Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dislocation structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Synergetic effects of dual-beam implantation on the microstructural development in silicon

We report a synergy effect on the microstructural development of silicon specimens as a result of dual-beam high temperature irradiation/implantation. In situ transmission electron microscopy experiments using two different experimental setups have been used, where the primary 50 keV Co{sup +} ion implantation beam was supplemented with either a 300 keV electron beam or a 500 keV Si{sup +} ion beam. In both cases, the secondary beam intensity was such that both beams created comparable overall primary damage. Completely different microstructural response has been found in these two cases. An intensive electron irradiation was found to sharply accelerate the evolution of dislocation structure, only weakly affecting the disilicide kinetics. On the contrary, the Si ion beam weakly affected the kinetics of either dislocation loops or coherent CoSi{sub 2} precipitates, but drastically increased the number density of thermodynamically unstable semicoherent precipitates. Possible microstructural reasons for the observed effects and the implications for both dislocation loop and cobalt disilicide nucleation mechanisms in high-temperature implanted TEM samples are discussed and supported by detailed molecular dynamics calculations of annealing of cascade remnants produced by the energetic silicon recoils.

36 MATERIALS SCIENCE↗

Extraordinary Strain Hardening from Dislocation Loops in Defect-Free Al Nanocubes

The complex interaction of crystalline defects leads to strain hardening in bulk metals. Metals with high stacking fault energy (SFE), such as aluminum, tend to have low strain hardening rates due to an inability to form stacking faults and deformation twins. Here, we use in situ SEM mechanical compressions to find that colloidally synthesized defect-free 114 nm Al nanocubes combine a high linear strain hardening rate of 4.1 GPa with a high strength of 1.1 GPa. These nanocubes have a 3 nm self-passivating oxide layer that has a large influence on mechanical behavior and the accumulation of dislocation structures. Post-compression TEM imaging reveals stable prismatic dislocation loops and the absence of stacking faults. MD simulations relate the formation of dislocation loops and strain hardening to the surface oxide. These results indicate that slight modifications to surface and interfacial properties can induce enormous changes to mechanical properties in high SFE metals.

36 MATERIALS SCIENCE↗

Quantitative measurements of dislocations in metals for advancing predictive simulations

LLNL applications require scientists to predict how materials evolve under various thermomechanical conditions. While this is achieved through physics-based simulations, uncertainty in the predictions of mechanical properties remains a serious challenge that limits the predictive capabilities of models because we lack methods to compare predictions of atomic-scale defects (dislocations) with experimental measurements. High energy X-ray diffraction (HEXRD) is the most relevant technique that can provide the necessary statistical information on dislocations. However, this technique is not yet quantitative because we lack a precise understanding of the relationship between X-ray diffraction patterns and the underlying material dislocation content and arrangements. To address this need, we used our novel computational X-ray diffraction method to simulate the effect of dislocations on the diffraction patterns. We compared virtual and experimental diffraction patterns. Results allowed us to clearly establish the relationship between X-ray diffraction patterns and the underlying dislocation structures, proving that it is feasible to quantitatively measure dislocation statistics with HEXRD. This project delivered a method that can provide the missing piece to LLNL’s mechanical property simulations in advanced metals by obtaining experimentally long-needed quantitative dislocation data, which could fully enable predictive capabilities.

36 MATERIALS SCIENCE↗

On the measurement of dislocations and dislocation substructures using EBSD and HRSD techniques

