Search NASA⌕ Search

SEARCH · Search NASA

Results for “Commercial Supersonics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Landing and Takeoff (LTO) noise aspects of supersonic Flight

Landing and Takeoff (LTO) noise of proposed commercial supersonic vehicles will be compatible with the fleet currently flying today. The aero technology to accomplish this exists, but the lack of noise data for these technologies means there is significant uncertainty about exactly how loud the aircraft will be. This uncertainty is creating a stumbling block in efforts to establish noise regulations for the new supersonic market. The presentation shows NASA’s efforts to quantify this uncertainty and to reduce it using physics-based simulations over the next three years. Note: No voice included or available for this presentation.

James Bridges↗
NASA NTRSDate not supplied

Optimization of a Parametric Lobe Mixer for Internally Mixed Nozzles

The results of the first phase of an optimization study on a parametric procedurally-generated lobe mixer are presented. This mixer is part of a dual-stream plug nozzle system, designed under NASA’s CST project for use in near-term commercial supersonic applications. Data was obtained numerically using NASA’s in-house CFD code FUN3D and analyzed to determine mixer performance. Phase I of the study examined five independently-variable geometric parameters describing the lobe mixer. Methods of Design of Experiments (DoE) were used to obtain a parametric model to quickly evaluate mixer performance and determine an optimum configuration. Mixers that induced strong axial vorticity and shear layers without causing flow separation were found to perform best, with exit temperature variance highly inversely correlated to mixing effectiveness.

Lobe mixer↗
NASA NTRSDate not supplied

Optimization of a Parametric Lobe Mixer for Internally Mixed Nozzles

The results of the first phase of an optimization study on a parametric procedurally-generated lobe mixer are presented. This mixer is part of a dual-stream plug nozzle system, designed under NASA’s CST project for use in near-term commercial supersonic applications. Data was obtained numerically using NASA’s in-house CFD code FUN3D and analyzed to determine mixer performance. Phase I of the study examined five independently-variable geometric parameters describing the lobe mixer. Methods of Design of Experiments (DoE) were used to obtain a parametric model to quickly evaluate mixer performance and determine an optimum configuration. Mixers that induced strong axial vorticity and shear layers without causing flow separation were found to perform best, with exit temperature variance highly inversely correlated to mixing effectiveness.

Lobe Mixer↗
NASA NTRS1994

The evolution of the high-speed civil transport

Current research directed toward the technology requirements for a high-speed civil transport (HSCT) airplane is an outgrowth of many years of activity related to air transportation. The purpose was to review some of the events that provided the background upon which current research programs are built. The review will include the subsonic era of transport aircraft and some events of the supersonic era that are related to the development of commercial supersonic transport aircraft. These events include the early NASA in-house studies and industry evaluations, the U.S. Supersonic Transport (SST) Program, the follow-on NASA supersonic cruise research programs, and the issuance of the National Aeronautical Research and Development (R&D) goals. Observations are made concerning some of the factors, both technical and nontechnical, that have had an impact on HSCT studies.

Spearman, M. Leroy↗
NASA NTRSDate not supplied

Nearfield Anisotropic Mesh Adaptation for the Third AIAA Sonic Boom Workshop

Sonic boom prediction is critical for the development of low-boom supersonic aircraft and encouraging a replacement of the overland commercial supersonic ban with a certification standard. The Third AIAA Sonic Boom Workshop nearfield test cases provide a unique opportunity to review anisotropic adaptive-mesh strategies for complex geometries with important propulsion interaction effects. Anisotropic metrics formulated to control estimated Mach interpolation and integrated nearfield pressure signature (goal-oriented) errors are compared with the results obtained on workshop-provided meshes. Detailed flow solutions and mesh renderings are combined with computational schlieren images to reveal the complex interactions present in a shock-plume interaction wind tunnel model and a prototype of the Low-Boom Flight Demonstrator. A favorable comparison of independent implementations of the entire simulation process provides evidence that each process is implemented correctly and sets a solid foundation for confidence in the nearfield prediction of each method.

