SEARCH · Search NASA

Results for “DISCONTINUITY SURFACES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

NASA NTRS2006

Method For Identifying Sedimentary Bodies From Images And Its Application To Mineral Exploration

A method is disclosed for identifying a sediment accumulation from an image of a part of the earth's surface. The method includes identifying a topographic discontinuity from the image. A river which crosses the discontinuity is identified from the image. From the image, paleocourses of the river are identified which diverge from a point where the river crosses the discontinuity. The paleocourses are disposed on a topographically low side of the discontinuity. A smooth surface which emanates from the point is identified. The smooth surface is also disposed on the topographically low side of the point.

Wilkinson, Murray Justin↗

NASA NTRS1985

Alignment of velocity and field changes across tangential discontinuities in the solar wind

Three-dimensional IMP 8 and Voyager 2 plasma and field data are used to investigate the relative changes in direction of the velocity and magnetic field vectors across tangential discontinuities in the solar wind. It is found that Delta-v and Delta-B/rho exp 1/2 are closely aligned either parallel or antiparallel to each other in the sense associated with the propagation of Alfven waves or rotational discontinuities outward from the sun. This alignment is observed at all solar distances betwen 1 and 2.2 AU and is independent of the solar wind stream structure. Several possible causes of the effect are briefly discussed, including interplanetary turbulence, the propagation of large-amplitude Alfvenic fluctuations traveling independently through the solar wind on both sides of the discontinuities, and the propagation of surface waves on tangential discontinuities.

Neugebauer, M.↗

NASA NTRS1986

Statistical characterization of sea surface geometry for a wave slope field discontinuous in the mean square

Statistics of two-dimensional wave groups, of steep wave events, and of a cascade pattern manifested in the surface geometry in a developed sea state are derived. A systematic view is presented of the spectral moment problem, highlighting its physical meaning and showing its relationship with the theory of random fields. A solution of this problem is suggested that is appropriate to the case of wind-generated surface waves. The solution method treats the surface elevation field as specified on a spatial (temporal) running grid, developing an averaging procedure which employs the Taylor microscale as the mesh size. The technique is illustrated by first exposing errors in direct calculations of the effective surface impedance for a coherently reflected L-band radio wave. The technique is then used to study wave groups and steep waves for a Gaussian, two-dimensional, time-varying surface. Finally, the theory is applied to estimate breaking wave statistics,

Glazman, R. E.↗

NASA NTRS1982

Acoustic propagation in a rigid torus

The acoustic propagation in a rigid torus is analyzed using a Green's function method. Three types of surface elements are developed; a flat quadrilateral element used in modeling polygonal cavities, a curved conical element appropriate for surfaces with one curvature, and a toroidal element developed for such doubly curved surfaces as the torus. Curved elements are necessary since the acoustic pressure is sensitive to slope discontinuities between consecutive surface elements especially near cavity resonances. The acoustic characteristics of the torus are compared to those of a bend of square cross section for a frequency range that includes the transverse acoustic resonance. Two equivalences between the different sections are tested; the first conserves curvature and cross-sectional dimension while the second matches transverse resonance and duct volume. The second equivalence accurately matches the acoustic characteristics of the torus up to the cutoff frequency corresponding to a mode with two circumferential waves.

