Search NASA⌕ Search

SEARCH · Search NASA

Results for “Cementitious material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Immobilizing Pertechnetate in Ettringite via Sulfate Substitution

Until recently, a nuclear waste form did not exist for the immobilization and long-term storage of the anionic form of radionuclide technetium-99 (99Tc), pertechnetate (TcO 4 - ). Across international nuclear waste sites, the inability to capture TcO 4 - poses a threat to the local environment due to the anion’s long half-life and environmental mobility under environmentally oxic conditions. To combat this challenge, most waste forms would capture 99Tc using materials that reduce TcO 4 - to Tc(IV) species, e.g. 99Tc oxides or 99Tc sulfides. However, this is a short-lived solution unless reducing capacities can be regenerated to last over the long life expectancy of some nuclear waste forms (~10,000 years). In light of recent experimental observations gained from the development of cementitious waste forms and unconfirmed hypotheses from the literature, this work explores how ettringite, a common mineral formed in cementitious materials with demonstrated success in incorporating oxyanions, may be used to immobilize TcO 4 - directly and over the life-time of the waste form. Using batch precipitation experiments, solid phase characterization techniques, and ab initio molecular dynamics simulations, we demonstrate herein successful incorporation of TcO 4 - into ettringite via substitution for SO 4 2- within the ettringite crystal structure. Here, these results are first of their kind and confirm the hypothesis that ettringite acts as an immobilizing mineral within cementitious waste forms for the highly mobile TcO 4 - oxyanion, enhancing the overall performance of these waste forms over time.

36 MATERIALS SCIENCE↗

Physical and chemical effects of isopropanol exchange in cement-based materials

Drying cement-based materials is a necessary step to characterize the microstructure by microscopy, adsorption, or mercury intrusion. The isopropanol (IPA) exchange method is commonly used to replace the pore solution prior to drying, as it reduces the capillary pressure and thereby helps to preserve the microstructure of the hydrated cementitious materials. However, some physical and chemical effects of IPA on hydration products have been reported. These effects cannot be completely avoided, but can be reduced by shortening the exchange duration, in particular for effects on ettringite. This study carried out experiments with different exchange durations and IPA removal techniques to address research gaps in the literature. For 1-mm cubes of cement paste with IPA diffusion coefficient of 1 × 10{sup −11} m{sup 2}/s, the compared exchange durations are 5 min, 15 min (value from the literature), 40 min (when the mixture at the sample center achieves 95% of the drop in surface tension from water to IPA), 80 min (when the IPA/water mixture at the sample center reaches an azeotrope), 5 h (when over 99% IPA is replaced at the sample center), and 24 h (prolonged exchange). After IPA exchange, samples were either directly dried at 40 °C with flushing N{sub 2} or washed by diethyl ether prior to N{sub 2} drying. Even though the exchange duration of 40 and 80 min, in theory, can reduce the damage from capillary pressure, the nitrogen adsorption results do not show any advantage in preventing microstructural alteration. The 5-h exchange provided results similar to the 24-h exchange, but the latter induced slightly more serious chemical effects resulting from the longer contact of IPA with hydration products. In addition, the compared IPA removal techniques do not show significant differences. Therefore, this study suggests using small samples (~1 mm) for microstructural studies following IPA exchange for a period corresponding to the time when 99% of the water (mole fraction) at the sample center is replaced.

36 MATERIALS SCIENCE↗

The Cost of Scaling Up in Large-Format Additive Manufacturing

Additive manufacturing (AM) of large objects has, over the last decade, required the scaling of existing material extrusion processes. The current generation of large-scale printers are primarily gantry robots with high-throughput extrusion systems. With workspaces approaching 50 m 3 , these printers have pushed the boundaries of achievable print volume while allowing the utilization of low-cost feedstocks, such as cementitious materials and polymer pellets, like those used in injection molding. Continued workspace expansion requires an examination of the inherent trade-offs, which impact capital and operational costs. Here, in this work, the authors examine these trade-offs to determine fundamental scaling laws for existing system architectures, survey the state of the art for alternative system configurations, and pose recommendations for future system designers to continue the evolution of large-scale AM systems.

3D printing↗

Hydration behavior of cements with reduced clinker factor in mixture with sulfoaluminate binder

CO{sub 2} regulation and raw material availability will strongly influence the future cement market and a wider use of composite cements containing limestone and pozzolan or slag is expected. In the present paper, the possibility to combine Portland cements (PCs) with reduced clinker factor with sulfoaluminate cement (CSA), is explored. Low Portland clinker cements are prepared in laboratory using different supplementary cementitious materials (limestone, slag, pozzolan and fly ash) and mixed with a sulfoaluminate cement: the hydration behavior of the resulting binders is investigated up to 90 days through a multi-technique approach involving X-ray diffraction, differential scanning calorimetry and nuclear magnetic resonance spectroscopy. Understanding the interaction mechanisms between SCMs and CSA/PC blends will support the development of innovative high performing binders based on CEM III or CEM V, or even on new standardized CEM II. Results highlight that slag is particularly suitable promoting late strength development.

