Search NASA⌕ Search

SEARCH · Search NASA

Results for “Chemical compounds”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Feasibility of Metal Oxide Glasses and Polymer Membranes as Sorbents for Gaseous Oxidized Mercury

Mass spectrometry methods are currently under development by the atmospheric mercury (Hg) research community to elucidate the identity of atmospheric oxidized mercury (Hg II ) compounds. Due to high instrument detection limits, materials that can quantitatively preconcentrate atmospheric Hg II without facilitating compound-altering chemical reactions are needed to support these methods. Cation exchange membranes (CEM) and nylon membranes are currently used to preconcentrate ambient Hg II for concentration measurements and Hg II compound estimation, respectively. However, CEM and nylon membranes are poor candidates for observations by mass spectrometry methods due to release of interfering compounds upon heating; glasses do not have this problem. Here, three metal oxide glasses were explored as potential alternatives for Hg II preconcentration for future use with mass spectrometry methods: calcium phosphate (CaP), iron phosphate (FeP), and calcium aluminate (CaAl). The glasses demonstrated quantitative selective capture of HgBr 2 without capture of Hg 0 . Under ambient conditions, the CaP, FeP, and CaAl sorbed 36.4 ± 12.6% of the total HgII as the CEM. However, when Hg concentrations were normalized to surface area, CaP, FeP, and CaAl sorbed more HgBr 2 in the laboratory and ambient HgII compared to CEM. The CEM and CaP retained similar concentrations of HgBr 2 when preloaded samples were deployed in the field. Additionally, a permeation tube-based calibrator was used to load sorbents with HgBr 2 for investigation of HgII retention on CEM and thermal desorption profile changes on nylon membranes during active sampling. Nylon membranes were purchased from three vendors and used to compare HgBr 2 retention; a different HgBr 2 thermal desorption profile was achieved for each vendor’s nylon membrane.

Amides↗
DOE OSTI2019

Message-passing neural networks for high-throughput polymer screening

Machine learning methods have shown promise in predicting molecular properties, and given sufficient training data, machine learning approaches can enable rapid high-throughput virtual screening of large libraries of compounds. Graph-based neural network architectures have emerged in recent years as the most successful approach for predictions based on molecular structure and have consistently achieved the best performance on benchmark quantum chemical datasets. However, these models have typically required optimized 3D structural information for the molecule to achieve the highest accuracy. These 3D geometries are costly to compute for high levels of theory, limiting the applicability and practicality of machine learning methods in high-throughput screening applications. In this study, we present a new database of candidate molecules for organic photovoltaic applications, comprising approximately 91,000 unique chemical structures. Compared to existing datasets, this dataset contains substantially larger molecules (up to 200 atoms) as well as extrapolated properties for long polymer chains. We show that message-passing neural networks trained with and without 3D structural information for these molecules achieve similar accuracy, comparable to state-of-the-art methods on existing benchmark datasets. Furthermore, these results therefore emphasize that for larger molecules with practical applications, near-optimal prediction results can be obtained without using optimized 3D geometry as an input. We further show that learned molecular representations can be leveraged to reduce the training data required to transfer predictions to a new density functional theory functional.

14 SOLAR ENERGY↗
DOE OSTI2025

Probing the Sustainable Reduction of CO 2 , N 2 and NO 3 to Fuels and Chemicals using Non-Traditional Porphyrinoid Catalysts