sonic boom↗
NASA NTRS2020

Global Environmental Impact of Supersonic Cruise Aircraft in the Stratosphere

We analyze the climate and ozone impacts of commercial supersonic aircraft using state-of-the-science modeling capabilities ranging from plume to global scale. A scenario-based approach captures variability and uncertainty in the impacts with market adoption, aircraft design choices and regulatory scenarios, focusing on different overland flight restrictions. We find that the notional aircraft considered could attract a market of up to 2.5% of year-2035 seat-kilometers. Overland flight restrictions reduce this market by 80–100%. In comparison to subsonic aircraft, contrails are found to be∼10 times less likely to form behind supersonic jets. A Mach 1.6 jet cruising at 17 km altitude causes 0.85 mDU of depletion per billion seat-km, with 54% of this impact attributable to sulfur emissions and 35% to NOx emissions. Asa result, we find a net non-CO2, non-contrail radiative forcing of−0.020 mW m−2per billion seat-km. Long-term adjoint simulations show that net ozone-neutral cruise can be achieved by flying near 14 km, subject to fuel sulfur content and NOx emissions index.

supersonic, Stratosphere, environment↗
NASA NTRS2021

Global Environmental Impact of Supersonic Cruise Aircraft in the Stratosphere

We analyze the climate and ozone impacts of commercial supersonic aircraft using state-of-the-science modeling capabilities ranging from plume to global scale. A scenario-based approach captures variability and uncertainty in the impacts with market adoption, aircraft design choices and regulatory scenarios, focusing on different overland flight restrictions. We find that the notional aircraft considered could attract a market of up to 2.5% of year-2035 seat-kilometers. Overland flight restrictions reduce this market by 80–100%. In comparison to subsonic aircraft, contrails are found to be ∼ 10 times less likely to form behind supersonic jets. A Mach 1.6 jet cruising at 17 km altitude causes 0.85 mDU of depletion per billion seat-km, with 54% of this impact attributable to sulfur emissions and 35% to NOx emissions. As a result, we find a net non-CO2, non-contrail radiative forcing of −0.020mWm−2 per billion seat-km. Long-term adjoint simulations show that net ozone-neutral cruise can be achieved by flying near 14 km, subject to fuel sulfur content and NOx emissions index.

Raymond L Speth↗
NASA NTRS1981

The supersonic fan engine: An advanced concept in supersonic cruise propulsion

Engine performance and mission studies were carried out for turbofan engines equipped with supersonic through-flow fans. The mission was for a commercial supersonic transport with a Mach 2.32 capability. The advantages of the supersonic fan engines are discussed in terms of mission range comparisons with other engine types. The effects of fan efficiency, inlet losses, and engine weight on engine performance and mission range are shown. The range of a supersonic transport with supersonic fan engines could be 10 to 20 percent better than with other types having the same technology core.

Franciscus, L. C.↗
NASA NTRSDate not supplied

Study of a Plug Nozzle for Supersonic Aircraft Concepts

A plug nozzle with a cylindrical cowl is studied. The geometry is adopted following commercial supersonic aircraft concepts considered in an ongoing NASA program. For the given cowl, the plug geometry is varied that includes shapes developed by a numerical optimization study as well as porous plugs. Experimental data on noise and flow field are discussed with an eye for minimum noise at low nozzle pressure ratios (NPR2) representing landing and takeoff (LTO) conditions. NPR up to about 4.7 is covered in the experiments. Limited thrust data with accompanying numerical simulation results are also presented. Results show that a plug designed for optimum thrust at cruise is noisier while a plug designed for optimum thrust at LTO has less noise, throughout the NPR range covered. The results also show that a plug nozzle can generate transonic tones and excess broadband noise (EBBN) at lower NPR, apart from well-known screech tones and broadband shock associated noise (BBSN) at higher NPR. A long porous plug is found to effectively suppress all these aberrant noise components while suffering less than 1% loss in thrust coefficient.

