SEARCH · Search NASA

Results for “DYNAMIC MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

All sources NASA NTRS DOE OSTI

DOE OSTI2026

Reformulating a Gurson-based dynamic damage model and demonstrating improved predictive power and numerical robustness

The original Tepla (TEnsile PLAsticity) ductile damage model, based on the Gurson yield surface, has long been used to model damage evolution and material failure under dynamic loading. Unfortunately, Tepla suffered from mesh sensitivity, numerical instability, and limited predictive capability. Here, we theoretically reformulate Tepla to address these issues. We especially focus on the prediction of porosity, which is the key state variable used for modeling ductile damage, as compared to more easily measured surface velocities, which are at best an indirect measure of damage. Key model changes include separating the viscosity during volumetric void growth from underlying shear strength behavior and switching to an iterative bisection solver. The new Tepla is then calibrated on incipient spall experiments on half-hard copper and tantalum, which demonstrate its ability to simultaneously fit the model to recovered porosity distributions and measured surface velocities, a stringent test. Improved numerical behavior, such as greatly reduced mesh sensitivity, is also shown in those simulations. Finally, the new Tepla model is applied to several high-explosive loaded, sweeping wave experiments, showing the ability of the model to predict behavior on tests with significantly different loading conditions and histories than the calibration data.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Power modeling of degraded PV systems: Case studies using a dynamically updated physical model (PV-Pro)

Power modeling, widely applied for health monitoring and power prediction, is crucial for the efficiency and reliability of Photovoltaic (PV) systems. The most common approach for power modeling uses a physical equivalent circuit model, with the core challenge being the estimation of model parameters. Traditional parameter estimation either relies on datasheet information, which does not reflect the system's current health status, especially for degraded PV systems, or requires additional I-V characterization, which is generally unavailable for large-scale PV systems. Thus, we build upon our previously developed tool, PV-Pro (originally proposed for degradation analysis), to enhance its application for power modeling of degraded PV systems. PV-Pro extracts model parameters from production data without requiring I-V characterization. This dynamic model, periodically updated, can closely capture the actual degradation status, enabling precise power modeling. PV-Pro is compared with popular power modeling techniques, including persistence, nominal physical, and various machine learning models. The results indicate that PV-Pro achieves outstanding power modeling performance, with an average nMAE of 1.4 % across four field-degraded PV systems, reducing error by 17.6 % compared to the best alternative technique. Furthermore, PV-Pro demonstrates robustness across different seasons and severities of degradation. The tool is available as a Python package at https://github.com/DuraMAT/pvpro.

14 SOLAR ENERGY↗

DOE OSTI2025

Development of an ERT‐Based Framework for Bentonite Buffers Monitoring From Laboratory Tests: 2. Quantitative Moisture Dynamics Estimation Model

Abstract The long‐term containment of high‐level radioactive waste in geological disposal repositories relies on Engineered Barrier Systems (EBS), with bentonite clay emerging as a candidate material due to its unique properties. Understanding moisture dynamics within bentonite buffers is crucial for EBS performance, as it directly influences the material's swelling capacity, thermal and hydraulic conductivity, mechanical properties, and long‐term evolution under complex thermal‐hydrological‐mechanical (THM) processes. This study develops an advanced Electrical Resistivity Tomography (ERT)‐based framework to quantitatively monitor moisture dynamics under THM conditions. Our framework extends the Waxman‐Smits model to incorporate the coupled effects of temperature, water content, fluid chemistry, and mechanical changes on bentonite's electrical properties. Utilizing HotBENT‐Lab data from our companion paper, which includes electrical conductivity, CT density, and thermocouple measurements, this study offers a novel methodological framework bridging different scales of the model. Our results show that the extended model can estimate water content from ERT data, capturing spatial and temporal variations in moisture distribution within bentonite columns. However, the model tends to overestimate water content compared to CT density‐derived measurements. We address this discrepancy by incorporating a simplified swelling effect model, which improves agreement between ERT and CT density‐based water content estimates. We also discuss model limitations, including simplified treatment of swelling and micropore effects, and propose a conceptual framework for transitioning from laboratory to field applications, addressing challenges such as parameter scalability, field validation methods, and integration of diverse data sources. This ERT‐based framework can potentially advance real‐world moisture monitoring of bentonite‐based EBS in nuclear waste repositories. Plain Language Summary Safely containing high‐level radioactive waste depends on barriers made from materials like bentonite clay, which is effective because it swells and seals in the waste. To ensure these barriers work well over time, it's important to understand how moisture moves through the clay. Our study developed a new method using ERT to monitor moisture levels in bentonite under conditions that mimic those in actual storage sites, including changes in temperature, water content, and mechanical stress. This study improved an existing model to better account for how these factors affect the clay, allowing us to create more accurate moisture maps. Initially, the proposed model overestimated the amount of water in the clay, but its accuracy was improved by factoring in how the clay swells when wet. This study also identified some limitations of the model and suggested ways to adapt it for use in real‐world waste storage sites. This new approach could lead to better monitoring and safety checks for nuclear waste storage systems, helping to ensure long‐term containment. Key Points This work develops an ERT‐based framework extending the Waxman‐Smits model to monitor bentonite moisture dynamics during coupled THM processes The extended model accurately estimates water content from Electrical Resistivity Tomography data, incorporating swelling effects to improve precision This work proposes a conceptual framework for transitioning from laboratory to field applications, advancing EBS monitoring in nuclear waste repositories