The accumulation of the dislocations and development of dislocation structures in plastically deformed Ni201 is examined using dedicated analyses of Electron Back-Scatter Diffraction (EBSD) acquired orientation maps, and High-Resolution Synchrotron Diffraction (HRSD) acquired patterns. The results show that the minimum detectable microstructure-averaged (bulk) total dislocation density ($ρ_T$) measured via HRSD is approximately 1E13 m -2 , while the minimum GND density ($ρ_G$) measured via EBSD is approximately 2E12 m -2 - the EBSD technique being more sensitive at low plastic strain. This highlights complementarity of the two techniques when attempting to quantify amount of plastic deformation (damage) in a material via a measurement of present dislocations and their structures. Furthermore, a relationship between EBSD-measured $ρ_G$ and the size of HRSD-measured Coherently Scattering Domains (CSDs) has been mathematically derived - this allows for an estimation of the size of CSDs from EBSD-acquired orientation maps, and conversely an estimation of $ρ_G$ from HRSD-measured size of CSDs. The measured evolution of ($ρ_T$), and $ρ_G$ is compared with plasticity theory models - the current results suggest that Ashby's single-slip model underestimates the amount of ONDs ($ρ_G$), while Taylor's model is correctly predicting the total amount of dislocation ($ρ_T$) present in the material as a function of imparted plastic strain.

36 MATERIALS SCIENCE↗

Structure and Phase Composition of Heat-Resistant Ni–Al–Co Alloy After Annealing and Creep

The paper presents research into the structure and phase composition of Ni–Al–Co alloy modified by rhenium (~3 аt.%) alloying. Observations are carried out using the transmission electron microscopy. The initial state of the alloy is the state after the directional crystallization. The alloy is further subjected to 900°С annealing during 1143 h. Creep tests are additionally carried out for this alloy at the same temperature and time and 400 MPa load. It is shown that FCC disordered γ- and ordered γ′-phases are major in all alloy states. Secondary phases are found to be σ-phase, χ-phase, Laves and AlRe{sub 2} phases. Experiments show that the high temperature annealing changes the phase composition of the alloy. Thus, the amount of the ordered γ′-phase increases, while that of disordered γ-phase decreases. During the creep process, the amount of the former reduces and the amount of the latter increases. The annealing process modifies the phase composition in secondary phases. It is found that the structural modification caused by the creep process differs from that caused by the annealing process. Thus, the creep-induced modification of the cuboid structure in γ′-phase is stronger than due to annealing. Dislocations are observed in γ- and γ′-phases in all states of the alloy. During the annealing process, the dislocation density in γ-phase is higher than in γ′-phase, and vice versa during the creep process. The experiments show that the behavior of the dislocation structures is different during the annealing and creep processes.

36 MATERIALS SCIENCE↗

Deformation microstructure and positive temperature dependence of flow stress in Ni{sub 3}Ge

Single crystalline specimens of Ni{sub 3}Ge were compressed along [0 0 1] at different temperatures. Temperature dependence of the critical resolved shear stress (τ{sub 0}(T)) has been obtained. Detailed measurements at cryogen temperatures (4.2-77 K temperature interval) showed that the increase of the yield stress with temperature starts at liquid helium temperature. The values of the apparent activation volume (V*) have been obtained as a result of stress relaxation tests repeated along the stress-strain curve at different stress levels at seven temperatures (77, 293, 373, 473, 573, 673, 773 K). Transmission electron microscopy (TEM) methods were used to analyze the evolution of dislocation structure with temperature and strain. The measurements of the straight dislocations fraction determined as δ = ρ{sub sd} / ρ, (ρ{sub sd} is the straight dislocation density, ρ is a total dislocation density) have been performed. The experimental data obtained in different tests in Ni{sub 3}Ge confirm two-stage nature of the positive temperature dependence of the flow stress of alloys with the L1{sub 2} structure. The model of thermal strengthening considering two different types of mechanisms, first acting at low temperatures and second at high has been proposed. Using this model the temperature dependence of the critical resolved shear stress has been approximated and the activation parameters of thermal strengthening of Ni{sub 3}Ge have been obtained.

