SEARCH · Search NASA

Results for “Class generation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

DOE OSTI2014

Sci—Sat AM: Stereo — 02: Implementation of a VMAT class solution for kidney SBRT

An emerging treatment option for inoperable primary renal cell carcinoma and oligometastatic adrenal lesions is stereotactic body radiation therapy (SBRT). At our center, kidney SBRT treatments were originally planned with IMRT. The goal was to plan future patients using VMAT to improve treatment delivery efficiency. The purpose of this work was twofold: 1) to develop a VMAT class solution for the treatment of kidney SBRT; and, 2) to assess VMAT plan quality when compared to IMRT plans. Five patients treated with IMRT for kidney SBRT were reviewed and replanned in Pinnacle using a single VMAT arc with a 15° collimator rotation, constrained leaf motion and 4° gantry spacing. In comparison, IMRT plans utilized 7–9 6MV beams, with various collimator rotations and up to 2 non-coplanar beams for maximum organ-at-risk (OAR) sparing. Comparisons were made concerning target volume conformity, homogeneity, dose to OARs, treatment time and monitor units (MUs). There was no difference in MUs; however, VMAT reduced the treatment time from 13.0±2.6min, for IMRT, to 4.0±0.9min. The collection of target and OAR constraints and SmartArc parameters, produced a class solution that generated VMAT plans with increased target homogeneity and improved 95% conformity index calculated at < 1.2. In general, the VMAT plans displayed a reduced maximum point dose to nearby OARs with increased intermediate dose to distant OARs. Overall, the introduction of a VMAT class solution for kidney SBRT improves efficiency by reducing treatment planning and delivery time.

60 APPLIED LIFE SCIENCES↗

NASA NTRS1990

Computational analysis of flow in 3D propulsive transition ducts

A numerical analysis of fully three dimensional, statistically steady flows in propulsive transition ducts being considered for use in future aircraft of higher maneuverability is investigated. The purpose of the transition duct is to convert axisymmetric flow from conventional propulsion systems to that of a rectangular geometry of high aspect ratio. In an optimal design, the transition duct would be of minimal length in order to reduce the weight penalty, while the geometrical change would be gradual enough to avoid detrimental flow perturbations. Recent experiments conducted at the Propulsion Aerodynamics Branch have indicated that thrust losses in ducts of superelliptic cross-section can be surprisingly low, even if flow separation occurs near the divergent walls. In order to address the objective of developing a rational design procedure for optimal transition ducts, it is necessary to have available a reliable computational tool for the analysis of flows achieved in a sequence of configurations. Current CFD efforts involving complicated geometries usually must contend with two separate but interactive aspects: namely, grid generation and flow solution. The first two avenues of the present investigation were comprised of suitable grid generation for a class of transition ducts of superelliptic cross-section, and the subsequent application of the flow solver PAB3D to this geometry. The code, PAB3D, was developed as a comprehensive tool for the solution of both internal and external high speed flows. The third avenue of investigation has involved analytical formulations to aid in the understanding of the nature of duct flows, and also to provide a basis of comparison for subsequent numerical solutions. Numerical results to date include the generation of two preliminary grid systems for duct flows, and the initial application of PAB3D to the corresponding geometries, which are of the class tested experimentally.

Sepri, Paavo↗

NASA NTRS2003

The Nonlinear Coupling of Alfven and Lower Hybrid Waves in Space Plasma

Khazanov, G. V.↗

NASA NTRS2004

The Nonlinear Coupling of Alfven and Lower Hybrid Waves in Space Plasma

Space plasmas support a wide variety of waves, and wave-particle interactions as well as wave-wave interactions which are of crucial importance to magnetospheric and ionospheric plasma behavior. The excitation of lower hybrid waves (LHWs) in particular is a widely discussed mechanism of interaction between plasma species in space and is one of the unresolved questions of magnetospheric multi-ion plasmas. It is demonstrated that large-amplitude Alfven waves may generate LHWs in the auroral zone and ring current region and in some cases (particularly in the inner magnetosphere) this serves as the Alfven wave saturation mechanism. We present several examples of observational data which illustrate that the proposed mechanism is a plausible candidate to explain certain classes of LHW generation events in the ionosphere and magnetosphere and demonstrate electron and ion energization involving these processes. We discuss the morphology dynamics and level of LHW activity generated by electromagnetic ion cyclotron (EMIC) waves during the May 2-7 1998 storm period on the global scale. The LHWs were calculated based on a newly developed self-consistent model (Khazanov et. al. 2002) that couples the system of two kinetic equations: one equation describes the ring current (RC) ion dynamic and another equation describes the evolution of EMIC waves. It is found that the LHWs are excited by helium ions due to their mass dependent drift in the electric field of EMIC waves. The level of LHW activity is calculated assuming that the induced scattering process is the main saturation mechanism for these waves. The calculated LHWs electric fields are consistent with the observational data.

