Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electrical System”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6

Electrical System Trade Study for SUSAN Electrofan Concept Vehicle

The SUSAN Electrofan Aircraft concept is a subsonic regional jet transport aircraft that utilizes a single turbofan engine and Electrified Aircraft Propulsion (EAP) to enable propulsive and aerodynamic benefits to reduce fuel usage, emissions, and cost. This paper is a trade space exploration of the electrical system for the concept aircraft, including possible system architectures, and a review of the specific powers and efficiencies required for the electrical components to realize the EAP system.

Joseph M Haglage↗

Options and Risk for Qualification of Electric Propulsion System

Electric propulsion vehicle systems envelop a wide range of propulsion alternatives including solar and nuclear, which present unique circumstances for qualification. This paper will address the alternatives for qualification of electric propulsion spacecraft systems. The approach taken will be to address the considerations for qualification at the various levels of systems definition. Additionally, for each level of qualification the system level risk implications will be developed. Also, the paper will explore the implications of analysis verses test for various levels of systems definition, while retaining the objectives of a verification program. The limitations of terrestrial testing will be explored along with the risk and implications of orbital demonstration testing. The paper will seek to develop a template for structuring of a verification program based on cost, risk and value return. A successful verification program should establish controls and define objectives of the verification compliance program. Finally the paper will seek to address the political and programmatic factors, which may impact options for system verification.

Bailey, Michelle↗

Electrical system for pulse-width modulated control of a power inverter using phase-shifted carrier signals and related operating methods

Systems and methods are provided for pulse-width modulated control of power inverter using phase-shifted carrier signals. An electrical system comprises an energy source and a motor. The motor has a first set of windings and a second set of windings, which are electrically isolated from each other. An inverter module is coupled between the energy source and the motor and comprises a first set of phase legs coupled to the first set of windings and a second set of phase legs coupled to the second set of windings. A controller is coupled to the inverter module and is configured to achieve a desired power flow between the energy source and the motor by modulating the first set of phase legs using a first carrier signal and modulating the second set of phase legs using a second carrier signal. The second carrier signal is phase-shifted relative to the first carrier signal.

47 OTHER INSTRUMENTATION↗

Utility Investments in Resilience of Electricity Systems

Recent power outages caused by hurricanes, wildfires and other natural disasters, coupled with evolving cyber and physical threats, have increased interest in the resilience of electricity systems. The U.S. Department of Energy’s Grid Modernization Lab Consortium (GMLC) defines resilience as “the ability to prepare for and adapt to changing conditions and withstand and recover rapidly from disruptions, including the ability to withstand and recover from deliberate attacks, accidents, or naturally occurring threats or incidents.” In a new report for Berkeley Lab, organizations that represent state regulators, utilities and consumers discuss the level and scope of resilience needed, how to decide what investments are most impactful, and roles of local, state and federal officials.

24 POWER TRANSMISSION AND DISTRIBUTION↗

An Electrified Future: Initial Scenarios and Future Research for U.S. Energy and Electricity Systems

As an energy source, Electricity benefits from a number of desirable characteristics: it can be transported at nearly the speed of light with transmission infrastructure, it has zero enduse emissions, it is highly flexible and controllable, it is now storable at rapidly declining costs, and it can offer improved service quality relative to conventional fuels. As such, electrification-the conversion of previously fossil-fueled end-use processes to electricity-has been identified as a key pathway to a clean, reliable, and secure energy future. Electric vehicles are the most widely cited application of electrification, but technology improvements in electrically driven devices for buildings and industrial end uses, including heat pumps for space and water heating needs, induction stoves for cooking, infrared or ultraviolet curing processes, and electric arc furnaces for process heating, could lead to more widespread electrification across these sectors.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Analysis methods for wind turbine control and electrical system dynamics

The integration of new energy technologies into electric power systems requires methods which recognize the full range of dynamic events in both the new generating unit and the power system. Since new energy technologies are initially perceived as small contributors to large systems, little attention is generally paid to system integration, i.e. dynamic events in the power system are ignored. As a result, most new energy sources are only capable of base-load operation, i.e. they have no load following or cycling capability. Wind turbines are no exception. Greater awareness of this implicit (and often unnecessary) limitation is needed. Analysis methods are recommended which include very low penetration (infinite bus) as well as very high penetration (stand-alone) scenarios.

