Search NASA⌕ Search

SEARCH · Search NASA

Results for “Crystallographic properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Structure and Magnetic Properties of Homoleptic Trivalent Tris(alkyl)lanthanides

Six new solvent-free, homoleptic paramagnetic tris(alkyl)lanthanides Ln{C(SiHMe 2 ) 3 } 3 (1Ln) and Ln{C(SiHMe 2 ) 2 Ph} 3 (2Ln) (Ln = Gd, Dy, and Er) were synthesized to investigate the magnetic properties of 4f organometallic compounds stabilized by secondary Ln←H–Si and benzylic interactions. The unit cell of 1Gd contains one independent molecule (Z = 2), while 1Dy and 1Er crystallize with four independent isostructural molecules per unit cell (Z = 16). In all molecules, as in other 1Ln compounds, the three tris(dimethylsilyl)methyl ligands form a trigonal planar LnC 3 core, and six secondary interactions involving Ln←H–Si bonding in Ln{C(SiHMe 2 ) 3 } 3 form above and below the equatorial plane. Two and five crystallographically independent molecules of each 2Ln (2Gd, Z = 8; 2Dy, Z = 20) form with three π-coordinated phenyl groups in addition to either one or two secondary Ln←H–Si interactions per molecule. The packing of these midseries organolanthanide compounds contrasts the single crystallographically unique molecules in previously reported La{C(SiHMe 2 ) 3 } 3 (1La, Z = 2, Z' = 1) and La{C(SiHMe 2 ) 2 Ph} 3 (2La, Z = 2, Z' = 1/3). 2La doped with 2Dy can adopt the crystallographic structure of 2La, which promotes magnetic properties, namely a higher χ m T value at low temperatures as well as stronger magnetic anisotropy. The ac susceptibility data for 10% 2Dy doped into 2La suggests slow relaxation at low temperatures with a relaxation barrier of ~45 K. The computed saturated magnetization of 1Er (M ≈ 4.5 μ B ) and 1Dy (M ≈ 6 μ B ) matches the experimental values, while the computed value for 2Dy better matches the value measured for 2Dy diluted in 2La (M ≈ 5 μ B ). Gas-phase calculations predict that the ground-state and first excited-state multiplet separations are larger for 1Er than 2Er, while the ordering for dysprosium is 1Dy > 2Dy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

Properties of ferrites important to their friction and wear behavior

Environmental, chemical and crystallographical effects on the fundamental nature on friction and wear of the ferrites in contact with metals, magnetic tapes and themselves are reviewed. The removal of adsorbed films from the surfaces of ferrites results in very strong interfacial adhesion and high friction in ferrite to metal and ferrite to magnetic tape contacts. The metal ferrite bond at the interface is primarily a chemical bond between the metal atoms and the large oxygen anions in the ferrite surface, and the strength of these bonds is related to the oxygen to metal bond strength in the metal oxide. The more active the metal, the higher is the coefficient of friction. Not only under adhesive conditions, but also under abrasive conditions the friction and wear properties of ferrites are related to the crystallographic orientation. With ferrite to ferrite contact the mating of highest atomic density (most closely packed) direction on matched crystallographic planes, that is, 110 directions on /110/planes, results in the lowest coefficient of friction.

Miyoshi, K.↗
DOE OSTI2024

Solidification and crystallographic texture modeling of laser powder bed fusion Ti-6Al-4V using finite difference-monte carlo method

Laser powder bed fusion (LPBF) additive manufacturing makes near-net-shaped parts with reduced material cost and time, rising as a promising technology to fabricate Ti-6Al-4V, a widely used titanium alloy in aerospace and medical industries. However, LPBF Ti-6Al-4V parts produced with 67° rotation between layers, a scan strategy commonly used to reduce microstructure and property inhomogeneity, have varying grain morphologies and weak crystallographic textures that change depending on processing parameters. Here, this study predicts LPBF Ti-6Al-4V solidification at three energy levels using a finite difference-Monte Carlo method and validates the simulations with large-area electron backscatter diffraction (EBSD) scans. The developed model accurately shows that a <001> texture forms at low energy and a <111> texture occurs at higher energies parallel to the build direction but with a lower strength than the textures observed from EBSD. A validated and well-established method of combining spatial correlation and general spherical harmonics representation of texture is developed to calculate a difference score between simulations and experiments. The quantitative comparison enables effective fine-tuning of nucleation density (N 0 ) input, which shows a nonlinear relationship with increasing energy level. Future improvements in texture prediction code and a more comprehensive study of N 0 with different energy levels will further advance the optimization of LPBF Ti-6Al-4V components. These developments contribute a novel understanding of crystallographic texture formation in LPBF Ti-6Al-4V, the development of robust model validation and calibration pipeline methodologies, and provide a platform for mechanical property prediction and process parameter optimization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Unraveling Site Selective Magnetic Properties of Cobalt Sites in Critical Elements Lean RE(TM)5 Magnet Materials

