Search NASA⌕ Search

SEARCH · Search NASA

Results for “Coastal Ocean Modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

A Hyperspectral Inversion Framework for Estimating Absorbing Inherent Optical Properties and Biogeochemical Parameters in Inland and Coastal Waters

The simultaneous remote estimation of biogeochemical parameters (BPs) and inherent optical properties (IOPs) from hyperspectral satellite imagery of globally distributed optically distinct inland and coastal waters is a complex, unsolved, non-unique inverse problem. To tackle this problem, we leverage a machine-learning model termed Mixture Density Networks (MDNs). MDNs outperform operational algorithms by calculating the covariance between the simultaneously estimated products. We train the MDNs on a large ( N = 8237) dataset of co-aligned, in situ measured, hyperspectral remote sensing reflectance (R rs ), BPs, and absorbing IOPs from globally representative optically distinct inland and coastal waters. The estimated IOPs include absorption due to phytoplankton (a ph ), chromophoric dissolved organic matter (a cdom ), and non-algal particles (a nap ). The estimated BPs include chlorophyll-a, total suspended solids, and phycocyanin (PC). MDNs dramatically reduce uncertainty in the retrievals, relative to operational algorithms, when using a 50/50 dataset split, where the MDNs are trained on a randomly selected half of the in situ dataset and validated on the other half. Our model is shown to have higher, or equivalent, generalization performance than the calculated operational algorithms available for all BPs and IOPs (except PC) via a leave-one-out cross-validation assessment. The MDNs are sensitive to uncertainties in the hyperspectral satellite R rs , resulting from instrument noise and atmospheric correction; there is a difference of ~37.4–62.8% (using median symmetric accuracy) between the MDNs’ estimates derived from co-located satellite-derived R rs and in situ R rs . Of the IOPs, a cdom and a nap are less sensitive to uncertainties in hyperspectral satellite imagery relative to a ph , with remote estimates of a ph exhibiting incorrect spectral shape and magnitude relative to in situ measured IOPs. Despite the uncertainties in satellite derived R rs , the spatial distributions of BPs and IOPs in MDN-derived product maps of Lake Erie and the Curonian Lagoon, based on imagery taken with the Hyperspectral Imager for the Coastal Ocean (HICO) and PRecursore Iper-Spettrale della Missione Applicativa (PRISMA), are confirmed via co-aligned in situ measurements and agree with the literature’s understanding of these well-studied regions. The consistency and accuracy of the model on HICO and PRISMA imagery, despite radiometric uncertainties, demonstrate its applicability to future hyperspectral missions, such as the Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) mission, where the simultaneous estimation model will serve as a key part of phytoplankton community composition analysis.

Ryan E. O'Shea↗

Remote sensing of coastal fronts and their effects on oil dispersion

The use of remote sensing techniques to determine the properties of coastal and estuarine fronts, which represent regions of discontinuities and high gradients in ocean physical parameters such as velocity and density, and to assess the influence of such fronts on oil pollutants is discussed. Results of an aircraft and boat verification study of an oil drift and spread model in Delaware Bay are indicated which illustrate the tendency of oil slicks to be attracted to frontal regions, where a denser fluid underlies a lighter fluid giving rise to an inclined interface with convergence zones. Landsat imagery of the bay acquired in order to incorporate frontal information into the interactive computer model is then presented which allows the locations of coastal fronts to be charted throughout a tidal cycle. It is noted that satellite observations of flood-associated fronts on the New Jersey side of the bay and ebb-associated fronts on the Delaware side agree with boat measurements and model predictions, and that the remote tracking of fronts by aircraft and satellites will aid in oil slick clean-up operations.

Klemas, V.↗

Further SEASAT SAR coastal ocean wave analysis

Analysis techniques used to exploit SEASAT synthetic aperture radar (SAR) data of gravity waves are discussed and the SEASAT SAR's ability to monitor large scale variations in gravity wave fields in both deep and shallow water is evaluated. The SAR analysis techniques investigated included motion compensation adjustments and the semicausal model for spectral analysis of SAR wave data. It was determined that spectra generated from fast Fourier transform analysis (FFT) of SAR wave data were not significantly altered when either range telerotation adjustments or azimuth focus shifts were used during processing of the SAR signal histories, indicating that SEASAT imagery of gravity waves is not significantly improved or degraded by motion compensation adjustments. Evaluation of the semicausal (SC) model using SEASAT SAR data from Rev. 974 indicates that the SC spectral estimates were not significantly better than the FFT results.