Chen, Hang↗

DOE OSTI2025

Dynamic response of a freely rotating butterfly valve in the advanced test reactor − dynamic coefficients modeling

Here, in evaluating the water hammer issue pertaining to the primary-coolant-regulating butterfly valve in the Advanced Test Reactor, the dynamic fluid body interaction (DFBI) approach was implemented in the analysis covered in Part I. Although DFBI modeling accurately and simultaneously solved the dynamic motion of the valve’s disk along with the flow field of the surrounding fluid, it shed little light on the reason behind such motion. For Part II, the reacting torque of the fluid on the disk was decomposed into representations of the dynamic coefficients in terms of stiffness, damping, and added mass. These were evaluated via simulations with steady-state static (stiffness), constant angular speed (damping), and variable angular speed (added mass) disks. Substituting the dynamic coefficients into Newton’s second law enabled the response trajectories to be obtained. Stable (by average) and unstable equilibrium positions and thrust tendencies of the valve were determined based on the stiffness coefficient (or static torque), the response amplitude was dampened or enlarged by the damping coefficient (minorly affected by added mass), and the response frequency was altered by the damping and added mass coefficients. Although the dynamic coefficient approach renders slightly different trajectories, due to the averaging effect of the torque in comparison to the DFBI method, the overall trend of the response aligns with the DFBI simulation, thus confirming the conclusion in Part I that a fix to the current butterfly valve is necessary.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Structured Neural Network Modeling for Developing Digital Twins Models of Hydropower Generation Units

Dynamic modeling is a key part in the development of digital twin (DT) for dynamic systems. This is true for hydropower systems, where whole system modeling including penstock, turbine and generators, etc is important in realizing actuate modeling for the real systems. On the other hand, in response to the large variations of the power demand due to increased penetration of renewables such as wind and solar, hydropower systems are now required to operate in a large power generation range. This situation triggers the nonlinear characteristics of the generation unit with respect to its models. As such, it is imperative to use data driven modeling such as neural networks to learn the nonlinear dynamics of the hydropower generation unit. To achieve this objective, this study constructs a modeling and learning algorithm integrated with multiple structured neural network models for the modeling of turbine shaft speed, penstock pressure, and generator power output based on the generator power control setpoint, field current, and field voltage. In addition, the study uses the hydropower data from Tacoma Public Utilities to train and validate the proposed neural network algorithm. The results have shown that this structured neural network modeling approach can learn the system dynamics effectively by using the real-time data collected from the hydropower system with the desired modeling results.

Wang, Hong↗

DOE OSTI2024

Evaluating crown scorch predictions from a computational fluid dynamics wildland fire simulator