For the last several decades, numerous strategies have been proposed to be able to interconvert electricity and commodity fuels for transportation and other applications. Even as solar and wind energy become more widely available, these renewable energy sources are not always available where the population is most dense or during peak times of energy demand. One plausible solution to the issue of electricity storage and transport is to use electricity to drive the formation of high-energy compounds and chemical fuels. As a result, the electrochemical conversion of CO 2 into chemical fuels has received major attention as a multi-pronged approach for electricity coversion, storage, and transport. Similar strategies are also attractive for conversion of N 2 and NO x into value added compounds such as ammonia. Metalloporphyrin and metallocorrole complexes are comprised of aromatic tetrapyrrole scaffolds and have been extensively studied as homogeneous catalysts for critical catalytic processes like the electrochemical CO 2 reduction reaction (eCO 2 RR) to generate CO as feedstock for the Fischer–Tropsch process to generate a variety of hydrocarbons as chemical fuels. Despite their significance and impact, efficiently driving such catalytic reduction processes is challenging for multiple reasons. Such processes require multiple-electron transfer events, as opposed to single-electron redox chemistry that forms high-energy singly-reduced intermediates. In addition, these electron transfer events must be coupled to proton-transfer steps and avoid application of high overpotentials where proton (H + ) reduction to generate H 2 (as well as other side-reactions) can lower the selectivity and energy efficiency of the eCO 2 RR process. Certain Fe(III) aromatic tetrapyrroles (e.g., porphyrins and corroles) have been reported to overcome these challenges, but are often difficult to synthesize and modify, and have a tendency to support single-electron redox chemistry at the metal as opposed to multielectron redox involving the ligand and metal in concert. Other families of tetrapyrroles in which all four meso-carbons are reduced (i.e., sp 3 -hybridized) are also known in the literature. These non-aromatic tetrapyrroles are known as porphyrinogens and support multi-electron redox chemistry which has been elaborated by several groups, prompting researchers to consider whether these scaffolds may improve the kinetics and efficiencies of multi-electron steps attendant to activation of thermodynamically stable small-molecule substrates such as CO 2 , N 2 , NO 3 − , and NO 2 − . Although porphyrinogens support multi-electron redox properties, the four sp 3 -hybridized meso-carbons inherent to the tetrapyrrole core completely disrupt π-conjugation between pyrrolic units, which compromises the photochemical properties of porphyrinogens in comparison to that of traditional porphyrinoids. Moreover, the highly reducing nature of porphyrinogens predisposes these platforms to extreme air and water sensitivity. Accordingly, such metalated porphyrinogens are often pyrophoric and/or incompatible with many common organic solvents (CH 2 Cl 2 , CHCl 3 , CH 3 CN, EtOAc, etc.). Hence, reports of efficient small-molecule activation or catalysis supported by porphyrinogens have been limited. To overcome the instability of porphyrinogens while retaining the scaffold’s attractive multi-electron redox properties, we have directed attention to establishing less-well studied groups of non-aromatic tetrapyrroles (i.e., phlorins, biladienes, and isocorroles). These non-traditional tetrapyrroles each contain just a single sp 3 -hybridized meso-carbon, which ablates the platforms aromaticity but still provides an extended π-framework. In addition to developing innovative platforms that may be used to sustainably generate value-added chemicals, fuels, and ammonia via either photo- or electrocatalytic approaches our work also has significantly broadened our understanding of how to prepare and modulate the properties of non-aromatic tetrapyrroles for other applications. Our efforts entailed a synergistic partnership and active collaborations with Drs. David C. Grills and Mehmed Z. Ertem (both of Brookhaven National Lab) to better characterize isocorroles (and related non-aromatic tetrapyrroles) using a variety of advanced spectroscopic and theoretical methods. Our combined efforts have shown that the combination of properties that isocorroles (and related tetrapyrroles) provide results in good chemical stability paired with unique redox and photochemical characteristics that are not typically supported by simple and/or unadorned aromatic tetrapyrroles. Beside redox chemistry, the photochemistry of isocorroles and other non-aromatic tetrapyrroles containing one sp 3 -hybridized meso-carbon is also appealing due to their absorption in the long-visible to near-IR regions, which are essential for photocatalysis and related applications that benefit from direct excitation at these wavelengths. The results reported vastly improve our understanding of non-aromatic tetrapyrrole synthesis, properties and utility for activation of small molecule substrates such as O 2 and CO 2 in the presence of weak cationic organic acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Nonadiabatic couplings from a variational excited state method based on constrained DFT