Khazanov, George V.↗

NASA NTRS2022

Building and Breaking Carbon Composites with REACTER

Carbon-based composites have become indispensable materials in aerospace and other high-performance applications, yet obtaining a detailed, nanoscale understanding of their morphology and failure mechanisms using only experimental methods remains a difficult challenge. REACTER is a versatile computational modeling tool for atomistic molecular dynamics simulations designed to model chemical reactions at the speed and length scales of classical force fields. In this work, several recent features of REACTER were applied to the creation and subsequent mechanical testing of two classes of carbon composites: carbon nanotube (CNT) composites and carbon fiber reinforced polymers (CFRP). A network of CNTs was grown dynamically using the new ‘create atoms’ feature of REACTER. The CNT filler was embedded into a polyarylacetylene (PAA) matrix by simulated in situ polymerization to obtain the final composite model. To generate the second class of carbon composite, fully carbonized (graphitic) carbon fiber morphologies were created by the method of Desai et al. [1], but using the advanced reaction constraints framework of REACTER. Two fiber models were created, representing a circular carbon fiber core and a flat surface, and similarly infiltrated with resin to obtain the final CFRP structure. Failure mechanisms were elucidated by simulating mechanically induced bond breaking, as characterized by third order DFT-based tight-binding simulations, via a reaction constraint on the total potential energy of the involved atoms.

Polymer↗

NASA NTRS1994

New Developments and Research Findings: NASA Hydrazine Arcjets

In 1984, the market for commercial geosynchronous communications satellites (comsats) was expanding and there was strong competition between spacecraft builders for market share. The propellant required for the north-south stationkeeping (NSSK) function was a major mission limiter, and the small chemical and resistojet systems then in use were at or near their physical limits. Thus, conditions were right for the development of a high performance NSSK system, and after an extensive survey of both propulsion technologies and the aerospace community, the NASA program chose hydrazine arcjets for development. A joint government/industry development program ensued which culminated in the acceptance of arcjet technology. NASA efforts included fundamental feasibility assessments, hardware development and verification, and multiple efforts aimed at the demonstration of critical operational characteristics of arcjet systems. Throughout the program, constant contact with the user community was maintained to determine system requirements. Both contracted and cooperative programs with industry were supported. First generation, kW-class arcjets are now operational for NSSK on the Telstar 401 satellite launched in December of 1993 and are baselined for use on multiple future satellite series (Intelsat 8, AsiaSat, Echostar). Arcjet development efforts are now focusing on the development of both high performance (600 s), 2 kW thrusters for application on next generation comsats and low power (Pe approximately 0.5 kW) for a variety of applications on power limited satellites. This paper presents a review of the NASA's role in the development of hydrazine arcjets with a focus on approaches, lessons learned, and the future.

Curren, Francis M.↗

DOE OSTI2022

Super-strong magnetic field-dominated ion beam dynamics in focusing plasma devices

High energy density physics is the field of physics dedicated to the study of matter and plasmas in extreme conditions of temperature, densities and pressures. It encompasses multiple disciplines such as material science, planetary science, laboratory and astrophysical plasma science. For the latter, high energy density states can be accompanied by extreme radiation environments and super-strong magnetic fields. The creation of high energy density states in the laboratory consists in concentrating/depositing large amounts of energy in a reduced mass, typically solid material sample or dense plasma, over a time shorter than the typical timescales of heat conduction and hydrodynamic expansion. Laser-generated, high current–density ion beams constitute an important tool for the creation of high energy density states in the laboratory. Focusing plasma devices, such as cone-targets are necessary in order to focus and direct these intense beams towards the heating sample or dense plasma, while protecting the proton generation foil from the harsh environments typical of an integrated high-power laser experiment. A full understanding of the ion beam dynamics in focusing devices is therefore necessary in order to properly design and interpret the numerous experiments in the field. In this work, we report a detailed investigation of large-scale, kilojoule-class laser-generated ion beam dynamics in focusing devices and we demonstrate that high-brilliance ion beams compress magnetic fields to amplitudes exceeding tens of kilo-Tesla, which in turn play a dominant role in the focusing process, resulting either in a worsening or enhancement of focusing capabilities depending on the target geometry.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2016

