SEARCH · Search NASA

Results for “CIRRUS OPTICAL DEPTH”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS1999

Radiative Forcing by Contrails

A parametric study of the instantaneous radiative impact of contrails is presented using three different radiative transfer models for a series of model atmospheres and cloud parameters. Contrails are treated as geometrically and optically thin plane parallel homogeneous cirrus layers in a static atmospheres The ice water content is varied as a function of ambient temperature. The model atmospheres include tropical, mid-latitude, and subarctic summer and winter atmospheres Optically thin contrails cause a positive net forcing at top of the atmosphere. At the surface the radiative forcing is negative during daytime. The forcing increases with the optical depth and the amount of contrail cover. At the top of the atmosphere a mean contrail cover of 0.1% with average optical depth of 0.2 to 0.5 causes about 0.01 to 0.03 W/m(exp 2)a daily mean instantaneous radiative forcing. Contrails cool the surface during the day and heat the surface during the night, and hence reduce the daily temperature amplitude The net effect depends strongly on the daily variation of contrail cloud cover. The indirect radiative forcing due to particle changes in natural cirrus clouds may be of the same magnitude as the direct one due to additional cover.

Meerkoetter, R.↗

NASA NTRS2004

Cirrus Clouds Optical, Microphysical and Radiative Properties Observed During Crystal-Face Experiment: I. A Radar-Lidar Retrieval System

A method of retrieving cloud microphysical properties using combined observations from both cloud radar and lidar is introduced. This retrieval makes use of an improvement to the traditional optimal estimation retrieval method, whereby a series of corrections are applied to the state vector during the search for an iterative solution. This allows faster convergence to a solution and is less processor intensive. The method is first applied to a synthetic cloud t o demonstrate its validity, and it is shown that the retrieval reliably reproduces vertical profiles of ice water content. The retrieval method is then applied to radar and lidar observations from the CRYSTAL-FACE experiment, and vertical profiles of ice crystal diameter, number concentration, and ice water content are retrieved for a cirrus cloud layers observed one day of that experiment. The validity of the relationship between visible extinction coefficient and radar reflectivity was examined. While synthetic tests showed such a functional relationship, the measured data only partially supported such a conclusion. This is due to errors in the forward model (as explained above) as well as errors in the data sets, including possible mismatch between lidar and radar profiles or errors in the optical depth. Empirical relationships between number concentrations and mean particle diameter were also examined. The results indicate that a distinct and robust relationship exists between these retrieved quantities and it is argued that such a relationship is more than an artifact of the retrieval process offering insight into the nature of the microphysical processes taking place in cirrus.

Mitrescu, C.↗

NASA NTRS2020

Sensitivities in Satellite Lidar‐Derived Estimates of Daytime Top‐of‐the‐Atmosphere Optically Thin Cirrus Cloud Radiative Forcing: A Case Study

An optically thin cirrus cloud was profiled concurrently with nadir‐pointing 1,064 nm lidars on 11 August 2017 over eastern Texas, including NASA's airborne Cloud Physics Lidar (CPL) and space‐borne Clouds and Aerosol Transport System (CATS) instruments. Despite resolving fewer (37% vs. 94%) and denser (i.e., more emissive) clouds (average cloud optical depth of 0.10 vs. 0.03, respectively), CATS data render a near‐equal estimate of the top‐of‐atmosphere (TOA) net cloud radiative forcing (CRF) versus CPL. The sample‐relative TOA net CRF solved from CPL is 1.39 W/m2, which becomes 1.32 W/m2 after normalizing by occurrence frequency. Since CATS overestimates extinction for this case, the sample‐relative TOA net forcing is ~3.0 W/m2 larger than CPL, with the absolute value reduced to within 0.3 W/m2 of CPL due its underestimation of cloud occurrence. We discuss the ramifications of thin cirrus cloud detectability from satellite and its impact on attempts at TOA CRF closure.