We report here our discovery of crystallographic and interstitial sites and onsite electron correlation propelled intrinsic and derived permanent magnetic properties of critical elements lean RE(TM) 5 (RE = La, Ce and TM = Fe, Co) magnet materials. A full potential linearized augmented plane wave (FP-LAPW) method within the local density approximation (LDA) is used to investigate and analyze the electronic structure and magnetism of these RE(TM) 5 type structures. To better correlate the experimental results, the effective Coulomb (U) and exchange (J) interactions (Hubbard parameters) are crucial at the transition metal sites. Results show that the main propeller of magnetic anisotropy in these compounds is the cobalt atoms at the 2c sites not the 3g sites. This site-specific property and site preference energetics are used to replace 3g sites with non-critical elements such as iron that exhibits a larger magnetic moment. Based on this strategic replacement, we predict two new compounds that have a larger hardness parameter with a relatively large energy product due to the atomic dilution caused by interstitial addition of nitrogen in the compounds: CeCo 2 Fe 3 N 2 and LaCo 2 Fe 3 N 2 .

Rare-earths↗
DOE OSTI2022

Growth of Crystallographically Aligned PbSe Films of Controlled Thickness on Amorphous Substrates

Lead selenide (PbSe) has extensively been investigated due to its thermoelectric and photoconductive properties. More recently, predictions of emergent properties have focused synthetic efforts on preparing ultra-smooth layers of crystallographically aligned PbSe layers with a thickness equal to an integer number of monolayers. While rough films are typically formed through Volmer-Weber growth on heated substrates, we report the data presented herein indicates that a crystallographically aligned, ultrathin layer with a defined number of PbSe layers forms on mostly amorphous Mo-Se and V-Se coated Si substrates during nominally room temperature deposition. Since the films are uniform in thickness, the number of PbSe bilayers formed depends on the amount of Pb (or Se) deposited. If the amount of Pb deposited is close to that required for an integral number of unit cells and there is sufficient Se, Laue oscillations are present in the as-deposited samples. The Laue oscillations reflect the quality and uniformity of the crystalline PbSe domains. This study demonstrates that the substrate does not need to be crystalline to form uniform, crystallographically aligned, integer monolayer thick PbSe films. These results suggest that tuning the strength of interactions be-tween substrate and growing film is necessary to form smooth, crystallographically aligned layers. The substrate does not need to be crystalline for these interactions to be strong enough to enable growth of crystallographically aligned films.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Critical Review of Platinum Group Metal-Free Materials for Water Electrolysis: Transition from the Laboratory to the Market : Earth-abundant borides and phosphides as catalysts for sustainable hydrogen production

To combat the global problem of carbon dioxide emissions, hydrogen is the desired energy vector for the transition to environmentally benign fuel cell power. Water electrolysis (WE) is the major technology for sustainable hydrogen production. Despite the use of renewable solar and wind power as sources of electricity, one of the main barriers for the widespread implementation of WE is the scarcity and high cost of platinum group metals (pgms) that are used to catalyse the cathodic hydrogen evolution reaction (HER) and the anodic oxygen evolution reaction (OER). Hence, the critical pgm-based catalysts must be replaced with more sustainable alternatives for WE technologies to become commercially viable. This critical review describes the state-of-the-art pgm-free materials used in the WE application, with a major focus on phosphides and borides. Several emerging classes of HER and OER catalysts are reviewed and detailed structure-property correlations are comprehensively summarised. The influence of the crystallographic and electronic structures, morphology and bulk and surface chemistry of the catalysts on the activity towards OER and HER is discussed.

