Search NASA⌕ Search

SEARCH · Search NASA

Results for “COMPRESSED GASES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Benchmarking the Suitability of Novec$^{\mathrm{TM}}$ 4710 for Application in Flux Compression Generators

Here, an experimental study evaluated the feasibility of replacing traditional insulating gases such as SF 6 with C 4 F 7 N (3M TM , Novec 4710) in flux compression generator (FCG) applications. Currently available data indicate that Novec 4710 could offer certain performance benefits over SF 6 . However, the available literature is focused on low frequency (50–60 Hz) and dc at static pressures. To evaluate the performance of Novec 4710 under the pulsed dynamic pressure and temperature conditions found in an FCG, we report a performance comparison between three sets of identical FCGs using air, SF 6 , and Novec 4710 as the insulating gas. The generators used in this study had a single stage, directly seeded design with an armature diameter of 25 mm and a stator diameter of 46 mm. To highlight the performance of the different gases rather than any wire insulation, the stator was constructed with uninsulated wire. Furthermore, the generators were seeded aggressively, making the performance difference between the different gases more apparent. The performance was monitored with a pair of differential Rogowski coils that captured the generators’ di / dt while also using high-speed videography to capture possible gaseous breakdown signatures. The data gathered during this study indicate that Novec 4710 performs at least as well as SF 6 in FCG applications, if not significantly better.

42 ENGINEERING↗

Study of the interrelation between the electrotechnical parameters of the plasma focus discharge circuit and the plasma compression dynamics on the PF-3 and PF-1000 facilities

The main stages of the plasma current sheath (PCS) dynamics on two plasma focus (PF) facilities with different geometries of the electrode system, PF-3 (Filippov type) and PF-1000 (Mather type), were studied by analyzing the results of the current and voltage measurements. Some dynamic characteristics, such as the PCS velocity in the acceleration phase in the Mather-type facility (PF-1000), the moment at which the PCS reaches the anode end, and the plasma velocity in the radial stage of plasma compression in the PF-3 Filippov-type facility, were determined from the time dependence of the inductance of the discharge circuit with a dynamic plasma load. The energy characteristics of the discharge circuit of the compressing PCS were studied for different working gases (deuterium, argon, and neon) at initial pressures of 1.5–3 Torr in discharges with energies of 0.3–0.6 MJ. In experiments with deuterium, correlation between the neutron yield and the electromagnetic energy deposited directly in the compressed PCS was investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

THE TURBULENT DYNAMO IN HIGHLY COMPRESSIBLE SUPERSONIC PLASMAS

The turbulent dynamo may explain the origin of cosmic magnetism. While the exponential amplification of magnetic fields has been studied for incompressible gases, little is known about dynamo action in highly compressible, supersonic plasmas, such as the interstellar medium of galaxies and the early universe. Here we perform the first quantitative comparison of theoretical models of the dynamo growth rate and saturation level with three-dimensional magnetohydrodynamical simulations of supersonic turbulence with grid resolutions of up to 1024{sup 3} cells. We obtain numerical convergence and find that dynamo action occurs for both low and high magnetic Prandtl numbers Pm = ν/η = 0.1-10 (the ratio of viscous to magnetic dissipation), which had so far only been seen for Pm ≥ 1 in supersonic turbulence. We measure the critical magnetic Reynolds number, Rm{sub crit}=129{sub −31}{sup +43}, showing that the compressible dynamo is almost as efficient as in incompressible gas. Considering the physical conditions of the present and early universe, we conclude that magnetic fields need to be taken into account during structure formation from the early to the present cosmic ages, because they suppress gas fragmentation and drive powerful jets and outflows, both greatly affecting the initial mass function of stars.

