Search NASA⌕ Search

SEARCH · Search NASA

Results for “Checking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A Systematic Approach to Offshore Wind Turbine Jacket Pre-Design and Optimization: Geometry, Cost, and Surrogate Structural Code Check Models

The main obstacles in preliminary design studies or optimization of jacket substructures for offshore wind turbines are high numerical expenses for structural code checks and simplistic cost assumptions. In order to create a basis for fast design evaluations, this article provides the following: firstly, a jacket model is proposed that covers topology and tube sizing with a limited set of design variables. Secondly, a cost model is proposed that goes beyond the simple and common mass-dependent approach. And thirdly, the issue of numerical efficiency is addressed by surrogate models both for fatigue and ultimate limit state code checks. In addition, this work shows an example utilizing all models. The outcome can be utilized for preliminary design studies and jacket optimization schemes and is suitable for scientific and industrial applications.

17 WIND ENERGY↗

Fluid check valve has fail-safe feature

Check valve ensures unidirectional fluid flow and, in case of failure, vents the downstream fluid to the atmosphere and gives a positive indication of malfunction. This dual valve consists of a master check valve and a fail-safe valve.

Gaul, L. C.↗

Solenoid-operated swing-check valve

Modification of spring-loaded swing-check valve for solenoid operation provides low-vacuum swing-check valve which can be operated remotely.

Quattrone, P. D.↗

Method and apparatus for checking fire detectors

A fire detector checking method and device are disclosed for nondestructively verifying the operation of installed fire detectors of the type which operate on the principle of detecting the rate of temperature rise of the ambient air to sound an alarm and/or which sound an alarm when the temperature of the ambient air reaches a preset level. The fire alarm checker uses the principle of effecting a controlled simulated alarm condition to ascertain wheather or not the detector will respond. The checker comprises a hand-held instrument employing a controlled heat source, e.g., an electric lamp having a variable input, for heating at a controlled rate an enclosed mass of air in a first compartment, which air mass is then disposed about the fire detector to be checked. A second compartment of the device houses an electronic circuit to sense and adjust the temperature level and heating rate of the heat source.

Clawson, G. T.↗

Space shuttle prototype check valve development

Contaminant-resistant seal designs and a dynamically stable prototype check valve for the orbital maneuvering and reaction control helium pressurization systems of the space shuttle were developed. Polymer and carbide seal models were designed and tested. Perfluoroelastomers compatible with N2O4 and N2H4 types were evaluated and compared with Teflon in flat and captive seal models. Low load sealing and contamination resistance tests demonstrated cutter seal superiority over polymer seals. Ceramic and carbide materials were evaluated for N2O4 service using exposure to RFNA as a worst case screen; chemically vapor deposited tungsten carbide was shown to be impervious to the acid after 6 months immersion. A unique carbide shell poppet/cutter seat check valve was designed and tested to demonstrate low cracking pressure ( 2.0 psid), dynamic stability under all test bench flow conditions, contamination resistance (0.001 inch CRES wires cut with 1.5 pound seat load) and long life of 100,000 cycles (leakage 1.0 scc/hr helium from 0.1 to 400 psig).

Tellier, G. F.↗

Chemical vapor deposited tungsten with dispersed carbides for Space Shuttle check valves

A chemical vapor deposited tungsten with dispersed carbides was selected as the material for Space Shuttle Orbital Maneuvering and Reaction Control Systems check valve poppets and seats. The selection followed a NASA-sponsored prototype check valve development program utilizing the cutter-seal shell poppet concept. The poppet material is deposited as a coating approximately 0.9 mm thick and fabricated into a shell as a free standing body. The seat material is deposited as a coating 1.1 mm thick on a seat blank, and the cutter seal is machined in the coating. Module tests demonstrated that the material could be ground and lapped to very sharp edges and could cut through typical system contaminants without excessive damage to the sealing surfaces. The material was also determined to be unaffected by exposure to a strongly oxidizing storable propellant.

Williams, G. E.↗

On implementing self-checking microprocessors

A simple and general model of the interfaces and check circuits used for comparing and detecting faults in a pair of 16-bit processors is described, and problems encountered in the application of TI 9900 processors are discussed. The greatest incompatibility is found to lie between the rollback structures of the CPUs and the interface and check logic (ICL) model. The ICL model generates a reset when an error is detected, and a rollback is expected to occur when it is released. The TI 9900 requires a reset of minimum duration, and after release goes through an initialization cycle, obtains rollback parameters from fixed memory locations, and executes the rollback, consistent with the ICL. The ICL is relatively simple, having a complexity equivalent to fewer than 1000 gates.

Rennels, D. A.↗

A voice-actuated wind tunnel model leak checking system

A voice-actuated wind tunnel model leak checking system was developed. The system uses a voice recognition and response unit to interact with the technician along with a graphics terminal to provide the technician with visual feedback while checking a model for leaks.

Larson, W. E.↗

Joule-Thomson Expander Without Check Valves

Cooling effected by bidirectional, reciprocating flow of gas. Type of Joule-Thomson (J-T) expander for cryogenic cooling requires no check valves to prevent reverse flow of coolant. More reliable than conventional J-T expander, containing network of check valves, each potential source of failure. Gas flows alternately from left to right and right to left. Heat load cooled by evaporation of liquid from left or right compartment, whichever at lower pressure.

