Search NASA⌕ Search

SEARCH · Search NASA

Results for “Directional patterns (antenna)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Low cost antennas for MSAT vehicular applications

For Mobile MSAT applications a number of vehicular antennas have been developed that meet the program requirements. They are, however, costly to manufacture. Two antenna candidates are described here that provide adequate gain in the coverage zone and are also lower cost. One is the mast antenna that uses three or four element arrays of aquadrifilar helices. It generates omnidirectional pattern in azimuth and its beam is scanned in elevation. The second unit is a planar spiral antenna; it generates directional beams by a summation of the azimuthal modes. A variation of this antenna uses conical spirals to fulfill the same task. In both cases beam scanning is achieved by means of electronic switches rather than phase shifters, thus resulting in simpler configurations.

Shafai, L.↗

A simple model for testing the effects of gravity-wave-produced vertical oscillations of scattering irregularities on spaced-antenna, horizontal drift measurements

It has been suggested that the velocities produced by the spaced antenna partial-reflection drift experiment may constitute a measure of the vertical oscillations due to short-period gravity waves rather than the mean horizontal flow. The contention is that the interference between say two scatterers, one of which is traveling upward, and the other down, will create a pattern which sweeps across the ground in the direction (or anti-parallel) of the wave propagation. Since the expected result, viz., spurious drift directions, is seldom, if ever, seen in spaced antenna drift velocities, this speculation is tested in an atmospheric model.

Meek, C. E.↗

Dielectric loaded aperture antennas.

This paper describes a primarily experimental study of the effect of placing dielectric obstacles having various geometries directly upon the aperture of circular and rectangular waveguide antennas. It is found that plexiglas spheres, and in some cases plexiglas cubes, one to four wavelengths in dimension, produce directive patterns with low sidelobes. The measured gain in some cases is 6 dB greater than the gain of an optimum horn having an equal aperture size.

Croswell, W. F.↗

Geophysical subsurface probing with radio-frequency interferometry

The radio-frequency interferometry method can be used to probe interiors of celestial bodies and terrestrial areas with low conductivity. In order to interpret the interference patterns, a theoretical study is made of the electromagnetic fields due to a dipole antenna on the surface of a horizontally stratified n-layered medium. Three approaches are used to calculate the interference patterns: direct numerical integration, asymptotic evaluation by the saddle point method, and a residue series approach. The asymptotic approach leads to the geometrical-optics interpretation. The residue approach leads to modal analysis. The validity of the formulation is checked by comparisons with analog model tank experiments and actual field data obtained from glaciers.

Kong, J. A.↗

Computation of the radiation characteristics of a generalized phased array

With the advent of monolithic microwave integrated circuit (MMIC) technology, the phased array has become a key component in the design of advanced antenna systems. Array-fed antennas are used extensively in today's multiple beam satellite antennas. A computer program based on a very efficient numerical technique for calculating the radiated power (Romberg integration), directivity, and radiation pattern of a phased array is described. The formulation developed is very general, and takes into account arbitrary element polarization, E- and H-plane element pattern, element location, and complex element excitation. For comparison purposes sample cases have been presented. Excellent agreement has been obtained for all cases. Also included are a user guide and a copy of the computer program.

Acosta, R. J.↗

Shared Aperture Metasurface Antennas for Multibeam Patterns

This paper describes various possibilities for designing multibeam antennas using a single metasurface (MTS) aperture. Both single-source and multi-source feeding schemes are considered. For the single-source case, two approaches are investigated: i) division of the aperture in several angular sectors (one per beam) and ii) superposition of the individual modulations required to obtain the beams in the desired directions. A configuration based on a multi-source feeding scheme is also tailored by a superposition of modulation patterns. Numerical results based on the Method of Moments are presented for validation.

leaky waves↗

Microstrip Antenna Generates Circularly Polarized Beam

Circular microstrip antenna excited with higher order transverse magnetic (TM) modes generates circularly polarized, conical radiation patterns. Found both theoretically and experimentally that peak direction of radiation pattern is varied within wide angular range by combination of mode selection and loading substrate with materials of different dielectric constants.