79 ASTRONOMY AND ASTROPHYSICS↗

A new limiting procedure for discontinuous Galerkin methods applied to compressible multiphase flows with shocks and interfaces

Although the Discontinuous Galerkin (dg) method has seen widespread use for compressible flow problems in a single fluid with constant material properties, it has yet to be implemented in a consistent fashion for compressible multiphase flows with shocks and interfaces. Specifically, it is challenging to design a scheme that meets the following requirements: conservation, high-order accuracy in smooth regions and non-oscillatory behavior at discontinuities (in particular, material interfaces). Following the interface-capturing approach of Abgrall [1], we model flows of multiple fluid components or phases using a single equation of state with variable material properties; discontinuities in these properties correspond to interfaces. Here, to represent compressible phenomena in solids, liquids, and gases, we present our analysis for equations of state belonging to the Mie–Grüneisen family. Within the dg framework, we propose a conservative, high-order accurate, and non-oscillatory limiting procedure, verified with simple multifluid and multiphase problems. We show analytically that two key elements are required to prevent spurious pressure oscillations at interfaces and maintain conservation: (i) the transport equation(s) describing the material properties must be solved in a non-conservative weak form, and (ii) the suitable variables must be limited (density, momentum, pressure, and appropriate properties entering the equation of state), coupled with a consistent reconstruction of the energy. Further, we introduce a physics-based discontinuity sensor to apply limiting in a solution-adaptive fashion. We verify this approach with one- and two-dimensional problems with shocks and interfaces, including high pressure and density ratios, for fluids obeying different equations of state to illustrate the robustness and versatility of the method. Lastly, the algorithm is implemented on parallel graphics processing units (gpu) to achieve high speedup.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The CO-to-H{sub 2} conversion factor across the Perseus molecular cloud

We derive the CO-to-H{sub 2} conversion factor, X {sub CO} = N(H{sub 2})/I {sub CO}, across the Perseus molecular cloud on sub-parsec scales by combining the dust-based N(H{sub 2}) data with the I {sub CO} data from the COMPLETE Survey. We estimate an average X {sub CO} ∼ 3 × 10{sup 19} cm{sup –2} K{sup –1} km{sup –1} s and find a factor of ∼3 variations in X {sub CO} between the five sub-regions in Perseus. Within the individual regions, X {sub CO} varies by a factor of ∼100, suggesting that X {sub CO} strongly depends on local conditions in the interstellar medium. We find that X {sub CO} sharply decreases at A{sub V} ≲ 3 mag but gradually increases at A{sub V} ≳ 3 mag, with the transition occurring at A{sub V} where I {sub CO} becomes optically thick. We compare the N(H I), N(H{sub 2}), I {sub CO}, and X {sub CO} distributions with two models of the formation of molecular gas, a one-dimensional photodissociation region (PDR) model and a three-dimensional magnetohydrodynamic (MHD) model, tracking both the dynamical and chemical evolution of gas. The PDR model based on the steady state and equilibrium chemistry reproduces our data very well but requires a diffuse halo to match the observed N(H I) and I {sub CO} distributions. The MHD model matches our data reasonably well, suggesting that time-dependent effects on H{sub 2} and CO formation are insignificant for an evolved molecular cloud like Perseus. However, we find interesting discrepancies, including a broader range of N(H I), likely underestimated I {sub CO}, and a large scatter of I {sub CO} at small A{sub V} . These discrepancies most likely result from strong compressions and rarefactions and density fluctuations in the MHD model.