Kasischke, E. S.↗

Solutions Network Formulation Report. The Potential Contribution of the Ocean Surface Topography Mission to the General NOAA Oil Monitoring Environment

Data collected by the OSTM could be used to provide a solution for the GNOME DST. GNOME, developed by NOAA?s Office of Response and Restoration Hazardous Materials Response Division, geospatially models oil spill trajectories using wind, current, river flow, and tidal data. Data collected by the OSTM would supply information about ocean currents and wind speeds. This Candidate Solution is in alignment with the Coastal Management, Water Management, Disaster Management, Public Health, Ecological Forecasting, and Homeland Security National Applications and will benefit society by improving the capabilities of emergency responders who evaluate an oil spill?s probable threat.

Hilbert, Kent↗

Enhancing New York City's resilience to sea level rise and increased coastal flooding

Accelerating Greenland and Antarctic Ice Sheet ice mass losses and potential West Antarctic Ice Sheet instability may lead to higher than previously anticipated future sea levels. The New York City Panel on Climate Change Antarctic Rapid Ice Melt (ARIM) upper-end, low probability sea level rise (SLR) scenario, which incorporates recent ice loss trends, improved ice sheet-ocean-atmosphere modeling, and potential ice sheet destabilization, projects SLR of up to 2.1 m by the 2080s and up to 2.9 m by 2100, at high greenhouse gas emissions (NPCC, 2019). These results exceed previous high-end SLR projections (90th percentile) of 1.5 m by the 2080s and 1.9 m by 2100, relative to 2000–2004 (NPCC, 2015). By 2100, the 1% annual chance (100-year) floodplain could cover 1/3 of the city's total area under ARIM; around 1/5 of the area could be flooded during monthly high tides. Some low-lying locations could become permanently inundated by late century. Will New York City coastal resiliency initiatives, guided, in part by NPCC findings, suffice for very high sea levels? Additional research is needed to determine technological, environmental, or economic limitations to coastal protection and to decide when and where strategic relocation may become necessary.

Sea level rise↗

Methane Production by Microbial Mats Under Low Sulfate Concentrations

Cyanobacterial mats collected in hypersaline salterns were incubated in a greenhouse under low sulfate concentrations ([SO4]) and examined for their primary productivity and emissions of methane and other major carbon species. Atmospheric greenhouse warming by gases such as carbon dioxide and methane must have been greater during the Archean than today in order to account for a record of moderate to warm paleoclemates, despite a less luminous early sun. It has been suggested that decreased levels of oxygen and sulfate in Archean oceans could have significantly stimulated microbial methanogenesis relative to present marine rates, with a resultant increase in the relative importance of methane in maintaining the early greenhouse. We maintained modern microbial mats, models of ancient coastal marine communities, in artificial brine mixtures containing both modern [SO4=] (ca. 70 mM) and "Archean" [SO4] (less than 0.2 mM). At low [SO4], primary production in the mats was essentially unaffected, while rates of sulfate reduction decreased by a factor of three, and methane fluxes increased by up to ten-fold. However, remineralization by methanogenesis still amounted to less than 0.4 % of the total carbon released by the mats. The relatively low efficiency of conversion of photosynthate to methane is suggested to reflect the particular geometry and chemical microenvironment of hypersaline cyanobacterial mats. Therefore, such mats w-ere probably relatively weak net sources of methane throughout their 3.5 Ga history, even during periods of low- environmental levels oxygen and sulfate.

Bebout, Brad M.↗

Satellite Salinity Observing System: Recent Discoveries and the Way Forward

Advances in L-band microwave satellite radiometry in the past decade, pioneered by ESA's SMOS and NASA's Aquarius and SMAP missions, have demonstrated an unprecedented capability to observe global sea surface salinity (SSS) from space. Measurements from these missions are the only means to probe the very-near surface salinity (top cm), providing a unique monitoring capability for the interfacial exchanges of water between the atmosphere and the upper-ocean, and delivering a wealth of information on various salinity processes in the ocean, linkages with the climate and water cycle, including land-sea connections, and providing constraints for ocean prediction models. The satellite SSS data are complimentary to the existing in situ systems such as Argo that provide accurate depiction of large-scale salinity variability in the open ocean but under-sample mesoscale variability, coastal oceans and marginal seas, and energetic regions such as boundary currents and fronts. In particular, salinity remote sensing has proven valuable to systematically monitor the open oceans as well as coastal regions up to approximately 40 km from the coasts. This is critical to addressing societally relevant topics, such as land-sea linkages, coastal-open ocean exchanges, research in the carbon cycle, near-surface mixing, and air-sea exchange of gas and mass. In this paper, we provide a community perspective on the major achievements of satellite SSS for the aforementioned topics, the unique capability of satellite salinity observing system and its complementarity with other platforms, uncertainty characteristics of satellite SSS, and measurement versus sampling errors in relation to in situ salinity measurements. We also discuss the need for technological innovations to improve the accuracy, resolution, and coverage of satellite SSS, and the way forward to both continue and enhance salinity remote sensing as part of the integrated Earth Observing System in order to address societal needs.