Chemistry↗
DOE OSTI2021

Enhanced ferroelectric and piezoelectric properties of BCT-BZT at the morphotropic phase boundary driven by the coexistence of phases with different symmetries

The discovery of lead-free piezoelectric materials is crucial for future information and energy storage applications. Enhanced piezoelectric and other physical properties are commonly observed near the morphotropic phase boundary (MPB) composition of ferroelectric solid solutions. The (1 – x)Ba(Zr 0.2 Ti 0.8 )O 3 -x(Ba0.7Ca0.3)TiO 3 (BZT-xBCT) system exhibits a large electromechanical response around its MPB region at x = 0.5. Here, we report experimental and theoretical results of BZT-xBCT over a wide composition range (0.3 ≤ x ≤ 1.0). X-ray diffraction and Raman spectroscopy studies indicate a composition-induced structural phase transition from a rhombohedral (R3m) phase at x ≤ 0.4 to a tetragonal (P4mm) phase at x ≥ 0.6 through a multiphase coexistence region at 0.45 ≤ x ≤ 0.55 involving orthorhombic + tetragonal (Amm2 + P4mm) phases. First-principles calculations elucidate the phase competition in the coexistence region. The critical composition (x = 0.5) displays enhanced dielectric, ferroelectric, and piezoelectric properties, where notably d 33 ~ 320 pC/N. This paper provides clear evidence of Amm2+P4mm crystallographic phases in the MPB region, which is responsible for the improved functional properties.

MPB↗
DOE OSTI2023

Computational Study of Mixing Solid Materials for CO2 Capture Technology

CO2 is one of the major combustion products that, once released into the air, can contribute to global climate change. Solid sorbents have been reported as promising candidates for CO2 sorbent applications due to their high CO2 absorption capacities at moderate working temperatures. By combining thermodynamic database mining with first-principles density functional theory and phonon lattice dynamics calculations, the National Energy Technology Laboratory has proposed and validated a theoretical screening methodology to identify the most promising CO2 sorbent candidates from a vast array of possible solid materials. The advantage of this method is that it identifies the thermodynamic properties of the CO2 capture reaction as a function of temperature and gas pressure without any experimental input beyond crystallographic structural information of the solid phases involved. The calculated thermodynamic properties of solid materials versus temperature and pressure changes were further used to evaluate the equilibrium properties for the CO2 adsorption/desorption cycles. The selected CO2 sorbent candidates were further considered for experimental validations. In this presentation, the results of M2O/Al2O3 (M=Li, Na, K) mixtures (MAlO2 and M5AlO4) capturing CO2 will be demonstrated in detail.

Duan, Yuhua↗
DOE OSTI2020

Crystallographic orientation-dependent strain hardening in a precipitation-strengthened Al-Cu alloy

While the strengthening of Al-Cu alloys due to precipitation has been extensively studied, the effect of crystallographic orientation of the matrix and precipitates, as well as precipitate morphology, on the strain hardening behavior is not well understood. In this paper, we investigate this effect with in situ neutron diffraction during deformation of an Al-Cu alloy (206) after multiple aging treatments. Precipitate-dislocation interactions were found to change from precipitate shearing for microstructures predominantly containing GPI and θ" precipitates to Orowan looping for microstructures with primarily θ' and θ precipitates. Notably, significant anisotropy in strain hardening behavior was observed when θ' precipitates were present, which was attributed to crystallographic orientation dependent load transfer from the Al matrix to the θ' precipitates. The anisotropic load transfer is hypothesized to be caused by the extent of rotation of high aspect-ratio θ' precipitates, owing to dislocations looping around them during plastic deformation of the matrix. Predictions from an analytical model describing the anisotropic magnitude of load transfer from precipitate rotation agree well with experimental results, successfully validating the precipitate rotation hypothesis and explaining the anisotropic strain hardening behavior. This model allows for the prediction of stresses separately in the precipitate and matrix phases as a function of crystallographic orientation, only given the bulk mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High performance high-power textured Mn/Cu-doped PIN-PMN-PT ceramics