Huang, J.↗

DORIS satellite antenna maps derived from long-term residuals time series

Recent studies have shown that phase pattern models for the Jason-1 GPS antenna significantly benefit GPS-based precise orbit determination (POD) for the satellite. We have used a similar technique to derive DORIS receiver antenna maps, using all available DORIS tracking data over long time periods (from 1993.0 to 2004.0). We demonstrate that the derived correction models are satellite specific. For a given satellite, year-to-year estimations show clear systematic patterns. Some of these systematic patterns are attributable to the derivative of the multi-path effects in the direction of the satellite velocity. For early SPOT data, the patterns can be explained by an offset in the TAI time tagging (typically 8 (mu)s). In a second step, we have applied the SPOT2 antenna correction models in precise orbit determination and in the positioning of ground beacons. Preliminary results on DORIS/SPOT2 show that application of the DORIS antenna maps lead to a slight improvement of the derived POD and geodetic results (typically less than 5%).

precise orbit determination (POD)↗

An experimental investigation of high temperature superconducting microstrip antennas at K- and Ka-band frequencies

The recent discovery of high temperature superconductors (HTS) has generated a substantial amount of interest in microstrip antenna applications. However, the high permittivity of substrates compatible with HTS results in narrow bandwidths and high patch edge impedances of such antennas. To investigate the performance of superconducting microstrip antennas, three antenna architectures at K and Ka-band frequencies are examined. Superconducting microstrip antennas that are directly coupled, gap coupled, and electromagnetically coupled to a microstrip transmission line were designed and fabricated on lanthanum aluminate substrates using YBa2Cu3O7 superconducting thin films. For each architecture, a single patch antenna and a four element array were fabricated. Measurements from these antennas, including input impedance, bandwidth, patterns, efficiency, and gain are presented. The measured results show usable antennas can be constructed using any of the architectures. All architectures show excellent gain characteristics, with less than 2 dB of total loss in the four element arrays. Although the direct and gap coupled antennas are the simplest antennas to design and fabricate, they suffer from narrow bandwidths. The electromagnetically coupled antenna, on the other hand, allows the flexibility of using a low permittivity substrate for the patch radiator, while using HTS for the feed network, thus increasing the bandwidth while effectively utilizing the low loss properties of HTS. Each antenna investigated in this research is the first of its kind reported.

Richard, Mark A.↗

THz Radiation Generation to Enable Internal Magnetic Field Measurement of Burning Plasmas (Final Scientific Report)

A one-year experimental program was performed using the Multi-TeraWatt (MTW) laser at the Laboratory for Laser Energetics (LLE) to investigate the efficiency and physical process of laser-driven—wire THz generation. This process was evaluated as a potential high-repetition-rate source of powerful THz pulses for use in THz pulsed polarimetry of a moderate-density magnetic-confinement fusion concept developed by TAE. The goal was to develop a source for short pulses in the THz regime (150 μm wavelength) containing 10’s of mJ. The campaign tested the impact of Cu wire diameter (25, 75, 160 μm), length (250 – 750 μm), and laser irradiation orientation on THz production efficiency in comparison to 20-μm thick Cu foils. Of these targets, the 160 µm diameter, 750 µm long wires with sharpened tips and irradiated at the base were found to produce the highest energy and shortest wavelength THz pulses, exceeding 2.5 Joule/sr and meeting the requirements for the polarimetry diagnostic. The brightest THz signal was radiated in the direction of the sharpened wire tip. A combination of two models – a traveling wave antenna combined with coherent transition radiation – describes the emission pattern, pulse energy, and spectrum observed in the experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Near field testing of LARC multiple beam antenna

Near field antenna measurements as an alternative to far field measurements are discussed. Most of the serious shortcomings of far field measurements can be alleviated using near field techniques. The near field data can be used as a direct diagnostic of antenna performance before the integration by the aperture which can make it difficult to isolate the cause of far field pattern anomalies.

