Search NASA⌕ Search

SEARCH · Search NASA

Results for “ENGINES - COMPRESSION RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Conventional and Next Generation Treatment Technologies for PFAS - 20067

In 2016, the United States Environmental Protection Agency (USEPA) established a Health Advisory Limit (HAL) for perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) (individually and the summation) of 70 nanograms per liter (ng/L) based on developing toxicological information. These two compounds are among several thousand per- and polyfluoroalkyl substances (PFAS). Due to a multitude of commercially beneficial physical and chemical properties, the availability of PFAS-relevant and practical water treatment technologies is limited. The use of conventional adsorbents, such as activated carbon (AC) and anion exchange (AIX) resins, have become a 'de facto' interim measure to immediately address drinking water above this criterion. However, these adsorbents can have marginal long-term efficiency and are relatively unproven against the diversity of polyfluorinated compounds. Additionally, geochemical and/or co-contaminant competition can significantly impede adsorption based PFAS removal. These challenges may be addressed using engineered filtration, such as reverse osmosis or nanofiltration (RO/NF); however, for larger flow systems RO/NF may have unacceptable reject ratios as high as 35% and the capital cost may preclude these technologies. Extending these technologies to natural waters, which have various degrees of geochemical and co-contaminant competition, often requires a treatment train, combining conventional adsorbents or engineered filtration with pretreatment and more innovative and emerging remediation solutions for PFAS. Conventional and Next Generation water treatment technologies for PFAS generally employ one of three mechanisms (adsorption, separation, or destruction). These mechanisms include many types of technologies for both municipal drinking water and extracted natural water applications. The previously mentioned AC, AIX, and RO/NF are commercially available technologies that are actively being deployed for PFAS treatment. Research and development around these technologies is focused on optimization, and ultimate destruction of PFAS is achieved through incineration. Next Generation water treatment technologies include PFAS-specific flocculants, foam fractionation, novel AIX resins, new engineered adsorptive media, electrochemical treatment, sonolysis, and photolysis, radiation, and plasma (forms of advanced reductive processes [ARP]). Research and development around these technologies is focused on proof of concept and assimilation to real world applications. As the PFAS-relevant destructive technologies (such as incineration, electrochemical treatment, sonolysis, and ARP) are energy intensive, the state of the practice for PFAS water treatment is to focus adsorption/separation based technologies on reducing and concentrating the volume of water requiring destructive treatment. This enables more flexibility with respect to circulation frequency, residence time, and more control over energy usage. Water treatment for PFAS presently requires multiple technologies (i.e. a treatment train) to protect human health in a cost-conscious manner. An investment in research and development to explore new technologies is part of a key initiative for efficient protection of human health. This presentation attempts to review PFAS-relevant water treatment technologies and provide perspective as to their status with respect to applicability and commercial relevance. (authors)

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Comparison of Surface Tension Generation Methods in Smoothed Particle Hydrodynamics for Dynamic Systems

Developing robust numerical models of dynamic surface tension dominated multiphase systems is an ongoing challenge, especially in scenarios with large density and viscosity ratios. This is critical to the design and understanding of various physical and engineering systems, such as fluidized beds, fuel injectors, and drug delivery schemes. Much of the computational work in surface tension dominated multiphase flows has employed the continuum surface force method (CSF) of Brackbill et al. [1], which recasts surface tension from a surface force to a volumetric force that can be imposed in the vicinity of an interface. The CSF method produces accurate results across a variety of systems, however it relies on the identication of surface normals, which can be unreliable under certain conditions. Alternative methods of simulating surface tension have been proposed. Here the advantages and disadvantages of the CSF method in comparison to a pairwise forces (PF) method proposed by Tartakovsky and Panchenko [2] are explored. The CSF and PF methods are used in a smoothed particle hydrodynamics (SPH) framework to model dynamic systems. Results are compared to existing test cases from the literature and to analytic solutions derived from fundamental normal mode behavior of bubbles and droplets. A physical system for which the PF method is more stable and physically appropriate than the CSF method is identied.

