Search NASA⌕ Search

SEARCH · Search NASA

Results for “Carbon use efficiency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Systematic Evaluation of Carbon Hosts for High-Energy Rechargeable Lithium-Metal Batteries

Rechargeable lithium batteries (RLBs) have attracted wide attention for achieving high energy and low cost, but the poor stability of the Li anode has remained as a large challenge. In the last several years, great efforts have been made to develop carbon anode structures for RLB applications. A wide range of carbon structures as well as many chemical modification strategies have been investigated to improve the Coulombic efficiency and extend the cycle life of the anodes or the cells. However, currently there is no clear conclusion on key factors that determine the performance of such the types of carbon structures due to the wide range of experimental conditions used in such studies. In this study, we systematically evaluated and compared the electrochemical properties of representative carbon anode materials as well as chemically functionalized carbon materials in different electrolytes. We have found that chemical functionalization, metallic loading, and the types of micro or nano-structures all have an effect on Li deposition/stripping process, but by far the most critical factor is the nature of the electrolytes. All carbon materials produced poor Coulombic efficiency and cycle life in conventional carbonate or ether-based electrolytes. However, when a Li metal compatible is used, the average Coulombic efficiency of Li metal deposition on all carbon structures is increased to 99% or higher. This study provides critical lessons on the directions for carbon anodes for RLBs. Based on these findings, we constructed Li metal coin cells using prelithiated hard carbon, LiNi0.6Mn0.2Co0.2O2 (NMC622) cathode, and compatible electrolyte and tested the cells under conditions of lean electrolyte, lean Li metal and high cathode loading required for more than 300 Wh kg-1 specific energy. More than 200 stable cycles were demonstrated with over 80% capacity retention. Furthermore, the existing challenges and potential approaches have been discussed to further extend the cyclability of lithium-metal batteries under practical conditions.

Liu, Yao↗
DOE OSTI2024

Responses of Marginal and Intrinsic Water-Use Efficiency to Changing Aridity Using FLUXNET Observations

According to classic stomatal optimization theory, plant stomata are regulated to maximize carbon assimilation for a given water loss. A key component of stomatal optimization models is marginal water-use efficiency (mWUE), the ratio of the change of transpiration to the change in carbon assimilation. Although the mWUE is often assumed to be constant, variability of mWUE under changing hydrologic conditions has been reported. However, there has yet to be a consensus on the patterns of mWUE variabilities and their relations with atmospheric aridity. We investigate the dynamics of mWUE in response to vapor pressure deficit (VPD) and aridity index using carbon and water fluxes from 115 eddy covariance towers available from the global database FLUXNET. We demonstrate a non-linear mWUE-VPD relationship at a sub-daily scale in general; mWUE varies substantially at both low and high VPD levels. However, mWUE remains relatively constant within the mid-range of VPD. Despite the highly non-linear relationship between mWUE and VPD, the relationship can be informed by the strong linear relationship between ecosystem-level inherent water-use efficiency (IWUE) and mWUE using the slope, m *. We further identify site-specific m * and its variability with changing site-level aridity across six vegetation types. We suggest accurately representing the relationship between IWUE and VPD using Michaelis–Menten or quadratic functions to ensure precise estimation of mWUE variability for individual sites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Increased activity of core photorespiratory enzymes and CO 2 transfer conductances are associated with higher and more optimal photosynthetic rates under elevated temperatures in the extremophile Rhazya stricta

Increase photorespiration and optimising intrinsic water use efficiency are unique challenges to photosynthetic carbon fixation at elevated temperatures. To determine how plants can adapt to facilitate high rates of photorespiration at elevated temperatures while also maintaining water-use efficiency, we performed in-depth gas exchange and biochemical assays of the C 3 extremophile, Rhazya stricta. These results demonstrate that R. stricta supports higher rates of photorespiration under elevated temperatures and that these higher rates of photorespiration correlate with increased activity of key photorespiratory enzymes; phosphoglycolate phosphatase and catalase. The increased photorespiratory enzyme activities may increase the overall capacity of photorespiration by reducing enzymatic bottlenecks and allowing minimal inhibitor accumulation under high photorespiratory rates. Additionally, we found the CO 2 transfer conductances (stomatal and mesophyll) are re-allocated to increase the water-use efficiency in R. stricta but not necessarily the photosynthetic response to temperature. These results suggest important adaptive strategies in R. stricta that maintain photosynthetic rates under elevated temperatures with optimal water loss. The strategies found in R. stricta may inform breeding and engineering efforts in other C 3 species to improve photosynthetic efficiency at high temperatures.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Electrifying High-Efficiency Future Communities: Impact on Energy, Emissions, and Grid

