Search NASA⌕ Search

SEARCH · Search NASA

Results for “EL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Low-diffusion Xe-He gas mixtures for rare-event detection: electroluminescence yield

High pressure xenon Time Projection Chambers (TPC) based on secondary scintillation (electroluminescence) signal amplification are being proposed for rare event detection such as directional dark matter, double electron capture and double beta decay detection. The discrimination of the rare event through the topological signature of primary ionisation trails is a major asset for this type of TPC when compared to single liquid or double-phase TPCs, limited mainly by the high electron diffusion in pure xenon. Helium admixtures with xenon can be an attractive solution to reduce the electron diffusion significantly, improving the discrimination efficiency of these optical TPCs. We have measured the electroluminescence (EL) yield of Xe-He mixtures, in the range of 0 to 30% He and demonstrated the small impact on the EL yield of the addition of helium to pure xenon. For a typical reduced electric field of 2.5 kV/cm/bar in the scintillation region, the EL yield is lowered by ~ 2%, 3%, 6% and 10% for 10%, 15%, 20% and 30% of helium concentration, respectively. This decrease is less than what has been obtained from the most recent simulation framework in the literature. The impact of the addition of helium on EL statistical fluctuations is negligible, within the experimental uncertainties. The present results are an important benchmark for the simulation tools to be applied to future optical TPCs based on Xe-He mixtures.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Estimating evapotranspiration from deciduous broadleaf forests by considering the effect of foliar litter

Forest litter cover significantly alters the ground surface resistance, which influences the water and energy transfer processes between the land surface and atmosphere. Penman-Monteith (PM) model is widely used to estimate land surface evapotranspiration (ET). However, it was shown to overestimate ET during the period when foliar litter covers the ground surface. Therefore, incorporating the effect of foliar litter on ground surface resistance can potentially improve ET estimates. Here, in this study, we proposed a foliar litter surface resistance model to describe the effect of litter cover on water vapor transport, then incorporated the litter surface resistance into the PM model (noted as PM-EL model). The performance of the PM-EL model was evaluated using observations from 18 deciduous broadleaf forest (DBF) flux sites across global FLUXNET2015 datasets. Results showed that: (1) both the PM model and the PM-EL model are most sensitive to ground surface resistance among resistance parameters; (2) the proposed litter resistance model is capable of describing the seasonal dynamic of litter in DBF ; (3) the PM-EL model, has been shown to improve ET estimates with the coefficient of determination increased by 8.5 %, the mean absolute error and relative root mean square error decreased by 22.1 % and 20.9 %, respectively. The study contributes to our understanding of the effect of litter cover on ET estimation and provides insights into forest ecohydrology and land surface mass and energy transfer processes.

Deciduous Broadleaf Forest↗
DOE OSTI2026

A unified large language model–based framework for heterogeneous PV image diagnosis

With advances in imaging technologies, modern photovoltaic (PV) systems generate large volumes of heterogeneous image data, including visible, electroluminescence (EL), and infrared (IR) images. Existing PV image analysis models, particularly deep learning approaches, are typically task-specific and lack cross-modality generalization. To address this limitation, this paper proposes an open-source large language model (LLM)–based unified framework for heterogeneous PV image diagnostics. Through task-aware diagnostic prompting, the framework enables analysis of visible, EL, and IR images within a single pipeline, supporting both zero-shot and few-shot inference and binary and multiclass classification. It is compatible with state-of-the-art multimodal LLMs, including ChatGPT, Gemini, Claude, Qwen, and CLIP. The framework is evaluated on PV module condition classification (clean, soiling, snow, hail, and bird droppings) using visible images, cell crack detection using EL images, and hotspot detection using IR images. GPT-5.1 in few-shot mode achieves the best performance, with classification accuracy exceeding 97.3%. Open-source models such as Qwen and CLIP also deliver competitive results on visible images (around 90% accuracy), though their performance is more limited on EL and IR modalities. On the full ELPV dataset, the framework achieves 83.5% zero-shot accuracy, within 2.8% of the supervised CNN baseline, confirming scalability to larger benchmarks. Practical aspects such as reproducibility, response latency, and confidence estimation are systematically analyzed. The framework operates across PV image modalities without modality- or task-specific training, making it well suited as a rapid pre-screening tool to support downstream detailed diagnostics. A benchmark dataset of diverse labeled PV images is also released.