smoothed particle hydrodynamics, multiphase flow↗
DOE OSTI2026

High magnetic field response of superconductivity dome in quantum artificial high−⁢𝑇 𝐶 superlattices with variable geometry

It is known that cuprate artificial high-𝑇 𝐶 superlattices (AHTS) with period 𝑑, composed of quantum wells confining interface space charge in stoichiometric Mott insulator layers (𝑆), with thickness 𝐿, at the interface with overdoped normal metallic cuprate layers (𝑁) show a superconducting dome by tuning the geometric 𝐿 over 𝑑 ratio of the SNSN superlattice with the top predicted by quantum material design engineering quantum size effects. Here we report high-field magnetotransport measurements up to 41 Tesla of AHTS across the entire superconducting dome. The results show the universal upward-concave behavior of the temperature-dependent upper critical magnetic field in low-𝑇 𝐶 samples at the rising edge and drop edge of the dome, providing strong evidence consistent with two-band superconductivity in agreement with multigap theory used for quantum design of the SNSN superlattices. The measured superconducting coherence length demonstrates that atomic-scale engineering controls not only the critical temperature but also the intrinsic pair size at Fano-Feshbach resonances physics paving the way toward next-generation quantum devices and shedding light on unconventional superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Gaseous contaminant transfer in membrane-based air-to-air energy exchangers

Membrane-based air-to-air energy exchangers (M–AAEEs) transfer heat and moisture between building exhaust air and fresh ventilation air streams through a membrane, thereby reducing the energy required for conditioning the fresh ventilation air. Energy exchangers are typically used in buildings with relatively clean building exhaust air, such as office buildings and schools. Recently interest in using energy exchangers in a wider range of buildings has grown, to reduce the energy consumption associated with the heating, ventilating, and air-conditioning (HVAC) systems in these buildings. However, if the building exhaust air is not clean, as would be the case for laboratories or factories, new risks are encountered when using energy exchangers. It is possible that gaseous contaminants in the exhaust air may also transfer along with the moisture through the membranes, contaminating the incoming fresh ventilation air. Current test standards provide a test procedure to determine the contamination of the fresh ventilation air by measuring the transfer of an inert tracer gas in an energy exchanger. However, the tracer gas test may not represent the transfer of common indoor air contaminants due to differences in their transport properties. Therefore, in this study, an experimental facility is developed to determine the transfer of seven different contaminants through two membranes (porous and dense) at different flow rates. Contaminant transfer is quantified using a parameter called the exhaust contaminant transfer ratio (ECTR), which gives the fraction of the contaminants transferred from the exhaust air to the fresh ventilation air. A theoretical model based on the effectiveness-number of transfer units (ε-NTU) correlation and moisture transfer resistance of the membrane is presented to determine transfer through porous membranes and validated with experimental results. The major contribution of this paper is that it presents a simple method to predict the transfer of different contaminants through a porous membrane based on the moisture transfer resistance of the membrane at different operating conditions. It is found that as contaminant diffusivity decreases, ECTR generally also decreases, and as the flow rate increases, ECTR decreases, which is consistent with the predictions from the correlation.

42 ENGINEERING↗
DOE OSTI2026

Impact of Hydrogen on Methane and Pollutant Emissions over Three-Way Catalysts with Natural Gas–Hydrogen Blends