Excited Costrained Density Functional Theory (XCDFT) is a variational excited state method that extends ground state DFT to the computation of low-lying excited states. It borrows much of the machinery of Constrained DFT (CDFT) with a crucial difference: the constraint imposes a population of one electron in the Hilbert space spanned by the virtuals of a reference ground state. Here, we present theory and implementation for evaluating nonadiabatic coupling vectors (NACVs) between the first excited state computed with XCDFT and the ground state. Our NACVs are computed analytically using density functional perturbation theory with a formalism that is general enough that could be applied to CDFT diabatic states. We showcase the new method with pilot NACV calculations for the conical intersection in H 3 , the avoided crossing in selenoacrolein, and the NACV magnitudes in azobenzene. Despite complications from the nonorthogonality of the wavefunctions, XCDFT’s energy surfaces and NACVs reproduce benchmark values and respect known sum rules within a reasonable degree. This shows that XCDFT is a viable method for nonadiabatic dynamics simulations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Position-Specific Carbon Isotope Fingerprinting of Fluorinated Organics and Degradation Products

Fluorinated organic compounds are of growing environmental and forensic relevance due to their widespread use in pharmaceuticals, agrochemicals, and consumer products, their environmental persistence, and potential ecological and human health impacts. Elucidating their sources and transformation pathways is therefore a major focus of current research. Stable carbon isotope analysis provides a powerful approach for tracing molecular origins and linking parent compounds to degradation products. Recent isotope measurements have largely relied on mass-spectrometry techniques, which provide only an average isotope ratio across a compound. In this work, we employ a novel nuclear magnetic resonance (NMR) spectroscopy tool to determine position-specific carbon isotope ratios ( 13 C/ 12 C) in organofluorine compounds and their degradation products. This approach enables isotope measurements without combustion or extensive purification and, crucially, resolves ratios at individual carbon positions rather than bulk averages. The resulting intramolecular isotope fingerprints are unique to a molecule’s source. Applied to selected pharmaceuticals and pesticides, these fingerprints allow discrimination of chemically identical compounds. Moreover, we show that the 13 C/ 12 C signature at the fluorinated carbon persists through degradation, demonstrated for lansoprazole and fipronil. The 19 F NMR data produced for the 13 C/ 12 C analyses are also well suited for impurity profiling, providing an additional dimension for fingerprinting fluorinated organics. These findings suggest that position-specific isotope analysis can serve as part of a broader suite of tools for source characterization of organofluorine compounds and their breakdown derivatives, with potential applications in product validation, forensics, and linking these compounds to their breakdown products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Oxygenated Molecules measured with a Nitrate Chemical Ionization Mass Spectrometer

These files contain selected oxygenated compounds detected by chemical ionization mass spectrometry with nitrate reagent ion. Detected compounds were grouped by volatility and the time series of the most intense ions in each volatility class are provided here. Volatility (C*) in units of μg m^-3 was calculated using log_10(C*)=(n_ref -n_C)*b_C - (n_O - 3*n_N)*b_O - 2*(((n_O - 3n_N)*n_C) / (n_C + n_O - 3*n_N))*b_CO - n_N* b_N where n_ref = 25, b_c = 0.475m b_O = 0.2, b_N = -0.5, b_CO = 0.9, n_C is the number of carbon atoms in the ion formula, n_O is the number of oxygen atoms in the ion formula, and n_N is the number of nitrogen atoms in the ion formula. Volatility was calculated for each formula (with the nitrate anion excluded) and compounds were assigned into extremely low volatility (ELVOCs, C* < 10^−4.5 μg m^-3), low volatility (LVOCs, 10^−4.5 μg m^-3 ≤ C* < 10^−0.5 μg m^-3), or semi-volatile (SVOCs, 10^−0.5 μg m^-3 ≤ C* < 10^2.5 μg m^-3) bins. All ions were assumed to be detected with a collision-limited sensitivity and thus represent lower bound values. Values are reported as parts per trillion by volume mixing ratio.

