SERMETEL 481 and flame-sprayed aluminum were investigated as filler materials. Sputter deposition from a cylindrical cathode inverted magnestron was used to apply an OFHC copper closeout layer to filled OFHC copper ribbed-wall cylindrical substrates. The sputtered closeout layer structure was evaluated with respect to filler material contamination, predeposition machining and finishing operations, and deposition parameters. The application of aluminum by flame-spraying resulted in excessiver filler porosity. Though the outgassing from this porosity was found to be detrimental to the closeout layer structure, bond strengths in excess of 10,500 psi were achieved. Removal of the aluminum from the grooves was readily accomplished by leaching in a 7.0 molar solution of sodium hydroxide at 353 K. Of the other filler materials evaluated, CERROTRU was found to be the most suitable material with respect to completely filling the ribbed-wall cylinders and vacuum system compatibility. However, bond contamination resulted in low closeout layer bond strength with the CERROTRU filler. CERROBEND, CERROCAST, and SERMETEL 481 were found to be unacceptable as filler materials.

Mullaly, J. R.↗
DOE OSTI2020

Promoting the cleavage of C-O bonds at the interface between a metal oxide cluster and a Co(0001) support

As a first step toward the rational design of Co-based catalysts with a higher activity and selectivity, we determine how one can activate a C-O bond at the interface between a metal oxide cluster and a Co(0001) support. The hypothesis here is that the metal ions in metal oxide clusters on a Co(0001) support enhance the adsorption of CO and weaken the C-O bond strength, which can then facilitate the dissociation of the CO reactant. To test this hypothesis, we developed three computational models of Ti4O8/Co(0001), Zr4O8/Co(0001), and Mn8O8/Co(0001). We quantify the CO adsorption behavior at the interface sites between an oxide cluster and the Co(0001) support as well as the corresponding IR spectra. We correlate the computed CO stretch frequencies with their CO adsorption energies, as well as the CO stretch frequency with the C-O bond length, and related these findings to the changes in the chemical bonding in the bound CO. The interface is the most favorable site for CO adsorption. Adsorption results in an increase of the C-O bond length and a decrease in its vibrational frequency. From a chemical bonding analysis, the bond order in CO at this site drops from 3 (in the gas phase) to 1. This decrease in bond order is a necessary precursor stage for CO dissociation. The experimental measurements of the corresponding FTIR spectra support this point. The favorability of CO adsorption at the interface sites is due to an electron transfer from the metal ion in the metal oxide cluster to the O atom in CO. We establish a linear relationship between C-O bond length and CO frequency and this relationship is found to be independent of the support, type of metal oxide cluster, or the adsorption site.

Fischer-Tropsch Synthesis, Heterogeneous Catalysis↗
NASA NTRS1989

Effect of bond thickness on fracture and fatigue strength of adhesively bonded composite joints

An experimental investigation of composite to composite bonded joints was undertaken to study the effect of bond thickness on debond growth rate under cyclic loading and critical strain energy release rate under static loading. Double cantilever beam specimens of graphite/epoxy adherends bonded with EC 3445 were tested under mode I loading. A different behavior of fracture and fatigue strength was observed with variation of bondline thickness.

Mall, S.↗
NASA NTRS1973

Design guidelines for use of adhesives in hybrid microcircuits

Although it is generally accepted that the use of adhesives in the assembly of hybrid microcircuits offers advantages over other bonding methods, there currently does not exist a set of guidelines for the selection of adhesives which will insure that hybrid microcircuits assembled with them will meet the long use-life, high-reliability requirements of electronic equipment for space applications. This study was directed to the identification of the properties of electrically insulative adhesives that potentially could cause problems in such an application, and to the development of evaluation tests to quantify these properties and thus form the basis for establishing suitable guidelines and, ultimately, specifications. Bond strength, outgassing after cure, and corrosivity were selected for detailed attention since they are considered to be especially critical. Introductory discussion includes enumeration and brief comments on the properties of adhesives considered to be important for the proposed application, a general review of polymeric types of adhesives, and identification of the major types of adhesives commercially available and specifically designed for microelectronic use. The specific tests developed to evaluate bond strength, outgassing after cure, and corrosivity are discussed in detail, and comparative results obtained for selected adhesives representative of the major types are given.