Abstract Background Crown scorch—the heating of live leaves, needles, and buds in the vegetative canopy to lethal temperatures without widespread combustion—is one of the most common fire effects shaping post-fire canopies. Despite the ability of computational fluid dynamic models to finely resolve fire activity and buoyant plume dynamics including heterogenous 3D distributions of forest canopy heating, these models have had only limited use in simulating fire effects and have not been used to evaluate crown scorch. Here, we demonstrate a method of evaluating crown scorch using a computational fluid dynamics model, FIRETEC, and validate this approach by simulating the experiments that were used to develop Van Wagner’s 1973 crown scorch model. Results The average scorch height prediction from FIRETEC compares well with the empirical model derived by Van Wagner, which is the most widely used empirical model for crown scorch. We further find that the 3D buoyant plume dynamics from a steady and homogeneous idealized heat source on the ground results in a spatially heterogenous crown scorch pattern reflecting complex heating dynamics that are best represented by percent scorch rather than height of scorch. Conclusions The ability of the computational fluid dynamics model to capture variation in crown scorch due to 3D buoyant plume dynamics provides direct links between forest structure, fire behavior, and fire effects that can be used by forest managers and researchers to better understand how fires result in crown damage under various environmental and management scenarios.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Improved Representations of Land‐Atmosphere Interactions Over the Continental U.S. Through Dynamic Root Modeling

Previous studies have identified the oversimplified root system representation as a key factor leading to inaccuracies in vegetation‐atmosphere feedbacks. In this study, a dynamic root water uptake scheme in the Noah‐MP land surface model has been coupled to the Weather Research and Forecasting (WRF) model to investigate its impact on the surface hydroclimate variables and land‐atmosphere interactions. To evaluate the impact of the dynamic root, two coupled simulations were conducted, one with the dynamic root water uptake scheme (DynRt) and one with the static root water uptake scheme (StcRt), which is based on the default root representation in Noah‐MP, with slight modifications, primarily in vegetation‐related parameters. Both DynRt and StcRt simulations were conducted with a small ensemble of three members to account for variations in physical parameterizations, initial and boundary forcing and model setup. When compared with reference data sets, the DynRt simulations show improved results than the StcRt simulations, reducing biases in the simulated leaf area index, surface energy fluxes, soil moisture and precipitation. Two different mechanisms through which roots affect land‐atmosphere coupling have been identified. Over the transitional climate zone between the dry and wet climate, the dynamic root scheme affects surface climate and land‐atmosphere coupling mainly through changes in soil moisture through hydraulic redistribution by plant root system. Over the energy‐limited mesic zone, the dynamic root affects regional land‐atmosphere coupling mainly through changes in carbon allocation. This work highlights the importance of dynamic root representation in improving vegetation‐atmosphere simulations by enhancing predictions of water, energy, and carbon fluxes.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

A wide-range thermodynamically consistent constitutive model for dynamic loading of partially saturated porous media

SUMMARY This paper presents a novel thermodynamically consistent constitutive model for partially saturated porous rocks across a wide range of conditions. The material states generated behind the shock wave from an explosive source can vary significantly, ranging from crushed and melted rock near the source to a poroelastic medium in the far field. In the model, rock strength is determined by the effective pressure, which is calculated using two independent equations of state: one for the solid rock and another for the pore fluid. The model accounts for shock-induced liquefaction resulting from fluid pressure buildup in the pore spaces near the explosive source. Simultaneously, it describes the increase in wave propagation speed due to elastic pore contraction in both dry and partially saturated rocks. This model is applied to investigate how fluid saturation affects the amplitude and shape of the generated waves, as well as the residual stress surrounding the cavity formed by spherical explosions.

Vorobiev, Oleg [Lawrence Livermore National Labora↗

DOE OSTI2026

Machine-learning force-field models for dynamical simulations of metallic magnets

We review recent advances in machine-learning (ML) force-field methods for Landau–Lifshitz–Gilbert simulations of itinerant electron magnets, focusing on their scalability and transferability. Built on the principle of locality, a deep neural-network model is developed to efficiently and accurately predict electron-mediated forces governing spin dynamics. Symmetry-aware descriptors constructed through a group-theoretical approach ensure rigorous incorporation of both lattice and spin-rotation symmetries. The framework is demonstrated using the prototypical s-d exchange model widely employed in spintronics. ML-enabled large-scale simulations reveal novel nonequilibrium phenomena, including anomalous coarsening of tetrahedral spin order on the triangular lattice and the freezing of phase-separation dynamics in lightly hole-doped, strong-coupling square-lattice systems. These results establish ML force-field frameworks as scalable, accurate, and versatile tools for modeling nonequilibrium spin dynamics in itinerant magnets.