To combat climate change and meet decarbonization goals, the building sector is improving energy efficiency and electrifying end uses to reduce carbon emissions from fossil fuels. All-electric buildings are becoming a trend among new constructions, introducing opportunities for decarbonization but also technical challenges and research gaps. For instance, further investigation is needed to understand how the adoption of energy efficiency measures (EEMs) and distributed energy resources (DERs) in all-electric communities would affect energy consumption, carbon emissions, and grid planning. This paper presents a case study of a mixed-use, all-electric community located in Denver, Colorado. We use URBANopt TM , a physics-based urban energy modeling platform to model the community and then evaluate the impact of EEMs and DERs (i.e., photovoltaics [PV], electric vehicles [EVs], and batteries) on the community's energy usage, carbon emissions, and peak demand. The results show that adding EEMs and PV led to both energy consumption and carbon emissions reductions across all building types. However, we saw fairly limited impact of EEMs and PV on buildings' peak demand in our case. Additionally, due to overnight EV charging activities and higher grid carbon intensity at night, the carbon emissions in multifamily buildings have a noticeable increase compared to scenarios without vehicles. Finally, the addition of batteries helped reduce peak demand by 11%-29%. The modeling workflow and evaluation methods can be applied to similar communities to evaluate their performance and the effect of integrating EEMs and DERs.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Abstract for CRADA between National Energy Technology Laboratory and Eion Corp

The National Energy Technology Laboratory (NETL) and Eion Carbon (Participant) will collaborate on a lifecycle assessment (LCA) and techno-economic assessment (TEA) of Eion Carbon’s carbon dioxide (CO 2 ) removal process. Eion Carbon’s process removes atmospheric CO 2 using high efficiency, fast-weathering minerals applied on farmland. Eion Carbon’s patented direct measurement process delivers permanent, verifiable carbon removal and diverse environmental co-benefits. This collaboration with NETL aims to produce corroborated assessment reports that will play an instrumental role in follow on funding applications and customer evaluations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Contrasting growth responses of Qilian juniper ( Sabina przewalskii ) and Qinghai spruce ( Picea crassifolia ) to CO2 fertilization despite common water-use efficiency increases at the northeastern Qinghai–Tibetan plateau

Abstract Rising atmospheric carbon dioxide (CO2) may enhance tree growth and mitigate drought impacts through CO2 fertilization. However, multiple studies globally have found that rising CO2 has not translated into greater tree growth despite increases in intrinsic water-use efficiency (iWUE). The underlying mechanism discriminating between these two general responses to CO2 fertilization remains unclear. We used two species with contrasting stomatal regulation, the relatively anisohydric Qilian juniper (Sabina przewalskii) and the relatively isohydric Qinghai spruce (Picea crassifolia), to investigate the long-term tree growth and iWUE responses to climate change and elevated CO2 using tree ring widths and the associated cellulose stable carbon isotope ratios (δ13C). We observed a contrasting growth trend of juniper and spruce with juniper growth increasing while the spruce growth declined. The iWUE of both species increased significantly and with similar amplitude throughout the trees’ lifespan, though the relatively anisohydric juniper had higher iWUE than the relatively isohydric spruce throughout the period. Additionally, with rising CO2, the anisohydric juniper became less sensitive to drought, while the relatively isohydric spruce became more sensitive to drought. We hypothesized that rising CO2 benefits relatively anisohydric species more than relatively isohydric species due to greater opportunity to acquire carbon through photosynthesis despite warming and droughts. Our findings suggest the CO2 fertilization effect depends on the isohydric degree, which could be considered in future terrestrial ecosystem models.

