SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Thermal analysis data plots for heat loads of electronic packages, environmental control systems, and vehicle thermal systems
Outgassing apparatus and gas analysis data for modular nuclear vehicle
Viewgraphs on a Space Data Analysis and Visualization System (SAVS) are presented. Topics covered include: SAVS - a data acquisition, manipulation, analysis and a visualization system; the SAVS focus; the NASA vision for the coming decade; statement of the problem; needs of the practicing scientist; projecting capabilities; and SAVS near term activities.
For the Urban Air Mobility (UAM) industry, NASA has defined a series of UAM Maturity Levels (UML) corresponding to increasingly more complex and operationally dense UAM operations. In support of the gradual progression towards higher UML levels, NASA is currently conducting a set of UAM air traffic simulations—collectively referred to as X4. This paper describes a set of system effectiveness measures, and their associated metrics, for data analysis of X4 simulations. The descriptions, rationales, and calculation procedures for two metrics to be used in data analysis of simulation results, the number of predicted demand-capacity imbalances and the pre-departure delays, are described. Results from data analysis of one set of simulation runs are presented to demonstrate how these metrics support the assessment of performance of the system architecture for X4 simulations and the verification of experiment requirements.
For the Urban Air Mobility (UAM) industry, NASA has defined a series of UAM Maturity Levels (UML) corresponding to increasingly more complex and operationally dense UAM operations. In support of the gradual progression towards higher UML levels, NASA is currently conducting a set of UAM air traffic simulations—collectively referred to as X4. This paper describes a set of system effectiveness measures, and their associated metrics, for data analysis of X4 simulations. The descriptions, rationales, and calculation procedures for two metrics to be used in data analysis of simulation results, the number of predicted demand-capacity imbalances and the pre-departure delays, are described. Results from data analysis of one set of simulation runs are presented to demonstrate how these metrics support the assessment of performance of the system architecture for X4 simulations and the verification of experiment requirements.
NASA Goddard Earth Sciences Data and Information Services Center (GES DISC) archives and distributes rich collections of data on atmospheric greenhouse gases from multiple satellite missions and model results. Among those greenhouse gases, atmospheric methane is a powerful greenhouse gas contributing ~0.5 (W/m^2) to total radiative forcing, and its concentration has increased by about 150% since 1750. Observations or estimates of methane emissions typically have sparse spatial and temporal coverage. The lack of comprehensive spatial and temporal coverage of methane source and sink observations has made analyzing atmospheric methane trends challenging. In this study the GES DISC aims to provide the community with the resources to better understand changes in atmospheric methane concentrations and the underlying causes. We will utilize methane datasets from Atmospheric Infrared Sounder (AIRS) retrieved methane concentration and three Carbon Monitoring System (CMS) methane emission datasets (in regions of North America, Canada, and Mexico) to compare AIRS methane growth with corresponding CMS regional methane emissions. Comparisons of AIRS methane growth rates and CMS methane emissions suggests wetland emissions may impact methane growth rate trends over North America. As the record for CMS methane data is extended, both datasets can be used in conjunction to better understand impacts on atmospheric methane trends. GES DISCs new anomaly tool can also be used on select datasets to further quantify trends in atmospheric greenhouse gases.
Lunar orbiter photographic data analysis for Apollo landing hazard appraisal
The National Solar Observatory's SOLIS Vector Spectromagnetograph (VSM), which will produce three or more full-disk maps of the Sun's photospheric vector magnetic field every day for at least one solar magnetic cycle, is in the final stages of assembly. Initial observations, including cross-calibration with the current NASA/NSO spectromagnetograph (SPM) will soon be carried out at a test site in Tucson. This paper discusses data analysis techniques for reducing the raw data, calculation of line-of-sight magnetograms and both quick-look and high-precision inference of vector fields from Stokes spectral profiles. Existing SPM algorithms, suitably modified to accomodate the cameras, scanning pattern, and polarization calibration optics for the VSM, will be used to "clean" the raw data and to process line-of-sight, magnetograms. A recent. version of the High Altitude Observatory Milne-Eddington (HAO-ME) inversion code (Skumanich and Lites; 1987, 11)J 322, p. 473) will he used for high-precision vector fields since the algorithm has been extensively tested, is well understood, and is fast enough to complete data analysis within 24 hours of data acquisition. The simplified inversion algorithm of Auer, Heasley. arid House (1977, Sol. Phys. 55, p. 47) forms the initial guess for this version of the HAO-ME code and will be used for quick-look vector analysis of VSM data since its performance on simulated Stokes profiles is better than other candidate methods. Improvements (e.g., principal components analysis or neural networks) are under consideration and will be straightforward to implement. However, current resources are sufficient to store the original Stokes profiles only long enough for high-precision analysis. Retrospective reduction of Stokes data with improved methods will not be possible, and modifications will only be introduced when the advantages of doing so are compelling enough to justify discontinuity in the long-term data stream.
The photometric data taken during the 1969 CV990 expedition were analyzed. It was found that the so-called soft auroral zone extends right through the night side auroral zone. The soft precipitation is a permanent feature of the night side auroral zone and probably signifies the position of the plasma sheet. The harder auroras which include the conventional visible auroras occur less frequently. The intensity and mean energy of auroral electrons is correlated suggesting that the fluctuation in auroral intensity comes primarily from the variability of the acceleration mechanism rather than the variations in the particle population densities. During the 1969 CV990 expedition, coordinated data was taken with the particle experiments on OV1-18 and ATS-5 satellites. The satellite data was reduced to facilitate coordinated investigations with the airborne experimenters. The airborne photometric lambda 5200 NI data were analyzed and the effective life time was found to be 4.5 minutes.