36 MATERIALS SCIENCE↗

Resiliency of Degraded Built Infrastructure

Infrastructure resiliency depends on the ability of infrastructure systems to withstand, adapt, and recover from chronic and extreme stresses. In this white paper, we address the resiliency of infrastructure assets and discuss improving infrastructure stability through development of our understanding of cement and concrete degradation. The resiliency of infrastructure during extreme events relies on the condition, adaptability, and recoverability of built infrastructure (roads, bridges, dams), which serves as the backbone of existing infrastructure systems. Much of the built infrastructure in the US has consistently been rated D+ by the American Society of Civil Engineers (ASCE). Aged infrastructure introduces risk to the system, since unreliable infrastructure increases the likelihood of failures under chronic and extreme stress and are particularly concerning when extreme events occur. To understand and account for this added risk from poor infrastructure quality, more research is needed on (i) how the changing environment alters the aging of new and existing built infrastructure and (ii) how degradation causes unique failure mechanisms. The aging of built infrastructure is based on degradation of the structural materials, such as concrete and steel supports, which causes failure. Current work in cement/concrete degradation is based on (i) the development of high strength and degradation resistance concrete mixtures, (ii) methods of assessing the age and reliability of existing structures, and (3) modeling of structural stability and the microstructural evolution of concrete/cement from degradation mechanisms (sulfide attack, carbonation, decalcification). Sandia National Laboratories (SNL) has made several investments in studying the durability and degradation of cement based materials, including using SNL-developed codes and methodologies (peridynamics, PFLOTRAN) to focus on chemo-mechanical fracture of cement for energy applications. Additionally, a recent collaboration with the University of Colorado Boulder has included fracture of concrete gravity dams, scaling the existing work to applications in full sized infrastructure problems. Ultimately, SNL has the experience in degradation of cementitious materials to extend the current research portfolio and answer concerns about the resilience of aging built infrastructure.

36 MATERIALS SCIENCE↗

Synthesis, characterization, and thermodynamic study of selected K-based zeolites

Potassium-rich zeolites often occur in cementitious systems, as K{sup +} is widespread in various cementitious materials, such as Portland, blended and alkali-activated cements. The knowledge of their stability and of thermodynamic models for solid solutions with Na{sup +} and Ca{sup 2+} are critical to understand long-term development and durability in such cements. Completing previous studies on Na- and Ca-based zeolites, the current work aims to determine the thermodynamic data of 14 types of K-based zeolites, which could possibly form in cementitious systems. The zeolites were synthesized hydrothermally, exchanged with K{sup +}, and characterized thoroughly with respect to framework structures, elemental compositions, water contents, and bond variations. Their thermodynamic properties were derived from the experimental solubility data, which allowed establishing predominance diagrams in the K{sub 2}O-SiO{sub 2}-Al{sub 2}O{sub 3}-H{sub 2}O system. The K-based zeolites typically showed the lowest solubility between 0 and 100 °C, with the notable exception of Ca-gismondine and two Na-based zeolites: natrolite and Na-mordenite.

36 MATERIALS SCIENCE↗

Mechanical and durability properties of ultra-high-performance concrete of spent nuclear fuel dry storage systems: a review

Dry storage systems are used for interim storage of spent nuclear fuel (SNF). However, with the growing need to extend the operational periods of these systems, there are concerns about the degradation of their concrete overpacks, which could compromise the system's structural integrity and safety during hazardous events. Traditional concrete mixtures used in SNF dry storage systems have remained largely unchanged since their inception and often use conventional ingredients. These materials are susceptible to degradation mechanisms such as chemical attacks, alkali-silica reactions (ASR), and freeze–thaw cycles, which can lead to a loss of strength and durability over time. To address these challenges, this paper reviews the application of ultra-high-performance concrete (UHPC) as a promising alternative for spent nuclear fuel dry storage system overpacks. UHPC offers superior mechanical properties, exceptional durability, and reduced susceptibility to degradation mechanisms compared to conventional concrete. This paper focuses on the role of supplementary cementitious materials (SCMs) such as silica fume, fly ash, and metakaolin in enhancing UHPC performance for SNF storage applications. These SCMs have been shown to significantly improve the material’s microstructure, strength, and resistance to environmental stressors typically encountered in SNF storage environments. Moreover, incorporating SCMs supports sustainable construction by reducing cement consumption and associated carbon emissions. The review brings together existing research and experimental data, providing insights for engineers and researchers on developing UHPC mixtures that meet the rigorous demands of spent nuclear fuel dry storage systems, extending their service life and minimizing inspection intervals.