Li, Baojie↗
DOE OSTI2026

Control of Excitonic Energy Transfer in RGB Quantum Dot:Polymer Composites for Tunable White Emission

Tint-controlled white light is crucial for both illumination systems and display applications. Here, in this study, we demonstrate solution-processed quantum-dot light-emitting diodes (QD-LEDs) featuring a red–green–blue (RGB) QD–poly(methyl methacrylate) (PMMA) composite emissive layer (EML) for tunable white electroluminescence (EL). In this composite EML, PMMA functions as a dispersion matrix that modulates the interdot spacing (d), thereby controlling Förster resonance energy transfer (FRET) between QDs. By adjustment of the PMMA content, the balance of R, G, and B emissions is controlled, enabling systematic and continuous tuning of the EL color from greenish to reddish white at a fixed RGB ratio and constant driving bias. Time-resolved photoluminescence measurements confirm that the variation in the exciton lifetime with the PMMA fraction is the primary factor for tuning the EL color. Notably, nearly pure white EL with CIE coordinates close to (0.33, 0.33) is achieved using a diluted PMMA matrix without significant degradation of the electrical properties. Our results demonstrate d as an independent design parameter for decoupling color tuning from RGB composition and electrical operation, providing a versatile design framework for high-quality white- or tint-controlled QD-LEDs toward advanced solid-state lighting and display technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enhanced predictability of Eastern North Pacific Tropical cyclone activity using the ENSO Longitude Index

Past studies have indicated that El Nino-Southern Oscillation (ENSO) plays a major role in the interannual variability of Eastern Pacific hurricane activity. The primary mechanism being the eastward displacement of the warm pool during an El Nino, which carries warm water into that basin thereby creating favorable oceanic conditions. Despite this, the question of whether an accurate knowledge of ENSO enhances seasonal predictabiity of Eastern Pacific hurricanes has not been addressed specifically. In this study, we show that unlike traditional indices of ENSO, the ENSO Longitude Index (ELI) is able to predict Eastern Pacific hurricane activity at significant lead times. By capturing changes in the location of deep convection and associated thermocline processes more accurately, ELI explains the most variability in the upper-ocean heat content in the main development region of the Eastern Pacific basin compared to other ENSO indices. These results have substantial implications for operational seasonal forecasts of Eastern Pacific hurricanes.

Balaguru, Karthik↗
DOE OSTI2024

Toward digital design at the exascale: An overview of project ICECap

High performance computing has entered the Exascale Age. Capable of performing over 1018 floating point operations per second, exascale computers, such as El Capitan, the National Nuclear Security Administration's first, have the potential to revolutionize the detailed in-depth study of highly complex science and engineering systems. However, in addition to these kind of whole machine “hero” simulations, exascale systems could also enable new paradigms in digital design by making petascale hero runs routine. Currently, untenable problems in complex system design, optimization, model exploration, and scientific discovery could all become possible. Motivated by the challenge of uncovering the next generation of robust high-yield inertial confinement fusion (ICF) designs, project ICECap (Inertial Confinement on El Capitan) attempts to integrate multiple advances in machine learning (ML), scientific workflows, high performance computing, GPU-acceleration, and numerical optimization to prototype such a future. Built on a general framework, ICECap is exploring how these technologies could broadly accelerate scientific discovery on El Capitan. In addition to our requirements, system-level design, and challenges, we describe some of the key technologies in ICECap, including ML replacements for multiphysics packages, tools for human-machine teaming, and algorithms for multifidelity design optimization under uncertainty. As a test of our prototype pre-El Capitan system, we advance the state-of-the art for ICF hohlraum design by demonstrating the optimization of a 17-parameter National Ignition Facility experiment and show that our ML-assisted workflow makes design choices that are consistent with physics intuition, but in an automated, efficient, and mathematically rigorous fashion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Asymmetric response of Amazon forest water and energy fluxes to wet and dry hydrological extremes reveals onset of a local drought-induced tipping point