Crowdsourcing quality control for Dark Energy Survey images

We have developed a crowdsourcing web application for image quality control employed by the Dark Energy Survey. Dubbed the "DES exposure checker", it renders science-grade images directly to a web browser and allows users to mark problematic features from a set of predefined classes. Users can also generate custom labels and thus help identify previously unknown problem classes. User reports are fed back to hardware and software experts to help mitigate and eliminate recognized issues. We report on the implementation of the application and our experience with its over 100 users, the majority of which are professional or prospective astronomers but not data management experts. We discuss aspects of user training and engagement, and demonstrate how problem reports have been pivotal to rapidly correct artifacts which would likely have been too subtle or infrequent to be recognized otherwise. We conclude with a number of important lessons learned, suggest possible improvements, and recommend this collective exploratory approach for future astronomical surveys or other extensive data sets with a sufficiently large user base. We also release open-source code of the web application and host an online demo versionat http://des-exp-checker.pmelchior.net

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1994

Low encounter speed comet COMA sample return missions

Comets, being considered the most primitive bodies in the solar system, command the highest priority among solar-system objects for studying solar nebula evolution and the evolution of life through biogenic elements and compounds. The study of comets, and more especially, of material from them, provides an understanding of the physical, chemical, and mineralogical processes operative in the formation and earliest development of the solar systems. These return samples will provide valuable information on comets and serve as a rosetta stone for the analytical studies conducted on interplanetary dust particles over the past two decades, and will provide much needed extraterrestrial samples for the planetary materials community since the Apollo program. Lander sample return missions require rather complex spacecraft, intricate operations, and costly propulsion systems. By contrast, it is possible to take a highly simplified approach for sample capture and return in the case of a comet. In the past, we have considered Earth free-return trajectory to the comet, in which passive collectors intercept dust and volatiles from the cometary coma. However, standard short period cometary free-return trajectories results in the comet to the spacecraft encounter speeds in the range of 10 km/s. At these speeds the kinetic energy of the capture process can render significant modification of dust structure, change of solid phase as well as the lost of volatiles components. This paper presents a class of new missions with trajectories with significant reduction of encounter speeds by incorporating gravity assists and deep space maneuvering. Low encounter speed cometary flyby sample return will enable a marked increase in the value of the return science. Acquiring thousands of samples from a known comet and thousands of images of a comet nucleus would be space firsts. Applying new approach in flight mechanics to generate a new class of low encounter speed cometary sample return trajectories opens new possibilities in science. A systematic search of trajectories for the first decade of the twenty-first century will be made. The target encounter speed is for less than 7 km/s to short period comets.

Tsou, P.↗

DOE OSTI2015

Class of backpropagation techniques for limited-angle reconstruction in microwave tomography

Filtered backpropagation (FBPP) is a well-known technique used in Diffraction Tomography (DT). For accurate reconstruction using FBPP, full 360° angular coverage is necessary. However, it has been shown that using some inherent redundancies in the projection data in a tomographic setup, accurate reconstruction is still possible with 270° coverage which is called the minimal-scan angle range. This can be done by applying weighing functions (or filters) on projection data of the object to eliminate the redundancies and accurately reconstruct the image from 270° coverage. This paper demonstrates procedures to generate many general classes of these weighing filters. These are all equivalent at 270° coverage but vary in performance at lower angular coverages and in presence of noise. This paper does a comparative analysis of different filters when angular coverage is lower than minimal-scan angle of 270°. Simulation studies have been done to find optimum weight filters for sub-minimal angular coverage (<270°)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

NASA NTRS1982

Coordinate generation with precise controls over mesh properties

Powerful local controls have been developed for mesh generation with the class of multisurface coordinate transformations. The controls come from local piecewise linear interpolants, and the resulting coordinates have continuous first derivatives. At the boundaries, the mesh controls provide the capability of joining distinct coordinate systems together with continuous derivatives. Away from boundaries, a local region can be given a particular mesh form to model internal objects or to simplify a problem. Applications of the controls are illustrated with a sequence of two-dimensional examples. For simplicity, each is generated about a NACA0012 airfoil which is of unit length and with leading edge pointed in a negative x-direction.