36 - MATERIALS SCIENCE↗

Conceptual Model Testing Related to SDU 6 Drainwell Observations

From its inception in the early 1950s through the end of the Cold War in the early 1990s, the Savannah River Site (SRS) produced nuclear materials for national defense in five reactors. Additionally, irradiated reactor fuel and target tubes were dissolved in nitric acid to recover plutonium and uranium using the PUREX (Plutonium Uranium Reduction EXtraction) process. Liquid waste from these chemical separations processes was then stored onsite in 51 underground tanks. Eight waste storage tanks have been operationally closed (i.e. cleaned and grouted) and the remaining tanks hold a mixture of liquids, insoluble solids, and precipitated salts (SRMC-LWP-2022-00001), the latter generated by evaporating water from the liquid waste. Waste is currently being retrieved from tanks and separated into 1) high-radioactivity, low-volume, and 2) low-radioactivity, high-volume components, principally through the Salt Waste Processing Facility (SWPF) (SRMC-LWP-2023-00001). The former waste stream is vitrified in the Defense Waste Processing Facility (DWPF), stored onsite, and destined for offsite disposal in a deep geologic repository. The latter stream is mixed with dry cementitious materials in the Saltstone Production Facility (SPF) and the wet slurry placed in onsite Saltstone Disposal Units (SDUs) within the Saltstone Disposal Facility (SDF), where it hardens into a cement waste form termed saltstone. A low-infiltration surface cover system will be placed over the SDF at closure, where SDUs will then be in the subsurface post-closure (SRR-CWDA-2019-00001).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Sulphate resistance of low‐clinker engineered cementitious composites examined by MicroXRF imaging

Abstract Engineered cementitious composites (ECC) are a class of high‐performing fibre‐reinforced cementitious materials recognised for their increased ductility and durability compared to conventional cement‐based materials, owing to their autogenously controlled tight crack widths, even when subjected to high strains. To reduce ECC's environmental impact, this research examines the use of a low‐clinker binder − limestone‐calcined clay cement (LC3) − as an alternative to portland cement (PC), along with fly ash to further reduce the clinker proportion and the embodied CO 2 of the formulations. In conventional concrete, LC3 hydrates to a denser microstructure resulting from the synergistic reaction between limestone and calcined clay. At the lower water contents typical of ECC and with the presence of fly ash, the influence of the binder composition on the microstructure is difficult to anticipate. To examine the influence of these compositional variables on microstructure, permeability and durability, the sulphate resistance of LC3‐based ECC is explored. Specifically, the ECC‐LC3 blends are designed with high clinker replacement rate of 75% by mass of binder and contain either conventional fly ash or reclaimed fly ash at 50% by mass of binder. Expansion of ECC‐LC3 samples subjected to standard sodium sulphate test conditions was measured up to 12 months and the depth of penetration of sulphates into the ECC‐LC3 of varying compositions was quantified using micro‐X‐Ray Fluorescence (microXRF) imaging and modelling. The expansion results show that the ECC‐LC3 formulations performed better than the PC samples and can provide adequate resistance to external sulphate attack, even when reclaimed fly ashes are used in place of the conventional ash. In addition, the shallow penetration of sulphate into these cementitious composites demonstrates the low diffusion coefficients values that were determined using the quantitative data from MicroXRF imaging.

Microscopy↗

Mechanical Characterization of Low Modulus Polymer-Modified Calcium-Silicate-Hydrate (C-S-H) Binder

Calcium-silicate-hydrate (C-S-H) represents a key microstructural phase that governs the mechanical properties of concrete at a large scale. Defects in the C-S-H phase are also responsible for the poor ductility and low tensile strength of concrete. Manipulating the microstructure of C-S-H can lead to new cementitious materials with improved structural performance. This paper presents an experimental investigation aiming to characterize a new synthetic polymer-modified synthetic calcium-silicate-hydrate (C-S-H)/styrene-butadiene rubber (SBR) binder. The new C-S-H/SBR binder is produced by calcining calcium carbonate and mixing this with fumed silica (SiO 2 ), deionized water and SBR. Mechanical, physical, chemical and microstructural characterization was conducted to measure the properties of new hardened C-S-H binder. Results from the experimental investigation demonstrate the ability to engineer a new C-S-H binder with low elastic modulus and improved toughness and bond strength by controlling the SBR content and method of C-S-H synthesis. The new binder suggests the possible development of a new family of low-modulus silica-polymer binders that might fit many engineering applications such as cementing oil and gas wells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental study on nanoparticle injection by using a lab-scale wellbore system