Erica K. Dolinar↗

NASA NTRS1990

Remote sensing over oceans of optically thin cirrus and its significance

The extinction characteristics of thin ice-crystal clouds over the oceanic convective rain belts in the tropics and midlatitudes, obtained from the infrared interferometer spectrometer flown on Nimbus 4 satellite in 1970 are examined. It is observed that the optical depth of these clouds in the RF window region is less than 3 and their spectral features are consistent with the cloud particle size of about 10 micron. These optically-thin ice-crystal clouds are extensions of the anvil clouds generated by deep convective systems. The existence of such clouds extending from the upper troposphere into the lower stratosphere in the polar regions during winter and early spring is indicated, and the result of a theoretical simulation are analyzed.

Cuddapah, Prabhakara↗

NASA NTRS1994

The three-dimensional structure of the infrared cirrus

This project was carried out over a period of four years, beginning 6/15/89 and continuing through 9/15/93. Intermediate results have been reported as poster papers at several meetings of the American Astronomical Society. A brief summary was presented in April 1993 at a symposium on the infrared cirrus. The final results were published in late 1993. The measurements have been deposited in NASA's Astronomical Data Center. Briefly, the results are as follows: Using the IRAS data base, we surveyed the 1808 06-B9.5 stars in the Bright Star Catalog for extended excess emission at 60 micrometers, indicating the presence of heated dust (cirrus hotspots) at the location of the star. Measurements of the angular size and infrared flux at 12, 25, 60 and 100 micrometers were obtained for 302 objects. From these basic data we calculated the radius, absorption, optical depth, color temperature, and dust density for each object. Arguing that the stars are randomly distributed point probes of the ISM, we showed that the filling factor of the dust-bearing component of the ISM is 14.6 + 2.4 percent within 400 pc of the sun for clouds with an equivalent hydrogen density greater than 0.5 cm(exp -3). Above a density of 1.0 cm(exp -3) the density distribution function appears to follow a power law of index -1.25. Further, we showed that the dust is distributed more sparsely in a region near the sun about 60 pc wide and extending several hundred parsecs in the direction of longitudes 80-260 deg. The distances to the dust clouds were determined from the spectroscopic parallaxes of the embedded stars; when the HIPPARCOS parallaxes become available, we will be able to produce a more accurate three-dimensional view of the local ISM.

Gaustad, John E.↗

NASA NTRS2009

Radiative Effects of African Dust and Smoke Observed from CERES and CALIOP Data

Cloud and aerosol effects have a significant impact on the atmospheric radiation budget in the Tropical Atlantic because of the spatial and temporal extent of desert dust and smoke from biomass burning in the atmosphere. The influences of African dust and smoke aerosols on cloud radiative properties over the Tropical Atlantic Ocean were analyzed for the month of July for three years (2006-2008) using collocated data collected by the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and Clouds and the Earth s Radiant Energy System (CERES) instruments on the CALIPSO and Aqua satellites. Aerosol layer height and type can be more accurately determined using CALIOP data, through parameters such as cloud and aerosol layer height, optical depth and depolarization ratio, than data from atmospheric imagers used in previous cloud-aerosol interaction studies. On average, clouds below 5 km had a daytime instantaneous shortwave (SW) radiative flux of 270.2 +/- 16.9 W/sq m and thin cirrus clouds had a SW radiative flux of 208.0 +/- 12.7 W/sq m. When dust aerosols interacted with clouds below 5 km, as determined from CALIPSO, the SW radiative flux decreased to 205.4 +/- 13.0 W/sq m. Similarly, smoke aerosols decreased the SW radiative flux of low clouds to a value of 240.0 +/- 16.6 W/sq m. These decreases in SW radiative flux were likely attributed to the aerosol layer height and changes in cloud microphysics. CALIOP lidar observations, which more accurately identify aerosol layer height than passive instruments, appear essential for better understanding of cloud-aerosol interactions, a major uncertainty in predicting the climate system.