Vinogradova, Nadya↗

Effects of High-frequency Wind Sampling on Simulated Mixed Layer Depth and Upper Ocean Temperature

Effects of high-frequency wind sampling on a near-global ocean model are studied by forcing the model with a 12 hourly averaged wind product and its 24 hourly subsamples in separate experiments. The differences in mixed layer depth and sea surface temperature resulting from these experiments are examined, and the underlying physical processes are investigated. The 24 hourly subsampling not only reduces the high-frequency variability of the wind but also affects the annual mean wind because of aliasing. While the former effect largely impacts mid- to high-latitude oceans, the latter primarily affects tropical and coastal oceans. At mid- to high-latitude regions the subsampled wind results in a shallower mixed layer and higher sea surface temperature because of reduced vertical mixing associated with weaker high-frequency wind. In tropical and coastal regions, however, the change in upper ocean structure due to the wind subsampling is primarily caused by the difference in advection resulting from aliased annual mean wind, which varies with the subsampling time. The results of the study indicate a need for more frequent sampling of satellite wind measurement and have implications for data assimilation in terms of identifying the nature of model errors.

mixed layered depth↗

On large outflows of Arctic sea ice into the Barents Sea

Winter outflows of Arctic sea ice into the Barents Sea are estimated using a 10-year record of satellite ice motion and thickness. The mean winter volume export through the Svalbard/Franz Josef Land passage is 40 km3, and ranges from -280 km3 to 340 km3. A large outflow in 2003 is preconditioned by an unusually high concentration of thick perennial ice over the Nansen Basin at the end of the 2002 summer. With a deep atmospheric low situated over the eastern Barents Sea in winter, the result is an increased export of Arctic ice. The Oct-Mar ice area flux, at 110 x 10 to the third power km3, is not only unusual in magnitude but also remarkable in that >70% of the area is multiyear ice; the ice volume flux at~340 km3 is almost one-fifth of the ice flux through the Fram Strait. Another large outflow of Arctic sea ice through this passage, comparable to that in 2003, is found in 1996. This southward flux of sea ice represents one of two major sources of freshwater in the Barents Sea; the other is the eastward flux of water via the Norwegian Coastal Current. The possible consequences of variable freshwater input on the Barents Sea hydrography and its impact on transformation of Atlantic Water en route to the Arctic Ocean are examined with a 25-year coupled ice-ocean model.

Artic ice↗

The Global S$_1$ Ocean Tide

The small S$_1$ ocean tide is caused primarily by diurnal atmospheric pressure loading. Its excitation is therefore unlike any other diurnal tide. The global character of $S-1$ is here determined by numerical modeling and by analysis of Topex/Poseidon satellite altimeter data. The two approaches yield reasonably consistent results, and large ( $ greater than $l\cm) amplitudes in several regions are further confirmed by comparison with coastal tide gauges. Notwithstanding their excitation differences, S$-1$ and other diurnal tides are found to share several common features, such as relatively large amplitudes in the Arabian Sea, the Sea of Okhotsk, and the Gulf of Alaska. The most noticeable difference is the lack of an S$-1$ Antarctic Kelvin wave. These similarities and differences can be explained in terms of the coherences between near-diurnal oceanic normal modes and the underlying tidal forcings. While gravitational diurnal tidal forces excite primarily a 28-hour Antarctic-Pacific mode, the S$_1$ air tide excites several other near-diurnal modes, none of which has large amplitudes near Antarctica.