After long-term underground storage of CO 2 gas, leakage generated from the cement annulus in the wellbore system is often detected due to unbalanced pressure, chemical attack, etc. Here in this paper, nanoparticle injection technology is introduced to inject different types of nanoparticles into the cementitious material for repairing the leakage paths through electrochemical means. The pressure vessel is designed and built to provide a realistic underground environment with high pressure and high temperature. The testing results are evaluated by the saturate-drying method, charge-passed method, and X-ray microscopy (XRM) test. The results consistently show that all types of nanoparticles tested in this paper can be successfully driven into the cement annulus within the wellbore system. The pressure (6.89 MPa) and temperature (80 °C) in the pressure vessel, and the surrounding rock can directly affect the injection effectiveness. The nanoparticle injection technology is proven to be beneficial to the cracked cement annulus for preventing the leakage of CO 2 gas through the lab-scale wellbore system.

36 MATERIALS SCIENCE↗

Impact of an SRA (hexylene glycol) on irreversible drying shrinkage and pore solution properties of cement pastes

Cementitious materials shrink when exposed to decreasing relative humidities, which may result in cracking. Shrinkage reducing admixtures (SRAs) can be used to reduce this drying shrinkage. Although many studies have shown that SRAs reduce the surface tension of the pore solution, the effects of SRAs on other pore solution properties and their relationship to drying shrinkage have been poorly characterized. In this work, we investigate the impact of an SRA (hexylene glycol) on the drying and re-humidification of a cement paste over an extended relative humidity range. The reduction in the first drying shrinkage by the SRA depends on relative humidity. The SRA also significantly reduces the irreversible drying shrinkage. We concluded that the SRA impacts drying shrinkage by acting on the capillary forces, by acting on the specific range of relative humidity over which those forces occur, and potentially by acting on the surface stresses through pore wall adsorption.

36 MATERIALS SCIENCE↗

Carbon sequestration of steel slag and carbonation for activating RO phase

Carbonation of Ca/Mg minerals in industrial alkaline residues is a technology to sequester CO{sub 2} and reduce its emissions to the atmosphere. In this work, BSE-EDS were used to determine the mineral phase in steel slag; compositions of RO phase were identified and simulated. The carbon sequestration of steel slag was studied, and RO phase was activated by carbonation. Result shows that the amount of CO{sub 2} sequestered in steel slag and RO phase increases as carbonation time increases. Under autoclaving condition, the hydration ratio of MgO in RO phase was 20.10%. Through carbonation, up to 58.83% of MgO in RO phase can be converted into MgCO{sub 3}, and the activation of RO phase by carbonation was manifested. The mechanical properties and volume stability of carbonated steel slag were improved, proving that the positive effect of carbonation on steel slag when applied in cement and cementitious materials.

36 MATERIALS SCIENCE↗

Effects of pH on the nano/micro structure of calcium silicate hydrate (C-S-H) under sulfate attack

Calcium silicate hydrate (C-S-H), the most important Portland cement hydration product, determines the mechanical properties and durability of cementitious materials. In marine environment, C-S-H often suffers from sulfate attack – one of the most common and severe degradations for concrete. pH is considered as a critical factor in determining the deterioration behavior of C-S-H during sulfate attack, of which the significance may be overlooked. This study focused on the role of pH on the deterioration of C-S-H in terms of the composition and nano/micro structure under sulfate attack. The results show that lowering pH aggravates the decalcification of C-S-H, whereas a strong alkaline condition is beneficial to increase the resistance to deterioration. An increase in the mean chain length together with the proportion of large pores (>10 nm) is observed when C-S-H is subjected to low-pH sulfate attack (pH = 10–12), resulting in a relatively loose structure. The deep analysis on defective tobermorite model reveals that calcium at the interlayer of C-S-H nanostructure is readily removed under sulfate attack, thereby improving the potential of Si-O-Si groups formation and increases the mean chain length of C-S-H.

