Search NASA⌕ Search

SEARCH · Search NASA

Results for “Dynamic Profiling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Dynamic stall: An example of strong interaction between viscous and inviscid flows

A study was done of the phenomena concerning profiles in dynamic stall configuration, and more specially those related to pitch oscillations. The most characteristic experimental results on flow separations with a vortex character, and their repercussions on local pressures and total forces were analyzed. Some aspects of the methods for predicting flows with the presence (or not) of boundary layer separation are examined, as well as the main simplified methods available to date for the calculation of total forces in such configurations.

Philippe, J. J.↗

Dynamic wavelength control of laser pulse profiles at picosecond to nanosecond timescales

We report on a novel combined laser pulse shaping and dynamic wavelength encoding capability based on a simple architecture implementing direct space to time mapping. There are several potential applications that can be enabled by the ability to control the instantaneous intensity or wavelength of an optical waveform on a picosecond-to-nanosecond timescale. To our knowledge, no known methods can access this temporal regime with a practical architecture. Here, we demonstrate an extension of the Space–Time Induced Linearly Encoded Transcription for Temporal Optimization (STILETTO) technique that can generate optical waveforms with a programmable instantaneous wavelength vs. time. We experimentally demonstrate the technique by generating self-gated spectrograms and show that it can encode dynamic wavelength vs time profiles at timescales not achievable by any other known method.

47 OTHER INSTRUMENTATION↗

NUMERICAL SIMULATION OF HOT ACCRETION FLOWS. I. A LARGE RADIAL DYNAMICAL RANGE AND THE DENSITY PROFILE OF ACCRETION FLOW

Numerical simulations of hot accretion flow, both hydrodynamical and magnetohydrodynamical, have shown that the mass accretion rate decreases with decreasing radius; consequently, the density profile of accretion flow becomes flatter than in the case of a constant accretion rate. This result has important theoretical and observational implications. However, because of technical difficulties, the radial dynamic range in almost all previous simulations usually spans at most two orders of magnitude. This small dynamical range, combined with the effects of boundary conditions, makes the simulation results suspect. In particular, the radial profiles of density and inflow rate may not be precise enough to be used to compare with observations. In this paper, we present a ''two-zone'' approach to expand the radial dynamical range from two to four orders of magnitude. We confirm previous results and find that from r{sub s} to 10{sup 4} r{sub s} the radial profiles of accretion rate and density can be well described by M-dot (r){proportional_to}r{sup s} and {rho}{proportional_to}r {sup -p}. The values of (s, p) are (0.48, 0.65) and (0.4, 0.85) for the viscous parameters {alpha} = 0.001 and {alpha} = 0.01, respectively. More precisely, the accretion rate is constant (i.e., s = 0) within {approx}10r{sub s}, but beyond 10r{sub s} we have s = 0.65 and 0.54 for {alpha} = 0.001 and 0.01, respectively. We find that the values of both s and p are similar in all numerical simulation works irrespective of whether a magnetic field is included or not and what kind of initial conditions are adopted. Such an apparently surprising ''common'' result can be explained by the most recent version of the adiabatic inflow-outflow model. The density profile we obtain is in good quantitative agreement with that obtained from the detailed observations and modeling of Sgr A* and NGC 3115. The origin and implications of such a profile will be investigated in a subsequent paper.

79 ASTRONOMY AND ASTROPHYSICS↗

Planetary atmospheres

Observations and theoretical models of planetary atmospheres published during the period 1983-1986 are reviewed, including Vega and Voyager data and results from ground-based remote sensing. Consideration is given to water-vapor and sulfur-compound distributions, electrical phenomena, and dynamics in the Venus atmosphere; dust storms, water cycles, and water and ice erosion on Mars; the compositions, temperature profiles, and dynamics of the Jovian and Saturnian atmospheres; chemical processes and zonal winds on Titan; and the radiation budgets and chemical compositions of the outer planets.

Leovy, Conway↗

FlexiWay: A Cache Energy Saving Technique Using Fine-grained Cache Reconfiguration

Recent trends of CMOS scaling and use of large last level caches (LLCs) have led to significant increase in the leakage energy consumption of LLCs and hence, managing their energy consumption has become extremely important in modern processor design. The conventional cache energy saving techniques require offline profiling or provide only coarse granularity of cache allocation. We present FlexiWay, a cache energy saving technique which uses dynamic cache reconfiguration. FlexiWay logically divides the cache sets into multiple (e.g. 16) modules and dynamically turns off suitable and possibly different number of cache ways in each module. FlexiWay has very small implementation overhead and it provides fine-grain cache allocation even with caches of typical associativity, e.g. an 8-way cache. Microarchitectural simulations have been performed using an x86-64 simulator and workloads from SPEC2006 suite. Also, FlexiWay has been compared with two conventional energy saving techniques. The results show that FlexiWay provides largest energy saving and incurs only small loss in performance. For single, dual and quad core systems, the average energy saving using FlexiWay are 26.2%, 25.7% and 22.4%, respectively.