Ray, Richard D.↗

Diagnostic modeling of dimethylsulfide production in coastal water west of the Antarctic Peninsula

The rate of gross biological dimethylsulfide (DMS) production at two coastal sites west of the Antarctic Peninsula, off Anvers Island, near Palmer Station, was estimated using a diagnostic approach that combined field measurements from 1 January 2006 through 1 March 2006 and a one-dimensional physical model of ocean mixing. The average DMS production rate in the upper water column (0-60 m) was estimated to be 3.1 +/- 0.6 nM/d at station B (closer to shore) and 2.7 +/- 0.6 nM/d1 at station E (further from shore). The estimated DMS replacement time was on the order of 1 d at both stations. DMS production was greater in the mixed layer than it was below the mixed layer. The average DMS production normalized to chlorophyll was 0.5 +/- nM/d)/(mg cubic m) at station B and 0.7 +/- 0.2 (nM/d)/(mg/cubic m3) at station E. When the diagnosed production rates were normalized to the observed concentrations of total dimethylsulfoniopropionate (DMSPt, the biogenic precursor of DMS), we found a remarkable similarity between our estimates at stations B and E (0.06 +/- 0.02 and 0.04 +/- 0.01 (nM DMS / d1)/(nM DMSP), respectively) and the results obtained in a previous study from a contrasting biogeochemical environment in the North Atlantic subtropical gyre (0.047 =/- 0.006 and 0.087 +/- 0.014 (nM DMS d1)/(nM DMSP) in a cyclonic and anticyclonic eddy, respectively).We propose that gross biological DMS production normalized to DMSPt might be relatively independent of the biogeochemical environment, and place our average estimate at 0.06 +/- 0.01 (nM DMS / d)/(nM DMSPt). The significance of this finding is that it can provide a means to use DMSPt measurements to extrapolate gross biological DMS production, which is extremely difficult to measure experimentally under realistic in situ conditions.

Dimethylsulfide↗

Coastal Zone Color Scanner

The Coastal Zone Color Scanner (CZCS) spacecraft ocean color instrument is capable of measuring and mapping global ocean surface chlorophyll concentration. It is a scanning radiometer with multiband capability. With new electronics and some mechanical, and optical re-work, it probably can be made flight worthy. Some additional components of a second flight model are also available. An engineering study and further tests are necessary to determine exactly what effort is required to properly prepare the instrument for spaceflight and the nature of interfaces to prospective spacecraft. The CZCS provides operational instrument capability for monitoring of ocean productivity and currents. It could be a simple, low cost alternative to developing new instruments for ocean color imaging. Researchers have determined that with global ocean color data they can: specify quantitatively the role of oceans in the global carbon cycle and other major biogeochemical cycles; determine the magnitude and variability of annual primary production by marine phytoplankton on a global scale; understand the fate of fluvial nutrients and their possible affect on carbon budgets; elucidate the coupling mechanism between upwelling and large scale patterns in ocean basins; answer questions concerning the large scale distribution and timing of spring blooms in the global ocean; acquire a better understanding of the processes associated with mixing along the edge of eddies, coastal currents, western boundary currents, etc., and acquire global data on marine optical properties.

Johnson, B.↗

Lidar observations and modeling of cold air outbreaks during MASEX and GALE

As part of MASEX and GALE a number of research flights were carried out over the Marine Boundary Layer (MBL) during periods when extremely cold and dry continental air was flowing out over the warm coastal waters at the east coast of the U.S. Such periods, which are named cold air outbreaks are characterized by massive warming and moistening of the MBL resulting in rapid entrainment conditions. As the MBL deepens as a function of fetch over the ocean, clouds develop. The line of cloud formation typically follows the coast line closely as has been observed many times from satellite imagery. The backscatter data from the NASA Goddard airborne lidar, which was used to measure the depth of the MBL in great detail, is ideally suited to verify parametrized models of boundary layer growth rate. The data indicates that the deepening MBL gradually develops clouds at its top. Those clouds form an integral part of the MBL and exercise an important influence on the energy cycle within the MBL. It is suggested that the rapid entrainment observed during overcast conditions represent an increase in efficiency of conversion of available turbulence kinetic energy into entrainment energy.

