Search NASA⌕ Search

SEARCH · Search NASA

Results for “Ethanol Yield”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Assessing feasible H2–CO2 sources in the US as Feedstocks for Sustainable Aviation Fuel Precursors: Acetic Acid and Ethanol Production via Hydrogenotrophic Pathways

The environmental impact of carbon dioxide emissions is significant, and research is focused on mitigating these emissions and developing eco-friendly technologies in line with green chemistry principles. Waste-to-energy technologies play a crucial role in converting waste into renewable energy and valuable biofuels and bioproducts. This study specifically explores the utilization of waste gas emissions, particularly carbon dioxide, from various sources in the United States for the production of sustainable aviation fuel (SAF) precursors, such as ethanol and acetic acid. The study categorizes and quantifies the volumes of carbon dioxide emissions into three types: non-biogenic, biogenic, and biogenic emissions from ethanol production facilities. Stoichiometric calculations are applied to compare the amounts of carbon dioxide from each category with the available hydrogen production capacity, determining if sufficient hydrogen is present for converting carbon dioxide into SAF precursors. The study reveals two key findings. Firstly, there is a significant reserve of carbon dioxide, approximately 1648 million metric tons per year (MMTy), combining all three categories, which would require a substantial increase of approximately 35–40 times in the existing hydrogen production capacity of 4.988 MMTy. This increased hydrogen production has the potential to yield approximately 1067.82 MMTy of acetic acid and 189.19 MMTy of ethanol annually. Secondly, upon analyzing the quality and application of the three sources of carbon dioxide with the currently available hydrogen production capacity, it is found that biogenic carbon dioxide from ethanol plants is the most suitable choice for immediate production of SAF precursors. This would theoretically result in an annual production of 1.36 MMTy of ethanol and 1.772 MMTy of acetic acid. The other two sources of carbon dioxide can be considered potential reserves for future utilization when additional hydrogen production facilities are established. The study provides a foundation for assessing the aggregation potential required for acetic acid and ethanol production. By optimizing the use of waste gases as raw materials, the study not only enables the production of SAF precursors but also contributes to the passive reduction of greenhouse gas emissions.

Carbon Dioxide↗
DOE OSTI2021

Cellulosic biofuel production using emulsified simultaneous saccharification and fermentation (eSSF) with conventional and thermotolerant yeasts

Abstract Background Future expansion of corn-derived ethanol raises concerns of sustainability and competition with the food industry. Therefore, cellulosic biofuels derived from agricultural waste and dedicated energy crops are necessary. To date, slow and incomplete saccharification as well as high enzyme costs have hindered the economic viability of cellulosic biofuels, and while approaches like simultaneous saccharification and fermentation (SSF) and the use of thermotolerant microorganisms can enhance production, further improvements are needed. Cellulosic emulsions have been shown to enhance saccharification by increasing enzyme contact with cellulose fibers. In this study, we use these emulsions to develop an emulsified SSF (eSSF) process for rapid and efficient cellulosic biofuel production and make a direct three-way comparison of ethanol production between S. cerevisiae , O. polymorpha , and K. marxianus in glucose and cellulosic media at different temperatures. Results In this work, we show that cellulosic emulsions hydrolyze rapidly at temperatures tolerable to yeast, reaching up to 40-fold higher conversion in the first hour compared to microcrystalline cellulose (MCC). To evaluate suitable conditions for the eSSF process, we explored the upper temperature limits for the thermotolerant yeasts Kluyveromyces marxianus and Ogataea polymorpha , as well as Saccharomyces cerevisiae , and observed robust fermentation at up to 46, 50, and 42 °C for each yeast, respectively. We show that the eSSF process reaches high ethanol titers in short processing times, and produces close to theoretical yields at temperatures as low as 30 °C. Finally, we demonstrate the transferability of the eSSF technology to other products by producing the advanced biofuel isobutanol in a light-controlled eSSF using optogenetic regulators, resulting in up to fourfold higher titers relative to MCC SSF. Conclusions The eSSF process addresses the main challenges of cellulosic biofuel production by increasing saccharification rate at temperatures tolerable to yeast. The rapid hydrolysis of these emulsions at low temperatures permits fermentation using non-thermotolerant yeasts, short processing times, low enzyme loads, and makes it possible to extend the process to chemicals other than ethanol, such as isobutanol. This transferability establishes the eSSF process as a platform for the sustainable production of biofuels and chemicals as a whole.