El-Raheb, M.↗

NASA NTRS1996

Spray Combustion Modeling with VOF and Finite-Rate Chemistry

A spray atomization and combustion model is developed based on the volume-of-fluid (VOF) transport equation with finite-rate chemistry model. The gas-liquid interface mass, momentum and energy conservation laws are modeled by continuum surface force mechanisms. A new solution method is developed such that the present VOF model can be applied for all-speed range flows. The objectives of the present study are: (1) to develop and verify the fractional volume-of-fluid (VOF) cell partitioning approach into a predictor-corrector algorithm to deal with multiphase (gas-liquid) free surface flow problems; (2) to implement the developed unified algorithm in a general purpose computational fluid dynamics (CFD) code, Finite Difference Navier-Stokes (FDNS), with droplet dynamics and finite-rate chemistry models; and (3) to demonstrate the effectiveness of the present approach by simulating benchmark problems of jet breakup/spray atomization and combustion. Modeling multiphase fluid flows poses a significant challenge because a required boundary must be applied to a transient, irregular surface that is discontinuous, and the flow regimes considered can range from incompressible to highspeed compressible flows. The flow-process modeling is further complicated by surface tension, interfacial heat and mass transfer, spray formation and turbulence, and their interactions. The major contribution of the present method is to combine the novel feature of the Volume of Fluid (VOF) method and the Eulerian/Lagrangian method into a unified algorithm for efficient noniterative, time-accurate calculations of multiphase free surface flows valid at all speeds. The proposed method reformulated the VOF equation to strongly couple two distinct phases (liquid and gas), and tracks droplets on a Lagrangian frame when spray model is required, using a unified predictor-corrector technique to account for the non-linear linkages through the convective contributions of VOF. The discontinuities within the sharp interface will be modeled as a volume force to avoid stiffness. Formations of droplets, tracking of droplet dynamics and modeling of the droplet breakup/evaporation, are handled through the same unified predictor-corrector procedure. Thus the new algorithm is non-iterative and is flexible for general geometries with arbitrarily complex topology in free surfaces. The FDNS finite-difference Navier-Stokes code is employed as the baseline of the current development. Benchmark test cases of shear coaxial LOX/H2 liquid jet with atomization/combustion and impinging jet test cases are investigated in the present work. Preliminary data comparisons show good qualitative agreement between data and the present analysis. It is indicative from these results that the present method has great potential to become a general engineering design analysis and diagnostics tool for problems involving spray combustion.

Chen, Yen-Sen↗

NASA NTRS1972

Dissipation mechanisms in a pair of solar-wind discontinuities.

A pair of sharp closely spaced discontinuities in the solar wind was recorded by the high time resolution instruments aboard Ogo 5 on Mar. 14, 1968. There is plasma turbulence within the double structure, and there appear to be small-amplitude hydromagnetic waves radiating from the discontinuities. The generation of the plasma turbulence is discussed in terms of magnetic drift waves. Although it seems probable that the surfaces are tangential discontinuities, arguments are also advanced that the double structure may represent the Petschek mechanism in which rapid field-line merging occurs between standing waves.

Unti, T. W. J.↗

NASA NTRS1975

A finite element analysis of the exact nonlinear formulation of a lifting surface in steady incompressible flow, with the evaluation of the correct wake geometry

The problem of steady incompressible flow for lifting surfaces is considered. An integral equation is solved relating the values of the potential discontinuity on the lifting surface and its wake to the values of the normal derivative of the potential which are known from the boundary conditions. The lifting surface and the wake are divided into small quadrilateral surface elements. The values of the potential discontinuity and the normal derivative of the potential are assumed to be constant within each lifting surface element and equal to their values at the centroids of the lifting surface elements. This yields a set of linear algebraic equations. An iteration procedure is used to obtain the wake geometry: the velocities at the corner points of the wake elements are calculated and the wake streamlines are aligned to be parallel to the velocity vector. The procedure is repeated until convergence is attained.

Suciu, E. O.↗

NASA NTRS1986

On the behavior of hydromagnetic surface waves

The behavior of velocity, magnetic field, and pressure perturbations about a continuously varying interface in pressure equilibrium is investigated in detail within ideal incompressible magnetohydrodynamics. A specific initial value problem is solved in quadrature for a thin interface and compared with the solution for a discontinuous interface. The unattenuated surface wave about a discontinuous interface is replaced at a thin interface by a collective surface disturbance which decays, with the associated energy density flowing into local oscillations within the interface. At long times the envelope of the local oscillations is concentrated within a small fraction of the thin interface (gradients within the envelope increase linearly with time, eventually resulting in a breakdown of the linearized ideal theory). Thus, the derived decay rate of the surface disturbance gives a mode-conversion rate rather than a heating rate. In applications to the propagation and dissipation of surface waves in the solar corona, this rate cannot in general be interpreted as a coronal heating rate.

Lee, M. A.↗

NASA NTRS1973

On the surface-to-bulk mode conversion of Rayleigh waves.