Understanding the effects of intensification of Amazon basin hydrological cycling—manifest as increasingly frequent floods and droughts—on water and energy cycles of tropical forests is essential to meeting the challenge of predicting ecosystem responses to climate change, including forest “tipping points”. Here, we investigated the impacts of hydrological extremes on forest function using 12+ years of observations (between 2001–2020) of water and energy fluxes from eddy covariance, along with associated ecological dynamics from biometry, at the Tapajós National Forest. Measurements encompass the strong 2015–2016 El Niño drought and La Niña 2008–2009 wet events. We found that the forest responded strongly to El Niño-Southern Oscillation (ENSO): Drought reduced water availability for evapotranspiration ( ET ) leading to large increases in sensible heat fluxes ( H ). Partitioning ET by an approach that assumes transpiration ( T ) is proportional to photosynthesis, we found that water stress-induced reductions in canopy conductance ( G s ) drove T declines partly compensated by higher evaporation ( E ). By contrast, the abnormally wet La Niña period gave higher T and lower E , with little change in seasonal ET . Both El Niño-Southern Oscillation (ENSO) events resulted in changes in forest structure, manifested as lower wet-season leaf area index. However, only during El Niño 2015–2016, we observed a breakdown in the strong meteorological control of transpiration fluxes (via energy availability and atmospheric demand) because of slowing vegetation functions (via shutdown of G s and significant leaf shedding). Drought-reduced T and G s , higher H and E , amplified by feedbacks with higher temperatures and vapor pressure deficits, signaled that forest function had crossed a threshold, from which it recovered slowly, with delay, post-drought. In conclusion, identifying such tipping point onsets (beyond which future irreversible processes may occur) at local scale is crucial for predicting basin-scale threshold-crossing changes in forest energy and water cycling, leading to slow-down in forest function, potentially resulting in Amazon forests shifting into alternate degraded states.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Theoretical Understanding of Effects of Operating Modes on the Performance Durability of Solid Oxide Cells: A Comparison between Potentiostatic and Galvanostatic Operations

In solid oxide cells (SOCs), the choice between galvanostatic (constant current) and potentiostatic (constant voltage) modes does not significantly affect the performance of SOCs as long as the cell components remain unchanged and intact. However, the degradation of cell components, which leads to changes in electrochemical and physical properties of the cell, elevates the importance of the selected operating mode. This paper aims to investigate the effects of galvanostatic and potentiostatic operating modes on the evolving properties of SOCs and their subsequent influence on performance durability. Employing non-equilibrium thermodynamic analysis, a crucial approach for understanding the degradation phenomena within an active electrochemical system, this study aims to provide in-depth insights into how these operating modes affect the longevity and efficacy of SOCs. Key findings include: In cases where oxygen electrode (OE) degradation is accelerated by higher partial pressure of oxygen ( p O 2 ), operating under constant voltage electrolysis can mitigate the high p O 2 at the OE|electrolyte (OE|EL) interface. Conversely, if OE degradation occurs more rapidly under a lower p O 2 , constant current electrolysis is more effective in suppressing degradation by achieving a high p O 2 at the OE|EL interface. For degradation of the fuel electrode (FE) due to higher p O 2 , constant current electrolysis is beneficial for more stable performance, which helps maintain low p O 2 at the FE|EL interface. When FE degradation is accelerated by lower p O 2 , constant voltage electrolysis can avert low p O 2 at the FE|EL interface. In practical scenarios, more complex degradation mechanisms come into play, especially when p O 2 significantly deviates from initial conditions. Degradation in one electrode can influence p O 2 in the other electrode, a phenomenon more pronounced in potentiostatic than in galvanostatic electrolysis.