Yorks, John E.↗

NASA NTRS2021

Modeling the Radiative Effect on Microphysics in Cirrus Clouds against Satellite Observations

The radiative effect on microphysics 23 (REM) plays an important role in the dew/frost formation near the surface. How REM impacts cirrus clouds is investigated in this paper, using bin microphysical model simulations and coincident data of the CloudSat and Global Precipitation Measurement (GPM) satellites. REM affects ice crystal spectrum with two types: radiative cooling and warming. Radiative cooling, as predicted by the bin model simulations, favors the formation of horizontally oriented ice crystals (HOICs), but radiative warming does not. Hence, a test of REM can be transformed to a test of HOICs, because HOICs can be measured by the microwave polarization observations of the GPM Microwave Imager (GMI) at 166 GHz. To analyze the GMI data for their HOIC distribution, clouds are sorted into four groups with different optical depth and altitude, based on the radiative cooling/warming ratio (or eta) computed with satellite-retrieved ice water content. Their HOIC distributions (e.g., the mid-level thick clouds have more HOICs than the high-level ones) agree well with those predicted by the bin model simulations. The general agreement between the GMI observations and bin model simulations suggests that REM is common in cirrus clouds and impacts cirrus clouds significantly.

microphysics↗

NASA NTRS2021

Modeling the Radiative Effect on Microphysics in Cirrus Clouds Against Satellite Observations

The radiative effect on microphysics (REM) plays an important role in the dew/frost formation near the surface. How REM impacts cirrus clouds is investigated in this study, using bin microphysical model simulations and coincident data of the CloudSat and Global Precipitation Measurement (GPM) satellites. REM affects ice crystal spectrum with two types: radiative cooling and warming. Radiative cooling, as predicted by the bin-model simulations, favors the formation of horizontally oriented ice crystals (HOICs), but radiative warming does not. Hence, a test of REM can be transformed to a test of HOICs, because HOICs can be measured by the microwave polarization observations of the GPM Microwave Imager (GMI) at 166 GHz. To analyze the GMI data for their HOIC distribution, clouds are sorted into four groups with different optical depth and altitude, based on the radiative cooling/warming ratio (or eta) computed with satellite-retrieved ice water content. Their HOIC distributions (e.g., the midlevel thick clouds have more HOICs than the high-level ones) agree well with those predicted by the bin-model simulations. The general agreement between the GMI observations and bin-model simulations suggests that REM is common in cirrus clouds and impacts cirrus clouds significantly.

clouds↗

NASA NTRS2012

Assessment of Global Cloud Datasets from Satellites: Project and Database Initiated by the GEWEX Radiation Panel

Clouds cover about 70% of the Earth's surface and play a dominant role in the energy and water cycle of our planet. Only satellite observations provide a continuous survey of the state of the atmosphere over the whole globe and across the wide range of spatial and temporal scales that comprise weather and climate variability. Satellite cloud data records now exceed more than 25 years in length. However, climatologies compiled from different satellite datasets can exhibit systematic biases. Questions therefore arise as to the accuracy and limitations of the various sensors. The Global Energy and Water cycle Experiment (GEWEX) Cloud Assessment, initiated in 2005 by the GEWEX Radiation Panel, provided the first coordinated intercomparison of publically available, standard global cloud products (gridded, monthly statistics) retrieved from measurements of multi-spectral imagers (some with multiangle view and polarization capabilities), IR sounders and lidar. Cloud properties under study include cloud amount, cloud height (in terms of pressure, temperature or altitude), cloud radiative properties (optical depth or emissivity), cloud thermodynamic phase and bulk microphysical properties (effective particle size and water path). Differences in average cloud properties, especially in the amount of high-level clouds, are mostly explained by the inherent instrument measurement capability for detecting and/or identifying optically thin cirrus, especially when overlying low-level clouds. The study of long-term variations with these datasets requires consideration of many factors. A monthly, gridded database, in common format, facilitates further assessments, climate studies and the evaluation of climate models.