09 BIOMASS FUELS↗
DOE OSTI2022

Life-cycle greenhouse gas emissions reduction potential for corn ethanol refining in the USA

This study evaluates how low-carbon production technologies applicable to ethanol plants may reduce the life-cycle greenhouse gas emission (GHG) intensities of corn ethanol production in the USA. Results indicate that options focusing on incremental energy efficiency (e.g., combined heat and power) and yield improvements have a limited impact on GHG reductions. To achieve deep decarbonization (>50% GHG reduction compared to current corn ethanol production), a fuel switch from natural gas (NG) to alternative low-carbon fuels is needed. Replacing 50% of NG demand at ethanol plants with syngas from biomass through gasification or renewable natural gas from animal waste could achieve significant GHG reductions (11.7–23.5 g CO 2 e/MJ ethanol). Adding multiple technologies, including carbon capture and storage, to existing ethanol plants may further reduce GHG emissions to –18.4 g CO 2 e MJ –1 ethanol (including land-use change emissions), which is 120% lower than the carbon intensity of pure gasoline. These results could inform how the ethanol industry could move toward net-zero ethanol production.

09 BIOMASS FUELS↗
DOE OSTI2024

Carbonate Management to Enable Energy- and Carbon-Efficient CO 2 Electrolysis (Final Technical Report)

The rapid growth and plummeting cost of solar energy have created great interest in using CO 2 electrolysis to produce chemical feedstocks and fuels such as carbon monoxide, ethylene, ethanol, and propanol. While research in CO 2 electrolysis has yielded substantial progress in both fundamental understanding of the requisite electrocatalytic reactions and design of prototype devices, the energy efficiency (electrical energy to-product) and carbon efficiency (CO 2 -to-product) of CO 2 electrolysis remain far too low for large-scale deployment. A preponderance of evidence indicates that the principal reason for these low efficiencies is the rapid and thermodynamically favorable reaction of CO 2 with hydroxide (OH–) to form carbonate , which forces CO 2 electrolysis cells to operate under conditions that result in large voltage and CO 2 losses. This “CO 3 2 – problem” presents a fundamental scientific barrier to creating a viable electrochemical option for converting solar energy into chemicals and fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Engineering Clostridium cellulovorans for highly selective n ‐butanol production from cellulose in consolidated bioprocessing

Abstract Cellulosic n ‐butanol from renewable lignocellulosic biomass has gained increased interest. Previously, we have engineered Clostridium cellulovorans , a cellulolytic acidogen, to overexpress the bifunctional butyraldehyde/butanol dehydrogenase gene adh E2 from C. acetobutylicum for n ‐butanol production from crystalline cellulose. However, butanol production by this engineered strain had a relatively low yield of approximately 0.22 g/g cellulose due to the coproduction of ethanol and acids. We hypothesized that strengthening the carbon flux through the central butyryl‐CoA biosynthesis pathway and increasing intracellular NADH availability in C. cellulovorans adh E2 would enhance n ‐butanol production. In this study, thiolase ( thl A CA ) from C. acetobutylicum and 3‐hydroxybutyryl‐CoA dehydrogenase ( hbd CT ) from C. tyrobutyricum were overexpressed in C. cellulovorans adh E2 to increase the flux from acetyl‐CoA to butyryl‐CoA. In addition, ferredoxin‐NAD(P) + oxidoreductase ( fnr ), which can regenerate the intracellular NAD(P)H and thus increase butanol biosynthesis, was also overexpressed. Metabolic flux analyses showed that mutants overexpressing these genes had a significantly increased carbon flux toward butyryl‐CoA, which resulted in increased production of butyrate and butanol. The addition of methyl viologen as an electron carrier in batch fermentation further directed more carbon flux towards n ‐butanol biosynthesis due to increased reducing equivalent or NADH. The engineered strain C. cellulovorans adh E2‐ fnr CA ‐ thl A CA ‐ hbd CT produced n ‐butanol from cellulose at a 50% higher yield (0.34 g/g), the highest ever obtained in batch fermentation by any known bacterial strain. The engineered C. cellulovorans is thus a promising host for n ‐butanol production from cellulosic biomass in consolidated bioprocessing.