Jets↗
NASA NTRSDate not supplied

Study of a Plug Nozzle for Supersonic Aircraft Concepts

A plug nozzle with a cylindrical cowl is studied. The geometry is adopted following commercial supersonic aircraft concepts considered in an ongoing NASA program. For the given cowl, the plug geometry is varied that includes shapes developed by a numerical optimization study as well as porous plugs. Experimental data on noise and flow field are discussed with an eye for minimum noise at low nozzle pressure ratios (NPR2) representing landing and takeoff (LTO) conditions. NPR up to about 4.7 is covered in the experiments. Limited thrust data with accompanying numerical simulation results are also presented. Results show that a plug designed for optimum thrust at cruise is noisier while a plug designed for optimum thrust at LTO has less noise, throughout the NPR range covered. The results also show that a plug nozzle can generate transonic tones and excess broadband noise (EBBN) at lower NPR, apart from well-known screech tones and broadband shock associated noise (BBSN) at higher NPR. A long porous plug is found to effectively suppress all these aberrant noise components while suffering less than 1% loss in thrust coefficient.

Jets↗
NASA NTRS1988

Radiation safety in commercial air traffic - A need for further study

The problem of radiation exposure of crewmembers in high altitude supersonic commercial aircraft is addressed. As a result of recent changes in the quality factors for radiological protection, it is found that worst case estimates of radiation exposure are now well above the exposure limits of the general population, and a reassessment of radiation impact on commercial aviation is needed, if the proposed quality factors are adopted. Calculations are presented from a study on neutron dosage equivalent rates. It is shown that a crew flying at altitudes near 13 km (43,000 ft) for 40 hr/mo would receive exposure levels of 47-75 Sv/yr, and it is suggested that such crewmembers be considered as radiation workers, rather than general population members. However, since present exposure estimates need to be improved, and the maximum permissible dose limits are currently under revision, the final exposure limits are, as yet, unclear, suggesting the need for further study to clarify the work status of commercial aircrews.

Wilson, John W.↗
NASA NTRSDate not supplied

Cumulative Noise Metric Design Considerations for the Nasa Quesst Community Test Campaign With the X-59 Aircraft

The National Aeronautics and Space Administration (NASA) plans to collect X-59 aircraft dose-response data to inform international regulators in their efforts to establish acceptable noise standards to replace the current ban on overland supersonic commercial flight. For this upcoming community test campaign, the sound level from a supersonic overflight of the X-59 constitutes a single-event dose, and an end-of-day survey after multiple flight events constitutes a cumulative response. This study considers how X-59 community tests could be designed to explore the relationship between multiple single events and cumulative annoyance response. Presently, a day-night level summation of single-event doses formulates the cumulative dose; however, a generalization method may improve the understanding of the linkage between multiple single events and cumulative response. This work utilizes an analysis method that employs a parameter to vary the cumulative dose metric such that it can represent the loudest single event, remain as the day-night level summation, or be more responsive to the number of events. The analysis is demonstrated on simulated dose-response datasets derived from previous NASA field studies and from expectations of X-59 community tests. Results demonstrate that certain dose designs are more efficient than others in determining the analysis parameter.

dose-response modeling↗
NASA NTRSDate not supplied

Cumulative Noise Metric Design Considerations for the NASA Quesst Community Test Campaign With the X-59 Aircraft

The National Aeronautics and Space Administration (NASA) plans to collect X-59 aircraft dose-response data to inform international regulators in their efforts to establish acceptable noise standards to replace the current ban on overland supersonic commercial flight. For this upcoming community test campaign, the sound level from a supersonic overflight of the X-59 constitutes a single-event dose, and an end-of-day survey after multiple flight events constitutes a cumulative response. This study considers how X-59 community tests could be designed to explore the relationship between multiple single events and cumulative annoyance response. Presently, a day-night level summation of single-event doses formulates the cumulative dose; however, a generalization method may improve the understanding of the linkage between multiple single events and cumulative response. This work utilizes an analysis method that employs a parameter to vary the cumulative dose metric such that it can represent the loudest single event, remain as the day-night level summation, or be more responsive to the number of events. The analysis is demonstrated on simulated dose-response datasets derived from previous NASA field studies and from expectations of X-59 community tests. Results demonstrate that certain dose designs are more efficient than others in determining the analysis parameter.

