Search NASA⌕ Search

SEARCH · Search NASA

Results for “Diffusivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Multicomponent diffusion in molten salt LiF-BeF{sub 2}: Dynamical correlations and Maxwell–Stefan diffusivities

Applying Green–Kubo formalism and equilibrium molecular dynamics (MD) simulations, we have studied the dynamic correlation, Onsager coeeficients and Maxwell–Stefan (MS) Diffusivities of molten salt LiF-BeF{sub 2}, which is used as coolant in high temperature reactor. All the diffusive flux correlations show back-scattering or cage dynamics which becomes pronouced at higher temperature. Although the MS diffusivities are expected to depend very lightly on the composition due to decoupling of thermodynamic factor, the diffusivity Đ{sub Li-F} and Đ{sub Be-F} decreases sharply for higher concentration of LiF and BeF{sub 2} respectively. Interestingly, all three MS diffusivities have highest magnitude for eutectic mixture at 1000K (except Đ{sub Be-F} at lower LiF mole fraction) which is desirable from coolant point of view. Although the diffusivity for positive-positive ion pair is negative it is not in violation of the second law of thermodynamics as it satisfies the non-negative entropic constraints.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of a Multivalent Ion–Solvent Interaction on Restricted Mg 2+ Diffusion in Dimethoxyethane Electrolytes

The diffusion behavior of Mg 2+ in electrolytes is not as readily accessible as that from Li + or Na + utilizing PFG NMR, due to the low sensitivity, poor resolution, and rapid relaxation encountered when attempting 25 Mg NMR. In MgTFSI 2 /DME solutions, “bound” DME (coordinating to Mg 2+ ) and “free” DME (bulk) are distinguishable from 1 H NMR. With the exchange rates between them obtained from 2D 1 H EXSY NMR, we can extract the self-diffusivities of free DME and bound DME (which are equal to that of Mg 2+ ) before the exchange occurs using PFG diffusion NMR measurements coupled with analytical formulas describing diffusion under two-site exchange. Further, the high activation enthalpy for exhange (65–70 kJ/mol) can be explained by the structural change of bound DME as evidenced by its reduced C–H bond length. Comparison of the diffusion behaviors of Mg 2+ , TFSI – , DME, and Li + reveals a relative restriction to Mg 2+ diffusion that is caused by the long-range interaction between Mg 2+ and solvent molecules, especially those with suppressed motions at high concentrations and low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Halide Substitution Effects on Lithium-Ion Diffusion in Protonated Antiperovskites

Solid-state electrolytes (SSEs) for all-solid-state lithium-ion batteries are generating intense interest because these batteries can improve the safety and performance compared with devices fabricated with conventional, flammable liquid electrolytes. In these SSEs, it has been suggested that Li + ion diffusion in the grain boundaries is hindered and is a critical determinant of the overall ionic conductivity (σ). However, Li + ion diffusivities in the grain (D G ) and the grain boundary (D GB ) are difficult to determine experimentally, with few techniques capable of distinguishing the individual contributions. Here, we distinguished the D G and D GB for the protonated lithium antiperovskites (pLiAPs) SSEs: Li 2 OHCl, Li 2 OHBr, Li 2 OHF 0.1 Cl 0.9 , Li 2 OHF 0.1 Br 0.9 , and Li 2 OHCl 0.3 7Br 0.63 . The measurements were obtained directly from 7 Li pulsed-field gradient nuclear magnetic resonance (PFG-NMR) at 353 K. The 7 Li PFG-NMR echo profiles were composed of two primary components with additional secondary oscillatory components – the so-called NMR diffraction phenomenon. The length scale separating the two main components corresponds to a diffusion length of ~1.7 µm, which is thought to be the average grain size (by diameter). The short-range (≤ 1.7 µm) diffusion component associated with D G (≈10 -11 m 2 /s) varied minimally with halide substitution, while the long-range (≥ 1.7 µm) component D GB (≈10 -12 to 10 -15 m 2 /s) was highly sensitive to the substitution of halides and closely correlated with s. In addition, from the comparison of the ratio D GB /D G to D t (the Li + ion diffusion coefficient estimated from the rotational correlation time, t c ), it was determined that the contribution of D G to σ is negligible; 0.01 ~ 0.04 in the pLiAPs studied here. Finally, these insights provide fundamental understanding of the halide substitution effects on Li + ion grain versus grain boundary diffusion, and suggest that careful engineering of the grain boundaries at the microscopic level is necessary to achieve high-performance pLiAP SSEs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding Diffusion in Hierarchical Zeolites with House-of-Cards Nanosheets