A description is given of the Interactive Astronomical Data Analysis Facility (IADAF) which performs interactive analysis of astronomical data for resident and visiting scientists. The facilities include a Grant measuring engine, a PDS 1010A microdensitometer, a COMTAL image display system and a PDP 11/40 computer system. Both hardware and software systems are examined, including a description of thirteen overlay programs. Some uses of the IADAF are indicated.
The NASA Lewis Research Center's Principal Investigator Microgravity Services project analyzes Orbital Acceleration Research Experiment and Space Acceleration Measurement System data for principal investigators of microgravity experiments. Principal investigators need a thorough understanding of data analysis techniques so that they can request appropriate analyses to best interpret accelerometer data. Accelerometer data sampling and filtering is introduced along with the related topics of resolution and aliasing. Specific information about the Orbital Acceleration Research Experiment and Space Acceleration Measurement System data sampling and filtering is given. Time domain data analysis techniques are discussed and example environment interpretations are made using plots of acceleration versus time, interval average acceleration versus time, interval root-mean-square acceleration versus time, trimmean acceleration versus time, quasi-steady three dimensional histograms, and prediction of quasi-steady levels at different locations. An introduction to Fourier transform theory and windowing is provided along with specific analysis techniques and data interpretations. The frequency domain analyses discussed are power spectral density versus frequency, cumulative root-mean-square acceleration versus frequency, root-mean-square acceleration versus frequency, one-third octave band root-mean-square acceleration versus frequency, and power spectral density versus frequency versus time (spectrogram). Instructions for accessing NASA Lewis Research Center accelerometer data and related information using the internet are provided.
I will provide an overview of advances in VLBI data analysis implemented at NASA GSFC. That include the use of B-splines for modeling non-linear station position evolution, the use of all non-tidal mass loadings in data reduction, the use of slant a priori path delays from the output of numerical weather models, the use of B-splines for evaluation of the Earth orientation parameters as a continuous function, the use of elevation-dependent weighting, processing both 24 hr and 1 hr experiments in a single least square solutions and other innovations. I will show how this changes in data analysis affect space geodesy results, such as estimation of station positions, Earth orientation parameters, and source coordinates.
An automated dynamics data analysis and management systems implemented on a DEC VAX minicomputer cluster is described. Multichannel acquisition, Fast Fourier Transformation analysis, and an online database have significantly improved the analysis of wideband transducer responses from Space Shuttle Main Engine testing. Leakage error correction to recover sinusoid amplitudes and correct for frequency slewing is described. The phase errors caused by FM recorder/playback head misalignment are automatically measured and used to correct the data. Data compression methods are described and compared. The system hardware is described. Applications using the data base are introduced, including software for power spectral density, instantaneous time history, amplitude histogram, fatigue analysis, and rotordynamics expert system analysis.
The authors report operational upgrades and streamlined data analysis of a commissioned electronic speckle interferometer (ESPI) in a permanent in-house facility at NASA's Goddard Space Flight Center. Our ESPI was commercially purchased for use by the James Webb Space Telescope (JWST) development team. We have quantified and reduced systematic error sources, improved the software operability with a user-friendly graphic interface, developed an instrument simulator, streamlined data analysis for long-duration testing, and implemented a turn-key approach to speckle interferometry. We also summarize results from a test of the JWST support structure (previously published), and present new results from several pieces of test hardware at various environmental conditions.
Basic analytical procedures are used to illustrate, both qualitatively and quantitatively, the relative impact upon heat transfer data analysis of certain factors which may affect the accuracy of experimental heat transfer data. Inaccurate knowledge of adiabatic wall conditions results in a corresponding inaccuracy in the measured heat transfer coefficient. The magnitude of the resulting error is extreme for data obtained at wall temperatures approaching the adiabatic condition. High model wall temperatures and wall temperature gradients affect the level and distribution of heat transfer to an experimental model. The significance of each of these factors is examined and its impact upon heat transfer data analysis is assessed.
Probabilistic graphical models (directed and undirected Markov fields, and combined in chain graphs) are used widely in expert systems, image processing and other areas as a framework for representing and reasoning with probabilities. They come with corresponding algorithms for performing probabilistic inference. This paper discusses an extension to these models by Spiegelhalter and Gilks, plates, used to graphically model the notion of a sample. This offers a graphical specification language for representing data analysis problems. When combined with general methods for statistical inference, this also offers a unifying framework for prototyping and/or generating data analysis algorithms from graphical specifications. This paper outlines the framework and then presents some basic tools for the task: a graphical version of the Pitman-Koopman Theorem for the exponential family, problem decomposition, and the calculation of exact Bayes factors. Other tools already developed, such as automatic differentiation, Gibbs sampling, and use of the EM algorithm, make this a broad basis for the generation of data analysis software.
Surveyor 7 post-landing tracking data analysis, and determining selenocentric location of probe and geocentric locations of tracking stations
Omega position location equipment /OPLE/ experiment data analysis, obtaining quantitative measure of statistical performance of system