36 MATERIALS SCIENCE↗

Quantitative investigation of the tensile plastic deformation characteristic and microstructure for friction stir welded 2024 aluminum alloy

The effect of the microstructure heterogeneity on the tensile plastic deformation characteristic of friction stir welded (FSW) 2024 aluminum alloy was investigated for the potential applications on light weight design of vehicles. The microstructure characteristics of the FSW joints, such as the grain structure, dislocation density and the distribution of precipitation, were studied by electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM). The tensile deformation characteristic of the FSW joints was examined using the automatic strain measuring system (ASAME) by mapping the global and local strain distribution, and then was analyzed by mechanics calculation. It is found that the tensile deformation of the FSW joints is highly heterogeneous leading to a significant decrease in global ductility. The FSW joints mainly contain two typical deformation zones, which show great effect on the regional inhomogeneous deformation. One is the nugget zone (NZ) with a region of 8 mm in width, and the other is part of the BM with a region of 10 mm in width. The BM of the joints is the weakest region where the strain localizes early and this localization extends until fracture with a strain over 30%, while the strain in the NZ is only 4%. Differences in regional strain of FSW joints, which are essentially controlled by grain structure, the distribution of precipitation and dislocation density, result in decrease on the overall mechanical properties. - Highlights: Black-Right-Pointing-Pointer Microstructure heterogeneity of welds on tensile deformation behavior is studied. Black-Right-Pointing-Pointer The welds contain two typical deformation zones, affecting the global ductility. Black-Right-Pointing-Pointer Regional strain of welds is controlled by grain structure and dislocation density. Black-Right-Pointing-Pointer Theoretical calculation is in good agreement with experimental result.

36 MATERIALS SCIENCE↗

Helical dislocation in twisted bilayer graphene

Here, we observe helical dislocation network in twisted bilayer graphene (tBLG), which is accompanied by large out-of-plane deformation. By atomistic calculations, we demonstrate two distinct out-of-plane deformation modes, breathing mode with small out-of-plane deformation and bending mode with one order larger corrugation magnitude compared to the breathing mode. The out-of-plane deformation is caused by inhomogeneous interlayer coupling resulting from the periodic stacking order of the tBLG moiré superlattice. Instead of commonly observed screw dislocation in tBLG, we demonstrate a slip-induced helical dislocation network in the bending mode tBLG. We show that bending mode deformation is more stable at low twist angles, as the energy savings due to interface energy exceeds the energy penalty due to the strain energy caused by the large out-of-plane deformation. Our work provides a detailed picture of a new helical dislocation structure in tBLG and establishes a direct connection between the dislocation and deformation. Therefore, understanding the dislocation mechanics of tBLG may open up the possibility to control the corrugation, and reveal an opportunity to tune the intriguing physical properties of twisted bilayer graphene.

36 MATERIALS SCIENCE↗

Effect of charged dislocation walls on mobility in GaN epitaxial layers

A theoretical model in the context of a conventional representation on traditional notion concerning Read cylinders for interpretation of mobility collapse as a function of the concentration of free carriers in GaN-based films is suggested. Along with phonon and impurity scattering mechanisms, electron scattering due to charged dislocations embedded into the walls is taken into account in the model. An expression is obtained for the height of the drift barrier depending on the concentration of free carriers. Based on the derived equations, the dependence of the location of the mobility minimum on the dislocation structure is interpreted.

36 MATERIALS SCIENCE↗

Structure of screw dislocation core in Ta at high pressure

The core structure and Peierls stress of the 1/2 〈111〉(110) screw dislocation in Ta have been investigated theoretically using the modified Peierls–Nabarro theory that takes into account the discreteness effect of crystal. The lattice constants, the elastic properties, and the generalized-stacking-fault energy(γ-surface) under the different pressures have been calculated from the electron density functional theory. The core structure of dislocation is determined by the modified Peierls equation, and the Peierls stress is evaluated from the dislocation energy that varies periodically as dislocation moves. The results show the core width and Peierls stress in Ta are weakly dependent of the pressure up to 100 GPa when the length and stress are measured separately by the Burgers vector b and shear modulus μ. This indicates that core structure is approximately scaling invariant for the screw dislocation in Ta. The scaled plasticity of Ta changes little in high pressure environment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Towards bend-contour-free dislocation imaging via diffraction contrast STEM