Piezoelectric ceramics with combinatory soft and hard characteristics are highly desired for high-power applications. However, it remains grand challenge to achieve simultaneous presence of hard (e.g. high coercive field, E c ; high mechanical quality factor, Q m ) and soft (e.g. high piezoelectric constant, d; high electromechanical coupling factor, k) piezoelectric properties in piezoelectric ceramics since the mechanism controlling the hard behavior (pinned domain walls) will significantly reduce the soft behavior. Here, we address this grand challenge and demonstrate <001> textured MnO 2 and CuO co-doped Pb(In 1/2 Nb 1/2 )O 3- Pb(Mg 1/3 Nb 2/3 )O 3- PbTiO 3 (PIN-PMN-PT) ceramics exhibiting ultrahigh combined soft and hard piezoelectric properties (d 33 = 713 pC N –1 , k 31 = 0.52, Q m ≈950, E c = 9.6 kV cm –1 , tan δ = 0.45%). The outstanding electromechanical properties are explained by considering composition/phase selection, crystallographic anisotropy and defect engineering. Phase-field model in conjunction with high resolution electron microscopy and diffraction techniques is utilized to delineate the contributions arising from intrinsic piezoelectric response, domain dynamics, and local structural heterogeneity. Furthermore, these results will have significant impact in the development of high-power transducers and actuators.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Steric augmentation of three-coordinate Cu( I ) β-diketiminate isocyanide chromophores to achieve microsecond excited-state lifetime

Copper(I) complexes are promising alternatives to noble metal-based photosensitizers. A recently developed class of three-coordinate copper(I) charge-transfer chromophores, pairing β-diketiminate ligands with aryl isocyanides, exhibits excited-state lifetimes that are responsive to the steric profile of the isocyanide, reaching a value of nearly 300 nanoseconds when a substituted m-terphenyl isocyanide was used. In this work, we show that extreme steric augmentation of the β-diketiminate and m-terphenyl isocyanide ligands can lead to further improvements in excited-state lifetime, with one example surpassing 1 µs. This study includes a series of eight compounds of the general formula Cu(RNacNac)(CN-Ar X2 ), where RNacNac is the substituted β-diketiminate and CN-Ar X2 is the substituted m-terphenyl isocyanide. All eight compounds are crystallographically characterized, and their excited-state properties are thoroughly evaluated by a combination of steady-state and time-resolved photoluminescence studies. This combined structural/photophysical approach unveils a correlation between common steric parameters, derived from buried volume (%V bur ) and solid angle analysis, and the excited-state lifetime. Our investigation reveals that the steric profile of the β-diketiminate has a much larger impact on the steric profile and lifetime, whereas the m-terphenyl isocyanide substituents have an unsystematic and subtle influence on these two correlated parameters. Nevertheless, judicious pairing of the two ligands is critical for achieving long excited-state lifetimes.

Kumar, Ashish [University of Houston, TX (United S↗
DOE OSTI2025

Ferromagnetic moment in the magnetoelectric antiferromagnet Co 4 ⁢Ta 2 ⁢O 9 : Evidence of the 𝑃⁢1 magnetic space group

Exploring ferromagnetic moments in magnetoelectric materials is of both fundamental and technological importance. It enables the control of the correlated state using an uncompensated moment. However, its material realization is challenging owing to its exclusive microscopic mechanisms. Here, we report a nearly isotropic ferromagnetic moment in the magnetoelectric antiferromagnet Co 4 ⁢Ta 2 ⁢O 9 , by performing dc and ac magnetic susceptibility, magnetization, and neutron diffraction measurements on identical single crystals. Combined with the group theory analysis, we demonstrate a 𝑃⁢1 magnetic space group. This implies that physical activities can occur along any crystallographic direction, which explains the unusual magnetoelectric property of Co 4⁢ Ta 2⁢ O 9 . The ground state is classified as the M-type altermagnet based on the magnetic point group. Our study provides essential information to resolve the debate on the magnetic ground state and understand the magnetoelectric properties of the related compound with the prospect of observing and examining the 𝑃⁢1 magnetic space group or ferromagnet in ferroelectrics.

Antiferromagnets↗
NASA NTRS1972

A fundamental review of the friction and wear behavior of ceramics

The basic concepts associated with the friction and wear of materials are discussed as they relate to ceramics. Properties of ceramics such as crystal structure, crystallographic orientation, mechanical deformation, and surface chemistry are reviewed as they influence friction and wear. Both adhesive and abrasive wear of ceramics are discussed. The friction and wear of ceramics are examined in contact with themselves and when in contact with metals. The influences of environmental constituents such as water and hydrocarbons on friction and wear are reviewed. Materials discussed, by way of example, include aluminum oxide, rutile, calcium fluoride, and lithium fluoride.

Buckley, D. H.↗
NASA NTRS1972

A fundamental review of the friction and wear behavior of ceramics.