Extremely low-volatility organic compounds↗
DOE OSTI2020

Critical Design Elements for an On-Site Mercury Concentration and Holding Facility - 20175

Administrative changes and funding issues have delayed the Department of Energy (DOE) from establishing and commissioning a National Repository for mercury as required under the Mercury Export Ban Act (MEBA) of 2008. In the interim, a few hazardous waste Treatment, Storage, and Disposal Facilities (TSDFs) have been authorized to accept mercury classified as a hazardous waste as under Subtitle C of the Resource Conservation and Recovery Act (RCRA). Waste generators are charged (either by weight or by volume) for the waste they manifest to these TSDFs. In many cases, mercury and mercury compounds have chemically sorbed to (or physically lodged into) the interstitial spaces of a substrate material. This almost always causes the amount of waste generated to be unnecessarily large, due to the extra volume (or weight) of the accompanying, non-mercury materials. Depending on a multitude of factors, it could be financially beneficial for waste generators to take greater control of their mercury affairs by separating these substrate materials from the mercury and mercury compounds that have become associated with them. Building and operating an on-site mercury Concentration and Holding Facility (CHF) could help relieve a waste generator's overall cost burden. The purpose of such CHFs is not to treat or dispose of mercury, but to recover and concentrate mercury from bulky mercury-laden materials to the extent that the host substrate to which the mercury may have previously been sorbed could pass a Toxicity Characteristic Leaching Procedure (TCLP) test and either be disposed of at a conventional landfill, or be disposed of at a hazardous waste landfill, but absent additional restrictions specifically for mercury. A CHF represents a way for waste generators to save money by separating mercury from common host materials, concentrating it, and then safely storing it until transportation to an authorized TSDF takes place This paper focuses on the critical design elements waste generators should consider when designing and operating a mercury CHF. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Chemical Vapor Deposition of Zirconium Compounds: A Review

Coatings of zirconium compounds are used in a wide variety of fields, yet an understanding and descriptions of deposition mechanisms are scant in the public literature. The mechanisms of deposition for metallic zirconium, ZrC, ZrN, ZrO 2 , ZrB 2 , and zirconium silicides are discussed based on the direct vapor deposition research of those compounds where possible or compared to complementary titanium systems when direct research is lacking. Both inorganic and organometallic deposition systems are discussed. As a class of compounds, an understanding of the vapor deposition mechanisms can be significantly improved by investigations on metallic zirconium deposition by zirconium halides and hydrogen and by in situ analysis techniques such as Fourier-transform infrared (FTIR) spectroscopy or x-ray photoelectron spectroscopy (XPS).

organometallic↗
DOE OSTI2023

Vapor-phase grafting of functional silanes on atomic layer deposited Al 2 O 3

Fundamental studies are needed to advance our understanding of selective adsorption in aqueous environments and develop more effective sorbents and filters for water treatment. Vapor-phase grafting of functional silanes is an effective method to prepare well-defined surfaces to study selective adsorption. In this investigation, we perform vapor phase grafting of five different silane compounds on aluminum oxide (Al2O3) surfaces prepared by atomic layer deposition. These silane compounds have the general formula L3Si–C3H6–X where the ligand, L, controls the reactivity with the hydroxylated Al2O3 surface and the functional moiety, X, dictates the surface properties of the grafted layer. We study the grafting process using in situ Fourier transform infrared spectroscopy and ex situ x-ray photoelectron spectroscopy measurements, and we characterize the surfaces using scanning electron microscopy, atomic force microscopy, and water contact angle measurements. Here, we found that the structure and density of grafted aminosilanes are influenced by their chemical reactivity and steric constraints around the silicon atom as well as by the nature of the anchoring functional groups. Methyl substituted aminosilanes yielded more hydrophobic surfaces with a higher surface density at higher grafting temperatures. Thiol and nitrile terminated silanes were also studied and compared to the aminosilane terminated surfaces. Uniform monolayer coatings were observed for ethoxy-based silanes, but chlorosilanes exhibited nonuniform coatings as verified by atomic force microscopy measurements.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Quantum Chemical Density Matrix Renormalization Group Method Boosted by Machine Learning

The use of machine learning (ML) to refine low-level theoretical calculations to achieve higher accuracy is a promising and actively evolving approach known as Δ-ML. The density matrix renormalization group (DMRG) is a powerful variational approach widely used for studying strongly correlated quantum systems. High computational efficiency can be achieved without compromising accuracy. Here, we demonstrate the potential of a simple ML model to significantly enhance the performance of the quantum chemical DMRG method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Collective states and charge density waves in the group IV transition metal trichalcogenides