Blending natural gas (NG) with hydrogen (H₂) can improve combustion and engine performance while potentially facilitating the catalytic conversion of methane and other pollutants, resulting in cleaner tailpipe emissions. This study evaluates the impact of H2 on the conversion of methane, CO, and NOx emissions on a commercial three-way catalyst (TWC) in a flow reactor using synthetic gas mixtures that simulate stoichiometric engine exhausts with NG or NG+H₂ combustion. The work examines whether, and how, the additional amount of H₂ in the exhaust stream affects the conversion efficiency of methane and other pollutants. Experiments were conducted with both degreened and aged catalysts under controlled conditions, systematically varying temperature, the air-to-fuel equivalence ratio (λ), and λ modulation. Test conditions covered λ values from 0.996 to 1.000 to represent nominally stoichiometric engine operation with different λ modulation amplitudes, as well as a range of temperatures to inform control strategies for effective CH₄, CO, and NOₓ reduction. Overall, the results show that hydrogen addition significantly improves the conversion efficiency of CH₄ and NOₓ, particularly at temperatures below 500 °C. More significantly, this study highlights that exhaust gas composition, operating temperature, λ management, and the oxygen storage capacity of the TWC all play major roles in affecting the tailpipe emissions from NG and NG+H₂ combustion.

Prikhodko, Vitaly [ORNL] (ORCID:0000000244685836)↗
DOE OSTI2021

A consistent and conservative volume distribution algorithm and its applications to multiphase flows using Phase-Field models

In the present study, the multiphase volume distribution problem, where there can be an arbitrary number of phases, is addressed using a consistent and conservative volume distribution algorithm. The proposed algorithm satisfies the summation constraint, the conservation constraint, and the consistency of reduction. The first application of the volume distribution algorithm is to determine the Lagrange multipliers in multiphase Phase-Field models that enforce the mass conservation, and a multiphase conservative Allen-Cahn model that satisfies the consistency of reduction is developed. A corresponding consistent and conservative numerical scheme is developed for the model. The multiphase conservative Allen-Cahn model has a better ability than the multiphase Cahn-Hilliard model to preserve under-resolved structures. The second application is to develop a numerical procedure, called the boundedness mapping, to map the order parameters, obtained numerically from a multiphase model, into their physical interval, and at the same time to preserve the physical properties of the order parameters. Along with the consistent and conservative schemes for the multiphase Phase-Field models, the numerical solutions of the order parameters are reduction consistent, conservative, and bounded, which are theoretically analyzed and numerically validated. Then, the multiphase Phase-Field models are coupled with the momentum equation by satisfying the consistency of mass conservation and the consistency of mass and momentum transport, thanks to the consistent formulation. Finally, it is demonstrated that the proposed model and scheme converge to the sharp-interface solution and are capable of capturing the complicated multiphase dynamics even when there is a large density and/or viscosity ratio.

42 ENGINEERING↗
DOE OSTI2021

Electromagnetic and Engineering Design of a High-Current 15-MeV/u Cyclotron

The capability to produce high current, low loss, and extracted external ion beams presents an enabling technology for nuclear security, isotope production, and medical applications. We report on a novel, continuous-wave cyclotron for accelerating light ions with a charge-to-mass ratio of 1/2, which is designed for 1 mA maximum and 15 MeV/u energy. This article details the conceptual electromagnetic (EM) and engineering design including the 1.1 T sector magnets and 45 MHz, 200 kV radio frequency (RF) cavities. We discuss the cyclotron beam parameters with respect to potential commercial and industrial applications. The general concept and the accelerator’s layout are followed by a detailed EM design of magnets and RF cavities. Finally, practical engineering design considerations will be provided.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

A case study: Eliminating nuisance within-part variation in assessing a measurement system

In this work, we consider a gauge R & R study in which a part measured in production is randomly placed in the measuring device. In assessing a measurement system, one does not want a possible within-part variation included in the estimated gauge variation and we propose a way to eliminate it. We consider a pellet measurement system and demonstrate the benefits of eliminating within-part variation in its assessment.

