SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Twenty-five instruments were tested, including size characterization devices and two Aitken counters. The test aerosols were supplied to the instruments by an on-line generation system, thereby eliminating the need for storage bags. Cloud condensation chambers and haze chambers are highlighted.
Engineering studies were performed for the Zero-G Cloud Physics Experiment liquid cooling and air pressure control systems. A total of four concepts for the liquid cooling system was evaluated, two of which were found to closely approach the systems requirements. Thermal insulation requirements, system hardware, and control sensor locations were established. The reservoir sizes and initial temperatures were defined as well as system power requirements. In the study of the pressure control system, fluid analyses by the Atmospheric Cloud Physics Laboratory were performed to determine flow characteristics of various orifice sizes, vacuum pump adequacy, and control systems performance. System parameters predicted in these analyses as a function of time include the following for various orifice sizes: (1) chamber and vacuum pump mass flow rates, (2) the number of valve openings or closures, (3) the maximum cloud chamber pressure deviation from the allowable, and (4) cloud chamber and accumulator pressure.
Abstract. It is known that aqueous haze particles can be activated into cloud droplets in a supersaturated environment. However, haze–cloud interactions have not been fully explored, partly because haze particles are not represented in most cloud-resolving models. Here, we conduct a series of large-eddy simulations (LESs) of a cloud in a convection chamber using a haze-capable Eulerian-based bin microphysics scheme to explore haze–cloud interactions over a wide range of aerosol injection rates. Results show that the cloud is in a slow microphysics regime at low aerosol injection rates, where the cloud responds slowly to an environmental change and droplet deactivation is negligible. The cloud is in a fast microphysics regime at moderate aerosol injection rates, where the cloud responds quickly to an environmental change and haze–cloud interactions are important. More interestingly, two more microphysics regimes are observed at high aerosol injection rates due to haze–cloud interactions. Cloud oscillation is driven by the oscillation of the mean supersaturation around the critical supersaturation of aerosol due to haze–cloud interactions. Cloud collapse happens under weaker forcing of supersaturation where the chamber transfers cloud droplets to haze particles efficiently, leading to a significant decrease (collapse) in cloud droplet number concentration. One special case of cloud collapse is the haze-only regime. It occurs at extremely high aerosol injection rates, where droplet activation is inhibited, and the sedimentation of haze particles is balanced by the aerosol injection rate. Our results suggest that haze particles and their interactions with cloud droplets should be considered, especially in polluted conditions.
The Pioneer Venus atmospheric probe provided new data on the clouds of Venus. A model consistent with this data involves SO2 being oxidized to H2SO4 by NO(x) in the presence of H2O. NO(x) also forms nitrosylsulfuric acid (NOHSO4) dissolved in the H2SO4 droplets. This acid solution, along with SO2 and perhaps NO2, can explain the UV and visible reflection spectrum of Venus. In the middle and lower clouds, NOHSO4 forms solid particles.
The Ice Cryo-Encapsulation Balloon (ICEBall) field campaign was designed to sample the ice crystals that compose high-altitude cirrus with a passive device. The campaign made use of a new instrument, ICEBall, which is a balloon-borne ice crystal sampling system. The ice crystal sounding system is capable of measuring ice crystal concentration, temperature, atmospheric pressure, ice crystal habit, aerosol particle morphology, and residual composition. The 3-kg instrument is carried upwards at 5 m s-1 by a high-altitude balloon. The instrument can be cut down from the balloon at any altitude up to 20 km, and the apparatus returns to the surface by parachute. Basic measurements such as temperature and pressure are recorded onboard, and high-frequency Global Positioning System (GPS) records altitude and latitude/longitude. Ice crystal concentrations are measured through the use of a high-resolution video camera mounted on the device. Ice crystals are collected through an open aperture leading to insulated collection chambers cooled with dry ice. Upon exiting the top of the cloud system, the chamber aperture is closed, and the ~1 mm3 sample cell is magnetically sealed and isolated at -78 °C, ensuring that ice particles do not sublimate or grow after collection. Once the crystals are returned to the surface, they are double-sealed and immersed at liquid nitrogen temperature in “dry-cryo shippers” before being transported back to the laboratory. Dr. Magee’s laboratory at The College of New Jersey contains a cryo-stage scanning electron microscope (SEM), which was used to interrogate the crystals and aerosol particles. The main purpose of this pilot field campaign was to provide an