It has been nearly a century since the original mechanism for charge density wave (CDW) formation was suggested by Peierls. Since then, the term has come to describe several related concepts in condensed matter physics, having their origin in either the electron–phonon or electron–electron interaction. The vast majority of CDW literature deals with systems that are metallic, where discussions of mechanisms related to the Fermi surface are valid. Recently, it has been suggested that semiconducting systems such as TiS 3 and TiSe 2 exhibit behavior related to CDWs. In such cases, the origin of the behavior is more subtle and intimately tied to electron–electron interactions. We introduce the different classifications of CDW systems that have been proposed and discuss work on the group IV transition metal trichalcogenides (TMTs) (ZrTe 3 , HfTe 3 , TiTe 3 , and TiS 3 ), which are an exciting and emergent material system whose members exhibit quasi-one-dimensional properties. TMTs are van der Waals materials and can be readily studied in the few-layer limit, opening new avenues to manipulating collective states. We emphasize the semiconducting compound TiS 3 and suggest how it can be classified based on available data. Although we can conjecture on the origin of the CDW in TiS 3 , further measurements are required to properly characterize it.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Competing Magnetic Interactions in the Antiferromagnetic Topological Insulator MnBi 2 Te 4

The antiferromagnetic (AFM) compound MnBi 2 Te 4 is suggested to be the first realization of an AFM topological insulator. Here, we report on inelastic neutron scattering studies of the magnetic interactions in MnBi 2 Te 4 that possess ferromagnetic triangular layers with AFM interlayer coupling. The spin waves display a large spin gap and pairwise exchange interactions within the triangular layer are long ranged and frustrated by large next-nearest neighbor AFM exchange. The degree of frustration suggests proximity to a variety of magnetic phases, potentially including skyrmion phases, which could be accessed in chemically tuned compounds or upon the application of symmetry-breaking fields.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Applying the core-satellite species concept: Characteristics of rare and common riverine dissolved organic matter

Introduction: Dissolved organic matter (DOM) composition varies over space and time, with a multitude of factors driving the presence or absence of each compound found in the complex DOM mixture. Compounds ubiquitously present across a wide range of river systems (hereafter termed core compounds) may differ in chemical composition and reactivity from compounds present in only a few settings (hereafter termed satellite compounds). Here, we investigated the spatial patterns in DOM molecular formulae presence (occupancy) in surface water and sediments across 97 river corridors at a continental scale using the “Worldwide Hydrobiogeochemical Observation Network for Dynamic River Systems—WHONDRS” research consortium. Methods: We used a novel data-driven approach to identify core and satellite compounds and compared their molecular properties identified with Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS). Results: In this work, we found that core compounds clustered around intermediate hydrogen/carbon and oxygen/carbon ratios across both sediment and surface water samples, whereas the satellite compounds varied widely in their elemental composition. Within surface water samples, core compounds were dominated by lignin-like formulae, whereas protein-like formulae dominated the core pool in sediment samples. In contrast, satellite molecular formulae were more evenly distributed between compound classes in both sediment and water molecules. Core compounds found in both sediment and water exhibited lower molecular mass, lower oxidation state, and a higher degree of aromaticity, and were inferred to be more persistent than global satellite compounds. Higher putative biochemical transformations were found in core than satellite compounds, suggesting that the core pool was more processed. Discussion: The observed differences in chemical properties of core and satellite compounds point to potential differences in their sources and contribution to DOM processing in river corridors. Overall, our work points to the potential of data-driven approaches separating rare and common compounds to reduce some of the complexity inherent in studying riverine DOM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Structural deformation and mechanical response of CrS 2 , CrSe 2 and Janus CrSSe