Lang, G. J.↗

Linearly tapered slot antenna circular array for mobile communications

The design, fabrication and testing of a conformal K-band circular array is presented. The array consists of sixteen linearly tapered slot antennas (LTSA). It is fed by a 1:16 microstrip line power splitter via electromagnetic coupling. The array has an omni-directional pattern in the azimuth plane. In the elevation plane the beam is displaced above the horizon.

Simons, Rainee N.↗

Validation of Aquarius Measurements Using Radiative Transfer Models at L-Band

Aquarius/SAC-D was launched in June 2011 by NASA and CONAE (Argentine space agency). Aquarius includes three L-band (1.4 GHz) radiometers dedicated to measuring sea surface salinity. We report detailed comparisons of Aquarius measurements with radiative transfer model predictions. These comparisons were used as part ofthe initial assessment of Aquarius data. In particular, they were used successfully to estimate the radiometer calibration bias and stability. Further comparisons are being performed to assess the performance of models in the retrieval algorithm for correcting the effect of sources of geophysical "noise" (e.g. the galactic background, atmospheric attenuation and reflected signal from the Sun). Such corrections are critical in bringing the error in retrieved salinity down to the required 0.2 practical salinity unit (psu) on monthly global maps at 150 km by 150 km resolution. The forward models making up the Aquarius simulator have been very useful for preparatory studies in the years leading to Aquarius' launch. The simulator includes various components to compute effects ofthe following processes on the measured signal: 1) emission from Earth surfaces (ocean, land, ice), 2) atmospheric emission and absorption, 3) emission from the Sun, Moon and celestial Sky (directly through the antenna sidelobes or after reflection/scattering at the Earth surface), 4) Faraday rotation, and 5) convolution of the scene by the antenna gain patterns. Since the Aquarius radiometers tum-on in late July 2011, the simulator has been used to perform a first order validation of the data. This included checking the order of magnitude ofthe signal over ocean, land and ice surfaces, checking the relative amplitude of signal at different polarizations, and checking the variation with incidence angle. The comparisons were also used to assess calibration bias and monitor instruments calibration drift. The simulator is also being used in the salinity retrieval. For example, initial assessments of the salinity retrieved from Aquarius data showed degradation in accuracy at locations where glint from the galactic sky background was important. This was traced to an inaccurate correction for the Sky glint. We present comparisons of the simulator prediction to the Aquarius data in order to assess the performances of the models of various physical processes impacting the measurements, such as the effect of sea surface roughness, the impact of the celestial Sky and the Sun emission scattered at the rough ocean surface. We discuss what components of the simulator appear reliable and which ones need improvements. Improved knowledge on the radiative transfer models at L-band will not only lead to better salinity retrieved from Aquarius data, it will also allow be beneficial for SMOS or the upcoming SMAP mission.

Dinnat, E.↗

Advances in Scanning Reflectarray Antennas Based on Ferroelectric Thin Film Phase Shifters for Deep Space Communications

Though there are a few examples of scanning phased array antennas that have flown successfully in space, the quest for low-cost, high-efficiency, large aperture microwave phased arrays continues. Fixed and mobile applications that may be part of a heterogeneous exploration communication architecture will benefit from the agile (rapid) beam steering and graceful degradation afforded by phased array antennas. The reflectarray promises greater efficiency and economy compared to directly-radiating varieties. Implementing a practical scanning version has proven elusive. The ferroelectric reflectarray, under development and described herein, involves phase shifters based on coupled microstrip patterned on Ba(x)Sr(1-x)TiO3 films, that were laser ablated onto LaAlO3 substrates. These devices outperform their semiconductor counterparts from X- through and K-band frequencies. There are special issues associated with the implementation of a scanning reflectarray antenna, especially one realized with thin film ferroelectric phase shifters. This paper will discuss these issues which include: relevance of phase shifter loss; modulo 2(pi) effects and phase shifter transient effects on bit error rate; scattering from the ground plane; presentation of a novel hybrid ferroelectric-semiconductor phase shifter; and the effect of mild radiation exposure on phase shifter performance.