Wang, Wenzhi↗
DOE OSTI2022

Continuous electrocoagulation-membrane distillation unit for treating hydraulic fracturing produced water

Hydraulic fracturing oil and gas produced water is frequently highly impaired. While it is often deep well injected, there is great interest in treating this water for beneficial uses. Given the complexity of these produced waters, multiple unit operations are necessary. Electrocoagulation has been considered as a promising pretreatment technology. Here electrocoagulation is considered as a pretreatment prior to membrane distillation. The focus of this work is on understanding the electrocoagulation process in order to design an integrated unit operation. Electrocoagulation is used to remove organic compounds that will foul the membrane leading to membrane failure during membrane distillation. Using aluminum or iron electrodes, half-cell reactions in the electrocoagulation cell and electrode potentials have been calculated. Electrocoagulation was conducted using a continuous electrocoagulation reactor with actual produced water using aluminum, iron or mixed aluminum and iron electrodes. Here, the results obtained here indicate that electrocoagulation can obtain good removal efficiency of total organic carbon (TOC) by using different reaction conditions. Removal of organic compounds is essential to minimize fouling during membrane distillation. Further the performance of the electrocoagulation process depends strongly on the quality of the feed water. Insoluble species were more effectively coagulated than dissolved organic species. Continuous electrocoagulation shows great potential as a scalable unit operation for pretreating hydraulic fracturing produced water.

42 ENGINEERING↗
DOE OSTI2020

Smart Composite Pressure Vessels (SCPV) with Integrated Health Monitoring

The U.S. Department of Energy (DOE) is promoting and developing more energy efficient and environmentally friendly technologies that will enable America to use less petroleum. Hydrogen fuel cells – which directly convert the chemical energy in hydrogen to electricity with only water and heat as byproducts – are a very attractive solution that can enable this to happen. To date, DOE's efforts have culminated in commercial demonstration of on-board vehicular hydrogen storage systems that can allow for a driving range of greater than 300 miles. This requires storing 5 Kgs of hydrogen onboard a light vehicle. In order to store this quantity of hydrogen, the hydrogen gas needs to be stored in a composite overwrapped pressure vessel (COPV) at a very high internal pressure. The objective of the program was to demonstrate continuous and predictable health-monitoring of composite pressure vessels. A higher confidence in the operational safety of the vessels will lead to reduced burst factor of safety imposed by regulatory standards and hence will help reduce the structural wall thickness that drives the cost of the vessel. Highly optimized Type III (metal lined) and Type IV (polymer lined) COPVs that are manufactured using filament winding process have been designed and qualified for the above mentioned application. However, the main structural component of the COPVs is carbon fiber and the high cost of carbon fiber composite in a pressure vessel is a primary challenge in reducing the cost of gaseous hydrogen storage. Continuous and remote monitoring of structural health of the COPVs as well as optimization of the strength translation of carbon fibers have the potential to allow for reduced factor of safety, thereby reduced amount of carbon and associated cost of the vessel. In the current program, the project team including Steelhead Composites (SHC), University of Tennessee, Knoxville (UTK), Teijin Carbon America, Oak Ridge National Laboratory (ORNL) and LUNA designed, fabricated, and tested smart composite pressure vessels with integrated sensors. Iterative loops of design and testing using coupons, subscale STEB vessels and full size vessels proved that a new generation of high performance carbon fiber can be used for efficient design of Type 3 vessels for H2 storage. Novel analysis techniques were developed to predict the initiation and propagation of interlaminar damage inside the composite shell due to impact damage, a real threat in practical operation. Such an analysis scheme is typically not used in tank design but is an essential tool for health monitoring of composite vessels. Remote sensing of the key signatures of the tank’s operating parameters such as pressure, acceleration and humidity was demonstrated using a unique device that can wirelessly transmit and stream the data to a remote server. Fiber optic sensors were successfully integrated during fabrication of the tanks. These sensors provide a wealth of information regarding the structural health of the vessel when it is subsequently pressurized or subjected to impact damage. Excellent correlation was demonstrated between the fiber optic sensor and mechanical strain gage data, and between the measurements and analytical predictions.