Dislocation imaging using transmission electron microscopy (TEM) has been an invaluable tool for characterizing crystallographic defects in metals. Compared to conventional TEM imaging, diffraction contrast imaging scanning transmission electron microscopy (DCI STEM) with appropriate setting can provide better defect contrast with almost negligible bend contour artifacts, enabling more effective analysis of dislocation structures. Here, we investigated why STEM can suppresses bend contour, and how dislocation contrast behaves along with different STEM imaging parameters. Using a body-centered cubic HT-9 ferritic/martensitic alloy as an example, a simple procedure and operational theory are described at the beginning to help set up DCI STEM experiments. Comparing with conventional TEM and the STEM strictly complying with the principle of reciprocity, we found that a pair of STEM convergence and collection semi-angles, α S and β S , a few milliradians in size is essential for bend-contour-free defect imaging. It works in concert such that the convergence STEM probe opens up the reciprocal space, and then a comparable collection region evens out the rocking-curve oscillation and alleviates bend contours from the reciprocal space. This fundamental advantage is unique in DCI STEM. Practical guidelines regarding STEM parameters and specimen orientation and thickness are then provided for DCI STEM dislocation imaging. Lastly, we show that coupling DCI STEM with spectrum images of electron energy loss spectroscopy and of energy-dispersive X-ray Spectroscopy offers a comprehensive characterization of crystallographic defects and chemical information of complex microstructures.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The influence of temperature on the strain-hardening behavior of Fe-22/25/28Mn-3Al-3Si TRIP/TWIP steels

In this work, the influence of temperature and stacking fault energy (SFE) on the strain-hardening behavior and critical resolved shear stress for twinning was investigated for three Fe–22/25/28Mn–3Al–3Si wt.% transformation- and twinning-induced plasticity (TRIP/TWIP) steels. The SFEs were calculated by two different methods, density functional theory and statistical thermodynamic modeling. The dislocation structure, observed at low levels of plastic deformation, transitions from “planar” to “wavy” dislocation glide with an increase in temperature, Mn content, and/or SFE. The change in dislocation glide mechanisms from planar to wavy reduces the strain hardening rate, in part due to fewer planar obstacles and greater cross slip activity. Additionally, the alloys exhibit a large decrease in strength and ductility with increasing temperature from 25 to 200 °C, attributed to a substantial reduction in the thermally activated component of the flow stress, predominate suppression of TRIP and TWIP, and a significant increase in the critical resolved shear stress for mechanical twinning. Interestingly, the increase in SFE with temperature had a rather minor influence on the critical resolved shear stress for mechanical twinning, and other temperature dependent factors which likely play a more dominant role are discussed.

36 MATERIALS SCIENCE↗

A Crystalline Plasticity Finite Element Method for Simulation of the Plastic Deformation of AZ31 Magnesium Alloys

In this paper, a constitutive framework based on a crystalline plasticity model is employed to simulate the plastic deformation of AZ31 magnesium alloy, which posses the hexagonal close packed (HCP) crystal structure. Dislocation slip and mechanical twinning are taken into account in the model. The successive integration method is used to determine the active slip systems, and the contribution of twinning to the grain reorientation is treated by the PTR method. The FE model is introduced into ABAQUS/Explicit through a user material subroutine (VUMAT). Three deformation processes of AZ31 magnesium alloy, including tension, compression and a stamping process, are simulated with the present method. The simulation results are compared with experiment and those presented in the literature.