79 ASTRONOMY AND ASTROPHYSICS↗

Cryogenic Carbon Capture™ Technoeconomic Analysis

The Cryogenic Carbon Capture™ (CCC) process significantly decreases cost and energy demands for CO 2 separation and pressurization to 150 bar compared to alternatives. The process is a post-combustion technology that cools CO 2 -laden flue gas to desublimation temperatures (-100 to -135 °C), separates solid CO 2 —that forms from the flue gas—from the light gases, uses the cold products to cool incoming gases in a recuperative heat exchanger, compresses the solid/liquid CO 2 to final pressures (100–200 bar), and delivers a compressed CO 2 stream separated from an atmospheric pressure light-gas stream. The overall energy and economic costs are about 30-50% lower than most competing processes that involve air separation units (ASUs), solvents, or similar technologies. In addition, the CCC process enjoys several ancillary benefits, including (a) it is a minimally invasive Bolton technology, (b) it provides highly efficient removal of most pollutants (Hg, SOx, NO 2 , HCl, etc.), and (c) possible energy storage capacity. This report outlines the process details and economic and energy comparisons relative to other well-documented alternatives. This paper presents the results of a detailed techno-economic comparison of CCC with amine-based systems. The comparison uses identical financial and economic assumptions similar process assumptions as the detailed analyses published by US DOE in the greenfield analysis. Specifically, the comparison assumes power plants that produce the same net output, one equipped with and a second without carbon capture. Separately, the paper compares similar analyses for retrofitting existing systems using typical plant characteristics in the US (initial capital costs have been paid, high plant utilization), though there are no DOE estimates available for direct comparison. Financial and technical assumptions for all comparisons are maintained as close to the DOE reference studies as possible. The results demonstrate about 30-50% lower costs and energy demands for capture from greenfield coal plants. Natural gas plants produce substantially lower CO 2 concentrations which makes the cost of capturing a ton of CO 2 at the same capture rate as the coal plant higher for all processes while the cost of CO 2 capture per unit of power generation is lower. However, CCC maintains about the same absolute energy and cost advantages for NG as for coal compared to amine systems. Finally, the costs of retrofitting a station are compared to those of building a new station with and without capture. The retrofit costs are comparable to (slightly lower than) new plant costs without capture. In all cases operating and capital cost comparisons show that the CCC process can be retrofitted to a variety of plants to cost effectively reduce CO 2 emissions. Further process integration into the upstream processes and unique process features like water recovery, and integrated energy storage bring the effective cost of carbon capture using the CCC process down further and increase its advantages over alternatives. This technoeconomic analysis shows that the CCC process has the potential to the be lowest cost carbon capture technology under development today.

20 FOSSIL-FUELED POWER PLANTS↗

Experiments on shear layer mixing at hypervelocity conditions

Utilization of an expansion tube to acquire turbulent, compressible free shear layer data with gases of direct relevance to hypersonic combustion systems (nitrogen, hydrogen, and oxygen) is demonstrated. Visualizations of the free shear layer by laser holographic interferometry and schlieren imaging show a distinctly asymmetric growth rate that is highly preferential toward the lower speed (secondary stream) side. For the nitrogen/nitrogen case, for which the convective velocity was lowest and convective Mach number highest, the growth rate on the primary side was virtually zero until the mixing layer reached the opposite (secondary) wall.

Erdos, John↗

A Photographic Study of Combustion and Knock in a Spark-Ignition Engine

Report presents the results of a photographic study of the combustion in a spark-ignition engine using both Schlieren and flame photographs taken at high rates of speed. Although shock waves are present after knock occurs, there was no evidence of any type of sonic or supersonic compression waves existing in the combustion gases prior to the occurrence of knock. Artificially induced shock waves in the engine did not in themselves cause knock. The photographs also indicate that, although auto-ignition ahead of the flame front may occur in conjunction with knock, it is not necessary for the occurrence of knock. There is also evidence that the reaction is not completed in the flame front but continues for some time after the flame front has passed through the charge.

Rothrock, A M↗

Critical Technologies for Hypersonic Vehicle Development

The objective of the present RTO/VKI Lecture Series is to focus attention on the technologies that play a critical role in hypersonic vehicle development. Owing to the demanding flight environment, successful development of hypersonic vehicles will require progress in understanding and surmounting specific technical problems in ground test, numerical simulation and flight test. Following the introductory remarks stating the objectives of the Lecture Series, a historical perspective on hypersonic vehicle development was given to establish the context and to highlight the emerging role of numerical simulation in vehicle design. A thorough review of ongoing vehicle development and flight-test programs completed the introductory portion. To provide sufficient background information, lectures were presented on compressible flows of perfect and imperfect gases, with special attention given to shock-wave boundary-layer interactions, laminar to turbulent transition, and high temperature gas properties. Advancements in computational modeling capabilities for hypersonic vehicle design were addressed, and the ongoing need for validation data, as well as a consistent validation methodology, where highlighted. Specific critical technology areas, including trajectory aerothermal environment definition, system trade studies, propulsion systems, aerodynamic control laws, flight instrumentation, thermal protection systems and flight experiments were all addressed in separate lectures given by international experts. Finally, the potential of plasma devices to ameliorate or avoid critical aerothermal phenomena was presented, providing a good example of the type of creative effort required for achieving progress. In all of the presentations the needs of future hypersonic flight vehicle development programs were addressed.