Bao, Teng↗
DOE OSTI2022

The Ethanol–Ethyl Acetate System as a Biogenic Hydrogen Carrier

Liquid organic hydrogen carriers will likely be a key element of a future hydrogen economy by enabling the storage and transport of large quantities of hydrogen. Ethanol is a liquid organic hydrogen carrier that is readily available from biological resources, which undergoes a reversible reaction to yield hydrogen and ethyl acetate. The objective of the present study is to obtain a better understanding of the thermodynamic and environmental suitability of the ethanol–ethyl acetate cycle for hydrogen storage applications. The analysis covers three aspects: thermodynamics of the chemical reaction, energy balance of the process, and a first‐order assessment of greenhouse gas emissions. Thermodynamics of the reaction are characterized by a standard Gibbs energy of reaction close to zero which allows the reaction to be shifted between hydrogenation and dehydrogenation within a moderate window of temperature and pressure conditions. The energy demand for dehydrogenation is comparatively small, resulting in an overall system efficiency of 88%. A life cycle greenhouse gas analysis over a 20‐year storage system lifetime gives a carbon intensity of 7.0 kg‐CO 2eq /kg‐H 2 delivered. These results indicate that the ethanol–ethyl acetate system has considerable promise as a hydrogen carrier and should be the subject of further research.

08 HYDROGEN↗
DOE OSTI2024

Trickier than It Looks: Isomerization between Five- and Six-Coordinated Zinc in Heterometallic Li 2 Zn 2 Molecule

This report describes the synthesis and characterization of two hetero bi metallic Li–Zn coordination isomers [Li 2 Zn 2 (tbaoac) 6 ] (tbaoac = tert -butyl acetoacetato) that have been isolated separately by the same stoichiometric reaction run in different organic solvents. The 6-coordinated zinc isomer ( 6-Zn ) was synthesized in acetone with high yield, while the 5-coordinated one ( 5-Zn ) was readily obtained from ethanol. The 5-Zn isomer has a low solubility in organic solvents such as alkanes and haloalkanes, while its 6-Zn counterpart exhibits a good solubility in almost all common solvents. Two isomeric molecules feature similar centrosymmetric tetranuclear cyclic assemblies, which are different in their arrangement of tbaoac ligands. While all ligands act as μ 2 -type in the structure of 5-Zn , the two tbaoac groups chelating Li appear as μ 3 -type in 6-Zn , thus providing an additional coordination for Zn ions. However, the real structural transformation between these isomers was shown to be more complex than simply making or breaking a couple of Zn–O bonds. X-ray single-crystal structure analysis, powder X-ray diffraction, multinuclear NMR, DART mass spectrometry, ICP-OES analysis, and TGA have been employed for the characterization of the isomers. The combination of powder X-ray diffraction and 1 H NMR investigation revealed that 6-Zn isomer can be quantitatively transformed to 5-Zn in ethanol, while the reverse conversion instantly takes place in acetone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Production of 1,3-Butadiene from Renewable Feedstocks Ethanol and 1,3-Butanediol - CRADA 560 (Final Report)

1,3-butadiene is a commodity chemical currently produced from petroleum sources. Producing 1,3-butadiene from renewable resources will contribute to decarbonization, provide new green jobs, and reduce our dependance on oil. Development of multifunctional catalysts that are active, selective, and stable for this reaction has been an area of research and development. This effort reported here builds on our prior work for the 1-step conversion of ethanol to butadiene. The goal of the additional scope performed here was to accelerate the commercial deployment of sustainable butadiene production. We demonstrated that the PNNL Ag-based catalyst is significantly more active than the WWII-era catalyst when operated under the same conditions. A butadiene selectivity of 68% was obtained at 64% conversion for the production of butadiene from ethanol. It was found that ethanol feedstock is preferred over 1,3-butanediol feedstock to produce butadiene due to higher yield resulting in lower butadiene selling price (i.e., $\$$0.4-1.7/ lb). Production of 3.0 Liter of butadiene solution in hexane containing 100 grams of butadiene was achieved and delivered to Bridgestone for producing a butadiene-derived test piece.

