Search NASA⌕ Search

SEARCH · Search NASA

Results for “Entry Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The utilization of Shuttle launched vehicles for technical validation of advanced earth and planetary entry systems

Studies of future space missions have shown that transport vehicles which utilize passage (aeroassisted) through the atmosphere of the earth or an appropriate planet have a substantial payload advantage over earlier concepts which used retro propulsion to effect the transition to local orbit. A description is presented of aeroassisted concepts currently under consideration for application to NASA's advanced space entry missions. Proposed aeroassisted planetary orbit entry vehicles are considered, taking into account the aerobrake concept, the aerocapture concept, proposed aeroassisted earth orbit entry vehicles, the application of Shuttle launched research vehicles to aerobrake and aerocapture technology validation, Shuttle launched vehicle options, flight trajectory options, and trajectory termination options.

Jamison, C. C.↗
NASA NTRS2009

Structural and Trajectory Control of Variable Geometry Planetary Entry Systems

The results presented in this paper apply to a generic vehicle entering a planetary atmosphere which makes use of a variable geometry change to modulate the heat, drag, and acceleration loads. Two structural concepts for implementing the cone angle variation, namely a segmented shell and a corrugated shell, are presented. A structural analysis of these proposed structural configuration shows that the stress levels are tolerable during entry. The analytic expressions of the longitudinal aerodynamic coefficients are also derived, and guidance laws that track reference heat flux, drag, and aerodynamic acceleration loads are also proposed. These guidance laws have been tested in an integrated simulation environment, and the results indicate that use of variable geometry is feasible to track specific profiles of dynamic load conditions during reentry.

decelerator↗
NASA NTRS2009

Structural and Control Concepts for Variable Geometry Planetary Entry Systems

The results presented in this paper apply to a generic vehicle entering a planetary atmosphere which makes use of a variable geometry change to modulate the heat, drag, and acceleration loads. Two structural concepts for implementing the cone angle variation, namely a segmented shell and a corrugated shell, are presented. A structural analysis of these proposed structural configuration shows that the stress levels are tolerable during entry. The analytic expressions of the longitudinal aerodynamic coefficients are also derived, and guidance laws that track reference heat flux, drag, and aerodynamic acceleration loads are also proposed. These guidance laws have been tested in an integrated simulation environment, and the results indicate that use of variable geometry is feasible to track specific profiles of dynamic load conditions during reentry.

decelerators↗
NASA NTRS2015

Development Challenges of Game-Changing Entry System Technologies from Concept to Mission Infusion

Realization within the US and NASA that future exploration both Human and Robotic will require innovative new technologies led to the creation of the Space Technology Mission Directorate and investment in game changing technologies with high pay-off. Some of these investments will see success and others, due to many of the constraints, will not attain their goal. The co-authors of this proposed presentation have been involved from concept to mission infusion aspects of entry technologies that are game changing. The four example technologies used to describe the challenges experienced along the pathways to success are at different levels of maturity. They are Conformal, 3-D MAT, HEEET and ADEPT. The four examples in many ways capture broad aspects of the challenges of maturation and illustrate what led some to be exceptionally successful and how others had to be altered in order remain viable game changing technologies. Subsystem technologies for robotic and human missions

TPS↗
NASA NTRS2016

Development Challenges of Game-Changing Entry System Technologies From Concept to Mission Infusion

Realization within the US and NASA that future exploration both Human and Robotic will require innovative new technologies led to the creation of the Space Technology Mission Directorate and investment in game changing technologies with high pay-off. Some of these investments will see success and others, due to many of the constraints, will not attain their goal. The co-authors of this proposed presentation have been involved from concept to mission infusion aspects of entry technologies that are game changing. The four example technologies used to describe the challenges experienced along the pathways to success are at different levels of maturity. They are Conformal, 3-D MAT, HEEET and ADEPT. The four examples in many ways capture broad aspects of the challenges of maturation and illustrate what led some to be exceptionally successful and how others had to be altered in order remain viable game changing technologies.

Technology↗
NASA NTRSDate not supplied

Overview of Mars Sample Return – Earth Entry System Woven Roughness Heating Augmentation Test in NASA Langley’s Mach 6 Wind Tunnel

The Mars Sample Return Mission (MSR) is a planned NASA flagship mission in which a sample retrieval lander (SRL) with a rover will be flown to Mars to obtain sample tubes on the surface that were dropped by the Mars 2020 rover [1]. After obtaining the sam-ples, the rover will return and ascend back to Martian orbit onboard the Mars Ascent Vehicle (MAV). Upon return to Earth orbit, the samples will perform Entry, Descent, and Landing (EDL) with the Earth Entry Sys-tem (EES) architecture, and land in Utah. The EES vehicle will utilize a HEEET-variant as its TPS, which will be the first time a woven TPS will be used on a flagship NASA mission [2]. This TPS offers a unique challenge for Computational Fluid Dynamics (CFD) modeling of the aerothermal envi-ronment of the vehicle, as woven roughness heating augmentation has not been extensively investigated experimentally. As a result, in order to validate com-putational models for woven roughness heating aug-mentation, a wind tunnel test campaign at NASA Langley Research Center’s Mach 6 wind tunnel was performed in April of 2023. This test campaign consisted of over a hundred runs with Reynolds numbers spanning from 1-7 mil-lion 1/ft and with six separate wind tunnel models used. A second campaign with a suite of new models will be conducted in Summer 2023 as well as a cam-paign with a flat plate model, both of which are of great interest to the MSR-EES project. The data obtained from this test are extremely vital for the MSR mission, as they will validate CFD roughness heating models which will be directly used to design the TPS of the EES portion of MSR and characterize the heating environment that the entry ve-hicle will experience. Further extensions of the MSR-EES test campaign will continue to provide validation data for developing more effective computational tools.