36 MATERIALS SCIENCE↗

Stochastic dislocation kinetics and fractal structures in deforming metals probed by acoustic emission and surface topography measurements

We demonstrate that the fractal dimension (FD) of the dislocation population in a deforming material is an important quantitative characteristic of the evolution of the dislocation structure. Thus, we show that peaking of FD signifies a nearing loss of uniformity of plastic flow and the onset of strain localization. Two techniques were employed to determine FD: (i) inspection of surface morphology of the deforming crystal by white light interferometry and (ii) monitoring of acoustic emission (AE) during uniaxial tensile deformation. A connection between the AE characteristics and the fractal dimension determined from surface topography measurements was established. As a common platform for the two methods, the dislocation density evolution in the bulk was used. The relations found made it possible to identify the occurrence of a peak in the median frequency of AE as a harbinger of plastic instability leading to necking. It is suggested that access to the fractal dimension provided by AE measurements and by surface topography analysis makes these techniques important tools for monitoring the evolution of the dislocation structure during plastic deformation—both as stand-alone methods and especially when used in tandem.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Beyond Coherent Oxide Heterostructures: Atomic-Scale Structure of Misfit Dislocations

Nanoscale design of complex oxide heterostructures and thin films is imperative as they have significant promise in novel technological applications. A coherent interface is formed in oxide heterostructures with small mismatches, and the lattice mismatch is completely compensated by elastic strain. In semi-coherent oxide heterostructures, when an epitaxial layer is grown on the substrate above the critical thickness of the film, misfit dislocations are formed to mitigate the strain between the two materials with dissimilar lattice constants. Key properties of semi-coherent oxide heterostructures are influenced or even controlled by the presence of misfit dislocations. Thus, it is critical to understand the atomic-scale structure of semi-coherent oxide heterostructures, specifically the structure of misfit dislocations that are ubiquitous at such heterointerfaces. Numerous state-of-the-art experiments have reported emergent phenomena at semi-coherent oxide heterostructures, wherein misfit dislocations play a crucial role. Yet, their atomic-scale and nanoscale structure is not always discernable from experiments. Because of large system sizes, computational studies dedicated to examining misfit dislocations in semi-coherent oxide heterostructures are still in their infancy. This review aims to summarize the recent advancements and challenges involved in computational studies elucidating the atomic-scale structure of misfit dislocations in semi-coherent oxide heterostructures and motivate future computational efforts.

74 ATOMIC AND MOLECULAR PHYSICS↗

Reconstruction of Dislocation Potential Relief by Means of Self-Blocking Effect

The effect of dislocation self-blocking in intermetallic compounds with an anomalous temperature dependence of yield stress has been theoretically and experimentally analyzed. In essence, this effect is a dislocation self-immersion in a deep potential relief valley (without external stress). The possibility of reconstructing the relief shape (from one-valley to two-valley) is shown and the relief parameters are reported. The allowed and forbidden regions for self-blocking are revealed. The method for determining the ratio of the valley depths by measuring the self-blocking limiting angles between the dislocation segments is proposed. Transmission electron microscopy images of the dislocation structure can be used to this end. As an example, this ratio is estimated for a superpartial dislocation sliding in the cube plane in Ni{sub 3}Ge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi analysis of the effect of grain size on the dynamic behavior of microalloyed steels

This study presents some aspects of multiscale analysis and modeling of variously structured materials behavior in quasi-static and dynamic loading conditions. The investigation was performed for two different materials of common application: high strength microalloyed steel (HSLA, X65), and as a reference more ductile material, Ti-IF steel. The MaxStrain technique and one pass hot rolling processes were used to produce ultrafine-grained and coarse-grained materials. The efficiency and inhomogeneity of microstructure refinement were examined because of their important role in work hardening and the initiation and growth of fracture under tensile stresses. It is shown that the combination of microstructures characterized by their different features contributes to the dynamic behavior and final properties of the product. In particular, the role of solute segregation at grain boundaries as well as precipitation of carbonitrides in coarse and ultrafine-grained structures is assessed. The predicted mechanical response of ultrafine-grained structures, using modified KHL model is in reasonable agreement with the experiments. This is a result of proper representation of the role of dislocation structure and the grain boundary and their multiscale effects included in this model.

36 MATERIALS SCIENCE↗