08 HYDROGEN↗
DOE OSTI2021

CO 2 Chemisorption Behavior of Coordination-Derived Phenolate Sorbents

CO 2 chemisorption via C-O bond formation is an efficient methodology in carbon capture especially using phenolate-based ionic liquids (ILs) as the sorbents to afford carbonate products. However, most of the current IL systems involve alkylphosphonium cations, leading to side reactions via the ylide intermediate pathway. It is important to figure out the CO 2 chemisorption behavior of phenolate-derived sorbents using inactive and easily accessible cation counterparts without active protons. Herein, phenolate-based systems were constructed via coordination between alkali metal cations with crown ethers to avoid the participation of active protons in CO 2 chemisorption. Reaction pathway study revealed that CO 2 uptake could be achieved by O-C bond formation to afford carbonate. CO 2 uptake capacity and reaction enthalpy were significantly influenced by the coordination effect, alkali metal types, and alkyl groups on the benzene ring.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Engineering quantitative stomatal trait variation and local adaptation potential by cis‐regulatory editing

Summary Cis‐regulatory element editing can generate quantitative trait variation that mitigates extreme phenotypes and harmful pleiotropy associated with coding sequence mutations. Here, we applied a multiplexed CRISPR/Cas9 approach, informed by bioinformatic datasets, to generate genotypic variation in the promoter ofOsSTOMAGEN, a positive regulator of rice stomatal density. Engineered genotypic variation corresponded to broad and continuous variation in stomatal density, ranging from 70% to 120% of wild‐type stomatal density. This panel of stomatal variants was leveraged in physiological assays to establish discrete relationships between stomatal morphological variation and stomatal conductance, carbon assimilation and intrinsic water use efficiency in steady‐state and fluctuating light conditions. Additionally, promoter alleles were subjected to vegetative drought regimes to assay the effects of the edited alleles on developmental response to drought. Notably, the capacity for drought‐responsive stomatal density reprogramming instomagenand two cis‐regulatory edited alleles was reduced. Collectively our data demonstrate that cis‐regulatory element editing can generate near‐isogenic trait variation that can be leveraged for establishing relationships between anatomy and physiology, providing a basis for optimizing traits across diverse environments.

Biotechnology & Applied Microbiology↗
DOE OSTI2022

Industrial Decarbonization of Energy Intensive Sectors

Industrial Decarbonization is the phasing out of atmospheric greenhouse gas (GHG) emissions from all aspects of the industrial sector. There are a number of industrial decarbonization strategies, including energy efficiency, electrification, the use of low carbon fuels, and carbon capture.

Chemical Manufacturing, Petroleum Refining, Iron a↗
DOE OSTI2026

Multiplexed Inertial Coalescence Filters for High-Rate Liquid-Gas Chemistry

The aim of this project is to support the development of a disruptive method for deploying liquids in liquid-gas chemical processes to transform carbon dioxide capture from flue gas and ambient air streams. The proposed project is based on the development of a novel filtration method called the Helix MICRA™ (Multiplexed Inertial Coalescence Refining Apparatus) filters. Helix MICRA™ filters are a novel, patented filter that enable high efficiency, low-pressure drop capture of droplet streams. Liquid droplets have a large net-surface area per unit volume and have correspondingly rapid mass transfer rates. By effectively capturing these droplets after deployment, we enable high-rate carbon dioxide capture from air streams unlike any other technology. This project aims at using Helix MICRA™ filters to create efficient and compact carbon dioxide capture systems that would dramatically reduce system size and capital costs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Tailoring Cementitious Materials Towards Value-Added Use of Large CO 2 Volumes