In the framework of density functional theory (DFT), we investigate the structural deformation, and mechanical behavior of the Janus CrSSe, which has out-of-plane structural asymmetry, with conventional transition metal dichalcogenides (TMDs) CrS 2 and CrSe 2 . The Janus CrSSe could be a potential candidate for machinable optoelectronic and piezoelectric applications. Here, we predict that these compounds are chemically, mechanically, and dynamically stable with the covalent bond between the TM(Cr) and chalcogen(X=S, Se) atoms. Due to the influence of tensile strain, the Cr–X bond length of each monolayers increases and the thickness decreases. Interestingly, the in-plane stiffness, shear and layer moduli, Poisson’s ratio, ultimate bi/uni-axial stress of Janus CrSSe are in between the values of CrS 2 and CrSe 2 monolayers. Similar to TMDs, the orientation-dependent in-plane stiffness and Poisson’s ratio demonstrates the isotropic behavior in Janus CrSSe. Furthermore, it can sustain a larger value of uni/bi-axial tensile strain with the critical strain equivalent to CrX 2 monolayers. By applying higher-order strain, we have also found average elastic–plastic behavior as expected. These findings demonstrate that the Janus CrSSe monolayer is a mechanically stable and ductile compound that maintains the hybrid behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Cleavable magnetic materials from van der Waals layered transition metal halides and chalcogenides

The study of exfoliated 2D magnetic materials is a vibrant and rapidly progressing field and is impacting many areas of condensed matter research including fundamental magnetism, spintronics and optoelectronics, and topological spin and electronic systems. The availability of promising candidate materials has enabled much of the progress in this field. Here, I present my perspective on the development of cleavable magnetic materials with a focus on transition metal halides and chalcogenides and an emphasis on crystal structure and magnetic order. To give proper context for these discussions, brief and incomplete surveys of recent work are included, focusing on specific aspects that I find most useful for guiding work on emerging materials and motivating expansion into other compounds and material families. Several instances of structural changes that can differentiate behaviors of bulk and ultrathin specimens are noted. Probing and understanding potential structural differences present a challenge but also an opportunity for material and device development, if they can be predicted and controlled. It is clear that careful investigations of structure, layer stacking, and defects in materials, how they may relate to the crystal chemistry, and how they may be different in crystals and mono- or few-layer specimens provide invaluable context for understanding the behavior of van der Waals layered magnetic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

An Unconventional Dark Radical Chemistry in Dense Molecular Clouds: Directed Gas-Phase Formation of Naphthyl Radicals

The synthetic pathways to aromatic molecules inside photon-shielded dense molecular clouds remain a fundamental, unsolved enigma in astrochemistry and astrophysics, with low-temperature molecular growth routes involving aromatic radicals, such as prototype bicyclic naphthyl (C 10 H 7 • ), implicated as key sources. Here, exploiting crossed molecular beam experiments augmented by electronic structure calculations, unexpected pathways are exposed leading to the gas-phase formation of 1- and 2-naphthyl via barrierless bimolecular reactions of atomic carbon (C) with indene (C 9 H 8 ) and of dicarbon (C 2 ) with styrene (C 8 H 8 ) accompanied by ring expansion and cyclization together with aromatization. These facile routes challenge conventional wisdom that aromatic radicals are formed in deep space solely via “bright” gas-phase photochemistry of their closed-shell polycyclic aromatic hydrocarbon (PAH) precursors. A hitherto disregarded “dark” aromatic radical chemistry with aromatic radicals synthesized via gas-phase reactions offers new concepts on the chemical evolution of the chemistry of dark molecular clouds eventually culminating in the rapid formation of aromatics, fullerenes, and carbonaceous nanostructures.

Aromatic compounds↗
DOE OSTI2025

How Solvent Mediates the Catalytic Fate of 2-Methoxyphenol in Hydrodeoxygenation Catalysis?