unprecedented level of detail on the crystal habits and ice surface complexity in mid-latitude cirrus, which may help resolve issues associated with habit identification and classification in cirrus. The ICEBall campaign was originally scheduled to run from March 28 to April 18 of 2021 at the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) Southern Great Plains observatory. The COVID-19 pandemic intervened and caused us to shift the dates of the experiment to October 16-November 6 of 2021. This period is also climatologically favorable for cirrus. The approximately six-month gap between our original field campaign dates and the actual dates afforded us the opportunity to build two new ICEBall payload instruments. These instruments were tested during an August 2021 trip to The College of New Jersey. During this field testing phase, we decided to launch the ICEBall payload upstream from the ARM SGP site with the goal of landing in the vicinity of the site. Our goal was to sample the ice crystals before the cirrus were advected over the remote-sensing instruments at the SGP site. The team assembled for the field campaign consisted of the Principle Investigator (PI) and Co-Principle Investigator (Co-PI) (Drs. Harrington and Magee), The Pennsylvania State University research scientist Dr. Alfred Moyle, and two graduate students (Ms. Marley Majetic and Gwenore Pokrifka). The team operated out of a house rented in Enid, Oklahoma. We successfully sampled seven cirrus cloud systems during the three-week field campaign (October 21, 23-26, 31, and November 1). This was a much higher success rate than either of the PIs anticipated (our goal was closer to sampling three or four cases). The balloon was typically launched from oil pads or farm fields northwest of Enid and the payload was typically retrieved somewhat north of the SGP site. We never landed directly at the SGP site, and so did not need regular access to the SGP facilities. Our greatest concern going into the field campaign was the longer-term storage of crystals in the -196°C cryo dry-shipper dewars and the subsequent transport across the country. We had tested storage and transport prior to the field campaign, but we had never stored crystals for a few weeks nor had we transported the dewars over long distances. To our great relief, the storage and transport worked flawlessly and we were able to image a large number of crystals from six of the seven cases. Working with the staff at the ARM SGP office was excellent. They not only helped us find the sources we needed for helium, liquid nitrogen, and other materials, but also helped with contacts within the Federal Aviation Administration (FAA) and Vance Air Force Base. One goal of our field project was to tie the in situ measurements of ice crystal habits to the radar signatures derived from the Ka-band ARM Zenith-pointing Radar (KAZR). Unfortunately KAZR was down for the duration of our experiment. However, the Ka-band Scanning ARM Cloud Radar (KASACR) was put into vertically pointing mode during the ICEBall campaign and those data, along with Doppler lidar measurements, have proved very useful.
The Lagrangian Droplet cloud microphysics scheme uses high-resolution data of air velocity, temperature, and water vapor mixing ratio to drive particle-based simulations of cloud microphysics. The model was first implemented using a high-resolution Large Eddy Simulation of the Pi Chamber at Michigan Tech, which is small-scale convection chamber the generates clouds in a laboratory setting
Cloud optical properties and precipitation, which are crucial to weather and climate, are strongly influenced by cloud microphysical properties that are still poorly understood. Here, we develop a high-resolution time-correlated single-photon-counting lidar and apply it to observe cloud microphysical properties at one-centimeter range resolution in a convection chamber under well-controlled conditions. Together with concurrent in-situ measurements and theoretical analysis, our lidar observations indicate that although turbulent mixing tends to homogenize the cloud in the bulk region, entrainment and sedimentation cause inhomogeneities in droplet concentrations near the cloud top. Specifically, the topmost region is directly affected by entrainment, and lidar profiles show clear evidence of entrained air and detrained cloud filament. The transition region below exhibits vertical size sorting of cloud droplets caused by sedimentation. Our results suggest that using a single sedimentation velocity for all cloud droplets, as is done in many atmospheric models, overlooks key physics relevant to the microphysical structure near the cloud top. In conclusion, our conceptual model used to describe these measurements can serve as a step toward improving the current modeling of processes in the cloud top region.
Environmental chamber creates realistic fog and rain effects in aircraft simulator. It reproduces clouds, homogeneous fog, patches of fog, rain and fog, and rain only. It is used with real time digital computer, color computer generated image display that simulates airport lights, or color television camera that produces moving display of airport runway as depicted on model terrain board.