Hydraulic cements with alternative chemistries were developed for large-volume and value-added use of carbon dioxide. The hydraulic cements were processed using the energy-efficient mechanochemical technique at room temperature and atmospheric pressure. Carbon dioxide was captured directly from combustion emissions during processing. For this purpose, mechanochemical processing of hydraulic cements was accomplished under a flow of combustion emissions prior to the release of emissions to the atmosphere. The process removed a significant fraction of carbon dioxide from combustion emissions. The hydraulic cements captured carbon dioxide at about 10% of their weight. Two hydraulic cement chemistries were developed, and their mechanochemical processing was successfully scaled-up. The characteristic feature of one chemistry was its relatively low (near-neutral) pH where the integration of carbon dioxide yielded clear value. The second cement chemistry was based on alkali activation of industrial wastes. This chemistry could make value-added use of carbon dioxide, but it had to be refined to control the pH drop caused by CO 2 integration. These two cements render binding effects upon hydration by forming a combination of stable carbonates and aluminosilicates or phosphates. Efforts to develop cement chemistries based solely on carbonates were not successful. The mechanochemical process was found to integrate carbon dioxide into the alternative cement chemistries in the form of disordered and metastable carbonates. During hydration reactions, the disordered/metastable carbonates are either transformed into stable carbonate phases with desired binding efforts, or carbonates get integrated into the primary inorganic binders (hydrates). When compared with mechanochemical processing in pure carbon dioxide, mechanochemical processing in combustion emissions produced hydraulic cements with improved engineering properties. The mechanochemical process was scaled-up, and its variables as well as the raw materials formulations were optimized for implementation at pilot scale. Scale-up was found to enhance the carbon capture potential and the engineering qualities of the resulting hydraulic cements. This was because scale-up raises the intensity of mechanical energy input to raw materials. Certain mechanochemical phenomena cannot be induced, irrespective of the cumulative mechanical energy input, unless the intensity of impact is raised above a minimum level that cannot be achieved in laboratory-scale implementation of the process. Due to this effect, the duration of the mechanochemical process as well as its energy demand could be reduced significantly (by an order of magnitude) upon transition from laboratory to pilot scale, with the hydraulic cements produced at pilot scale offering engineering properties that were superior to those realized in laboratory-scale mechanochemical processing. The hydraulic cements produced at pilot scale via mechanochemical processing under a flow of combustion emissions were thoroughly characterized. They were found to meet standard requirements for ‘General Use’ hydraulic cements. They were compatible with the industrial-scale concrete production and construction practices that are used with the currently prevalent hydraulic cements. The new hydraulic cements with integrated carbon dioxide were found to offer distinct advantages over the currently prevalent Portland cement in terms of net carbon footprint and energy content. The combined raw materials and energy costs of the new hydraulic cements are competitive, and major cost savings can be realized because of the simplified production process that significantly lowers the capital investment in cement production plants. Mechanochemical processing of the new hydraulic cements under a flow of combustion emissions can be implemented using some existing components of cement manufacturing plants; this facilitates adoption of the technology by the cement industry.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Cost and life cycle analysis for deep CO 2 emissions reduction of steelmaking: Blast furnace-basic oxygen furnace and electric arc furnace technologies

Iron and steel manufacturing is the largest contributor to CO 2 emissions among heavy industries worldwide. This is mostly due to the use of coal in blast furnace-basic oxygen furnace (BF-BOF) process for virgin (primary) steel production. The electricity generation mix used in the electric arc furnace (EAF) process to recycle scrap steel also contributes to the CO 2 emission associated with secondary steel production. To decarbonize iron and steel sector, we investigated decarbonization options for BF-BOF and EAF processes, including energy efficiency, carbon capture and storage, and the use of clean energy sources, in various BF-BOF and EAF process configurations. Additionally, for each decarbonization approach, we evaluated the CO 2 reduction potential via life cycle analysis (LCA) and estimated the associated cost through techno-economic analysis (TEA). A typical U.S. BF-BOF for virgin steel production has a cradle-to-gate (CTG) CO 2 emissions of 1,990 kg/MT steel with a levelized cost of steel (LCOS) of $\$439$/MT steel, while a typical U.S. EAF process for secondary steel production in the United States has a CTG CO 2 emissions of 270 kg/MT steel with a LCOS of $\$365$/MT steel. Combining renewable energy sources and carbon capture, BF-BOF CTG CO 2 emissions can be reduced to 16 kg/MT steel, and EAF configurations can achieve similar deep reductions to reach 25 kg/MT steel. The corresponding LCOS with these decarbonization levels is estimated to increase to $\$542$/MT steel and $\$348$/MT steel, respectively. The estimated CO 2 avoidance costs vary from -$\$90$/MT CO 2 to $\$646$/MT CO 2 , depending on the various decarbonization technologies and energy prices.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2023