Cache leakage energy saving↗

Computing Stresses In Spur Gears

Dynamic Analysis of Spur Gear Transmissions (DANST) developed as easy-to-use program for static and dynamic analysis of spur-gear systems. Used for parametric studies to predict effects of operating speed, torque, stiffness, damping, inertia, and tooth profile on dynamic loads and tooth-bending stresses in spur gears. Performs geometric modeling and dynamic analysis for low- or high-contact-ratio spur gears. Simulates gear systems with contact ratios ranging from one to three. Written in FORTRAN 77.

Oswald, F. B.↗

Uniformity of spherical shock wave dynamically stabilized by two successive laser profiles in direct-drive inertial confinement fusion implosions

The implosion uniformity of a directly driven spherical inertial confinement fusion capsule is considered within the context of the Laser Mégajoule configuration. Two-dimensional (2D) hydrodynamic simulations have been performed assuming irradiation with two laser beam cones located at 49° and 131° with respect to the axis of symmetry. The laser energy deposition causes an inward shock wave whose surface is tracked in time, providing the time evolution of its non-uniformity. The illumination model has been used to optimize the laser intensity profiles used as input in the 2D hydro-calculations. It is found that a single stationary laser profile does not maintain a uniform shock front over time. To overcome this drawback, it is proposed to use two laser profiles acting successively in time, in order to dynamically stabilize the non-uniformity of the shock front.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamical models of highly flattened oblate elliptical galaxies with De Vaucouleurs' surface-brightness profiles

Two surveys of dynamical models of E6 elliptical galaxies were constructed with de Vaucouleurs'surface-brightness distributions. One set of models has a constant mass-to-light ratio. The other set consists of models embedded in oblate isothermal gravitational potentials. In both sets, the observed axis ratio of the models is 0.55 when viewed edge-on. When viewed edge-on, it is possible to construct models in either potential that have velocity-dispersion profiles that increase or decrease with radius along either or both principal axes. The observational data seem to indicate that dispersion profiles decrease or remain constant as function of radius. The most surprising result of this work is that in order for a model to have velocity-dispersion profiles that decrease with radius out to 1.5 r(e) along both principal axes, it must be dominated by fairly thin-walled tube orbits at large radii. This is very different from the spherical case, where radial orbits dominate at large radii.

Fillmore, James A.↗

Iodine Gas Adsorption in Nanoporous Materials: A Combined Experiment–Modeling Study

Here, we present a combined experimental and Grand Canonical Monte Carlo (GCMC) modeling study on the adsorption of iodine in three classes of nanoporous materials: activated charcoals, zeolites, and metal–organic frameworks (MOFs). Iodine adsorption profiles were measured for the first time in situ, with a uniquely designed sorption apparatus. It was determined that pore size and pore environment are responsible for a dynamic adsorption profile, correlated with distinct pressure ranges. At pressures below 0.3 atm, iodine adsorption is governed by a combination of small pores and extra-framework components (e.g., Ag+ ions in the zeolite mordenite). At regimes above 0.3 atm, the amount of iodine gas stored relates with an increase in pore size and specific surface area. GCMC results validate the trends noted experimentally and in addition provide a measure of the strength of the adsorbate–adsorbent interactions in these materials.

Sava Gallis, Dorina F.↗

Evolution of a Vortex in a Strain Flow

Experiments and vortex-in-cell simulations are used to study an initially axisymmetric, spatially distributed vortex subject to an externally imposed strain flow. The experiments use a magnetized pure electron plasma to model an inviscid two-dimensional fluid. The results are compared to a theory assuming an elliptical region of constant vorticity. For relatively flat vorticity profiles, the dynamics and stability threshold are in close quantitative agreement with the theory. Physics beyond the constant-vorticity model, such as vortex stripping, is investigated by studying the behavior of nonflat vorticity profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamic response of a plane-symmetrical exothermic reaction center.