42 ENGINEERING↗
DOE OSTI2023

Manipulation of glycogen and sucrose synthesis increases photosynthetic productivity in cyanobacteria

Photosynthetic productivity is limited by low energy conversion efficiency in naturally evolved photosynthetic organisms, via multiple mechanisms that are not fully understood. Here we show evidence that extends recent findings that cyanobacteria use “futile” cycles in the synthesis and degradation of carbon compounds to dissipate ATP. Reduction of the glycogen cycle or the sucrose cycle in the model cyanobacterium Synechocystis 6803 led to redirection of cellular energy toward faster growth under simulated outdoor light conditions in photobioreactors that was accompanied by higher energy charge [concentration ratio of ATP/(ATP + ADP)]. Such manipulation of energy metabolism may have potential in engineering microalgal chassis cells to increase productivity of biomass or target metabolites.

09 BIOMASS FUELS↗
DOE OSTI2026

Bioengineered algal lipids enriched in structured medium- and long-chain triacylglycerols, linoleate, and sn -2 palmitate for human milk fat substitutes

Human milk fat (HMF) contains triacylglycerol (TAG) as its primary component, providing over 50% of the calories for infant nutrition, along with structural and bioactive lipids that are important for immune and nervous system development. Palmitic acid, comprising 20-25% of the fatty acid complement of HMF, is predominantly esterified to the sn -2 position on the glycerol backbone. This regiospecific positioning facilitates absorption as 2-palmitoyl-monoacylglycerol after hydrolysis of the fatty acids at sn -1 and sn -2 by gut lipases. Other features of HMF include enrichment in structured medium- and long-chain triglycerides (MLCTs), and variation in the ratio of oleic acid to linoleic acid with maternal diet and geography. We have engineered Auxenochlorella, an oleaginous green alga, for biosynthesis of an MLCT- and sn -2 palmitate-enriched HMF substitute for infant formula, matching the regioisomeric composition and proportions of the most abundant fatty acids in HMF.

Lin, Jon Y-T [University of California, Berkeley;]↗
DOE OSTI2020

Development of a Model Correlating Axial HEPA Filter Performance Between Elevated and Standard Conditions

The ASME AG-1 Code specifies minimum rated airflow based on standard cubic feet per minute (SCFM) for axial high efficiency particulate air (HEPA) filters and actual cubic feet per minute (ACFM) for radial HEPA filters with corresponding maximum pressure drop. A quantitative analysis can be performed to demonstrate the variation in filter efficiency and develop a correlation of performance between axial filters subjected to ACFM and SCFM. This study illustrates the variation in filter efficiency of axial HEPA filters subjected to ACFM and SCFM flow rate conditions at varying atmospheric pressures. It also presents the methods used to calculate correction factors to convert filter efficiency and pressure drop from elevated to standard conditions. The Axial Large Scale Test Stand (ALSTS) in the Institute for Clean Energy Technology (ICET) at Mississippi State University has been utilized to control aerosol concentration, flowrate, atmospheric pressure, relative humidity, and temperature. The filter test matrix consists of axial HEPA filters rated at 1,000 and 1,500 CFM with varying filter pack types. Each filter is subjected to varying pressures of 14.70 psi, 13.55 psi, 12.40 psi, and 11.25 psi, temperatures of 70 deg. F, 110 deg. F, and 150 deg. F, and relative humidities of 50% and 80%, resulting in twenty-four unique testing points. The corresponding SCFM flow rates are computed for each point in order to form a comparison. Evaluation of the effects of designating ACFM or SCFM will be based upon the filter efficiencies of generated Dioctyl Phthalate (DOP) particles at a diameter of 0.3 micrometers. The results show filter efficiency decreasing as atmospheric pressure decreases due to increased filter face velocity. A correlation model is developed to convert filter efficiency and pressure drop at elevated conditions to those of standard pressure, relative humidity, and temperature.