Electron clouds injection and containment by magnetic field in toroidal vacuum chamber, studying causes of cloud instability
Most of our existing knowledge of cloud chemistry in regards to forming secondary organic aerosols (SOA) is based on measurements in bulk aqueous solutions. However, SOA reaction kinetics derived from bulk solution measurements might differ from the kinetics in actual cloud droplets, since turbulent mixing and ionic strengths, and ratio of surface area to volume in individual cloud droplets might vary substantially from bulk solutions in the real atmosphere. Three-dimensional models at various scales have been used to simulate aqueous chemistry. However, most of these models do not resolve turbulence down to the smallest length scales of 1 mm and do not simulate cloud chemistry in individual cloud droplets due to large computational costs. Here we incorporate the formation of isoprene epoxydiol SOA (IEPOX-SOA) in individual droplets within a one-dimensional explicit mixing parcel model (EMPM-Chem). We apply EMPM-Chem to simulate turbulence and droplet-resolved IEPOX-SOA formation using a configuration based on the Michigan Tech Pi chamber. We find that the dissolution of IEPOX gases is weighted more towards larger cloud droplets due to their large liquid water content (compared to smaller droplets), while the conversion of dissolved IEPOX to IEPOX-SOA is much greater within smaller deliquesced haze particles due to their higher acidity and ionic strengths compared to cloud droplets. We also find that as droplet residence times increase in the chamber, e.g., due to increasing ammonium bisulfate seed aerosol injection rates and/or increasing heights of the chamber, formation of IEPOX-SOA increases substantially. Thus, our EMPM-Chem model could be used to design future cloud chambers to maximize SOA production from cloud chemistry. We also apply the EMPM-Chem model to simulate how IEPOX-SOA formation evolves in individual cloud droplets within rising cloudy parcels in the atmosphere. We find that as subsaturated air is entrained into and turbulently mixed with the cloud parcel, evaporation causes a reduction in droplet sizes, which leads to corresponding increases in per droplet ionic strength and acidity. Increased droplet acidity in turn greatly accelerates the kinetics of IEPOX-SOA formation. In conclusion, our results provide key insights into single-cloud-droplet chemistry, suggesting that entrainment mixing may be an important process that increases SOA formation in the real atmosphere.
The Electron-Ion Collider is designed to provide high-luminosity collisions. For the highest lu minosity scenario, the hadron storage ring will host a 275 GeV beam consisting of 1160 bunches with 6.9e10 protons per bunch. Previous work has found that some sections of the hadron storage ring will experience electron cloud buildup if their vacuum chamber does not show a sufficiently low secondary electron emission value. This technical note reviews the electron cloud growth thresholds for the updated screen profile and lattice.
Density of cloud droplets in expansion chamber or static diffusion liquid chamber is measured with error of less than 3 percent by improved photographic technique. Precision is substantial advance over 10 percent accuracy limitation in methods used in past. Method should be useful in pollutant analysis, fine-particle research, and aerosol studies.
A balloon-borne experiment was carried out on April 19, 1987 from Alice Springs, Australia to detect high-energy gamma-rays and hard X-rays from the supernova SN 1987A in the Large Magellanic Cloud. An optical spark chamber for measuring the high-energy gamma-rays and a multiwire proportional counter for measuring the hard X-rays shared a common balloon platform. No positive emission was observed by either detector. The gamma-ray upper limit obtained indicates that either the expanding supernova shell was opaque to gamma-rays at the time of the flight, or that the supernova cosmic ray luminosity was less than about 10 to the 40th erg/s. The X-ray upper limit obtained confirms the opacity of the shell to Comptonized hard X-rays.
This study demonstrates the high-resolution profiling of cloud microphysics in a laboratory chamber using Time-Correlated Single Photon Counting (TCSPC) LiDAR. We present a novel retrieval method to derive vertical extinction (𝜎) profiles, constrained by in situ measurements, to diagnose responses to dry-air entrainment. In clean clouds, the LiDAR signals and retrieved 𝜎 remain relatively uniform, with entrainment effects confined to the upper layer. In contrast, polluted clouds exhibit strong vertical variability and a transition to a water-vapor-limited state. Entrainment significantly enhances the haze number concentration (𝑁ℎ), particularly near the bottom, creating highly height-dependent extinction profiles for polluted clouds. Our results highlight the capability of high-resolution LiDAR in capturing fine-scale vertical inhomogeneities. This approach provides a robust framework for quantifying how aerosol loading modulates entrainment sensitivity, offering new insights into the transition between buffered and water-vapor-limited regimes.