An algal-bacterial symbiotic system of carbon fixation using formate as a carbon source

The commercial implementation of algal cultures for efficient capture of CO 2 from fossil-derived flue gases is not a reality yet due to several major challenges, particularly low gas-liquid mass transport efficiency along with loss of productivity due to pests. This study has explored an algal-bacterial symbiotic system to utilize formate as a carbon source. The algal-bacterial assemblage, after a 400-day adaptive evolution using the formate medium, has demonstrated a new capability to assimilate both formate and CO 2 to promote biomass production. The formate tolerant culture system also addresses CO 2 mass transfer limitation under high light conditions. Continuous cultivation of the assemblage on formate led to a carbon capture efficiency of 90 % with a biomass concentration of 0.92 g L -1 and biomass productivity of 0.31 g L -1 day -1 , and the system did not require CO 2 aeration. In addition, 13 C isotope tracing, proteomics, and microbial community analysis reveal a uniquely evolved community for formate utilizations and robust biomass synthesis, in which Chlorella sorokiniana is a dominant phototroph companying with highly diverse bacterial subpopulations. In the presence of formate, evidence has shown that Chlorella is able to form mutualism with formate utilizing bacteria in semi-continuous cultures, leading to a highly effective photomixotrophic metabolism. Furthermore, this study demonstrates a new route of using electrochemical-derived formate to support mutualistic algae-bacteria biorefinery while the formate as an alternative carbon source could repel pests for outdoor algal cultivations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Alkaline Ethanol Oxidation Reaction on Carbon Supported Ternary PdNiBi Nanocatalyst using Modified Instant Reduction Synthesis Method

Direct ethanol fuel cells (DEFC) still lack active and efficient electrocatalysts for the alkaline ethanol oxidation reaction (EOR). In this work, a new instant reduction synthesis method was developed to prepare carbon supported ternary PdNiBi nanocatalysts with improved EOR activity. Synthesized catalysts were characterized with a variety of structural and compositional analysis techniques in order to correlate their morphology and surface chemistry with electrochemical performance. The modified instant reduction synthesis results in well-dispersed, spherical Pd85Ni10Bi5 nanoparticles on Vulcan XC72R support (Pd85Ni10Bi5/C(II-III)), with sizes ranging from 3.7 +/- 0.8 to 4.7 +/- 0.7 nm. On the other hand, the common instant reduction synthesis method leads to significantly agglomerated nanoparticles (Pd85Ni10Bi5/C-(I)). EOR activity and stability of these three different carbon supported PdNiBi anode catalysts with a nominal atomic ratio of 85:10:5 were probed via cyclic voltammetry and chronoamperometry using the rotating disk electrode method. Pd85Ni10Bi5/C-(II) showed the highest electrocatalytic activity (150 mA.cm(-2); 2678 mA.mg(-1)) with low onset potential (0.207 V) for EOR in alkaline medium, as compared to a commercial Pd/C and to the other synthesized ternary nanocatalysts Pd85Ni10Bi5/C-(I) and Pd85Ni10Bi5/C-(III). This new synthesis approach provides a new avenue to developing efficient, carbon supported ternary nanocatalysts for future energy conversion devices. The modified instant reduction method for synthesis of ternary Pd85Ni10Bi5/C-(II) nanocatalyst using Vulcan XC72R as carbon support initiates an agglomeration reduction, provides low average particle size, and enables enhanced activity for the alkaline ethanol oxidation reaction (EOR) compared to the common instant reduction method and to a commercial Pd/C catalyst.

Alkaline direct ethanol fuel cell↗