Chan, C. K.↗

Machine-checked proofs of the design and implementation of a fault-tolerant circuit

A formally verified implementation of the 'oral messages' algorithm of Pease, Shostak, and Lamport is described. An abstract implementation of the algorithm is verified to achieve interactive consistency in the presence of faults. This abstract characterization is then mapped down to a hardware level implementation which inherits the fault-tolerant characteristics of the abstract version. All steps in the proof were checked with the Boyer-Moore theorem prover. A significant results is the demonstration of a fault-tolerant device that is formally specified and whose implementation is proved correct with respect to this specification. A significant simplifying assumption is that the redundant processors behave synchronously. A mechanically checked proof that the oral messages algorithm is 'optimal' in the sense that no algorithm which achieves agreement via similar message passing can tolerate a larger proportion of faulty processor is also described.

Bevier, William R.↗

Advanced software development workstation: Effectiveness of constraint-checking

This report summarizes the findings and lessons learned from the development of an intelligent user interface for a space flight planning simulation program, in the specific area related to constraint-checking. The different functionalities of the Graphical User Interface part and of the rule-based part of the system have been identified. Their respective domain of applicability for error prevention and error checking have been specified.

Izygon, Michel↗

Probabilistic evaluation of on-line checks in fault-tolerant multiprocessor systems

The analysis of fault-tolerant multiprocessor systems that use concurrent error detection (CED) schemes is much more difficult than the analysis of conventional fault-tolerant architectures. Various analytical techniques have been proposed to evaluate CED schemes deterministically. However, these approaches are based on worst-case assumptions related to the failure of system components. Often, the evaluation results do not reflect the actual fault tolerance capabilities of the system. A probabilistic approach to evaluate the fault detecting and locating capabilities of on-line checks in a system is developed. The various probabilities associated with the checking schemes are identified and used in the framework of the matrix-based model. Based on these probabilistic matrices, estimates for the fault tolerance capabilities of various systems are derived analytically.

Nair, V. S. S.↗

Developmental testing resulting in a simplified liquid oxygen check valve for the Space Shuttle Main Propulsion System

The coil spring in a Space Shuttle liquid oxygen check valve failed due to cyclic fatigue in September, 1991. The dual-flapper, swing check valve is used to prevent reverse flow to the Space Shuttle Main Engines. Upon inspection of the failed component, the spring tangs were found to be missing and heavy wear was observed on the inner diameter of the spring coils. The fracture surfaces revealed that the metal had been steadily worn away until a simple overload caused the final fracture. A series of flow tests using water and a water/gas mixture was conducted to identify the flow phenomenon which produced the cyclic wear. A Plexiglas outlet housing was utilized to view the flapper behavior under different flow conditions and to aid in high speed photography. The tests revealed that flow instabilities induced two oscillatory flapper responses: a rocking mode and a chattering mode. Initially, attempts were made to reduce the spring-flapper oscillations. However, the final solution to the problem was a springless configuration which satisfied the valve's design requirements and eliminated the oscillations. The springless design relied on the inherent ability of the reverse flow momentum to close the flappers.

Aber, Gregory S.↗

SEQ-REVIEW: A tool for reviewing and checking spacecraft sequences

A key component of JPL's strategy to make space missions faster, better and cheaper is the Advanced Multi-Mission Operations System (AMMOS), a ground software intensive system currently in use and in further development. AMMOS intends to eliminate the cost of re-engineering a ground system for each new JPL mission. This paper discusses SEQ-REVIEW, a component of AMMOS that was designed to facilitate and automate the task of reviewing and checking spacecraft sequences. SEQ-REVIEW is a smart browser for inspecting files created by other sequence generation tools in the AMMOS system. It can parse sequence-related files according to a computer-readable version of a 'Software Interface Specification' (SIS), which is a standard document for defining file formats. It lets users display one or several linked files and check simple constraints using a Basic-like 'Little Language'. SEQ-REVIEW represents the first application of the Quality Function Development (QFD) method to sequence software development at JPL. The paper will show how the requirements for SEQ-REVIEW were defined and converted into a design based on object-oriented principles. The process starts with interviews of potential users, a small but diverse group that spans multiple disciplines and 'cultures'. It continues with the development of QFD matrices that related product functions and characteristics to user-demanded qualities. These matrices are then turned into a formal Software Requirements Document (SRD). The process concludes with the design phase, in which the CRC (Class, Responsibility, Collaboration) approach was used to convert requirements into a blueprint for the final product.

Maldague, Pierre F.↗

Using Model Checking to Validate AI Planner Domain Models

This report describes an investigation into using model checking to assist validation of domain models for the HSTS planner. The planner models are specified using a qualitative temporal interval logic with quantitative duration constraints. We conducted several experiments to translate the domain modeling language into the SMV, Spin and Murphi model checkers. This allowed a direct comparison of how the different systems would support specific types of validation tasks. The preliminary results indicate that model checking is useful for finding faults in models that may not be easily identified by generating test plans.

Penix, John↗

Aerospell Supplemental Spell Check File

Aerospell is a supplemental spell check file that can be used as a resource for researchers, writers, editors, students, and others who compose scientific and technical texts. The file extends the general spell check dictionaries of word processors by adding more than 13,000 words used in a broad range of aerospace and related disciplines.

Source record↗