?sger,An analysis of the dynamic behavior of an idealized, plane-symmetrical exothermic reaction center is presented. The conservation equations for the reaction center are combined and yield a single integral equation expressing a nonlinear transfer function of the system for which the input is provided by a given time profile of the heat released per unit mass while the output gives the pressure pulse it generates under the restriction of plane-symmetrical motion. The solution is governed by a Daumk]hler number. For a given form of the exothermic power pulse profile, the dynamic behavior of the system is completely specified in terms of only this Daumk]hler number and the heat of reaction per unit mass of the combustible medium. Specific solutions are worked out for a set of typical elementary power pulse profiles, and the practical significance of the results is illustrated by their application to the problem of transition to detonation in an explosive gas.

Meyer, J. W.↗

Review of recent theories and experiments for improving high-power microwave window breakdown thresholds

Dielectric window breakdown is a serious challenge in high-power microwave (HPM) transmission and radiation. Breakdown at the vacuum/dielectric interface is triggered by multipactor and finally realized by plasma avalanche in the ambient desorbed or evaporated gas layer above the dielectric. Methods of improving breakdown thresholds are key challenges in HPM systems. First, the main theoretical and experimental progress is reviewed. Next, the mechanisms of multipactor suppression for periodic rectangular and triangular surface profiles by dynamic analysis and particle-in-cell simulations are surveyed. Improved HPM breakdown thresholds are demonstrated by proof-of-principle and multigigawatt experiments. The current theories and experiments of using dc magnetic field to resonantly accelerate electrons to suppress multipactor are also synthesized. These methods of periodic profiles and magnetic field may solve the key issues of HPM vacuum dielectric breakdown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Uncertainty Error Modeling for Non-Linear State Estimation With Unsynchronized SCADA and µPMU Measurements

Distribution systems of the future smart grid require enhancements to the reliability of distribution system state estimation (DSSE) in the face of low measurement redundancy, unsynchronized measurements, and dynamic load profiles. Micro phasor measurement units (µPMUs) facilitate co-synchronized measurements with high granularity, albeit at an often prohibitively expensive installation cost. Supervisory control and data acquisition (SCADA) measurements can supplement µPMU data, although they are received at a slower sampling rate. Further complicating matters is the uncertainty associated with load dynamics and unsynchronized measurements–not only are the SCADA and µPMU measurements not synchronized with each other, but the SCADA measurements themselves are received at different time intervals with respect to one another. This paper proposes a non-linear state estimation framework which models dynamic load uncertainty error by updating the variances of the unsynchronized measurements, leading to a time-varying system of weights in the weighted least squares state estimator. Case studies are performed on the 33-Bus Distribution System in MATPOWER, using Ornstein–Uhlenbeck stochastic processes to simulate dynamic load conditions.

Cooper, Austin↗

On trajectory generation for flexible space crane: Inverse dynamics analysis by LATDYN

For future in-space construction facility, one or more space cranes capable of manipulating and positioning large and massive spacecraft components will be needed. Inverse dynamics was extensively studied as a basis for trajectory generation and control of robot manipulators. The focus here is on trajectory generation in the gross-motion phase of space crane operation. Inverse dynamics of the flexible crane body is much more complex and intricate as compared with rigid robot link. To model and solve the space crane's inverse dynamics problem, LATDYN program which employs a three-dimensional finite element formulation for the multibody truss-type structures will be used. The formulation is oriented toward a joint dominated structure which is suitable for the proposed space crane concept. To track a planned trajectory, procedures will be developed to obtain the actuation profile and dynamics envelope which are pertinent to the design and performance requirements of the space crane concept.

Chen, G.-S.↗

THE SUPERMASSIVE BLACK HOLE AND DARK MATTER HALO OF NGC 4649 (M60)

We apply the axisymmetric orbit superposition modeling to estimate the mass of the supermassive black hole (BH) and dark matter (DM) halo profile of NGC 4649. We have included data sets from the Hubble Space Telescope (HST), stellar, and globular cluster (GC) observations. Our modeling gives M{sub .} = (4.5 +- 1.0) x 10{sup 9} M{sub sun} and M/L{sub V,obs} = 8.7 +- 1.0 (or M/L{sub V} = 8.0 +- 0.9 after foreground Galactic extinction is corrected). We confirm the presence of a DM halo, but the stellar mass dominates inside the effective radius. The parameters of the dark halo are less constrained due to the sparse GC data at large radii. We find that in NGC 4649 the dynamical mass profile from our modeling is consistently larger than that derived from the X-ray data over most of the radial range by roughly 60%-80%. It implies that either some forms of non-thermal pressure need to be included, the assumed hydrostatic equilibrium may not be a good approximation in the X-ray modelings of NGC 4649, or our assumptions used in the dynamical models are biased. Our new M{sub .} is about 2 times larger than the previous published value; the earlier model did not adequately sample the orbits required to match the large tangential anisotropy in the galaxy center. If we assume that there is no DM, the results on the BH mass and M/L{sub V,obs} do not change significantly, which we attribute to the inclusion of HST spectra, the sparse GC kinematics, and a diffuse DM halo. Without the HST data, the significance of the BH detection is greatly reduced.