Electrochemistry↗
DOE OSTI2024

Presentacion del Webinar Publico sobre Resultados Finales del Estudio PR100

Esta presentacion incluye un resumen de los resultados finales del Estudio de Resiliencia de la Red Electrica de Puerto Rico y Transiciones a Energia 100% Renovable (PR100). Dirigido por el Departamento de Energia y el Laboratorio Nacional de Energias Renovables, y financiado por la Agencia Federal para el Manejo de Emergencias, el estudio PR100 fue un esfuerzo de dos anos que ha resultado en caminos impulsados por las partes interesadas para que Puerto Rico alcance sus metas de energia limpia. For the English version of this presentation, see NREL/PR-6A20-88773 (https://www.nrel.gov/docs/fy24osti/88773.pdf).

100% renewable energy target↗
DOE OSTI2025

Estrategias de agua caliente para edificios comerciales: Una guia breve

Las calderas comerciales utilizan gas combustible o petroleo, y a veces electricidad, para producir agua caliente o vapor que se distribuye en un edificio para calefaccion de espacios y/o agua caliente sanitaria. Las calderas se encuentran en edificios de todos los tamanos, desde viviendas residenciales hasta grandes complejos comerciales y, en general, las calderas se vuelven menos eficientes y confiables con el tiempo. La vida util media de una caldera de gas es de 24 a 35 anos1 y, aunque la caldera continue funcionando, se debe planificar su reemplazo alrededor de los 15 a 20 anos de antiguedad o cuando aumentan las necesidades de mantenimiento. La lista de opciones de equipo para reemplazar calderas a gas esta creciendo, especialmente en lo que respecta a bombas de calor. Es fundamental evaluar las opciones para identificar la mejor solucion antes de su instalacion, antes de que sea necesario un reemplazo urgente. En muchos edificios existentes, el equipo se reemplaza con poca planificacion, lo que puede resultar en una operacion ineficiente, mayores costos y mantener al edificio en un ciclo de 25 anos de alto consumo energetico y emisiones. Al planificar un nuevo sistema de agua caliente, se deben considerar las emisiones de carbono, el consumo de energia, los costos y los cambios en las demandas del edificio para lograr un sistema optimo. Un enfoque colaborativo, integral e innovador puede resultar en un sistema mas limpio, energeticamente eficiente y rentable que cumpla con las necesidades de su instalacion y favorezca la disminucion de emisiones en el lugar. Este documento informativo asiste a propietarios y administradores de edificios en la planificacion del reemplazo de calderas, comprendiendo las opciones y encontrando las soluciones mas adecuadas para su situacion.

caldera↗
DOE OSTI2022

The understudied winter: Evidence of how precipitation differences affect stream metabolism in a headwater

Climate change is causing pronounced shifts during winter in the US, including shortening the snow season, reducing snowpack, and altering the timing and volume of snowmelt-related runoff. These changes in winter precipitation patterns affect in-stream freeze-thaw cycles, including ice and snow cover, and can trigger direct and indirect effects on in-stream physical, chemical, and biological processes in ~60% of river basins in the Northern Hemisphere. We used high-resolution, multi-parameter data collected in a headwater stream and its local environment (climate and soil) to determine interannual variability in physical, chemical, and biological signals in a montane stream during the winter of an El Niño and a La Niña year. We observed ~77% greater snow accumulation during the El Niño year, which caused the formation of an ice dam that shifted the system from a primarily lotic to a lentic environment. Water chemistry and stream metabolism parameters varied widely between years. They featured anoxic conditions lasting over a month, with no observable gross primary production (GPP) occurring under the ice and snow cover in the El Niño year. In contrast, dissolved oxygen and GPP remained relatively high during the winter months of the La Niña year. These redox and metabolic changes driven by changes in winter precipitation have significant implications for water chemistry and biological functioning beyond the winter. Our study suggests that as snow accumulation and hydrologic conditions shift during the winter due to climate change, hot-spots and hot-moments for biogeochemical processing may be reduced, with implications for the downstream movement of nutrients and transported materials.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Dispersive Charge Transfer State Electroluminescence in Organic Solar Cells