Boers, R.↗

Towards an Improved Understanding of the Antarctic Coastal Zone and Its Contribution to Future Global Sea Level

Understanding the coastal zone of the Antarctic Ice Sheet (AIS), where it interacts with the Southern Ocean and warmer air masses, is crucial for predicting Antarctica's influence on the global climate and sea level. This region has multiple tipping mechanisms that could trigger large, rapid, and potentially irreversible changes in the AIS, the Southern Ocean and their global connections in the coming centuries. The AIS remains the largest source of uncertainty in future sea-level projections. Bed topography beneath the ice shelves and the coastal ice sheet is not yet well documented, and is a major source of this uncertainty. This review assesses current knowledge of the coastal zone and highlights methods to investigate it, including aerogeophysical surveys, ground- and ship-based measurements, satellite observations, and computer modeling. An ensemble analysis of published bed topography data sets identifies significant data gaps and their regional distribution, framed in the context of current ice-sheet behavior and potential instability. We propose scientific priorities and guidelines for future aerogeophysical surveys, advocating for a comprehensive, coordinated international effort to build a next-generation data set of Antarctic bed properties. Such an initiative would significantly advance understanding of the role of coastal processes in ice-sheet dynamics, reducing uncertainties in sea-level rise projections and improving predictions of future ocean and climate changes.

Kenichi Matsuoka↗

The Role of Cloud Contamination, Aerosol Layer Height and Aerosol Model in the Assessment of the OMI Near-UV Retrievals Over the Ocean

Retrievals of aerosol optical depth (AOD) at 388 nm over the ocean from the Ozone Monitoring Instrument (OMI) two-channel near-UV algorithm (OMAERUV) have been compared with independent AOD measurements. The analysis was carried out over the open ocean (OMI and MODerate-resolution Imaging Spectrometer (MODIS) AOD comparisons) and over coastal and island sites (OMI and AERONET, the AErosol RObotic NETwork). Additionally, a research version of the retrieval algorithm (using MODIS and CALIOP (Cloud-Aerosol Lidar with Orthogonal Polarization) information as constraints) was utilized to evaluate the sensitivity of the retrieval to different assumed aerosol properties. Overall, the comparison resulted in differences (OMI minus independent measurements) within the expected levels of uncertainty for the OMI AOD retrievals (0.1 for AOD less than 0.3, 30% for AOD greater than 0.3). Using examples from case studies with outliers, the reasons that led to the observed differences were examined with specific purpose to determine whether they are related to instrument limitations (i.e., pixel size, calibration) or algorithm assumptions (such as aerosol shape, aerosol height). The analysis confirms that OMAERUV does an adequate job at rejecting cloudy scenes within the instrument's capabilities. There is a residual cloud contamination in OMI pixels with quality flag 0 (the best conditions for aerosol retrieval according to the algorithm), resulting in a bias towards high AODs in OMAERUV. This bias is more pronounced at low concentrations of absorbing aerosols (AOD 388 nm approximately less than 0.5). For higher aerosol loadings, the bias remains within OMI's AOD uncertainties. In pixels where OMAERUV assigned a dust aerosol model, a fraction of them (less than 20 %) had retrieved AODs significantly lower than AERONET and MODIS AODs. In a case study, a detailed examination of the aerosol height from CALIOP and the AODs from MODIS, along with sensitivity tests, was carried out by varying the different assumed parameters in the retrieval (imaginary index of refraction, size distribution, aerosol height, particle shape). It was found that the spherical shape assumption for dust in the current retrieval is the main cause of the underestimate. In addition, it is demonstrated in an example how an incorrect assumption of the aerosol height can lead to an underestimate. Nevertheless, this is not as significant as the effect of particle shape. These findings will be incorporated in a future version of the retrieval algorithm.

aerosols↗

Spatial and Temporal Characterization of Cyanobacteria Blooms in the Mississippi Sound and Their Relationship to the Bonnet Carré Spillway Openings