Hinrichsen, E. N.↗

Electrical and thermal transport properties of the electron-doped cuprate Sm 2- x Ce x CuO 4- y system

Electrical and thermal transport measurements were performed on thin films of the electron-doped superconductor Sm 2- x Ce x CuO 4- y (x = 0.13 - 0.19) in order to study the evolving nature of the charge carriers from the under-doped to over-doped regime. A temperature versus cerium content (T - x) phase diagram has been constructed from the electrical transport measurements, yielding a superconducting region similar to that found for other electron-doped superconductors. Thermopower measurements show a dramatic change from the underdoped region (x < 0.15) to the overdoped region (x > 0.15). Application of the Fisher–Fisher–Huse (FFH) vortex glass scaling model to the magnetoresistance data was found to be insufficient to describe the data in the region of the vortex-solid to vortex-liquid transition. It was found instead that the modified vortex glass scaling model of Rydh, Rapp, and Anderson provided a good description of the data, indicating the importance of the applied field on the pinning landscape. A magnetic field versus temperature (H - T) phase diagram has also been constructed for the films with $x\geqslant 0.14$ , displaying the evolution of the vortex glass melting lines H g (T) across the superconducting regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Robotics for Systems Integration in Buildings: Pilot Study of Viable Approaches to Install Hygrothermal and Rigid Electrical Systems

The Industrialized Construction Innovation (ICI) team at the National Renewable Energy Laboratory (NREL) has been exploring the use of robotics to integrate hygrothermal, mechanical, electrical, and plumbing systems in prefabricated building assemblies (off-site construction) and 3D-printed buildings (on-site construction). Such multisystem integration tasks often require specialized robots and custom end effectors to handle a range of rigid and nonrigid building components. This paper begins with a brief overview of the current state of robotics in construction, followed by a pilot study exploring the use of robotics to integrate a simple prototype multitrade wall assembly composed of structural studs, hygrothermal layer, wall finishing, and electrical fixtures. The study was funded by the US Department of Energy's (DOE's) Advanced Materials and Manufacturing Technologies Office (AMMTO). Insights about the implementation of design for manufacturing and assembly (DfMA) principles in designing the prototype wall for robotic assembly, and selection of appropriate robotic end-effector hardware to handle these components are included. Detailed comparison of computational toolpath simulations of the robotic assembly process and real-life demonstration of the same are presented. Finally, limitations and lessons learned from this study are included, along with future research recommendations for robotic assembly of more complex multitrade assemblies, including potential scenarios such as robotic outfitting of facilities in extraterrestrial environments.

advanced manufacturing↗

Robotics for Systems Integration in Buildings - Pilot Study of Viable Approaches to Install Hygrothermal and Rigid Electrical Systems: Preprint

The Industrialized Construction Innovation (ICI) team at the National Renewable Energy Laboratory (NREL) has been exploring the use of robotics to integrate hygrothermal, mechanical, electrical, and plumbing systems in prefabricated building assemblies (offsite construction) and 3D Printed buildings (onsite construction). Such multi-system integration tasks often require specialized robots and custom end-effectors for handling a range of rigid and non-rigid building components. This paper begins with a brief overview of the current state of robotics in construction, followed by a pilot study exploring the use of robotics to integrate a simple prototype multi-trade wall assembly composed of structural studs, hygrothermal layer, wall finishing, and electrical fixtures. The study was funded by the Department of Energy's (DOE) Advanced Materials and Manufacturing Technologies Office (AMMTO). Insights about the implementation of design for manufacturing and assembly (DfMA) principles in designing the prototype wall for robotic assembly, and selection of appropriate robotic end effector hardware for handling these components are included. Detailed comparison of computational toolpath simulations of the robotic assembly process and real-life demonstration of the same is presented. Finally, limitations and lessons learned from this study along with future research recommendations for robotic assembly of more complex multi-trade assemblies, including potential scenarios such as robotic outfitting of facilities in extra-terrestrial environments is included.

advanced manufacturing↗

Simulation of a Flywheel Electrical System for Aerospace Applications

A Flywheel Energy Storage Demonstration Project was initiated at the NASA Glenn Research Center as a possible replacement for the battery energy storage system on the International Space Station (ISS). While the hardware fabrication work was being performed at a university and contractor's facility, the related simulation activity was begun at Glenn. At the top level, Glenn researchers simulated the operation of the ISS primary electrical system (as described in another paper) with the Flywheel Energy Storage Unit (FESU) replacing one Battery Charge and Discharge Unit (BCDU). The FESU consists of a Permanent Magnet Synchronous Motor/Generator (PMSM), which is connected to the flywheel; the power electronics that connects the PMSM to the ISS direct-current bus; and the associated controller. The PMSM model is still under development, but this paper describes the rest of the FESU model-the simulation of the converter and the associated control system that regulates energy transfer to and from the flywheel.