Eiseman, P. R.↗

NASA NTRS2010

Solar Sailing is not Science Fiction Anymore

Over 400 years ago Johannes Kepler envisioned the use of sunlight to propel a spacecraft. Just this year, a solar sail was deployed in orbit for the first time and proved that a spacecraft could effectively use a solar sail for propulsion. NASA's first nano-class solar sail satellite, NanoSail-D was designed and developed in only four months. Although the first unit was lost during the Falcon 1 rocket failure in 2008, the second flight unit has been refurbished and is waiting to be launched later this year. NanoSail-D will further the research into solar sail enabled spacecraft. It will be the first of several more sail enabled spacecraft to be launch in the next few years. FeatherSail is the next generation nano-class sail spacecraft being designed with the goal to prove low earth orbit operational capabilities. Future solar sail spacecraft will require novel ideas and innovative research for the continued development of space systems. One such pioneering idea is the Small Multipurpose Advanced Reconfigurable Technology (SMART) project. The SMART technology has the potential to revolutionize spacecraft avionics. Even though solar sailing is currently in its infancy, the next decade will provide great opportunities for research into sailing in outer space.

Alhorn, Dean C.↗

NASA NTRSDate not supplied

Building and Breaking Carbon Composites with REACTER

Carbon composites have become indispensable for aerospace and other high-performance applications, and a detailed picture of their morphology and failure mechanisms remains difficult to obtain through experiment. REACTER is a versatile computational modeling tool for atomistic molecular dynamics designed to model chemical reactions at the speed and length scales of classical force fields.1 In this work, several recent features of REACTER were applied to the creation and subsequent mechanical testing of two classes of carbon composites, carbon-fiber reinforced polymers (CFRP) and carbon nanotube (CNT) composites. Carbon fiber core morphologies were created by the method of Desai et al.,2 but using the advanced reaction constraints framework of REACTER, their proposed multistep procedure was reduced to a single uninterrupted molecular dynamics simulation. The carbon fiber filler was embedded into a polymer matrix by simulated in situ polymerization of several thermosetting resins, including bismaleimide and polyarylacetylene, to obtain the final CFRP model. To generate the second class of carbon composite, CNT networks were grown dynamically using the new ‘create atoms’ feature of REACTER, and similarly infiltrated with resin to obtain CNT composites. The resulting models were compared directly to experiment using simulated high resolution transmission electron microscopy and x-ray diffraction. Failure mechanisms were elucidated by simulating mechanically induced bond breaking, as characterized by third-order DFT-based tight-binding (DFTB3) simulations, via a reaction constraint on the total potential energy of the involved atoms.

Molecular Dynamics↗

DOE OSTI2023

Visualization and efficient generation of constrained high-dimensional theoretical parameter spaces

We describe a set of novel methods for efficiently sampling high-dimensional parameter spaces of physical theories defined at high energies, but constrained by experimental measurements made at lower energies. Often, theoretical models such as supersymmetry are defined by many parameters, $\mathcal{O}$(10 – 100), expressed at high energies, while relevant experimental constraints are often defined at much lower energies, preventing them from directly ruling out portions of the space. Instead, the low-energy constraints define a complex, potentially non-contiguous subspace of the theory parameters. Naive scanning of the theory space for points which satisfy the low-energy constraints is hopelessly inefficient due to the high dimensionality, and the inverse problem is considered intractable. As a result, many theoretical spaces remain under-explored. We introduce a class of modified generative autoencoders, which attack this problem by mapping the high-dimensional parameter space to a structured low-dimensional latent space, allowing for easy visualization and efficient generation of theory points which satisfy experimental constraints. An extension without dimensional compression, which focuses on limiting potential information loss, is also introduced.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS1974

Automated land-use mapping from spacecraft data

The author has identified the following significant results. In response to the need for a faster, more economical means of producing land use maps, this study evaluated the suitability of using ERTS-1 computer compatible tape (CCT) data as a basis for automatic mapping. Significant findings are: (1) automatic classification accuracy greater than 90% is achieved on categories of deep and shallow water, tended grass, rangeland, extractive (bare earth), urban, forest land, and nonforested wet lands; (2) computer-generated printouts by target class provide a quantitative measure of land use; and (3) the generation of map overlays showing land use from ERTS-1 CCTs offers a significant breakthrough in the rate at which land use maps are generated. Rather than uncorrected classified imagery or computer line printer outputs, the processing results in geometrically-corrected computer-driven pen drawing of land categories, drawn on a transparent material at a scale specified by the operator. These map overlays are economically produced and provide an efficient means of rapidly updating maps showing land use.