Introducing mesoporosity to conventional microporous sorbents or catalysts is often proposed as a solution to enhance their mass transport rates. Here, we show that diffusion in these hierarchical materials is more complex and exhibits non-monotonic dependence on sorbate loading. Our atomistic simulations of n-hexane in a model system containing microporous nanosheets and mesopore channels indicate that diffusivity can be smaller than in a conventional zeolite with the same micropore structure, and this observation holds true even if we confine the analysis to molecules completely inside the microporous nanosheets. Only at high sorbate loadings or elevated temperatures, when the mesopores begin to be sufficiently populated, does the overall diffusion in the hierarchical material exceed that in conventional microporous zeolites. Here, our model system is free of structural defects, such as pore blocking or surface disorder, that are typically invoked to explain slower-than-expected diffusion phenomena in experimental measurements. Examination of free energy profiles and visualization of molecular diffusion pathways demonstrates that the large free energy cost (mostly enthalpic in origin) for escaping from the microporous region into the mesopores leads to more tortuous diffusion paths and causes this unusual transport behavior in hierarchical nanoporous materials. This knowledge allows us to re-examine zero-length-column chromatography data and show that these experimental measurements are consistent with the simulation data when the crystallite size instead of the nanosheet thickness is used for the nominal diffusional length.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental and computational results on exciton/free-carrier ratio, hot/thermalized carrier diffusion, and linear/nonlinear rate constants affecting scintillator proportionality

Models of nonproportional response in scintillators have highlighted the importance of parameters such as branching ratios, carrier thermalization times, diffusion, kinetic order of quenching, associated rate constants, and radius of the electron track. For example, the fraction ηeh of excitations that are free carriers versus excitons was shown by Payne and coworkers to have strong correlation with the shape of electron energy response curves from Compton-coincidence studies. Rate constants for nonlinear quenching are implicit in almost all models of nonproportionality, and some assumption about track radius must invariably be made if one is to relate linear energy deposition dE/dx to volume-based excitation density n (eh/cm3) in terms of which the rates are defined. Diffusion, affecting time-dependent track radius and thus density of excitations, has been implicated as an important factor in nonlinear light yield. Several groups have recently highlighted diffusion of hot electrons in addition to thermalized carriers and excitons in scintillators. However, experimental determination of many of these parameters in the insulating crystals used as scintillators has seemed difficult. Subpicosecond laser techniques including interband z scan light yield, fluence-dependent decay time, and transient optical absorption are now yielding experimental values for some of the missing rates and ratios needed for modeling scintillator response. First principles calculations and Monte Carlo simulations can fill in additional parameters still unavailable from experiment. As a result, quantitative modeling of scintillator electron energy response from independently determined material parameters is becoming possible on an increasingly firmer data base. This paper describes recent laser experiments, calculations, and numerical modeling of scintillator response.

Williams, Richard↗

Graph-theoretical KMC Framework for Calculating Effective Diffusivity in TPBAR Components: Effective Diffusivity of Tritium in α-Zr Grain Boundaries

We report the development of a computer simulation tool based on the Graph-theoretical kinetic Monte Carlo (GT-KMC) approach that can be used to simulate diffusion and derive effective diffusivity of species in complex structures of TPBAR components. The GT-KMC framework was implemented in AKSOME, an on-lattice self-learning kinetic Monte Carlo tool developed at PNNL and was previously used to study solute diffusion in metal alloys. This newly developed tool will be helpful in simulating atom diffusion and extracting their effective diffusivities in grain boundaries and interfaces in various TPBAR components. Once benchmarked, the tool will be used to simulate the diffusion of tritium (hydrogen) along grain boundaries in α-Zr using the activation energy barrier data previously obtained from Density Functional Theory calculations.