42 ENGINEERING↗
DOE OSTI2025

Mono‐Materials Created by Engineering a Continuum of P3HB Stereomicrostructures in a One‐Step Catalytic Process

Multi-material products that combine multiple complementary polymers can create products with desired performance but present challenges to end-of-life (EoL) management. The emerging mono-material product design based on a single polymer type addresses the fundamental EoL issue, but challenges of delivering vastly tunable material properties by the single polymer still remain. Here, we introduce a simple strategy to produce biodegradable poly(3-hydroxybutyrate) (P3HB) materials with a wide range of material properties by engineering a stereomicrostructure continuum, achieved through polymerizing diastereomeric mixtures of racemic and meso-dimethyl diolides at various feed ratios with a single catalyst. This one-step, one-pot process produces biodegradable P3HB mono-materials ranging from rigid to flexible thermoplastics, to tough thermoplastic elastomers, to a pressure-sensitive adhesive (PSA), which have been then combined to fabricate prototype all-P3HB PSA tapes, demonstrating the feasibility of designing mono-material products through engineering polymer stereomicrostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

A metabolic engineering strategy for producing poly-(3-hydroxyoctanoic acid) in Escherichia coli from glycerol

Poly(3-hydroxyoctanoate) (PHO) is a medium-chain-length PHA with low crystallinity and high elongation to break ratio, unlike the brittle short-chain-PHAs like PHB. These properties make PHO a promising candidate for industrial and biomedical applications. In this paper, we demonstrated the production of PHO in Escherichia coli from a renewable and inexpensive glycerol feedstock by engineering fatty acid synthesis and β-oxidation to create a pool of 2,3-octenoyl-CoAs. In this base strain, E. coli ΔfadRABIJ, an (R)-specific enoyl-CoA hydratase (phaJ) and a PHA synthase (phaC) were expressed to produce PHO. Bioprospecting phaJ and phaC homologs from Pseudomonas aeruginosa and fadD homolog from Pseudomonas putida implicated a combination of phaJ2, phaC2, and Pp fadD genes yielded the highest PHO content from exogenously fed octanoate. Finally, when a single copy of a previously described C 8 -specific thioesterase mutant CpFatB1.2-M4-287 was integrated into the chromosome of E. coli ΔfadRABIJ, the resulting E. coli strain NHL18 was capable of producing 3.69 ± 0.146 g/L of octanoic acid. Subsequently, the integration of PHA synthesis genes in NHL18 resulting in strain SM23 allowed the cell to accumulate 15 % cell dry weight of PHO with a final titer of 1.54 ± 0.234 g/L from glycerol in fed-batch fermentation.

Biodegradable plastic↗
DOE OSTI2022

Anisotropic Thermally Conductive Composites Enabled by Acoustophoresis and Stereolithography

Opportunities to improve thermal management in electronic devices are currently hindered by processing constraints that limit thermal conductivity in polymer-matrix composites. Active patterning of filler particles is a promising route to improve conductivity while retaining processability by improving particle contact density and directing heat along optimized pathways. Here, we employ acoustic patterning to align and compact filler particles into stripes during stereolithographic 3D printing. This approach produces polymer-based composite materials with highly efficient embedded heat transport pathways which reach 95 vol% particle utilization (relative to the parallel conduction upper limit). These composites exhibit anisotropic thermal conductivity up to 300% higher than unpatterned composites, with in-plane anisotropy ratios of up to 350%. Combining this high conductivity with 3D printing enables materials with engineered heat networks that optimize transport from hot spots to heatsinks while maintaining low viscosity for fast particle patterning and for infiltration around electronic components. Finally, numerical simulations of acoustic assembly of particles with varied geometry, when compared to experimentally characterized particle packing, illuminate pathways for further improving conductivity by optimizing particle geometry for alignment and stacking of particles with maximum contact surface area.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Parametric estimation of Poisson's ratio for thin hinged-hinged plates