Truong, Long V.↗

Electrical power systems.

Electric power generation systems considering chemical, solar and nuclear energy sources and types of conversion

NUCLEAR ENERGY↗

The use of price-based demand response as a resource in electricity system planning

Utilities have conducted IRP for decades to consider both supply- and demand-side resources to meet bulk power system needs. More recently, an increasing number of states are requiring regulated utilities to file plans that identify distribution system needs, including DERs that can avoid or defer certain types of traditional utility investments cost-effectively. Price-based demand response (DR) is an underutilized resource that could substantially contribute to load flexibility. We find that evaluation of price-based DR as a solution to meet identified electricity system needs is uncommon at both planning processes. Where price-based DR is considered as a solution, methodologies are often deficient in the characterization and treatment of this resource. Based on our analysis of utility filings and state requirements, this brief provides recommendations for improving consideration of price-based DR in the context of long-term planning for bulk power and distribution systems.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Jupiter Icy Moons Orbiter (JIMO) Electrical Systems Testbed

The Jupiter Icy Moons Orbiter (JIMO) mission will send a spacecraft to explore three of Jupiter s moons (Callisto, Ganymede, and Europa), all of which show evidence of containing vast subterranean oceans beneath their icy surfaces. The evidence of these oceans was discovered by Galileo, and the moons are believed to have the three essential ingredients for life: water, energy, and the necessary chemical elements. Galileo has shown that melted water on Europa has been in contact with the surface of the moon in geologically recent times, and may still lie relatively close to the surface. This project will also introduce a revolutionary new form of electric propulsion powered by a nuclear fission reactor. This electric propulsion is called ion propulsion. It was used on a previous mission called Deep Space 1, proving that ion propulsion works for interplanetary travel. Since JIMO will be traveling farther from the sun, solar power will be difficult to supply the electric energy demanded by the mission. Therefore a nuclear reactor and a thermo-electric converter system will be necessary. Besides making the trip to three of Jupiter's moons - one after the other - a realistic possibility, this new form of power and propulsion opens up the rest of the outer solar system for future exploration. JIMO will fulfill its goals by exploring Europa first, with subsequent trips to the moons Callisto and Ganymede in order to provide comparisons key to understanding the evolution of all three. In order to ensure the stability and proper preparation of the electrical system on JIMO, the High Power AC Power Management and Distribution (PMAD) Test Bed is being developed. The testing on.this AC PMAD will consist of electrical performance verification of candidate power system components. Examples of these components are: high power AC switchgear, high power ACDC converters, AC power distribution units, DC power distribution units, etc. Throughout the course of the summer the over-current control circuit for the five different size relays will be constructed and tested. This circuit will sense the current input to the spacecraft loads and automatically switch off power if the current is too high. Once the circuit is verified to function properly and all necessary modifications have been made, a circuit schematic and board layout will have to be drawn using OrCAD, and the circuits will have to be built.

Trapp, Scott J.↗

The prospective impacts of 2019 state energy policies on the U.S. electricity system

Over the past several years state energy policies have been evolving rapidly, and are more frequently including higher targets, including 100% clean energy targets. This study assesses the aggregate impacts of state clean energy standards and emissions policies on national electricity generation, power sector carbon dioxide (CO 2 ) emissions, and electricity prices and system costs. To do so, we apply the Regional Energy Deployment System (ReEDS) model, which is a detailed electric sector capacity expansion model, to evaluate scenarios with and without state policies and using a range of renewable energy technology cost projections. Across the scenarios analyzed, we find that the state policies drive 1.9%–10.7% of total nationwide clean energy and reduce cumulative power sector CO 2 emissions by 2.6%–5.4% over the 2020–2050 study period. This incremental generation is predominantly, but not exclusively, from renewable energy technologies. In most cases, the state policies result in increases to electricity prices and electricity system costs, and policy costs are sensitive to the future cost of clean energy technologies. Across all scenarios, the levelized cost of incremental policy-driven clean energy generation is estimated to be $17–38/MWh and the average cost of CO 2 abatement from the state-level policies is estimated to be $29–74/metric ton.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

An evaluation of electricity system technology competitiveness metrics: The case for profitability

In this work we develop standardized functional forms for electricity technology competitiveness metrics and show how the mathematical relationship between value and cost can affect the robustness of the metric. Here, we make the case to replace established metrics with economic profitability metrics – including a new profitability-based adjustment to LCOE. These profitability metrics are shown to be more robust for evaluating technology competitiveness by keeping comparisons on an equivalent monetary basis.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