Surface-to-bulk wave conversion phenomena occurring at a discontinuity characterized by a surface contour deformation are shown to be usable as a means for tapping Rayleigh waves in a nonpiezoelectric solid. A boundary perturbation technique is used in the treatment of the mode conversion problem. A systematic procedure is presented for calculating not only the first-order scattered waves, which include the reflected surface wave and the converted bulk wave, but also the higher order terms.

Chang, C.-P.↗

NASA NTRS1985

A New Technique for System-to-system Transfer of Surface Data

The purpose is to describe a recently developed technique aimed at providing a universal interface between surface types. In brief, a software package was developed which functions a common denominator of CAD/CAM surface types. This software enable one to convert from any given surface representation to any other target representation. The tiles maintain the same slope continuity as the target surface gram, bicubic patches are used since they allow one to match point, slope, and twist vectors to the target surface. Thus, slopes can be continuous or discontinuous as they are on the target surface. The patches can be of lower order if desired. For example, if only point information is available, the patches produced will be bilinear; however, the number of patches required is likely to increase correspondingly. The patches can be of higher order although many systems will not accept patches of more than order four. The final result of the program is a rectangular grid of bicubic patches. The patches fit the target surface exactly at their corners. Also, the patch corners have the same tangent and twist vectors. Adjacent patches will have slope continuity, unless a discontinuity was indicated by the target surface.

Sterling, M. W.↗

NASA NTRS1972

Scanning electron microscopy, non-dispersive X-ray analysis and electron microprobe studies of lunar soil, rocks and microbreccia

Silicate glass of composition similar to brown lunar glass was reduced with carbon and hydrogen. The typical complex iron sulfide and metallic iron mound formed by reduction with carbon is zoned. Its interior is metallic iron or a mixture of iron sulfide and metallic iron. The outer layer is pure metallic iron which is generally discontinuous, but the surface of the mound next to the silicate host is iron sulfide. This type of mound commonly has a waist of metallic iron and a void beneath it. The silicate surface of the void is covered with droplets or stringers of iron sulfide. The complex iron sulfide and metallic iron mounds formed by reduction with hydrogen generally are zoned. The outer layer is iron sulfide or a mixture of iron sulfide and metallic iron but the interior is metallic iron and iron sulfide, and the mound material next to the silicate host is iron sulfide. On the surface of some complex mounds, globules of silicate material are present. In one example, the globules consist of particles of aluminum oxide surrounded by silicate material. In turn, the margin of the globules is surrounded by iron sulfide. Dimples are present and surface of the dimples is covered by dendritic sheaths of iron sulfide and isolated metallic iron globules.

Carter, J. L.↗

NASA NTRS1991

Sensor fusion III: 3-D perception and recognition; Proceedings of the Meeting, Boston, MA, Nov. 5-8, 1990

The volume on data fusion from multiple sources discusses fusing multiple views, temporal analysis and 3D motion interpretation, sensor fusion and eye-to-hand coordination, and integration in human shape perception. Attention is given to surface reconstruction, statistical methods in sensor fusion, fusing sensor data with environmental knowledge, computational models for sensor fusion, and evaluation and selection of sensor fusion techniques. Topics addressed include the structure of a scene from two and three projections, optical flow techniques for moving target detection, tactical sensor-based exploration in a robotic environment, and the fusion of human and machine skills for remote robotic operations. Also discussed are K-nearest-neighbor concepts for sensor fusion, surface reconstruction with discontinuities, a sensor-knowledge-command fusion paradigm for man-machine systems, coordinating sensing and local navigation, and terrain map matching using multisensing techniques for applications to autonomous vehicle navigation.

Schenker, Paul S.↗

NASA NTRS1989

On the possibility of singularities in the acoustic field of supersonic sources when BEM is applied to a wave equation

Using a time domain method based on the Ffowcs Williams-Hawkings equation, a reliable explanation is provided for the origin of singularities observed in the numerical prediction of supersonic propeller noise. In the last few years Tam and, more recently, Amiet have analyzed the phenomenon from different points of view. The method proposed here offers a clear interpretation of the singularities based on a new description of sources, relating to the behavior of lines where the propeller blade surface exhibit slope discontinuity.