79 ASTRONOMY AND ASTROPHYSICS↗

A Model-Free Voltage Control Approach to Mitigate Motor Stalling and FIDVR for Smart Grids

Electric power networks are large and highly nonlinear dynamical systems that present unique challenges to control design. Though there is a large number of dynamic models for power system stability and control, many models are only useful with right assumptions and wrong for other tasks. Moreover, the dynamic behavior of the grid is increasingly complex under the banner of smart grids. These lead to the difficulty of developing appropriate dynamic modeling, and thus an efficient control strategy. To avoid such modeling challenges, here we present a novel dynamic voltage control strategy based on a model-free control (MFC) approach, requiring no modeling procedure. In particular, it focuses on fault-induced delayed voltage recovery (FIDVR) events, which require complex and accurate dynamic load models to replicate such events. This work utilizes MFC as an online controller to achieve the desired voltage stability under the FIDVR event. The proposed MFC strategy allows simple implementation and low computational cost for efficient mitigation of FIDVR. For benchmarking, a reasonably accurate dynamic performance model is explored. Simulation results with the IEEE 57 bus test network demonstrate the enhanced dynamic voltage profile for load buses having induction motors with the support of reactive power resources.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Control of Stochastic Gene Expression by Host Factors at the HIV Promoter

The HIV promoter within the viral long terminal repeat (LTR) orchestrates many aspects of the viral life cycle, from the dynamics of viral gene expression and replication to the establishment of a latent state. In particular, after viral integration into the host genome, stochastic fluctuations in viral gene expression amplified by the Tat positive feedback loop can contribute to the formation of either a productive, transactivated state or an inactive state. In a significant fraction of cells harboring an integrated copy of the HIV-1 model provirus (LTR-GFP-IRES-Tat), this bimodal gene expression profile is dynamic, as cells spontaneously and continuously flip between active (Bright) and inactive (Off) expression modes. Furthermore, these switching dynamics may contribute to the establishment and maintenance of proviral latency, because after viral integration long delays in gene expression can occur before viral transactivation. The HIV-1 promoter contains cisacting Sp1 and NF-kB elements that regulate gene expression via the recruitment of both activating and repressing complexes. We hypothesized that interplay in the recruitment of such positive and negative factors could modulate the stability of the Bright and Off modes and thereby alter the sensitivity of viral gene expression to stochastic fluctuations in the Tat feedback loop. Using model lentivirus variants with mutations introduced in the Sp1 and NF-kB elements, we employed flow cytometry, mRNA quantification, pharmacological perturbations, and chromatin immunoprecipitation to reveal significant functional differences in contributions of each site to viral gene regulation. Specifically, the Sp1 sites apparently stabilize both the Bright and the Off states, such that their mutation promotes noisy gene expression and reduction in the regulation of histone acetylation and deacetylation. Furthermore, the NF-kB sites exhibit distinct properties, with kB site I serving a stronger activating role than kB site II. Moreover, Sp1 site III plays a particularly important role in the recruitment of both p300 and RelA to the promoter. Finally, analysis of 362 clonal cell populations infected with the viral variants revealed that mutations in any of the Sp1 sites yield a 6-fold higher frequency of clonal bifurcation compared to that of the wild-type promoter. Thus, each Sp1 and NF-kB site differentially contributes to the regulation of viral gene expression, and Sp1 sites functionally ‘‘dampen’’ transcriptional noise and thereby modulate the frequency and maintenance of this model of viral latency. These results may have biomedical implications for the treatment of HIV latency.

59 BASIC BIOLOGICAL SCIENCES↗

Full-F gyrofluid model

A global electromagnetic gyrofluid model based on the full-F gyrokinetic model is derived. The gyrofluid moment variables are not split into fluctuating and equilibrium parts. Profiles are evolved freely, and gyro-averaging operators are not parametrized, but are functions of the gyrofluid moment variables. The fluid moment hierarchy is closed by approximating the gyrokinetic distribution function as a finite order Hermite-Laguerre polynomial and by determining closure approximations for terms involving the gyrokinetic gyro-averaging operator. The model exactly conserves the gyrokinetic full-F energy invariant evaluated using the Hermite-Laguerre decomposition. The model is suited for qualitative studies of the interplay between turbulence, flows, and dynamically evolving profiles in magnetically confined plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