Caruso, S. V.↗
NASA NTRS2004

Sensitivity Studies for In-Situ Automated Tape Placement of Thermoplastic Composites

This modeling effort seeks to improve the interlaminate bond strength of thermoplastic carbon composites produced by the in-situ automated tape placement (ATP) process. An existing high productivity model is extended to lower values of the Peclet number that correspond to the present operating conditions of the Langley ATP robot. (The Peclet number is the dimensionless ratio of inertial to diffusive heat transfer.) In sensitivity studies, all of the process and material parameters are individually varied. The model yields the corresponding variations in the effective bonding time (EBT) referred to the glass transition temperature. According to reptation theory, the interlaminate bond strength after wetting occurs is proportional to the one-fourth power of EBT. The model also computes the corresponding variations in the thermal input power (TIP) and the mass and volumetric process rates. Process studies show that a 10 percent increase in the consolidation length results in a 20 percent increase in EBT and a 5 percent increase in TIP. A surprising result is that a 10 K decrease in the tooling temperature results in a 25 percent increase in EBT and an 8 percent increase in TIP. Material studies show that a 10 K decrease in glass transition temperature results in an 8 percent increase in EBT and a 8 percent decrease in TIP. A 20 K increase in polymer degradation temperature results in a 23 percent increase in EBT with no change in TIP.

Costen, Robert C.↗
DOE OSTI2026

The presence of Ru metal modifies the behavior of deuterium bound to pyridinic nitrogen in doped graphene-like materials

We used a combination of x-ray photoelectron spectroscopy (XPS) and density functional theory (DFT) to investigate how the presence of a ruthenium (Ru) metal substrate modifies the N-D bond strength of the pyridinic nitrogen species in nitrogen (N)-doped graphene (Gr) on Ru(0001) compared to metal-free highly-oriented pyrolytic graphite (HOPG) substrate. The N-dopants were introduced through low-energy N+/N2+ irradiation. N is embedded in the carbon materials in two predominant configurations: as graphitic N (GN: N substituted in the hexagonal C lattice) and pyridinic N (PN: substitutional N adjacent to a C vacancy). XPS data showed that upon atomic deuterium (D) exposure at 220 K, the PN peak shifted to a higher binding energy by +1.2 eV for HOPG and +1.0 eV for N-doped graphene on Ru(0001), while the GN peak remained unchanged, indicating that the D atoms bound solely to pyridinic N. 85% of PN sites on HOPG can be saturated with D atoms, whereas only ~30% of pyridinic N sites are able to bind D atoms in N-doped Gr/Ru(0001). Our DFT analysis shows that this difference is due to the coordination of PN to Ru atoms, which necessitates bond cleavage of the N-Ru interaction prior to D atom adsorption. D begins desorbing from N-HOPG at ~573 K and is fully desorbed by ~973 K, whereas desorption from N-doped graphene on Ru(0001) begins at ~290 K, with complete desorption observed at ~700 K, indicating that the Ru metal weakens the N-D bond strength. We also studied a high-surface-area, layered, and porous N-doped carbon material, internally labeled NC900, which was synthesized by pyrolysis of glucose and graphitic carbon nitride (g-C3N4) at 1173 K. D exposure caused a +1.1 eV PN peak shift in NC900, with no change in the GN peak. Moreover, the NC900 exhibited the same desorption behavior as HOPG, demonstrating that well-defined model systems can effectively capture the behavior of more complex N-doped carbon materials.

Alupothe Gedara, Buddhika S.↗
DOE OSTI2020

Controlling the corrosion resistance of multi-principal element alloys

Multi-principal element alloys (MPEAs) offer the possibility of many degrees of freedom in the choice of alloying elements to produce either single phase solid solutions or more complex multiphase microstructures. Large ranges of material properties have been observed for MPEAs and mastery of the selection of elements and their compositions can enable novel combinations of properties not possible in traditional alloys. From the aqueous corrosion perspective, optimization of phase stability, control of heterogeneities, passive film identity and its protectiveness, as well as substrate properties such as metal-metal bond strength and activation energy associated with dissolution, can all be controlling factors governed by alloy composition and structure. These factors can mediate the electrochemical reactions controlling spontaneous corrosion. The quest for superior properties based on well-informed element choice is suggested as a path forward guiding MPEA formulations for corrosion performance. However, gaps in fundamental knowledge exist regarding (a) the specific functions of each element, (b) the behavior of elements in unusual combinations, and (c) the formation of complex protective oxides. These issues currently hold back progress in optimization of corrosion properties.

Scully, John R.↗