The basic concepts associated with the friction and wear of materials are discussed as they relate to ceramics. Properties of ceramics such as crystal structure, crystallographic orientation, mechanical deformation and surface chemistry are reviewed as they influence friction and wear. Both adhesive and abrasive wear of ceramics are discussed. The friction and wear of ceramics are examined in contact with themselves and when in contact with metals. The influences of environmental constituents such as water and hydrocarbons on friction and wear are reviewed. Materials discussed, by way of example, include aluminum oxide, rutile, calcium fluoride, and lithium fluoride.

Buckley, D. H.↗
NASA NTRS1980

Defect structure of EFG silicon ribbon

The defect structure of EFG ribbons was studied using EBIC, TEM and HVEM. By imaging the same areas in EBIC and HVEM, a direct correlation between the crystallographic nature of defects and their electrical properties was obtained. (1) Partial dislocations at coherent twin boundaries may or may not be electrically active. Since no microprecipitates were observed at these dislocations it is likely that the different electrical activity is a consequence of the different dislocation core structures. (2) 2nd order twin joins were observed which followed the same direction as the coherent first order twins normally associated with EFG ribbons. These 2nd order twin joins are in all cases strongly electrically active. EFG ribbons contain high concentrations of carbon. Since no evidence of precipitation was found with TEM it is suggested that the carbon may be incorporated into the higher order twin boundaries now known to exist in EFG ribbons.

Strunk, H.↗
NASA NTRS1995

Oxide perovskite crystals for HTSC film substrates microwave applications

The research focused upon generating new substrate materials for the deposition of superconducting yttrium barium cuprate (YBCO) has yielded several new hosts in complex perovskites, modified perovskites, and other structure families. New substrate candidates such as Sr(Al(1/2)Ta(1/2))O3 and Sr(Al(1/2)Nb(1/2))O3, Ba(Mg(1/3)Ta(2/3))O3 in complex oxide perovskite structure family and their solid solutions with ternary perovskite LaAlO3 and NdGaO3 are reported. Conventional ceramic processing techniques were used to fabricate dense ceramic samples. A laser heated molten zone growth system was utilized for the test-growth of these candidate materials in single crystal fiber form to determine crystallographic structure, melting point, thermal, and dielectric properties as well as to make positive identification of twin free systems. Some of those candidate materials present an excellent combination of properties suitable for microwave HTSC substrate applications.

Bhalla, A. S.↗
DOE OSTI2023

Automated, high-accuracy classification of textured microstructures using a convolutional neural network

Crystallographic texture is an important descriptor of material properties but requires time-intensive electron backscatter diffraction (EBSD) for identifying grain orientations. While some metrics such as grain size or grain aspect ratio can distinguish textured microstructures from untextured microstructures after significant grain growth, such morphological differences are not always visually observable. This paper explores the use of deep learning to classify experimentally measured textured microstructures without knowledge of crystallographic orientation. A deep convolutional neural network is used to extract high-order morphological features from binary images to distinguish textured microstructures from untextured microstructures. The convolutional neural network results are compared with a statistical Kolmogorov–Smirnov tests with traditional morphological metrics for describing microstructures. Results show that the convolutional neural network achieves a significantly improved classification accuracy, particularly at early stages of grain growth, highlighting the capability of deep learning to identify the subtle morphological patterns resulting from texture. The results demonstrate the potential of a convolutional neural network as a tool for reliable and automated microstructure classification with minimal preprocessing.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Machine learning approaches for crystallographic classification from synthetic 2D X-ray diffraction data

Crystallographic structure identification is crucial for understanding material properties; however, current methodologies often depend on labor-intensive and time-consuming analyses of 2D X-ray diffraction (XRD) patterns. To address these limitations, this study employs synthetic 2D XRD patterns combined with deep learning (DL) techniques to enable automated and high-throughput classification of the seven crystal systems and 230 space groups. We introduce the novel Auto Diffraction Pipeline, designed to generate synthetic 2D XRD spot patterns from crystallographic information files under diverse conditions, including varying zone axes, atomic substitution, atomic depletion and mechanical loading. These conditions enhance the realism of synthetic data, mitigating the scarcity of experimental datasets and enabling the creation of large representative training sets. Convolutional neural networks were trained and validated on these synthetic datasets to classify crystallographic structures across multiple scenarios. Our results demonstrate that integrating synthetic 2D XRD patterns with DL facilitates rapid, accurate and automated crystallographic classification, promoting the wider adoption of data-driven approaches in materials science.

Shahnazari, Ayoub [Univ. of Rochester, NY (United ↗