Stubenrauch, C. J.↗

NASA NTRS1989

The 27-28 October 1986 FIRE IFO cirrus case study: Cirrus parameter relationships derived from satellite and lidar data

Cirrus cloud radiative and physical characteristics are determined using a combination of ground-based, aircraft, and satellite measurements taken as part of the First ISCCP Regional Experiment (FIRE) Cirrus Intensive Field Observations (IFO) during October and November 1986. Lidar backscatter data are used to define cloud base, center, and top heights and the corresponding temperatures. Coincident GOES 4 km visible (0.65 microns) and 8 km infrared window (11.5 microns) radiances are analyzed to determine cloud emittances and reflectances. Infrared optical depth is computed from the emittance results. Visible optical depth is derived from reflectance using a theoretical ice crystal scattering model and an empirical bidirectional reflectance mode. No clouds with visible optical depths greater than 5 or infrared optical depths less than 0.1 were used in the analysis. Average cloud thickness ranged from 0.5 km to 8 km for the 71 scenes. An average visible scattering efficiency of 2.1 was found for this data set. The results reveal a significant dependence of scattering efficiency on cloud temperature.

Minnis, Patrick↗

NASA NTRS1990

The 27-28 October 1986 FIRE IFO cirrus case study - Cirrus parameter relationships derived from satellite and lidar data

Minnis, Patrick↗

NASA NTRS2004

Initial Validation and Results of Geoscience Laser Altimeter System Optical Properties Retrievals

Verification of Geoscience Laser Altimeter System (GLAS) optical retrievals is . problematic in that passage over ground sites is both instantaneous and sparse plus space-borne passive sensors such as MODIS are too frequently out of sync with the GLAS position. In October 2003, the GLAS Validation Experiment was executed from NASA Dryden Research Center, California to greatly increase validation possibilities. The high-altitude NASA ER-2 aircraft and onboard instrumentation of Cloud Physics Lidar (CPL), MODIS Airborne Simulator (MAS), and/or MODIS/ASTER Airborne Simulator (MASTER) under-flew seven orbit tracks of GLAS for cirrus, smoke, and urban pollution optical properties inter-comparisons. These highly calibrated suite of instruments are the best data set yet to validate GLAS atmospheric parameters. In this presentation, we will focus on the inter-comparison with GLAS and CPL and draw preliminary conclusions about the accuracies of the GLAS 532nm retrievals of optical depth, extinction, backscatter cross section, and calculated extinction-to-backscatter ratio. Comparisons to an AERONET/MPL ground-based site at Monterey, California will be attempted. Examples of GLAS operational optical data products will be shown.

Hlavka, Dennis L.↗

NASA NTRS1989

Molecules in an infrared cirrus cloud

One of the clouds that form the Polar Loop was observed in the 1(sub 10)-1(sub 11) 4.8 GHz transition of formaldehyde and in J equal to 1-0 transitions of CO-12 and CO-13 at 115 and 110 GHz resp. The cloud consists of several filaments. From the correlation of IRAS 60 and 100 microns intensities a color temperature of the dust of 21 K and a maximum optical depth of 3 x 10(exp -4) were derived. At one local maximum of the 100 micron intensity, the hyperfine structure of formaldehyde could be resolved. Since the infrared optical depth is small, the 100 micron intensity can be used as a measure of dust column density.