09 BIOMASS FUELS↗
DOE OSTI2020

Autoignition behavior of gasoline/ethanol blends at engine-relevant conditions

Ethanol is an attractive oxygenate increasingly used for blending with petroleum-derived gasoline yielding beneficial combustion and emissions behavior for a range of internal combustion engine schemes, including stoichiometric spark-ignition and low temperature combustion (LTC). As such, it is important to fundamentally understand the autoignition behavior of gasoline/ethanol blends. This work utilizes a rapid compression machine (RCM) and a homogeneous charge compression ignition (HCCI) engine to experimentally quantify changes in fuel reactivity, through ignition delay times and preliminary heat release, for blends of 0 to 30% vol./vol. into a full boiling range research gasoline (FACE-F). Diluted/stoichiometric and undiluted/fuel-lean conditions are explored covering a wide range of compressed temperatures and pressures relevant to conventional and advanced, gasoline combustion engines. Detailed chemical kinetic modeling is undertaken using a recently updated gasoline surrogate model in conjunction with a five-component surrogate to model the RCM experiments and provide chemical insight into the perturbative effects of ethanol on the autoignition process. The diluted/stoichiometric RCM measurements reveal that within the low-temperature regime ethanol retards first-stage and main ignition delay times, and suppresses both the rates and extents of low-temperature heat release (LTHR), while within the intermediate-temperature regime ethanol only causes slight changes. Good agreement of ignition delay time and preliminary heat release prediction is found between model and experimental results. Sensitivity and flux analyses further show that ethanol blending effects are dominated by the competition between the H-atom abstraction from ethanol and other fuel components by OH radical at low temperatures and by HO 2 radical at intermediate temperatures. These findings are consistent across both fuel loading conditions explored in this study. In addition, when HCCI engine experiments are mapped onto undiluted/lean RCM measurements under a constant combustion phasing scenario, good correspondence between the two apparatuses is observed for LTHR and start of high-temperature heat release. Finally, the current study highlights the importance of characterizing LTHR in predicting fuel behaviors in high-boost/low-temperature engines, and demonstrates that RCM experiments can provide an alternative, and more-efficient avenue for such characterization.

02 PETROLEUM↗
DOE OSTI2023

Probing the Behavior of Composition‐Tunable Ultrathin PtNi Nanowires for CO Oxidation and Small‐Molecule Electrocatalytic Reactions

We have successfully synthesized ultrathin nanowires of pure Pt, Pt 99 Ni 1 , Pt 9 Ni 1 , and Pt 7 Ni 3 using a modified room-temperature soft-template method. Analysis of both methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR) results found that the Pt 7 Ni 3 samples yielded the best performance with specific activities of 0.36 and 0.34 mA/cm 2 respectively. Additionally, formic acid oxidation reaction (FAOR) tests noted that both Pt and PtNi nanowires oxidize small organic molecules (SOMs) via an indirect pathway. CO oxidation data suggests little measurable performance without any pre-reduction treatment; however, after annealing in H 2 , we detected significantly improved CO 2 formation for both Pt 9 Ni 1 and Pt 7 Ni 3 motifs. These observations highlight the importance of pre-treating these nanowires under a reducing atmosphere to enhance their performance for CO oxidation. To explain these findings, we collected extended x-ray adsorption fine structure (EXAFS) spectroscopy data, consistent with the presence of partial alloying with a tendency for Pt and Ni to segregate, thereby implying the formation of a Pt-rich shell coupled with a Ni-rich core. Here, we also observed that the degree of alloying within the nanowires increased after annealing in a reducing atmosphere, a finding deduced through analysis of the coordination numbers and calculations of Cowley's short range order parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Carbonate Management to Enable Energy- and Carbon-Efficient CO 2 Electrolysis (Final Technical Report)