Abstract The notion of quasi‐equilibrium is central to most solar cells; however, it has been questioned in organic photovoltaics (OPVs) owing to strong energetic disorder that frustrates efficient relaxation of electrons and holes within their respective density of states (DOS). Here, modulation electroluminescence (EL) spectroscopy is applied to OPVs and it is found that the frequency response of charge transfer (CT) state EL on the high energy side of the spectrum differs from that of the low energy side. This observation confirms that static disorder contributes substantially to the linewidth of the steady‐state EL spectrum and is unambiguous proof that the distribution of CT states formed by electrical injection in the dark is not in quasi‐equilibrium. These results emphasize the need for caution when analyzing OPV cells on the basis of reciprocity models that assume quasi‐equilibrium holds, and highlight a new method to study this unusual aspect of OPV operation.

14 SOLAR ENERGY↗
DOE OSTI2026

UV-Induced Degradation and Associated Metastability in TOPCon Photovoltaic Modules: Understanding Kinetics and Cell Variance

Tunnel oxide passivated contact (TOPCon) silicon photovoltaic (PV) modules are dominating the PV market, but they may be susceptible to degradation under ultraviolet (UV)-containing light. Quantifying the impacts of UV-induced degradation (UVID) is complicated by an associated metastability causing further degradation under dark storage and rapid recovery under sunlight. Here, we study modules that have -2.3% to -3.2% nonrecoverable UVID loss after 60 kWh/m2 dose of 340 nm light and additional recoverable loss under dark storage. We use in situ electroluminescence (EL) imaging to characterize the post-UVID metastability at the module level. The cell-by-cell dark degradation and recovery kinetics span a wide range from +6% to -70% changes in EL intensity after 520 h of dark storage, which returns to +- 4% of the initial post-UVID EL intensity after illumination. The kinetics follow double exponential rates with dark storage degradation time constants of 345 and 45 h, and UV light recovery time constants of 5 min and 36 s. We propose that this is consistent with prior reports of kinetics for light-soaking metastability in Al2O3 passivation. Finally, we further show that cells having high UVID also have injection-dependent effective carrier lifetimes and significant intra-cell variance, suggesting possible origins of processing inconsistency.

14 SOLAR ENERGY↗
DOE OSTI2023

Accelerated Stress Testing of Perovskite Photovoltaic Modules: Differentiating Degradation Modes with Electroluminescence Imaging

Herein, electroluminescence (EL) and thermal imaging are used to examine p–i–n metal halide perovskite (MHP) photovoltaic (PV) mini-modules (MA0.6FA0.4PbI3, 20 cells, 78 cm2) before and after indoor-accelerated stress testing or outdoor deployment. Distinct spatial patterns in the EL images emerge, which depend on the external stress conditions experienced by the mini-module. Imaging results highlight a distribution of dark speckle features that dominate after UV stress, attributed to widespread interfacial contact degradation. Lateral intensity gradients across cells dominate after thermal cycling (TC) stress, attributed to current crowding near scribe defects. While current–voltage analysis alone does not give full insight on the degradation process, this study shows that distinct degradation modes can be further defined by multimodal electro-optical imaging (i.e., EL combined with photoluminescence and dark lock-in thermography). Neither UV exposure nor TC-accelerated stress testing alone replicates the same degradation signatures observed after outdoor deployment, suggesting that multiple degradation modes occur under concurrent stressors outdoors. Finally, spatial characterization of degradation modes in MHP PV mini-modules before and after accelerated stress testing lays the groundwork for developing targeted accelerated stress testing procedures through comparison with outdoor aging.