Meyerdierks, Horst↗

NASA NTRS2013

The Collection 6 'dark-target' MODIS Aerosol Products

Aerosol retrieval algorithms are applied to Moderate resolution Imaging Spectroradiometer (MODIS) sensors on both Terra and Aqua, creating two streams of decade-plus aerosol information. Products of aerosol optical depth (AOD) and aerosol size are used for many applications, but the primary concern is that these global products are comprehensive and consistent enough for use in climate studies. One of our major customers is the international modeling comparison study known as AEROCOM, which relies on the MODIS data as a benchmark. In order to keep up with the needs of AEROCOM and other MODIS data users, while utilizing new science and tools, we have improved the algorithms and products. The code, and the associated products, will be known as Collection 6 (C6). While not a major overhaul from the previous Collection 5 (C5) version, there are enough changes that there are significant impacts to the products and their interpretation. In its entirety, the C6 algorithm is comprised of three sub-algorithms for retrieving aerosol properties over different surfaces: These include the dark-target DT algorithms to retrieve over (1) ocean and (2) vegetated-dark-soiled land, plus the (3) Deep Blue (DB) algorithm, originally developed to retrieve over desert-arid land. Focusing on the two DT algorithms, we have updated assumptions for central wavelengths, Rayleigh optical depths and gas (H2O, O3, CO2, etc.) absorption corrections, while relaxing the solar zenith angle limit (up to 84) to increase pole-ward coverage. For DT-land, we have updated the cloud mask to allow heavy smoke retrievals, fine-tuned the assignments for aerosol type as function of season location, corrected bugs in the Quality Assurance (QA) logic, and added diagnostic parameters such as topographic altitude. For DT-ocean, improvements include a revised cloud mask for thin-cirrus detection, inclusion of wind speed dependence in the retrieval, updates to logic of QA Confidence flag (QAC) assignment, and additions of important diagnostic information. At the same time as we have introduced algorithm changes, we have also accounted for upstream changes including: new instrument calibration, revised land-sea masking, and changed cloud masking. Upstream changes also impact the coverage and global statistics of the retrieved AOD. Although our responsibility is to the DT code and products, we have also added a product that merges DT and DB product over semi-arid land surfaces to provide a more gap-free dataset, primarily for visualization purposes. Preliminary validation shows that compared to surface-based sunphotometer data, the C6, Level 2 (along swath) DT-products compare at least as well as those from C5. C6 will include new diagnostic information about clouds in the aerosol field, including an aerosol cloud mask at 500 m resolution, and calculations of the distance to the nearest cloud from clear pixels. Finally, we have revised the strategy for aggregating and averaging the Level 2 (swath) data to become Level 3 (gridded) data. All together, the changes to the DT algorithms will result in reduced global AOD (by 0.02) over ocean and increased AOD (by 0.02) over land, along with changes in spatial coverage. Changes in calibration will have more impact to Terras time series, especially over land. This will result in a significant reduction in artificial differences in the Terra and Aqua datasets, and will stabilize the MODIS data as a target for AEROCOM studie

Aerosol retrieval algorithms↗

NASA NTRS1994

Microphysical modeling of cirrus. 2: Sensitivity studies

The one-dimensional cirrus model described in part 1 of this issue has been used to study the sensitivity of simulated cirrus microphysical and radiative properties to poorly known model parameters, poorly understood physical processes, and environmental conditions. Model parameters and physical processes investigated include nucleation rate, mode of nucleation (e.g., homogeneous freezing of aerosols and liquid droplets or heterogeneous deposition), ice crystal shape, and coagulation. These studies suggest that the leading sources of uncertainty in the model are the phase change (liquid-solid) energy barrier and the ice-water surface energy which dominate the homogeneous freezing nucleation rate and the coagulation sticking efficiency at low temperatures which controls the production of large ice crystals (radii greater than 100 mcirons). Environmental conditions considered in sensitivity tests were CN size distribution, vertical wind speed, and cloud height. We found that (unlike stratus clouds) variations in the total number of condensation nuclei (NC) have little effect on cirrus microphysical and radiative properties, since nucleation occurs only on the largest CN at the tail of the size distribution. The total number of ice crystals which nucleate has little or no relationship to the number of CN present and depends primarily on the temperature and the cooling rate. Stronger updrafts (more rapid cooling) generate higher ice number densities, ice water content, cloud optical depth, and net radiative forcing. Increasing the height of the clouds in the model leads to an increase in ice number density, a decrease in effective radius, and a decrease in ice water content. The most prominent effect of increasing cloud height was a rapid increase in the net cloud radiative forcing which can be attributed to the change in cloud temperature as well as change in cloud ice size distributions. It has long been recognized that changes in cloud height or cloud area have the greatest potential for causing feedbacks on climate change. Our results suggest that variations in vertical velocity or cloud microphysical changes associatd with cloud height changes may also be important.