Kinetic and isotopic assessments combined with theoretical calculations shed light on the mechanistic differences in terms of the number of hydrogen addition steps and the electronic charges of reactive hydrogen in the catalytic sequence leading to the Ar−OCH 3 scission of 2-methoxyphenol occurring at various interfaces of vapor−Ru, cyclohexane−Ru, and water−Ru. At vapor−Ru and cyclohexane−Ru interfaces, the initial hydrogen adatom (H*) additions on the phenyl ring disrupt its aromaticity, as a step required to occur before kinetically relevant Ar−OCH 3 scission on an ensemble of Ru sites. The number of H* addition events prerequisite to the formation of the kinetically relevant Ar−OCH 3 scission transition state, however, is larger at the cyclohexane−Ru interface than those at the vapor−Ru and water−Ru interfaces. The preferential solvation of 2-methoxyphenol derived reaction precursors and H* weakens their adsorption on Ru sites, which leads to a decrease in the activation barrier for the third H* addition step and in turn a larger number of H* additions. At the water−Ru interface, water as a polar protic solvent promotes the Ar−OCH 3 scission by enabling a mechanistically distinct catalytic route an adjacent water molecule from the solvent layer assists with the intramolecular proton shuttling from the hydroxyl group (−OH) to the vicinal methoxy group (−OCH 3 ) of 2-methoxyphenol, evolving a highly charged transition state that is further stabilized by the water solvent layer, thereby leading to Ar−OCH 3 scission rate constants that are much higher than those at the vapor−Ru interface and, when comparing at the same H 2 chemical potential, higher Ar−OCH 3 scission turnovers. Furthermore, these distinct mechanistic details of the Ar−OCH 3 scission at various reaction interfaces, inferred from experiment and theory, illustrate how a solvent either solvates reaction intermediates and transition states or directly participates in the formation of kinetically relevant transition states, leading to changes in the free energy landscape, thus rewriting the catalytic fates in hydrodeoxygenation reactions.

09 BIOMASS FUELS↗
DOE OSTI2025

Molecular Mass Growth Processes to Polycyclic Aromatic Hydrocarbons through Radical–Radical Reactions Exploiting Photoionization Reflectron Time-of-Flight Mass Spectrometry

Polycyclic aromatic hydrocarbons (PAHs) represent critical building blocks in molecular mass growth processes to carbonaceous nanoparticles, referred to as interstellar and circumstellar grains along with soot particles in astrophysical environments and combustion systems, respectively. Recent advancements on elucidating elementary steps to PAHs have utilized reactions of aromatic radicals, resonantly stabilized free radicals, and aliphatic radicals with closed shell hydrocarbons. However, the role of radical–radical reactions (RRRs) leading to PAHs has remained largely unexplored on the molecular level due to preceding experimental challenges in producing sufficiently high number densities of radical reactants for isomer-selective detection of products from bimolecular and termolecular reactions. This Account offers the latest developments in our knowledge on the mechanisms and pathways to PAHs via RRRs probed in a chemical microreactor at temperatures as high as 1600 K. Product preservation in a molecular beam coupled with synchrotron vacuum ultraviolet photoionization reflectron time-of-flight mass spectrometry and photoelectron photoion coincidence spectroscopy enabled isomer-selective detection of PAHs of up to three rings by their photoionization efficiency curves, which were fit with a linear combination of reference curves for identification. Experiments were combined with computational fluid dynamics modeling of the physicochemical processes in the microreactor, as well as high-level electronic structure calculations to reveal the reaction pathways of each system. Six distinct reaction mechanisms were discovered in this work: propargyl addition─benzannulation (PABA), methyl addition─ring expansion (MARE), cyclopentadienyl addition─naphthylization (CPAN), fulvenallenyl addition─cyclization─aromatization (FACA), benzyl addition─aromatization (BAA), and phenyl addition─pentacyclization (PAP). By systematically varying the number of carbon atoms in the radical reactants, molecular mass growth processes involving reactions between radicals with odd numbers of carbon atoms access aromatics carrying one, two, or three six-membered rings, whereas reactions between even- and odd-carbon-numbered radicals produce aromatics combining five- and six-membered rings. Our investigations reveal unconventional cycloadditions on excited state triplet surfaces, additions of radicals to low spin density carbon-centered radicals, spiroaromatic and fulvene-type intermediates, and highly strained bicyclic reaction intermediates, challenging current perceptions of PAH molecular mass growth processes. All of the listed mechanisms, except for FACA, feature endoergic reactions or barriers which lie above the separated reactants and therefore might be central to circumstellar environments of carbon-rich stars and planetary nebulae as their descendants, but they play no role in the gas phase of cold molecular clouds where temperatures as low as 10 K dominate. Altogether, this work provides detailed reaction mechanisms of PAH growth processes, advancing our knowledge of the chemistry of carbonaceous matter in the universe.

Addition reactions↗