Abstract. Microphysical processes are important for the development of clouds and thus Earth's climate. For example, turbulent fluctuations in the water vapor mixing ratio, r, and temperature, T, cause fluctuations in the saturation ratio, S. Because S is the driving factor in the condensational growth of droplets, fluctuations may broaden the cloud droplet size distribution due to individual droplets experiencing different growth rates. The small-scale turbulent fluctuations in the atmosphere that are relevant to cloud droplets are difficult to quantify through field measurements. We investigate these processes in the laboratory using Michigan Tech's Π Chamber. The Π Chamber utilizes Rayleigh–Bénard convection (RBC) to create the turbulent conditions inherent in clouds. In RBC it is common for a large-scale circulation (LSC) to form. As a consequence of the LSC, the temperature field of the chamber is not spatially uniform. In this paper, we characterize the LSC in the Π Chamber and show how it affects the shape of the distributions of r, T, and S. The LSC was found to follow a single roll with an updraft and downdraft along opposing walls of the chamber. Near the updraft (downdraft), the distributions of T and r were positively (negatively) skewed. At each measuring position, S consistently had a negatively skewed distribution, with the downdraft being the most negative.
A method and apparatus for safely reducing abnormally high intraocular pressure in an eye during a predetermined time interval is presented. This allows maintenance of normal intraocular pressure during glaucoma surgery. According to the invention, a pressure regulator of the spring biased diaphragm type is provided with additional bias by a column of liquid. The height of the column of liquid is selected such that the pressure at a hypodermic needle connected to the output of the pressure regulator is equal to the measured pressure of the eye. The hypodermic needle can then be safely inserted into the anterior chamber of the eye. Liquid is then bled out of the column to reduce the bias on the diaphragm of the pressure regulator and, consequently, the output pressure of the regulator. This lowering pressure of the regulator also occurs in the eye by means of a small second bleed path provided between the pressure regulator and the hypodermic needle. Alternately, a second hypodermic needle may be inserted into the eye to provide a controlled leak off path for excessive pressure and clouded fluid from the anterior chamber.
The effects that aerosol particles have on clouds in Earth’s atmosphere and the role that clouds play in determining the fate of aerosol particles play a crucial role in determining the human experience on this planet. These interwoven interactions can determine whether it rains or snows, is comfortable, hot or cold, or whether the cloud you gaze at in the sky looks like a tiger or a lump of porridge. How clouds mix with the air surrounding them, a process known as entrainment, further affects these processes. We conducted laboratory experiments of aerosol-cloud interactions in a setting in which we can measure the effects of entrainment – the first laboratory experiments since the pioneering work of Latham and Reed in 1977. We measured the effects of entrainment on aerosol-cloud interactions in the Pi Chamber and also used a state-of-the-art large eddy simulation (LES) to investigate processes in fine detail.
During the summer of 2007, as part of the second year of a NASA-funded project in partnership with Christopher Newport University called SPHERE (Students as Professionals Helping Educators Research the Earth), a group of undergraduate students spent 8 weeks in a research internship at or near NASA Langley Research Center. Three students from this group formed the Clouds group along with a NASA mentor (Chambers), and the brief addition of a local high school student fulfilling a mentorship requirement. The Clouds group was given the task of exploring and analyzing ground-based cloud observations obtained by K-12 students as part of the Students' Cloud Observations On-Line (S'COOL) Project, and the corresponding satellite data. This project began in 1997. The primary analysis tools developed for it were in FORTRAN, a computer language none of the students were familiar with. While they persevered through computer challenges and picky syntax, it eventually became obvious that this was not the most fruitful approach for a project aimed at motivating K-12 students to do their own data analysis. Thus, about halfway through the summer the group shifted its focus to more modern data analysis and visualization tools, namely spreadsheets and Google(tm) Earth. The result of their efforts, so far, is two different Excel spreadsheets and a Google(tm) Earth file. The spreadsheets are set up to allow participating classrooms to paste in a particular dataset of interest, using the standard S'COOL format, and easily perform a variety of analyses and comparisons of the ground cloud observation reports and their correspondence with the satellite data. This includes summarizing cloud occurrence and cloud cover statistics, and comparing cloud cover measurements from the two points of view. A visual classification tool is also provided to compare the cloud levels reported from the two viewpoints. This provides a statistical counterpart to the existing S'COOL data visualization tool, which is used for individual ground-to-satellite correspondences. The Google(tm) Earth file contains a set of placemarks and ground overlays to show participating students the area around their school that the satellite is measuring. This approach will be automated and made interactive by the S'COOL database expert and will also be used to help refine the latitude/longitude location of the participating schools. Once complete, these new data analysis tools will be posted on the S'COOL website for use by the project participants in schools around the US and the world.