Jensen, Eric J.↗

NASA NTRS1995

Remote sensing of cirrus cloud optical and microphysical properties using AVHRR data

The importance of understanding the radiative and microphysical properties of cirrus clouds in weather and climate research has been articulated by Liou (1986). This importance has also been recognized in view of the intensive field observations that have been conducted as a major component of the First ISCCP Regional Experiment (FIRE) in October-November 1986 (Starr 1987) and more recently in November-December 1991 (FIRE-II) as well as the European experiments on cirrus (ICE/EUCREX) that has been carried out in 1989. One of the fundamental objectives of the FIRE program has been and is to apply the field campaign and theoretical results to develop and verify improved techniques for the inference of cloud radiative and microphysical properties from satellite and surface-based data. A program is designed for the validation of the satellite retrived optical depth and mean effective ice crystal size utilizing in situ replicator observations for ice crystal size distributions and shapes. To minimize the effect of the horizontal size variability of the microphysical structure and the problem associated with collocation and coincidence, an averaging procedures was developed for both the satellite retrieved cloud parameters and the measured ice crystal data.

Liou, K. N.↗

NASA NTRS1995

Cloud Properties Derived From GOES-7 for Spring 1994 ARM Intensive Observing Period Using Version 1.0.0 of ARM Satellite Data Analysis Program

This document describes the initial formulation (Version 1.0.0) of the Atmospheric Radiation Measurement (ARM) program satellite data analysis procedures. Techniques are presented for calibrating geostationary satellite data with Sun synchronous satellite radiances and for converting narrowband radiances to top-of-the-atmosphere fluxes and albedos. A methodology is documented for combining geostationary visible and infrared radiances with surface-based temperature observations to derive cloud amount, optical depth, height, thickness, temperature, and albedo. The analysis is limited to two grids centered over the ARM Southern Great Plains central facility in north-central Oklahoma. Daytime data taken during 5 Apr. - 1 May 1994, were analyzed on the 0.3 deg and 0.5 deg latitude-longitude grids that cover areas of 0.9 deg x 0.9 deg and 10 deg x 14 deg, respectively. Conditions ranging from scattered low cumulus to thin cirrus and thick cumulonimbus occurred during the study period. Detailed comparisons with hourly surface observations indicate that the mean cloudiness is within a few percent of the surface-derived sky cover. Formats of the results are also provided. The data can be accessed through the World Wide Web computer network.

Minnis, Patrick↗

NASA NTRS1991

Optically thin cirrus clouds over oceans and possible impact on sea surface temperature of warm pool in western Pacific

Over the convectively active tropical ocean regions, the measurement made from space in the IR and visible spectrum have revealed the presence of optically thin cirrus clouds, which are quite transparent in the visible and nearly opaque in the IR. The Nimbus-4 IR Interferometer Spectrometer (IRIS), which has a field of view (FOV) of approximately 100 km, was utilized to examine the IR optical characteristics of these cirrus clouds. From the IRIS data, it was observed that these optically thin cirrus clouds prevail extensively over the warm pool region of the equatorial western Pacific, surrounding Indonesia. It is found that the seasonal cloud cover caused by these thin cirrus clouds exceeds 50 percent near the central regions of the warm pool. For most of these clouds, the optical thickness in the IR is less than or = 2. It is deduced that the dense cold anvil clouds associated with deep convection spread extensively and are responsible for the formation of the thin cirrus clouds. This is supported by the observation that the coverage of the dense anvil clouds is an order of magnitude less than that of the thin cirrus clouds. From these observations, together with a simple radiative-convective model, it is inferred that the optically thin cirrus can provide a greenhouse effect, which can be a significant factor in maintaining the warm pool. In the absence of fluid transports, it is found that these cirrus clouds could lead to a runaway greenhouse effect. The presence of fluid transport processes, however, act to moderate this effect. Thus, if a modest 20 W/sq m energy input is considered to be available to warm the ocean, then it is found that the ocean mixed-layer of a 50-m depth will be heated by approximately 1 C in 100 days.

Prabhakara, C.↗