Chase, P. E.↗

NASA NTRS1973

On the structure of context-sensitive grammars

Consideration of the problem of explaining the use of context in generating noncontext-free languages. A number of existing results regarding the constraints placed on the form of the rules (i.e., on the context) of context-sensitive grammars are reviewed and interpreted. Three types of constraints are considered - namely, constraints which do not restrict the weak generative capacity of the class of grammars (i.e., all the context-sensitive languages are generated by grammars with these constraints), constraints which restrict the weak generative capacity to the extent that all context-sensitive languages are not generated but some noncontext-free languages are generated, and constraints which restrict the weak generative capacity to such an extent that only context-free languages are generated.

Book, R. V.↗

NASA NTRS1992

Enhancing control of grid distribution in algebraic grid generation

Three techniques are presented to enhance the control of grid-point distribution for a class of algebraic grid generation methods known as the two-, four- and six-boundary methods. First, multidimensional stretching functions are presented, and a technique is devised to construct them based on the desired distribution of grid points along certain boundaries. Second, a normalization procedure is proposed which allows more effective control over orthogonality of grid lines at boundaries and curvature of grid lines near boundaries. And third, interpolating functions based on tension splines are introduced to control curvature of grid lines in the interior of the spatial domain. In addition to these three techniques, consistency conditions are derived which must be satisfied by all user-specified data employed in the grid generation process to control grid-point distribution. The usefulness of the techniques developed in this study was demonstrated by using them in conjunction with the two- and four-boundary methods to generate several grid systems, including a three-dimensional grid system in the coolant passage of a radial turbine blade with serpentine channels and pin fins.

Steinthorsson, E.↗

DOE OSTI2023

Low Cost Glass-Ceramic Matrix Composite Heat Exchanger

As part of ARPA-E’s High Intensity Thermal Exchange through Materials and Manufacturing Processes (HITEMMP) program, this project sought to develop novel heat exchanger (HX) capabilities to enable efficient and power dense power generation cycles. This class of HX comes under the category of ceramic/composite materials with the higher temperature goal in the program of ≥1100 °C inlet temperature operation. The enabling capability of this effort is the use of glass-ceramic matrix composite (GCMC) material which provides the high temperature durability of a ceramic, the flaw tolerance of a composite, a significantly faster and lower cost manufacturing process than conventional matrix CMCs and very low porosity levels < 0.5%. For thin-walled HX structures and the need to minimize leakage, the low porosity differentiator is particularly important. RTRC has prior experience with this material system and in the current project advanced the component design and manufacturing methods into new territory to produce features required for effective heat exchange under high pressures. In this approach, silicon carbide fiber is fabricated into a fiber preform using various textile processes. Graphite tooling is used both during the build-up of the fiber preform (interior tooling) and after the fiber preform has been completed (exterior tooling). This tooling assembly is heated to high temperature in an environment that has been evacuated and backfilled with inert gas. A reservoir of specialty glass is present and once the desired temperature has been reached to achieve the desired glass viscosity, an actuator distributes the glass throughout the fiber preform using passageways which are part of the tooling design in a process known as glass transfer molding. After the tooling has been removed, the composite is heat treated to convert the amorphous glass to a crystalline ceramic, providing improved properties. The project was divided into three phases focusing on the following: 1) 10 kW HX design and coupon-level tube sheet fabrication, 2) 10 kW HX fabrication, 3) 50 kW HX fabrication. During Budget Period 1 (BP1), additional risks were encountered and the need for additional funds was agreed upon by ARPA-E program leadership. Due to a variety of factors, the contract modification required nominally 18 months to execute at which time the HITEMMP program was effectively concluding. Because of this and the time that would be required to perform BP2 tasks, it was decided to conclude the project at the end of BP1. During the design of the 10 kW HX, manufacturing constraints were learned and incorporated, leading to a revised configuration for the fiber preform and HX. Heat exchange and pressure drop predictions also played a role in modifying the original design concept to be a higher aspect ratio shell-and-tube HX, simplifying the manufacturing process and improving the heat exchanger performance. Good gravimetric and volumetric thermal power densities of 11.2 kW/kg and 10,200 kW/m3 for the entire HX were projected that involved thermo-structural Finite Element Analysis to determine the structural mass needed for the high operation pressures of 250 bar cold inlet and 80 bar hot inlet. Fiber preforms using textile processes were produced for multiple headered tube sheets. Additional challenges were encountered during the glass transfer molding step for which solutions were identified, but programmatics did not allow them to be implemented in BP1. While complete HX test articles were not fabricated, the benefits of this GCMC material for a variety of high temperature applications remain.

30 DIRECT ENERGY CONVERSION↗