Artificial neural networks↗

DOE OSTI2026

Adaptive Stiffness Power Take-Off System for a Hydraulic Hose-Pump Point Absorber Wave Energy Converter

Two crucial challenges faced in the design of ocean wave energy converters (WECs) are maintaining high capacity factors and remaining robust in everchanging, harsh ocean environments. This study introduces a novel mechanism for achieving reactive WEC control with a soft hydraulic power take-off, thereby addressing both challenges. The device of interest involves a hydraulic pump, constructed from a fluidic flexible matrix composite (F2MC), which is cyclically stretched by driving waves and pressurizes working fluid through a turbine-generator. This class of fiber-reinforced stretch hoses is established for ocean use as robust moorings and shock absorbers. The dynamic properties of the F2MC pump depend on internal pressure, which can be controlled by a continuously variable transmission between the turbine and generator, allowing the system to be adapted for better performance over a wide range of wave conditions. This work presents a dynamic model for operation and adaptive behavior of this power take-off system, experimentally validates components of the model, and performs dynamic simulations of the system that show increases in power production and capacity factor compared to non-adaptive operation for a variety of driving wave conditions. This work develops the basis for future large-scale experimental testing and controller design of this system.

Wave energy conversion, fluidic flexible matrix co↗

DOE OSTI2024

Modeling and Optimization of a Nuclear Integrated Energy System for the Remote Microgrid on El Hierro

Nuclear microreactors are a potential technology to provide heat and electricity for remote microgrids. There is potential for the microgrid on the island of El Hierro to use a microreactor, within an integrated energy system (IES), to generate electricity and provide desalinated water. This work proposes a workflow for optimizing and analyzing IESs for microgrids. In this study, an IES incorporating a microreactor, thermal energy storage (TES) system, combined heat and power plant, and a thermal desalination plant was designed, optimized, and analyzed using Idaho National Laboratory’s Framework for Optimization of Resources and Economics (FORCE) toolset. The optimization tool, Holistic Energy Resource Optimization Network (HERON), was used to determine the optimal capacity sizes and dispatch for the reactor and thermal energy storage systems to meet demand. The optimized reactor and TES sizes were found to be 11.61 MWth and 58.47 MWhth, respectively, when optimizing the IES to replace 95% of the island’s existing diesel generation needs. A dynamic model of the system was created in the Modelica language, using models from the HYBRID repository, to analyze and verify the dispatch from the optimizer. The dynamic model was able to meet the ramp rates while maintaining reactor power with minimal control adjustments.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2025

Assessing Dynamic Behaviors in Converter- Dominated Power Systems via RMS and EMT Simulations: A Study of Hawaii’s NELHA Microgrid

The transition from conventional power systems to converter-based microgrids has significantly advanced sustainability, clean energy integration, and operational reliability. However, this paradigm shift introduces operational challenges due to the intermittent nature of renewable energy sources and the non-linear characteristics of power electronic loads, inducing voltage fluctuations and harmonic distortions that complicate voltage and frequency regulation. Accurate dynamic modeling is hypothesized to be critical for capturing such effects, enabling reliable simulation and control strategy development. This study introduces an innovative dynamic modeling framework for a real-world converter-based microgrid, utilizing both root mean square (RMS) and electromagnetic transient (EMT) simulation methods. The microgrid was modeled in DIgSILENT PowerFactory, with simulations calibrated against high-resolution field measurements from SEL-735 power quality meters. Results show that RMS simulations effectively characterize steady-state dynamics, while EMT simulations are essential for capturing high-frequency transients and non-linear effects from photovoltaic inverters and variable frequency drives (VFDs). This complementary approach provides a comprehensive understanding of microgrid behavior, providing critical insights for improving simulation accuracy, advancing protection schemes, and improving resilience in future low-inertia power networks.

24 POWER TRANSMISSION AND DISTRIBUTION↗

DOE OSTI2025

Data-driven modeling of dynamic occupant thermostat override behavior for demand response applications