Research and Technology Organisation (RTO)↗

2012 ARPA-E Energy Innovation Summit: Profiling Sheetak: Low Cost - Solid State Cooling

The third annual ARPA-E Energy Innovation Summit was held in Washington D.C. in February, 2012. The event brought together key players from across the energy ecosystem - researchers, entrepreneurs, investors, corporate executives, and government officials - to share ideas for developing and deploying the next generation of energy technologies. A few videos were selected for showing during the Summit to attendees. These "performer videos" highlight innovative research that is ongoing and related to the main topics of the Summit's sessions. Featured in this video are David Marcus, Founder of General Compression, and Eric Ingersoll, CEO of General Compression. Himanshu Pokharna, Vice President of Sheetak Uttam Ghoshal, President and CEO of Sheetak.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Filamentary pulse self-compression: The impact of the cell windows

Self-compression of multi-millijoule laser pulses during filamentary propagation is usually explained by the interplay of self-focusing and defocusing effects, causing a substantial concentration of energy on the axis of the propagating optical pulse. Recently, it has been argued that cell windows may play a decisive role in the self-compression mechanism. As such windows have to be used for media other than air their presence is often unavoidable, yet they present a sudden nonadiabatic change in dispersion and nonlinearity that should lead to a destruction of the temporal and spatial integrity of the light bullets generated in the self-compression mechanism. We now experimentally prove that there is, in fact, a self-healing mechanism that helps to overcome the potentially destructive consequences of the cell windows. We show in two carefully conducted experiments that the cell window position decisively influences activation or inhibition of the self-healing mechanism. A comparison with a windowless cell shows that the presence of this mechanism is an important prerequisite for the exploitation of self-compression effects in windowed cells filled with inert gases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hot-spot induced mild ignition: Numerical simulation and scaling analysis

Mild ignition is a 'non-ideal' autoignition process observed at some conditions in rapid compression machine, shock tube and flow reactor experiments where flames and/or reaction fronts initiate due to non-uniformities within the test mixture. These flames/fronts can consume the entire mixture, or compression-heat the unburned gas, causing bulk ignition at times earlier than in homogeneous environments. This study numerically investigates mild ignition features using computational fluid dynamics techniques under a scenario where a small hot-spot is employed to initiate the process in a spherically-symmetric geometry. Only subsonic regimes are considered. The intent is to develop greater fundamental understandings of competing phenomena, and formulate a robust framework to quantify the perturbative behavior. Syngas blends (CO/H 2 = 80/20) are employed as the fuel, mixed with air at lean fuel loadings of phi = 0.2 and 0.5, with the initial temperatures and pressures covering 900-1120K, and 1.5-15 bar, respectively. Hot-spots ranging from 50 to 2,000 mu m in diameter are utilized with temperatures elevated from the surroundings by 1 to 90%, i.e., T hot /T 0 =1.01-1.90. Scaling arguments are derived to analyze competing processes of: (a) quenching vs. ignition, (b) extinction vs. propagation, and (c) flame consumption/forced autoignition vs. homogeneous ignition. Here, this work provides new insight into non-uniform autoignition phenomena, and discusses opportunities and challenges associated with mitigating it. In particular, scaling arguments indicate that experimental parameters could have potential to either suppress hot-spot initiated flame formation (e.g., via bath gases with high thermal diffusivity), or avert flame compression of the end gas (e.g., via lean/diluted mixtures, or bath gases with high heat capacity).