Romanofsky, Robert R.↗

Polarimetric thermal emission from rough surfaces

Recent theoretical works have suggested the potential of passive polarimetry in the remote sensing of geophysical media. It was shown that the third Stokes parameter U of the thermal emission may become larger for azimuthally asymmetric fields of observation. In order to investigate the potential applicability of passive polarimetry to the remote sensing of ocean surface, measurements of the polarimetric thermal emission from a sinusoidal water surface and a numerical study of the polarimetric thermal emission from randomly rough ocean surfaces were performed. Measurements of sinusoidal water surface thermal emission were performed using a sinusoidal water surface which was created by placing a thin sheet of fiberglass with a sinusoidal profile in two dimensions extended infinitely in the third dimension onto a water surface. The theory of thermal emission from a 'two-layer' periodic surface is derived and the exact solution is performed using both the extended boundary condition method (EBC) and the method of moments (MOM). The theoretical predictions are found to be in good agreement with the experimental results once the effects of the radiometer antenna pattern are included and the contribution of background noise to the measurements is modeled. The experimental results show that the U parameter indicates the direction of periodicity of the water surface and can approach values of up to 30 K for the surface observed. Next, a numerical study of polarimetric thermal emission from randomly rough surfaces was performed. A Monte Carlo technique utilizing an exact method for calculating thermal emission was chosen for the study to avoid any of the limitations of the commonly used approximate methods in rough surface scattering. In this Monte Carlo technique, a set of finite rough surface profiles in two dimensions with desired statistics was generated and extended periodically. The polarimetric thermal emission from each surface of the set was then calculated using both the EBC and the MOM and the results were averaged. The surface statistics chosen were intended to model a wind perturbed ocean surface in the X to Ku band microwave region. The results indicate that the U parameter is sensitive to the azimuthal angle between the surface periodicity and the looking angle and to the rms height of the surface, and that the U parameter is fairly insensitive to variations in polar angle, permittivity, surface power law spectrum, and surface spectrum high frequency cutoff. These properties give further strength to the idea of using the U parameter to detect wind direction over the ocean.

Johnson, J. T.↗

Nonprincipal plane scattering of flat plates and pattern control of horn antennas

Using the geometrical theory of diffraction, the traditional method of high frequency scattering analysis, the prediction of the radar cross section of a perfectly conducting, flat, rectangular plate is limited to principal planes. Part A of this report predicts the radar cross section in nonprincipal planes using the method of equivalent currents. This technique is based on an asymptotic end-point reduction of the surface radiation integrals for an infinite wedge and enables nonprincipal plane prediction. The predicted radar cross sections for both horizontal and vertical polarizations are compared to moment method results and experimental data from Arizona State University's anechoic chamber. In part B, a variational calculus approach to the pattern control of the horn antenna is outlined. The approach starts with the optimization of the aperture field distribution so that the control of the radiation pattern in a range of directions can be realized. A control functional is thus formulated. Next, a spectral analysis method is introduced to solve for the eigenfunctions from the extremal condition of the formulated functional. Solutions to the optimized aperture field distribution are then obtained.

Balanis, Constantine A.↗

Antenna array research

Antenna array research on electromagnetic field problems in inhomogeneous media is presented along with characteristics of the Eaton lens. Comparisons are given of the radiation pattern and directivity of small Luneburg lens with a homogeneous lens. References and figure captions on radiation patterns are included.

Tai, C.↗

On-Orbit Validation of a Framework for Spacecraft-Initiated Communication Service Requests with NASA's SCaN Testbed

We design, analyze, and experimentally validate a framework for demand-based allocation of high-performance space communication service in which the user spacecraft itself initiates a request for service. Leveraging machine-to-machine communications, the automated process has potential to improve the responsiveness and efficiency of space network operations. We propose an augmented ground station architecture in which a hemispherical-pattern antenna allows for reception of service requests sent from any user spacecraft within view. A suite of ground-based automation software acts upon these direct-to-Earth requests and allocates access to high-performance service through a ground station or relay satellite in response to immediate user demand. A software-defined radio transceiver, optimized for reception of weak signals from the helical antenna, is presented. Design and testing of signal processing equipment and a software framework to handle service requests is discussed. Preliminary results from on-orbit demonstrations with a testbed onboard the International Space Station are presented to verify feasibility of the concept.

Adam M Gannon↗