Buildings consume nearly 40% of global energy and produce similar emissions. Whiletechnological advances address efficiency, occupant behavior causes energy use variations up to 300% between identical buildings. This gap between predicted and actual building performance impacts building design, operations, and grid demand management programs. Through analyses of smart thermostat data from 1,400 single-occupant homes, the researchdemonstrates that occupants respond to 8°F thermostat setpoint changes within a median of 15 minutes, while 2°F changes trigger responses within a median of 30 minutes. This highlights an understudied temporal relationship between thermostat setbacks and response time of occupant behaviors. Models of such behavior dynamics are required to incorporate occupant impacts into building performance simulation. A key contribution of this dissertation is the Thermal Frustration Theory (TFT), which positsthat thermal discomfort driven behaviors are caused by the time-accumulation of discomfort, not simply a temperature deviation threshold or a delay from an initiating event. Using a dataset of 634 thermostats, each with 25+ manual setpoint changes, a comparative analysis of TFT and comfort zone and a delayed response theories demonstrated that personalized TFT models better predict when manual setpoint change occur. This was measured by the area under the curve statistical measure (AUC); all three models perform similarly by a Matthews Correlation Coefficient measure. Higher AUC performance is especially important for modeling occupant behavior in demand response programs where false negatives of rare occupant interactions could adversely affect grid stability. EnergyPlus based simulations were conducted with TFT-derived occupant models, demonstrating the ability to identify parameters of known TFT models from only data observable with smart thermostats, even under the presence of noise from routine overrides. Overall, the dissertation highlights that thermostat interactions are neither static,instantaneous, nor driven solely by the environment. Instead, temporal accumulation of discomfort and routine-based behavior play important roles. The methodology and results offer a pathway towards more accurate modeling of human-building interactions for policy assessment, building design, and demand response programs.

Sharma, Kunind [Northeastern University] (ORCID:00↗

DOE OSTI2026

Semi-Analytical Hierarchical Bayesian Inference of Nonlinear Model Structure in Stochastic Dynamics: Applied to Compartmental Models of Infectious Diseases

A Bayesian computational framework for parsimonious inference in stochastic nonlinear dynamical systems is presented. This framework enables the concurrent estimation of system states, time-varying parameters, time-invariant parameters, and the optimal sparsity structure of the model parameters. Because differential equation-based models are often simplified mechanistic or phenomenological representations, robust inference from noisy measurement data requires explicit treatment of model error and uncertainty. Model error and time-varying parameters can be represented as random processes, enabling inference while making minimal assumptions about the underlying sources of discrepancy and variability. Adopting stochastic differential equation representations affords the model significant flexibility, but can also render it susceptible to overfitting during statistical inversion, where the inferred model may track noise rather than the underlying signal. To alleviate the effects of overfitting and to enable the discovery of the optimal sparse representation of the time-invariant parameters, a Bayesian sparse learning algorithm is embedded within the framework. This sparse learning framework adopts an approximate hierarchical Bayesian setting defined by a series of semi-analytical expressions. The model structure inference framework is validated using a stochastic compartmental model for tracking and forecasting active cases of an infectious disease. Compartmental models describe population-level infectious disease dynamics through interactions among population fractions grouped by disease state. Mathematically, such models consist of a system of coupled ordinary differential equations. This example adopts an expressive compartmental model that includes multiple possible interactions between disease states, motivated by early uncertainty surrounding COVID-19 reinfection dynamics and their implications for long-term epidemic forecasting. The sparse learning exercise permits the inference of a priori unknown epidemiological dynamics from simulated public health data, discovering the nested compartmental model that optimizes the trade-off between average data-fit and model complexity. It is shown that inducing sparsity among the model parameters eliminates redundant interactions between compartments, equivalently revealing the optimal coupling structure between differential equations.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Integrating Characteristic Arctic Vegetation in a Land Surface Model Improves Representation of Carbon Dynamics Across a Tundra Landscape: Modeling Archive

This modeling archive is in support of the Next-Generation Ecosystem Experiments in the Arctic (NGEE Arctic) publication "Integrating Characteristic Arctic Vegetation in a Land Surface Model Improves Representation of Carbon Dynamics Across a Tundra Landscape", by Murphy et al. (2025). This archive contains model input files and outputs from landscape-scale simulations conducted using ELM, the land model component of the Department of Energy’s Energy Exascale Earth System Model (E3SM), at the Council NGEE Arctic field site (Council Road mile marker 71) on Alaska’s Seward Peninsula. Input data and model output from two sets of ELM simulations are provided. The first set of simulations were conducted with the two default ELM Arctic plant functional types (PFTs; broadleaf deciduous boreal shrub and a C3 grass) and the second set of simulations were conducted with a set of nine Arctic-specific PFTs including nonvascular mosses and lichens, graminoids, forbs, evergreen dwarf shrubs, three height classes of deciduous shrubs (dwarf, low, and low to tall), and deciduous alder shrubs (Sulman et al., 2021). Parameter names and major parameter changes in the Arctic-specific PFT configuration are described in Sulman et al. (2021) and archived in the Sulman et al. (2021) dataset (see below). Simulations were spatially explicit, covering an approximately 6.4X3.3 km domain at the Council site with a spatial resolution of 100 m for a total of 2,112 simulated grid cells under each ELM PFT configuration. The modeling archive contains meteorological forcing (seven *.nc files and one *.txt file), a domain definition file (one *.nc files), land surface configuration files (two *.nc files), parameter files (two *.nc files), annual ELM output files spanning 1980-2014 (68 *.nc files), and a User’s Guide (*pdf file). Additional information on the provided files is in the “Modeling Archive Contents” section of the User’s Guide. Model outputs are aggregated to the column scale (i.e. PFT-specific outputs are not provided here).