42 ENGINEERING↗

High pressure Marinelli for counting low activity compressed gas samples

Quantification of low-activity noble gases in air is typically accomplished through separation of the noble gas from air followed by radiometric assay. Here, this work is aimed at quantification of radioactive noble gas in air without extraction. A high pressure aluminum Marinelli counting vessel was designed and fabricated that can be placed on a coaxial high purity germanium detector for gamma counting. Characterization of the performance of this Marinelli using MCNP modeling, large excesses of activity, and low-activity noble gas in air is discussed. Minimum detectable concentrations achieved during a 24 h count are: 5, 10, 50, and 1 Bq/m 3 for 133 Xe, 133m Xe, 131m Xe, and 135 Xe, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Dynamics of the plasma current sheath in plasma focus discharges in different gases

The shape of the plasma current sheath (PCS) in the final stage of its radial compression, the dynamics of pinching, and the subsequent pinch decay in plasma focus (PF) discharges in different gases are studied using an improved multichannel system of electron-optical plasma photography and a newly elaborated synchronization system. The PCS structure in discharges in heavy gases (Ne, Ar) is found to differ significantly from that in discharges in hydrogen and deuterium. The influence of a heavy gas (Xe) additive to hydrogen and deuterium on the structure and compression dynamics of the PCS is investigated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the Divergence of the Velocity Vector in Real-Gas Flow

A theoretical study was performed addressing the degree of applicability or inapplicability, to a real gas, of the occasionally stated belief that for an ideal gas, incompressibility is synonymous with a zero or very low Mach number. The measure of compressibility used in this study is the magnitude of the divergence of the flow velocity vector [V(bar) (raised dot) u (where u is the flow velocity)]. The study involves a mathematical derivation that begins with the governing equations of flow and involves consideration of equations of state, thermodynamics, and fluxes of heat, mass, and the affected molecular species. The derivation leads to an equation for the volume integral of (V(bar) (raised dot) u)(sup 2) that indicates contributions of several thermodynamic, hydrodynamic, and species-flux effects to compressibility and reveals differences between real and ideal gases. An analysis of the equation leads to the conclusion that for a real gas, incompressibility is not synonymous with zero or very small Mach number. Therefore, it is further concluded, the contributions to compressibility revealed by the derived equation should be taken into account in simulations of real-gas flows.

Bellan, Josette↗

An immersed boundary method for fluid–structure interaction with compressible multiphase flows

This paper presents a two-dimensional immersed boundary method for fluid–structure interaction with compressible multiphase flows involving large structure deformations. This method involves three important parts: flow solver, structure solver and fluid–structure interaction coupling. In the flow solver, the compressible multiphase Navier–Stokes equations for ideal gases are solved by a finite difference method based on a staggered Cartesian mesh, where a fifth-order accuracy Weighted Essentially Non-Oscillation (WENO) scheme is used to handle spatial discretization of the convective term, a fourth-order central difference scheme is employed to discretize the viscous term, the third-order TVD Runge–Kutta scheme is used to discretize the temporal term, and the level-set method is adopted to capture the multi-material interface. In this work, the structure considered is a geometrically non-linear beam which is solved by using a finite element method based on the absolute nodal coordinate formulation (ANCF). The fluid dynamics and the structure motion are coupled in a partitioned iterative manner with a feedback penalty immersed boundary method where the flow dynamics is defined on a fixed Lagrangian grid and the structure dynamics is described on a global coordinate. We perform several validation cases (including fluid over a cylinder, structure dynamics, flow induced vibration of a flexible plate, deformation of a flexible panel induced by shock waves in a shock tube, an inclined flexible plate in a hypersonic flow, and shock-induced collapse of a cylindrical helium cavity in the air), and compare the results with experimental and other numerical data. The present results agree well with the published data and the current experiment. Finally, we further demonstrate the versatility of the present method by applying it to a flexible plate interacting with multiphase flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