De Bernardis, E.↗

NASA NTRS1993

Anomalous resistivity and the evolution of magnetic field topology

This paper explores the topological restructuring of a force-free magnetic field caused by the hypothetical sudden onset of a localized region of strong anomalous resistivity. It is shown that the topological complexity increases, with the primitive planar force-free field with straight field lines developing field lines that wrap half a turn around each other, evidently providing a surface of tangential discontinuity in the wraparound region. It is suggested that the topological restructuring contributes to the complexity of the geomagnetic substorm, the aurora, and perhaps some of the flare activity on the sun, or other star, and the Galactic halo.

Parker, E. N.↗

NASA NTRS1994

Devices Relaminarize Turbulent Flows On Swept Wings

Drag reduced economically. Devices are small discontinuities built into surfaces of wings. Range from angled to straight, saw-toothed to square, and with and without concave steps. Saw-toothed configuration built into wings of future airplanes. Square devices machined separately and retrofitted to existing supersonic airplanes. Designed to reduce total airplane drag by changing high-drag turbulent wing-leading-edge flow to low-drag laminar wing-leading-edge flow. Used primarily on high-speed airplanes, but also useful in reducing drag in other applications.

Creel, Theodore R.↗

NASA NTRS1950

Hydrodynamic Properties of Planing Surfaces and Flying Boats

The study of the hydrodynamic properties of planing bottom of flying boats and seaplane floats is at the present time based exclusively on the curves of towing tests conducted in tanks. In order to provide a rational basis for the test procedure in tanks and practical design data, a theoretical study must be made of the flow at the step and relations derived that show not only qualitatively but quantitatively the inter-relations of the various factors involved. The general solution of the problem of the development of hydrodynamic forces during the motion of the seaplane float or flying boat is very difficult for it is necessary to give a three-dimensional solution, which does not always permit reducing the analysis to the form of workable computation formulas. On the other had, the problem is complicated by the fact that the object of the analysis is concerned with two fluid mediums, namely, air and water, which have a surface of density discontinuity between them. The theoretical and experimental investigations on the hydrodynamics of a ship cannot be completely carried over to the design of floats and flying-boat hulls, because of the difference in the shape of the contour lines of the bodies, and, because of the entirely different flow conditions from the hydrodynamic viewpoint.

Sokolov, N. A.↗

NASA NTRS2010

Prolegomena to the Study of Friction Stir Welding

The literature contains many approaches toward modeling of the friction stir welding (FSW) process with varying treatments of the weld metal properties. It is worthwhile to consider certain fundamental features of the process before attempting to interpret FSW phenomena: Because of the unique character of metal deformation (as opposed to, say, viscous deformation) a velocity "discontinuity" or shear surface occurs in FSW and determines much of the character of the welding mechanism. A shear surface may not always produce a sound bond. Balancing mechanical power input against conduction and convection heat losses yields a relation, a "temperature index", between spindle speed and travel speed to maintain constant weld temperature. But many process features are only weakly dependent upon temperature. Thus, unlike modeling of metal forming processes, it may be that modeling the FSW process independently of the material conditions has some merit.

Nunes, Arthur C., Jr.↗

NASA NTRS2013

On the Theory and Numerical Simulation of Cohesive Crack Propagation with Application to Fiber-Reinforced Composites

The phenomenon of crack propagation is among the predominant modes of failure in many natural and engineering structures, often leading to severe loss of structural integrity and catastrophic failure. Thus, the ability to understand and a priori simulate the evolution of this failure mode has been one of the cornerstones of applied mechanics and structural engineering and is broadly referred to as "fracture mechanics." The work reported herein focuses on extending this understanding, in the context of through-thickness crack propagation in cohesive materials, through the development of a continuum-level multiscale numerical framework, which represents cracks as displacement discontinuities across a surface of zero measure. This report presents the relevant theory, mathematical framework, numerical modeling, and experimental investigations of through-thickness crack propagation in fiber-reinforced composites using the Variational Multiscale Cohesive Method (VMCM) developed by the authors.

Rudraraju, Siva Shankar↗