Murphy, Bailey [ORNL] (ORCID:0000000203995221)↗

DOE OSTI2026

Enhanced accuracy through ensembling of randomly initialized auto-regressive models for dynamical systems

Computational mechanics simulations using traditional finite element methods (FEM) require prohibitively expensive computational resources for real-time engineering applications, design optimization, and digital twin implementations. While machine learning (ML) surrogate models offer significant computational speedups, autoregressive ML models for time-dependent mechanical systems suffer from error accumulation that compromises long-term prediction reliability - a critical concern for engineering applications where accuracy over extended time horizons is essential for safety and performance assessments. Here, we propose a deep ensemble framework specifically designed to address this challenge in computational mechanics applications, where multiple ML surrogate models with random weight initializations are trained in parallel and their predictions aggregated during inference. This approach leverages statistical diversity to maximize information gain from a fixed set of training data and to mitigate error propagation, while maintaining the computational efficiency that makes ML surrogates attractive for engineering practice. We validate the framework on three representative problems spanning critical areas of computational mechanics: stress field evolution in heterogeneous microstructures under complex loading (relevant to advanced materials design and composite analysis), planetary-scale shallow water dynamics (applicable to environmental and geotechnical engineering), and Gray-Scott reaction-diffusion systems (relevant to mass transport and chemical process engineering). Across all test cases, the ensemble approach demonstrates consistent error reduction of 15-33% compared to individual models. The codes for this work are available on GitHub (https://github.com/Graham-Brady-Research-Group/AutoregressiveEnsemble_SpatioTemporal_Evolution).

autoregressive prediction↗

DOE OSTI2024

Core Model Proposal #399: Updating the SSP Database (v3.0) (Population, GDP, and Labor Force) and Labor Productivity (KLEM)

This Core Model Proposal (CMP) updates the Shared Socioeconomic Pathway (SSP) database to a recent version (v3.0.1; released in 2024) within GCAM. Currently, GCAM relies on socioeconomic drivers, including population, GDP, and labor force projections, from the original SSP database version released in 2013. These projections, provided by independent socioeconomic dynamic models (e.g., multi-dimensional demographic models and macroeconomic models of convergence growth), may need regular updates when (1) near-term observations become available and (2) there are updates and advancements in the socioeconomic modeling. Timely updates of socioeconomic drivers in global economic equilibrium and multisector dynamic modeling will ensure (1) alignment of historical years and near-term projections with observations, enhancing base year calibrations, including calibration parameters and labor productivity, and (2) improvement of long-term projections with updated socioeconomic drivers, which set the scale of the economy. This CMP updates the SSP data (from v2013 to v2024) and also fixes/reconciles historical GDP data sources in GCAM. We investigate the impact of these updates on GCAM projections.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Extended dynamic mode decomposition for model reduction in fluid dynamics simulations

High computational cost and storage/memory requirements of fluid dynamics simulations constrain their usefulness as a predictive tool. Reduced-order models (ROMs) provide a viable solution to this challenge by extracting the key underlying dynamics of a complex system directly from data. We investigate the efficacy and robustness of an extended dynamic mode decomposition (xDMD) algorithm in constructing ROMs of three-dimensional cardiovascular computations. Focusing on the ROMs' accuracy in representation and interpolation, we relate these metrics to the truncation rank of singular value decomposition, which underpins xDMD and other approaches to ROM construction. Our key innovation is to relate the truncation rank to the singular values of the original flow problem. This result establishes a priori guidelines for the xDMD deployment and its likely success as a means of data compression and reconstruction of the system's dynamics from dominant spatiotemporal structures present in the data.

Mechanics↗