36 MATERIALS SCIENCE↗

Effect of Al on the formation and structure of alkali-silica reaction products

The use of Al-rich supplementary cementitious materials can effectively reduce the expansion of concrete caused by alkali-silica reaction (ASR). However, the role of Al in mitigating the formation and structure of ASR products is only poorly understood, since direct investigation of the reaction in the micro-scale veins of aggregates is difficult. Recent successful synthesis of ASR products provides a unique opportunity to directly assess the role of Al in ASR. In this study, the effect of Al on the formation and structure of ASR products synthesized at 40 and 80 °C is investigated. It is found that the presence of Al in concentration lower than 0.1 mM neither prevents ASR nor alters the structure of the crystalline ASR products formed at 40 °C. However, formation of the crystalline ASR product at 80 °C is lowered at higher Al content due to the formation of a zeolitic precursor.

36 MATERIALS SCIENCE↗

Performance of concrete under accelerated physical salt attack and carbonation

Conventional testing of physical salt attack (PSA) on concrete does not consider concomitant factors that may exist in service and alter the mechanisms and kinetics of PSA. This study adopted a combined testing approach where concrete was concurrently investigated under accelerated PSA and carbonation, simulating elements serving in heavy traffic and industrial zones, while implementing ambient conditions similar to that in geographic locations with previous cases of PSA. Based on the tested mixture design parameters [water-to-binder ratio, cement type, and supplementary cementitious materials], potential performance improvement and risks were identified. Thermal, mineralogical, and microscopy analyses elucidated the co-occurrence of complex degradation processes in concrete subjected to accelerated PSA and carbonation, which were distinctive from that induced by the single-factor PSA exposure. The synoptic results from this study may informatively improve guidance on mixture design of concrete when dual exposure to PSA and carbonation is expected in the field.

36 MATERIALS SCIENCE↗

Efficacy of SCMs to mitigate ASR in systems with higher alkali contents assessed by pore solution method

This study demonstrates the efficacy of supplementary cementitious materials (SCMs) to mitigate alkali-silica reaction (ASR) even when used in conjunction with cement of higher alkali contents (up to 1% Na{sub 2}O{sub eq}). The expansion of concrete prisms was studied immersed in simulated pore solution in order to address the limitations of conventional ASR testing methods, accelerated mortar bar test (AMBT) and concrete prism test (CPT). Expansion results demonstrate that 25% fly ash and 50% slag are both sufficient to mitigate ASR even with cements with alkali content up to 1% Na{sub 2}O{sub eq} and that the pore solution method is a viable alternative ASR testing method. Massive amounts of ASR products (~20 μm thickness) were observed in concretes without SCMs consistent with high degree of expansion and extensive cracking. Small amounts of ASR products (≤5 μm thickness) were also observed in concrete with SCMs despite absence of significant expansion.

36 MATERIALS SCIENCE↗

Towards ternary binders involving limestone additions — A review

The review summarises literature to examine the transition from portland limestone cement system to composite ternary binder systems involving limestone. Interest in limestone addition as an ideal component in multicomponent binder systems has surged as evident from the large volume of literature published in the recent past. A ternary blended system, with co-substitution of limestone, has the potential to complement the reaction of the supplementary cementitious materials (SCMs). The direct addition of limestone powder helps to attain higher substitution levels of portland cement clinker, improve early age properties, and supplement SCM's reactivity. However, the dilution of hydrates could hamper the long-term benefits. In this review, the interaction of fine limestone is classified and elaborated under two broad umbrellas: physical and chemical interactions. The physical interactions can manifest in three ways, namely, filler action, shearing action and improved packing, which alters reaction rate and extent at early ages. The chemical interactions also modify the reaction kinetics and phase assemblage due to nucleation of C-S-H on calcite surfaces, preservation of the ettringite phase and formation of carboaluminates. Two different forms of carboaluminate hydrates — hemicarboaluminate and mono-carboaluminate can be present in the hydrate matrix depending on the balance between carbonate ions and aluminates in the pore solution. Several factors such as replacement level, particle size, choice of SCM, its reactivity and reactive aluminates content, sulphate levels, curing temperature, and duration of curing can control the carboaluminate formation, reaction degree of SCMs and chemical interaction from limestone additions. A combination of physical and chemical effects makes fine limestone a potential material for co-substitution with aluminosilicate based SCMs, mainly fly ash, slag, and calcined clay. In this review, the factors affecting limestone-SCM composites are summarised based on a detailed literature survey. The effects of SCM-limestone cement composites on hydration kinetics, reaction chemistry, the reactivity of SCMs, the stability of hydrated phases, and contribution to the physical structure development and macroscopic properties by evaluating hydration and mechanical properties are discussed. The importance of AFm (Al{sub 2}O{sub 3}–Fe{sub 2}O{sub 3}-mono) phases in various deterioration mechanisms in concrete and their influence on performance characteristics in different exposure environment is critically appraised.

36 MATERIALS SCIENCE↗