36 MATERIALS SCIENCE↗

Impurity Diffusion Coefficients of Al and Zn in Mg Determined from Solid-to-Solid Diffusion Couples

Increasing use and development of lightweight Mgalloys have led to the desire for more fundamental research in and understanding of Mg-based systems. As property enhancing components, Al and Zn are two of the most important and common alloying elements for Mg-alloys. We have investigated the concentration dependent interdiffusion of Al and Zn in Mg using diffusion couples of pure polycrystalline Mg mated to Mg solid solutions containing either <9 at.% Al or <3 at.% Zn. Concentration profiles were determined by electron micro-probe microanalysis of the diffusion zone. The interdiffusion coefficients were determined by the classical Boltzmann-Matano method within the Mg solid solution. As the concentration of Al or Zn approaches the dilute ends, we employ an analytical approach based on the Hall method to estimate the impurity diffusion coefficients. Results of Al and Zn impurity diffusion in Mg are reported and compared to published impurity diffusion coefficients typically determined by thin film techniques.

Aluminum↗

Enhancing Cation Diffusion and Suppressing Anion Diffusion via Lewis-Acidic Polymer Electrolytes

Solid polymer electrolytes (SPEs) have the potential to increase both the energy density and stability of lithium-based batteries, but low Li + conductivity remains a barrier to technological viability. SPEs are designed to maximize Li + diffusivity relative to the anion while maintaining sufficient salt solubility. It is thus remarkable that poly(ethylene oxide) (PEO), the most widely used SPE, exhibits Li + diffusivity that is an order of magnitude smaller than that of typical counterions at moderate salt concentrations. In this paper, we show that Lewis-basic polymers like PEO favor slow cation and rapid anion diffusion, while this relationship can be reversed in Lewis-acidic polymers. Using molecular dynamics, polyboranes are identified that achieve up to 10-fold increases in Li + diffusivities and significant decreases in anion diffusivities, relative to PEO in the dilute-ion regime. These results illustrate a general principle for increasing Li + diffusivity and transference number with chemistries that exhibit weaker cation and stronger anion coordination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First principles calculations of point defect diffusion in CdS buffer layers: Implications for Cu(In,Ga)(Se,S){sub 2} and Cu{sub 2}ZnSn(Se,S){sub 4}-based thin-film photovoltaics

We investigate point defects in CdS buffer layers that may arise from intermixing with Cu(In,Ga)Se{sub 2} (CIGSe) or Cu{sub 2}ZnSn(S,Se){sub 4} (CZTSSe) absorber layers in thin-film photovoltaics (PV). Using hybrid functional calculations, we characterize the migration barriers of Cu, In, Ga, Se, Sn, Zn, Na, and K impurities and assess the activation energies necessary for their diffusion into the bulk of the buffer. We find that Cu, In, and Ga are the most mobile defects in CIGS-derived impurities, with diffusion expected to proceed into the buffer via interstitial-hopping and cadmium vacancy-assisted mechanisms at temperatures ∼400 °C. Cu is predicted to strongly favor migration paths within the basal plane of the wurtzite CdS lattice, which may facilitate defect clustering and ultimately the formation of Cu-rich interfacial phases as observed by energy dispersive x-ray spectroscopic elemental maps in real PV devices. Se, Zn, and Sn defects are found to exhibit much larger activation energies and are not expected to diffuse within the CdS bulk at temperatures compatible with typical PV processing temperatures. Lastly, we find that Na interstitials are expected to exhibit slightly lower activation energies than K interstitials despite having a larger migration barrier. Still, we find both alkali species are expected to diffuse via an interstitially mediated mechanism at slightly higher temperatures than enable In, Ga, and Cu diffusion in the bulk. Our results indicate that processing temperatures in excess of ∼400 °C will lead to more interfacial intermixing with CdS buffer layers in CIGSe devices, and less so for CZTSSe absorbers where only Cu is expected to significantly diffuse into the buffer.

36 MATERIALS SCIENCE↗

Production and diffusion of H 2 O 2 during the interaction of a direct current pulsed atmospheric pressure plasma jet on a hydrogel

The interaction of cold atmospheric pressure plasma jets with hydrogels has been used as a model system to study the interaction of plasmas with tissues. In this study, we analyze the diffusion of reactive oxygen species (in particular H 2 O 2 ) and quantify the amount of plasma-produced H 2 O 2 species that penetrates into a gelatin hydrogel. We show that the diffusion constant of H 2 O 2 in 10% gelatin hydrogel is similar to its diffusion constant in water and that the production of H 2 O 2 in the hydrogel is significantly less than the production of H 2 O 2 in distilled water for the same plasma operation conditions suggesting that the scavenging of OH radicals at the plasma-gel interface significantly reduces the H 2 O 2 production.

60 APPLIED LIFE SCIENCES↗