The rapid growth and plummeting cost of solar energy have spurred growing interest in using CO 2 electrolysis to produce chemicals and fuels as an alternative to conventional petrochemical processes. High-temperature (>800 °C) solid oxide electrolyzers that convert CO 2 into CO and O 2 have recently become commercially available. Low-temperature electrolysis cells offer the prospect of more convenient and flexible operation, which is critical for utilizing intermittent solar energy, and provide access to more valuable C 2+ products such as ethylene, ethanol, and propanol. Over the past 10 years, research in this area has yielded substantial progress in both fundamental understanding of the requisite electrocatalytic reactions and design of prototype devices. Leveraging insights from fuel cells and membrane water electrolyzers, researchers have developed electrolysis cells with gas diffusion electrodes (GDE) that have demonstrated high CO 2 electrolysis current densities (>100 mA cm –2 ) as well as promising selectivity and stability. Despite these advances, the energy efficiency (electrical energy-to-product) and carbon efficiency (CO 2 -to-product) of low-temperature CO 2 electrolysis remain far too low for large-scale deployment. A preponderance of evidence indicates that the principal source of efficiency losses is the rapid and thermodynamically favorable reaction of CO 2 with hydroxide (OH – ) to form carbonate (CO 3 2– ). Carbonate formation imposes steady-state electrolysis conditions that result in large voltage and CO 2 losses for all known (photo)electrochemical CO 2 cells. While much current research remains focused on CO 2 reduction catalyst design, this largely overlooked CO 3 2– problem presents a fundamental scientific barrier to creating a viable electrochemical option for converting solar energy into chemicals and fuels. The project pursues an integrated, multi-PI research effort that establishes a fundamental science of CO 3 2– management. PI Kanan and Co-PI Mani’s contribution to the project is to evaluate strategies to mitigate the CO 3 2– problem by changing the properties of the electrolyte and the environment in which CO 2 reduction catalysis takes place. Experimental studies showed that electrolytes composed of a high concentration of both CO 3 2– and HCO 3 – , which serve as moderately alkaline buffers, improved the cell voltage by compared to all-HCO 3 – electrolytes, but these buffered systems still show substantial CO 2 uptake that reduces pH over time. Computational studies developed a homogenized model of a CO 2 reduction catalyst layer that permits a low-cost exploration of the high-dimensional parameter space associated with catalyst layers on gas diffusion electrodes. The model was validated by accurately reproducing experimental data for the related but simpler reaction of CO reduction and then used to probe the effects of catalyst layer architecture on CO 2 reduction. Minimizing the size of catalyst and hydrophobic domains in the catalyst layer is predicted to mitigate CO 3 2– formation and thereby enable prolonged operation at elevated pH. In support of the CO 2 electrolysis studies, a new method for rapidly prototyping electrochemical cells was developed and validated. The method uses a combination of 3D printing and electroless plating to generate conductive cell components for evaluating new cell designs. The carbonate problem encompasses mass transport processes and acid-base reactions that are relevant to many other electrochemical systems. Investigation of strategies to address the carbonate problem led to an additional line of inquiry into the physicochemical phenomena that determine the efficiency of electrochemical acid-base production, which has numerous applications in the broader field of carbon management. New strategies for using the supporting electrolyte to inhibit H + /OH – recombination in electrochemical acid-base production were evaluated, leading to the development of a novel acid-base producing system that eliminates the need for ion exchange membranes and exhibits promising efficiency and current densities for scalable applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Rewiring cell-free metabolic flux in E. coli lysates using a block—push—pull approach

Abstract Cell-free systems can expedite the design and implementation of biomanufacturing processes by bypassing troublesome requirements associated with the use of live cells. In particular, the lack of survival objectives and the open nature of cell-free reactions afford engineering approaches that allow purposeful direction of metabolic flux. The use of lysate-based systems to produce desired small molecules can result in competitive titers and productivities when compared to their cell-based counterparts. However, pathway crosstalk within endogenous lysate metabolism can compromise conversion yields by diverting carbon flow away from desired products. Here, the ‘block—push—pull’ concept of conventional cell-based metabolic engineering was adapted to develop a cell-free approach that efficiently directs carbon flow in lysates from glucose and toward endogenous ethanol synthesis. The approach is readily adaptable, is relatively rapid and allows for the manipulation of central metabolism in cell extracts. In implementing this approach, a block strategy is first optimized, enabling selective enzyme removal from the lysate to the point of eliminating by-product-forming activity while channeling flux through the target pathway. This is complemented with cell-free metabolic engineering methods that manipulate the lysate proteome and reaction environment to push through bottlenecks and pull flux toward ethanol. The approach incorporating these block, push and pull strategies maximized the glucose-to-ethanol conversion in an Escherichia coli lysate that initially had low ethanologenic potential. A 10-fold improvement in the percent yield is demonstrated. To our knowledge, this is the first report of successfully rewiring lysate carbon flux without source strain optimization and completely transforming the consumed input substrate to a desired output product in a lysate-based, cell-free system.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Rapid recovery of At-211 by extraction chromatography

The near quantitative separation, purification, and recovery of 211 At has been demonstrated through an extraction chromatography process which utilizes porous beads impregnated with 3-octanone, resulting in an elution yield of 92–95%. Moreover, the rapid nature of this process, <20 min, was achieved after dissolution of a Bi metal target in HNO 3 following retrieval from the beamline after α-particle bombardment. The solution was directly loaded onto the column with no volume or acidity adjustment. The column was washed with HNO 3 and H 2 O, and 211 At was eluted with ethanol, collecting roughly 87–93% in 1 mL. This process of recovering high purity 211 At, in near quantitative yields, represents a significant advance in At separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Uncovering the active sites and demonstrating stable catalyst for the cost-effective conversion of ethanol to 1-butanol