Cornu's method is an elegant calculation besieged by an impractical approach to obtain accurate estimates for Poisson's ratio. Conventionally, Cornu's method requires several components, and each component can adversely affect the accuracy of the measurement. Furthermore, Cornu's conventional method requires a long beam because beams with short length-to-width ratios cause the estimate of Poisson's ratio to diverge from the true value of Poisson's ratio. We believe that, with the right modifications, Cornu's method can become an attractive approach to obtaining precise estimates for Poisson's ratio from mode shapes. Here we use finite element simulations to show how to use Cornu's method to estimate Poisson's ratio from a mode shape. Our modified Cornu's method removes knife-edges and loading components for a hinged-hinged plate under steady-state excitation. Given the true value of Poisson's ratio, as a performance specification, we show that simple parametric expressions can fit estimates for Poisson's ratio for different length-to-width ratios of thin hinged-hinged plates. Additionally, we show that estimates for Poisson's ratio from higher modes align with the results from the first mode and explain our expectation for this outcome. Furthermore, our results challenge the idea that anticlastic, monoclastic, and synclastic deformation uniquely correspond to positive, zero, and negative estimates of Poisson's ratio, respectively. With the emergence of materials-by-design, we expect that this parametric technique will be able to assist in experimental qualification of thin beam and plate structures with respect to the desired value of Poisson's ratio.

42 ENGINEERING↗
DOE OSTI2020

The effects of outdoor air-side fouling on frost growth and heat transfer characteristics of a microchannel heat exchanger: An experimental study

Air source heat pumps have the potential to efficiently heat and cool buildings, but their effectiveness in many climates is limited by frost growth on the outdoor heat exchanger in heating mode. These heat exchanger coils are also subject to fouling from fibers and particulates outdoors. Frost and fouling have each independently been studied extensively, and newly available research on fouling provides a method to realistically foul the air-side of coils in the laboratory. The current paper uses this method to conduct the first laboratory study of the important interactions between fouling and frost growth for a heat pump outdoor coil. A microchannel heat exchanger is tested clean and fouled, with variations in fouling level, humidity, and initial face velocity of air. Air flow rate is allowed to vary with resistance, and a surprising result is that light fouling increases heat transfer and frost growth rates, even with a 3.5% reduction in initial airflow caused by the fouling. However, heavier fouling decreases both rates. When frost growth is normalized to heat transfer, it is found to be increased by fouling; i.e. the coil’s sensible heat ratio decreases.

42 ENGINEERING↗
DOE OSTI2020

Etching sharp tips from thin metallic wires for tuning-fork-based scanning probe microscopy

Sharp tips are critical for obtaining high resolution images in scanning probe microscopy (SPM), particularly in samples with large variations in topography. For tuning-fork-based SPM, such tips are commonly obtained by electrochemical etching of metallic wires (e.g., tungsten). Electrochemical etching of metallic wires is the preferred means of preparing tips for scanning tunneling microscopy (STM), and techniques for obtaining sharp tips have been investigated extensively. However, the requirements for STM and tuning-fork-based SPM are different. In particular, the wires used in STM are typically 250-500 μ m in diameter, while the wires used for tuning-fork-based SPM are usually an order of magnitude narrower in order to minimize loading of the tuning fork: 25-50 μ m and sometimes down to a few micrometers in diameter. Consequently, many of the recipes developed for etching thicker metallic wires for STM tips do not give optimal results for smaller diameter wires. The authors describe here a modification of the etching circuit of Ibe et al . that significantly improves the reproducibility and reliability of the etching process for thin wires, and discuss the parameters that affect the aspect ratio of produced tips.

42 ENGINEERING↗
DOE OSTI2020

Experimental Measurements of NOx Emissions in a Rotating Detonation Engine

An experimental study of NOx emissions in a rotating detonation engine is presented in this paper. Rotating detonation engines produce a pressure gain in the combustion process which leads to increased efficiency compared to conventional constant pressure, deflagration based combustion. However, in order for rotating detonation engines to become a viable alternative to conventional combustion, they must meet NOx emissions regulations. Emissions from rotating detonation engines are not currently well understood. A parametric study was performed to determine time averaged NOx emissions in a rotating detonation engine over a range of operating conditions. The effects of inlet pre-heat, equivalence ratio, flow rate, and fuel composition are investigated.

Ferguson, Donald↗