14 SOLAR ENERGY↗
DOE OSTI2026

Drought shifts dissolved organic matter sources from above- to belowground and stress-induced processes in Amazon white-sand forests

White-sand forests contribute significantly to dissolved organic matter (DOM) production in the central Amazon, forming blackwater rivers that dominate organic matter export from the Amazon basin to the ocean. Despite their importance in controlling DOM export, white-sand forests are understudied, and it remains unclear whether systematic changes in the formation of blackwater DOM occur and how seasonal variations and extremes like El Niño-associated droughts impact them. We collected soil porewater from two central Amazon white-sand forests for two years, spanning a wet La Niña year followed by an El Niño drought year. The molecular composition of DOM was analyzed using high-resolution mass spectrometry, and correlation network analysis was employed to identify ecologically meaningful DOM subsets. Using additional chemical characterization, database annotations, correlation with 14C-age of DOM and climatic variables, and ecological null modeling, we propose five distinct DOM sources: plant litter and throughfall, soil organic matter (SOM) decomposition, root exudation, and two drought response subsets of likely microbial and plant origin. During drought conditions, aboveground plant-derived compounds decreased, while SOM products, root exudates, and drought response compounds increased. These drought responses were qualitatively similar in both years but notably amplified in the drier El Niño year. Drought amplified deterministic control over DOM composition, indicating that DOM reflected directed biological responses and that future droughts are likely to generate similar shifts. Overall, drought substantially altered belowground carbon cycling by shifting DOM sources and inducing stress responses, effects expected to recur and potentially intensify under future climate scenarios.

Lange, Dan F.↗
DOE OSTI2025

Explainable artificial intelligence relates perovskite luminescence images to current-voltage metrics

As the demand for low-cost, high-efficiency solar energy technologies grows, metal halide perovskite (MHP) solar cells have emerged as a promising candidate for next-generation photovoltaics due to their high power conversion efficiencies. However, their poor durability and issues with manufacturing consistency remain significant barriers to commercialization. In this work, we develop deep learning models to support materials characterization and provide insight into features and processes influencing performance. The models are trained using transfer learning of a pretrained model to predict relevant current-voltage (IV) metrics based on different combinations of input electroluminescence (EL) and photoluminescence (PL) images of MHP devices. We examine which image types are most informative in accurately predicting different IV metrics. Additionally, we use explainable artificial intelligence (XAI) techniques to provide insights into specific spatial features in the devices that drive differences in performance. We find that stabilized luminescence images (e.g. those collected after biasing the devices for at least 1 min) are better for predicting metrics of open-circuit voltage (by PL) and short-circuit current (by PL with EL), but that predicting fill factor and overall power output may use the time-evolution of EL images. Based on attribution masks generated by integrated gradients for each device performance metric, we further suggest different loss mechanisms associated with categories of large and small spatial defects. Overall, this case study highlights the potential applicability of XAI methodology for streamlining MHP device analysis and accelerating detailed understanding of the relationships between spatial defects and impacts on performance.

14 SOLAR ENERGY↗
DOE OSTI2022

A correction procedure for self-induced velocity of a finite-sized particle in two-way coupled Euler–Lagrange simulations

The importance of incorporating a correction to undo the self-induced perturbation velocity of a particle, when its size becomes comparable to the Eulerian grid, in a two-way coupled Euler–Lagrange (EL) simulation is now well appreciated. The present work improves upon the prior correction procedures in a few important ways. First, the past correction procedures have been scalar-based with the assumption that the quasi-steady force is the source of self-induced velocity perturbation. Here we generalize to a vector correction procedure and thereby the directions of feedback force and relative velocity can be different. This allows the correction procedure to be used even in the presence of added-mass, history, and lift forces. Second, the effect of a nearby wall has been systematically included in the correction procedure. The correction procedure depends on fundamental Oseen solutions of streamwise and transverse regularized feedback forces. We present a Fourier transform-based analytical approach to obtaining these regularized Oseen solutions. We also present a step-by-step numerical procedure for obtaining the Oseen solutions in any EL code. With the analytical or numerical Oseen functions, the correction procedure can be easily implemented in any EL code. Iterations are required in solving the implicit correction equations and it is demonstrated that the correction procedure converges rapidly within three or four iterations. In conclusion, a simple empirical approach is also presented to account for unsteady effects in the correction procedure.

97 MATHEMATICS AND COMPUTING↗