We report the recent emergence of a robust renewable ethanol industry has provided a sustainable platform molecule toward the production of value-added chemicals and fuels; what is lacking now are viable conversion processes from ethanol that can displace the current production pathways from non-renewable pathways. Here in the work, we demonstrate the highly selective conversion of ethanol to higher alcohols over low copper loaded MgAl mixed oxide catalysts, with 50% improvement in higher alcohol yields over the current state of the art. At these copper concentrations, atomically dispersed Cu +1 were found to be stable even at highly reductive conditions and highly active towards higher alcohol products (e.g. butanol, hexanol) while suppressing side reaction pathways and leading to extended lifetimes of over 150 hours time on stream. Technoeconomic analysis conducted based on these experimental results demonstrate that this catalytic system is cost-competitive with the conventional process. This marks significant progress in the development of Guerbet coupling of ethanol as a viable renewable process and offers a pathway toward sustainable chemical and fuel production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Ethanol Conversion to C 4+ Olefins over Bimetallic Copper- And Lanthanum-Containing Beta Zeolite Catalysts

We report ethanol conversion to C 4+ olefins remains a critical yet nonselective process for producing renewable middle distillates. Here, Cu–La/Beta catalysts composed of copper and lanthanum incorporated onto a dealuminated Beta support are reported for ethanol conversion to C 4+ olefins (73% selectivity, ~98% ethanol conversion, 623 K,<4% C 1 –C 3 hydrocarbons) which particularly favors C 5+ olefin formation (43% selectivity) as a distinction from the benchmarking Cu–Y/Beta catalyst. Monometallic Cu/Beta or La/Beta samples are insufficient to catalyze the C 4+ olefin formation and primarily form dehydration products (e.g., ethylene and diethyl ether), indicating the necessity of both Cu and La species for butene and C 5+ olefin formation. Increasing the bulk La loading at a fixed Cu content yields higher C 5+ olefins until the La/Cu molar ratio reaches 3.6. These findings indicate Cu–La/Beta as an effective ethanol conversion catalyst that facilitates multiple C–C bond formation events required for synthesizing C 5+ olefins (i.e., hexenes and octenes).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Highly Selective Electrolytic Reduction of CO 2 to Ethylene

We investigate the reduction of CO 2 to ethylene across buffered anolyte pH values 4 to 14 using a copper–phosphorus (Cu–P) electrocatalyst in a zero-gap membrane electrode assembly. Electrochemical CO 2 reduction using alkaline electrolytes typically shows limited carbon efficiencies and single-pass efficiencies, while acidic conditions typically favor the hydrogen evolution reaction. Results from this work show that weakly phosphate-buffered acidic anolytes (pH 6) maximize ethylene production with a 73% FE at 300 mA cm –2 and 51% FE at 500 mA cm –2 , including a 51% single-pass CO 2 conversion efficiency for over 400 h of continuous operation. We propose a mechanism based on pH-dependent CO coverage that controls the selectivity at the *HCCOH intermediate. Low CO coverage at pH 6 favors hydroxide elimination to *CCH, yielding ethylene (98% of C 2 products), while high coverage at pH 14 promotes hydrogenation to ethanol (44% of C 2 ). The HER mechanism transitions from H 2 O-mediated at pH 14 to phosphate-mediated (H 2 PO 4 – /HPO 4 2– ) at weakly acidic pH, minimizing HER competition at pH 6. This mechanistic understanding enables controlled C 2 product selectivity through manipulation of the CO coverage and local proton activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Isobutanol production freed from biological limits using synthetic biochemistry

Cost competitive conversion of biomass-derived sugars into biofuel will require high yields, high volumetric productivities and high titers. Suitable production parameters are hard to achieve in cell-based systems because of the need to maintain life processes. As a result, next-generation biofuel production in engineered microbes has yet to match the stringent cost targets set by petroleum fuels. Removing the constraints imposed by having to maintain cell viability might facilitate improved production metrics. Here, we report a cell-free system in a bioreactor with continuous product removal that produces isobutanol from glucose at a maximum productivity of 4 g L –1 h –1 , a titer of 275 g L –1 and 95% yield over the course of nearly 5 days. These production metrics exceed even the highly developed ethanol fermentation process. Our results suggest that moving beyond cells has the potential to expand what is possible for bio-based chemical production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