dose-response modeling↗
NASA NTRSDate not supplied

Noise Prediction of Multi-stream Internally Mixed Jets with External and Internal Plugs using Large-Eddy Simulation

This paper presents results from ongoing research on jet noise prediction using wall-modeled large eddy simulations (WMLES) conducted within the Launch Ascent and Vehicle Aerodynamics (LAVA) computational framework. The study primarily focuses on the aeroacoustic implications of multi-stream nozzle configurations with internal mixing and both internal and external plugs, at a Reynolds number of 1×10 6 based on the nozzle exit diameter. While internal mixing nozzles have long been considered for jet noise reduction, the complexities of their impact on overall noise levels remain insufficiently understood. This research applies established best practices for WMLES to these complex nozzle configurations, aiming to assess their efficacy and identify limitations in accurately predicting noise behaviors. Through detailed comparisons with experimental data obtained from NASA’s Glenn Research Center, initial findings underscore the challenges inherent in current simulation practices when confronted with intricate geometric and operational conditions. Responding to these challenges, the study explores innovative computational approaches to rectify discrepancies noted between experimental outcomes and CFD predictions. Once example is the introduction of a resonating sound source in the simulation environment to mimic potential unobserved acoustic phenomena.A second example is the strategic modifications to the geometry of external plugs to account for real-world deformations caused by heating and gravity. These novel strategies aim to enhance the accuracy and reliability of noise predictions from supersonic jets, advancing our understanding and capability to effectively reduce jet noise in commercial supersonic aircraft

CST↗
NASA NTRS1989

Supersonic through-flow fan engine and aircraft mission performance

A study was made to evaluate potential improvement to a commercial supersonic transport by powering it with supersonic through-flow fan turbofan engines. A Mach 3.2 mission was considered. The three supersonic fan engines considered were designed to operate at bypass ratios of 0.25, 0.5, and 0.75 at supersonic cruise. For comparison a turbine bypass turbojet was included in the study. The engines were evaluated on the basis of aircraft takeoff gross weight with a payload of 250 passengers for a fixed range of 5000 N.MI. The installed specific fuel consumption of the supersonic fan engines was 7 to 8 percent lower than that of the turbine bypass engine. The aircraft powered by the supersonic fan engines had takeoff gross weights 9 to 13 percent lower than aircraft powered by turbine bypass engines.

Franciscus, Leo C.↗
NASA NTRS1976

An advanced concept that promises ecological and economic viability

The actuality of supersonic commercial service being provided by Concorde is demonstrating to the world the advantages offered by supersonic travel for both business and recreation. Public acceptance will gradually and persistently stimulate interest to proceed with a second generation design that meets updated economic and ecological standards. It is estimated that this concept could operate profitably on world-wide routes with a revenue structure based upon economy fares. Airplanes will meet all present day ecological requirements regarding noise and emissions.

Wright, B. R.↗
NASA NTRS1975

Advanced supersonic propulsion study, phase 2

A continuation of the NASA/P and WA study to evaluate various types of propulsion systems for advanced commercial supersonic transports has resulted in the identification of two very promising engine concepts. They are the Variable Stream Control Engine which provides independent temperature and velocity control for two coannular exhaust streams, and a derivative of this engine, a Variable Cycle Engine that employs a rear flow-inverter valve to vary the bypass ratio of the cycle. Both concepts are based on advanced engine technology and have the potential for significant improvements in jet noise, exhaust emissions and economic characteristics relative to current technology supersonic engines. Extensive research and technology programs are required in several critical areas that are unique to these supersonic Variable Cycle Engines to realize these potential improvements. Parametric cycle and integration studies of conventional and Variable Cycle Engines are reviewed, features of the two most promising engine concepts are described, and critical technology requirements and required programs are summarized.

Howlett, R. A.↗