Jonathan Cheatwood↗
NASA NTRS1993

Entry Systems Panel

As general findings, lessons learned from shuttle are: (1) bridge established between development center (JSC) Research Centers (ARC, LARC), and industry (RI, LMSC, Corning, Mansville, 3M LTV, Union Carbide, Hexcel) for shuttle TPS; (2) not all test results adequately analyzed or in hindsight, completely encompassing all failure modes; (3) gap heating effects from ground facilities not totally indicative of flight experience; (4) need to design with operations in mind (not just to cost) example: moisture intrusion of GR/EP, many other examples; (5) RSI- developed as point design for maneuvering entry vehicle of high L/D; and (6) RSI - 15 years from invention to use on flight hardware.

Rasky, Daniel J.↗
NASA NTRS1993

Flexible thermal protection materials for entry systems

Current programs addressed in aeroassist flight experiment are: (1) evaluation of thermal performance of advanced rigid and flexible insulations and reflective coating; (2) investigation of lighter than baseline materials; (3) investigation of rigid insulations which perform well; (4) study of flexible insulations which require ceramic coating; and (5) study of reflective coating effective at greater than 15 percent. In National Aerospace Plane (NASP), the programs addressed are: (1) high and low temperature insulations; and (2) attachment/standoff methodology critical which affects thermal performance.

Kourtides, Demetrius A.↗
NASA NTRS1993

Rigid fibrous ceramics for entry systems

The topics addressed are: (1) high payoff areas with reusable surface insulation; (2) technology opportunities/gap; (3) coatings for rigid fibrous ceramics; (4) challenges for reusable rigid fibrous ceramics - Lunar/Mars aerobraking heatshield; (5) comparison of LI-900 and HTP properties; and (6) comparison of microstructures.

Banas, Ronald P.↗
NASA NTRS1993

Entry systems technology assessment

The objectives are: (1) to establish aerothermal environments for hypersonic aerospace vehicles; (2) to develop thermostructural design concepts; (3) to obtain optimum thermostructural designs by performing trade studies; and (4) to identify areas for further development.

Gay, Archie↗
NASA NTRS2016

Coatings and Surface Treatments for Reusable Entry Systems

This talk outlines work in coatings for TPS done at NASA Ames. coatings and surface treatments on reusable TPS are critical for controlling the behavior of the materials. coatings discussed include RCG, TUFI and HETC. TUFROc is also discussed.

coatings↗
NASA NTRS2015

Tactile Data Entry System

The patent-pending Glove-Enabled Computer Operations (GECO) design leverages extravehicular activity (EVA) glove design features as platforms for instrumentation and tactile feedback, enabling the gloves to function as human-computer interface devices. Flexible sensors in each finger enable control inputs that can be mapped to any number of functions (e.g., a mouse click, a keyboard strike, or a button press). Tracking of hand motion is interpreted alternatively as movement of a mouse (change in cursor position on a graphical user interface) or a change in hand position on a virtual keyboard. Programmable vibro-tactile actuators aligned with each finger enrich the interface by creating the haptic sensations associated with control inputs, such as recoil of a button press.

Adams, Richard J.↗
NASA NTRS2015

An Overview of Technology Investments in the NASA Entry Systems Modeling Project

ESM was created with two primary technical areas: Aerosciences and Materials. One of the first project deliverables, in both technology areas, was the development of Key Performance Parameters (KPPs), which are used to gauge the rate of progress in technology maturation, and to inform eventual technology downselects. In addition, the project was tasked to identify stakeholders or customers for proposed technology investments. While pull technologies are permitted within STMD, those capabilities that have strong customer support and a clear infusion plan are given higher priority. The current investment portfolio and achievements will be summarized in this paper.

Wright, Michael J.↗
NASA NTRSDate not supplied

TPS and Entry Systems Technologies for Future Mars and Titan Exploration

During the past twenty years, NASA effectively erased earlier Mars mishaps with six successful missions to the Red Planet. These missions delivered one orbiter and five payloads to the surface. Those payloads included three rovers, Spirit (2004) which roamed 11 years, Opportunity (2004) which roamed nearly 15 years, and Curiosity (2012) which is in its ninth year, along with two landers, Phoenix (2008) and InSIGHT (2018). In July, the Mars 2020 mission will send another large rover, Perseverance, which will land in 2021. The InSIGHT mission even demonstrated the capability to send CubeSats along to help with communication back to the surface. NASA has demonstrated the capability to land a metric ton of vehicles plus science instruments on Mars and expects that the same technologies will be equally successful landing Dragonfly on Titan in the 2030’s. The thermal protection systems (TPS) used on the Mars missions are sufficiently developed and matured to continue furthering science on both Mars and Titan, assuming that the TPS materials are sustained by industry. The purpose of this white paper is to encourage further exploration and science on both Mars and Titan because we have the technologies to support them. In addition, we will look forward to human exploration of Mars and identify the improvements in TPS materials required to facilitate landing the larger payloads.

Thermal Protection Systems↗