During the spring and summer of 2019, an unprecedented cyanobacterial harmful algal bloom (cyanoHAB) was responsible for beach advisories on 25 beaches along the Mississippi Sound for over 3 months. Due to the preceding heavy rainfall and flooding within the Mississippi River watershed, for the first time in history, the Bonnet Carré Spillway (BCS) opened twice in one year during 2019. The coastal cyanoHAB coincided with the second BCS opening. The main objectives of this study were: (1) to investigate the potential for using the National Aeronautics and Space Administration (NASA) ocean color standard Cyanobacteria Index (CIcyano) algorithm to characterize the spatial and temporal extent of the 2019 cyanoHAB; (2) to couple the CIcyano data with river discharge, salinity, and modeled-wind data to study the conditions leading to the cyanoHAB and factors aiding the advection and persistence of the bloom within the Mississippi Sound, including a possible relationship to the BCS; (3) to further investigate the relationship with the BCS by repeating the methods using data from 2018, which was a year when the BCS was opened but no evidence of cyanoHABs was reported along the Mississippi coast. Weekly means and monthly frequency CIcyano images, river discharge, salinity, and modeled-wind data from February to September of 2018 and 2019 were analyzed, which coincide with three BCS openings. In March 2018, a cyanobacteria bloom was observed within Lake Pontchartrain coinciding with the BCS opening; however, the month-long bloom was contained to the lake. Two distinct cyanoHABs were observed in 2019 and both blooms were advected into the Mississippi Sound, and likely contributed to the 3-month-long beach water advisories of 2019 along the Mississippi coastline. From March to mid-July 2019, salinity at stations within the Mississippi Sound was consistently near zero indicating high levels of freshwater. During that time, winds were predominantly northwestward, preventing the BCS waters from flushing into the Mississippi Shelf and resulting in BCS waters remaining longer within the estuarine lakes and Mississippi Sound. Although the BCS had an undeniable impact on the presence of the coastal cyanoHAB of 2019, other variables including wind direction, water flow, mixing, and persistence of freshwater within the Sound can determine the intensity and extent of the cyanoHABs. Coupling in situ phytoplankton information from freshwater water bodies to the marine continuum along with water flow, wind data, and satellite imagery could help identify cyanoHABs at early stages and forecast their trajectory and potential impacts on coastal areas.

Bonnet Carré Spillway↗

Assessment of Urbanization on the Integrated Land-Ocean-Atmosphere Environment in Coastal Metropolis in Preparation for HyspIRI

The need for comprehensive studies of the relationships between past and projected changes of regional climate and human activity in comple x urban environments has been well established. The HyspIRI preparato ry airborne activities in California, associated science and applicat ions research, and eventually HyspIRI itself provide an unprecedented opportunity for development and implementation of an integrated data and modeling analysis system focused on coastal urban environments. We will utilize HyspIRI preparatory data collections in developing ne w remote sensing-based tools for investigating the integrated urban e nvironment, emphasizing weather, climate, and energy demands in compl ex coastal cities.

Sequera, Pedro↗

NASA Tech Briefs, April 2012

Topics include: Computational Ghost Imaging for Remote Sensing; Digital Architecture for a Trace Gas Sensor Platform; Dispersed Fringe Sensing Analysis - DFSA; Indium Tin Oxide Resistor-Based Nitric Oxide Microsensors; Gas Composition Sensing Using Carbon Nanotube Arrays; Sensor for Boundary Shear Stress in Fluid Flow; Model-Based Method for Sensor Validation; Qualification of Engineering Camera for Long-Duration Deep Space Missions; Remotely Powered Reconfigurable Receiver for Extreme Environment Sensing Platforms; Bump Bonding Using Metal-Coated Carbon Nanotubes; In Situ Mosaic Brightness Correction; Simplex GPS and InSAR Inversion Software; Virtual Machine Language 2.1; Multi-Scale Three-Dimensional Variational Data Assimilation System for Coastal Ocean Prediction; Pandora Operation and Analysis Software; Fabrication of a Cryogenic Bias Filter for Ultrasensitive Focal Plane; Processing of Nanosensors Using a Sacrificial Template Approach; High-Temperature Shape Memory Polymers; Modular Flooring System; Non-Toxic, Low-Freezing, Drop-In Replacement Heat Transfer Fluids; Materials That Enhance Efficiency and Radiation Resistance of Solar Cells; Low-Cost, Rugged High-Vacuum System; Static Gas-Charging Plug; Floating Oil-Spill Containment Device; Stemless Ball Valve; Improving Balance Function Using Low Levels of Electrical Stimulation of the Balance Organs; Oxygen-Methane Thruster; Lunar Navigation Determination System - LaNDS; Launch Method for Kites in Low-Wind or No-Wind Conditions; Supercritical CO2 Cleaning System for Planetary Protection and Contamination Control Applications; Design and Performance of a Wideband Radio Telescope; Finite Element Models for Electron Beam Freeform Fabrication Process Autonomous Information Unit for Fine-Grain Data Access Control and Information Protection in a Net-Centric System; Vehicle Detection for RCTA/ANS (Autonomous Navigation System); Image Mapping and Visual Attention on the Sensory Ego-Sphere; HyDE Framework for Stochastic and Hybrid Model-Based Diagnosis; and IMAGESEER - IMAGEs for Education and Research.

Source record↗