SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Epitaxial oxide thin films enable electrocatalyst design, e.g. for the oxygen evolution reaction, based on atomic-level structure–property–functionality relationships.
Ni–P films that are catalytically active for the hydrogen-evolution reaction were electrodeposited onto photoactive Si substrates between 20 °C and 80 °C from an aqueous solution. Ni–P films deposited at 20 °C and exposed to acidic environments spontaneously developed deep cracks. A substantial increase in optical transmission to the semiconducting substrate resulted without affecting the catalytic performance of the film. In contrast, Ni–P films deposited at 80 °C only developed minor surface-level cracks and did not exhibit a substantial increase in optical transmission. During electrodeposition of the Ni–P films at low temperatures, the uptake of parasitically evolved hydrogen generated partially defective Ni–P, causing crack formation. Increases in the temperature of the electrodeposition bath increased the faradaic efficiency of Ni–P deposition and consequently reduced the uptake of parasitically generated hydrogen. The defective Ni–P films were converted to a crack-resistant material by thermally desorbing the excess hydrogen that was absorbed during the low-temperature electrodeposition process.
The effect of anion exchange ionomer (AEI) chemistry on the kinetics of the oxygen evolution reaction (OER) was systematically studied in both half-cell and single-cell electrolysis experiments. OER was studied in 1 M K 2 CO 3 at 50°C using an array of ionomer-silver catalyst inks deposited on Ni foam. Different ionomer modifications were investigated to optimize the OER performance. The AEI used in this work features a block copolymer backbone of polychloromethylstyrene-b-polycyclooctene-b-polychloromethylstyrene which was functionalized with either benzyltrimethylammonium (TMA) or benzylmethylpiperidinium (MPRD) quaternary ammonium cations. Here, using an MPRD quaternary ammonium cation shifted the rate determining step at high overpotentials, ultimately providing enhanced performance. Increasing the catalyst ink dilution was also found to substantially improve mass activity and catalyst utilization (increase from 35 to 88 A g –1 Ag), likely by reducing the ionomer thickness and decreasing transport resistances. In the final ionomer modification, the Ni foam substrate was leveraged to partially hydrogenate the polycyclooctene midblock to be polyethylene-like at the Ni interface. A significant increase in the electrochemical surface area (Cdl increased from 8.8 to 20.8 mF cm –2 ) and performance (by 47 mA cm –2 or 29 A g –1 Ag) was observed with the incorporation of polyethylene. Kinetic results from half-cell experiments were validated via single-cell anion exchange membrane electrolysis experiments, where the optimized electrode displayed enhanced performance in both 1 M K 2 CO 3 and DI H 2 O.
Hydrogen energy derived from water splitting is the cleanest renewable energy source, but it is also very challenging to achieve because the hydrogen evolution reaction (HER) requires highly efficient and low-cost electrocatalysts. Here, we have fabricated a novel hierarchical system of amorphous molybdenum oxy/sulfide microspheres with crystalline Ni 3 S 2 intergrown in situ on Ni foam (MoO x S y /Ni 3 S 2 /NF) as an outstanding electrocatalyst for HER. The MoO x S y /Ni 3 S 2 /NF demonstrates an ultra-low overpotential of 58 mV at a current density of 10 mA cm -2 and extremely durable stability (>200 h), suggesting superior performance comparable to that of Pt-C/NF under acidic conditions. The X-ray absorption fine structure (XAFS) determines the average valence state of Mo to be +(5 + δ), with a coordination motif by O and S. To explain such high HER activity, a [Mo 2 O 2 (S,O) 4 ] dimer-based periodic model structure with the average composition of [Mo 4 O 8 S 4 ] interfaced with the Ni 3 S 2 (101) surface is proposed. The interactions between the Ni of Ni 3 S 2 and bridging S/O of [Mo 4 O 8 S 4 ] result in an average formal Mo charge state between +5 and +6, and significant charge transfer from Ni 3 S 2 to [Mo 4 O 8 S 4 ] activates the Mo = O bonds. The calculated |ΔG H* | of less than 50 meV suggests that the double-bonded O is the most active site. This work points to the importance of oxy/sulfides with Mon+ (+5 < n < +6) as exceptional electrochemical catalysts for HER.
This page contains the data for the publication "Vanadium-Induced Lattice Compression and Electronic Modulation in Iridium-Ruthenium Electrocatalysts Boost Acidic Oxygen Evolution Reaction", 2026.
Efficiency of water splitting for hydrogen production is often limited by the sluggish kinetics of multiple electronic transfers required in the heterogeneous oxygen evolution reaction (OER). Catalyst design for reducing the high OER overpotential remains a major scientific challenge. Lattice-strain engineering, a method for tuning the electronic structure and surface geometric configuration of active sites, may greatly affect the interaction between adsorbates and catalytic surfaces for high activity and stability. Here, in this study, we present the synthesis of biphasic oxides of YPrSrRuMnO x , which consists of distinct phases of Y 2 Ru 2 O 7 pyrochlore and (Pr 0.7 Sr 0.3 )MnO 3 perovskite, and the development of a suitable analytical approach to study the strain–catalytic property relationship. Linear sweep voltammetry results reveal that the biphasic oxide exhibits approximately 3.1 times greater mass activity and 2.4 times larger turnover frequency (TOF) than single-phase Y 2 Ru 2 O 7 in the 0.1 M HClO 4 electrolyte. The biphasic catalyst is also about 3 times more stable than the single-phase oxide under acidic conditions. X-ray photoelectron spectroscopy, nitrogen isotherm, and electrochemical surface area analyses indicate that the oxidation state, specific surface area, and electrochemical surface area do not cause enough difference in the observed enhancement of OER performance. We examined the effects of microstrain on electrocatalysis, originating from lattice mismatch between different phases, using three different structural models. Specifically, we compared the Williamson–Hall method, standard stress–strain analysis, and Rietveld refinement in analyzing the structure–property relationship. Strain mapping using geometric phase analysis (GPA) further revealed significant microstrain and lattice dislocations localized near phase boundaries in the biphasic oxide, in contrast to the uniform strain in single-phase materials. The results reveal that the increased microstrain correlates well with the improved OER performance, as the biphasic oxide catalyst exhibits 2–3 times greater microstrain than Y 2 Ru 2 O 7 pyrochlore.
Transition-metal phosphides (MPs) are promising earth-abundant catalysts for hydrogen evolution reactions (HERs) due to their remarkable activity and stability. To further improve their properties, facet control is a key strategy. The growth of shape-selected nanoparticles may substantially enhance electrocatalytic activity, but this approach requires fundamental studies of facet-specific catalytic properties. There are only a few reports on the facet effects of MPs, which leads to a limited understanding of the activity of each facet and hampers catalyst design. Here, in this study, we grew large hexagonal-prism-shaped single crystals of three representative M 2 P (M = Ni, Co, and Fe) catalysts using metal flux routes. Two facets of M 2 P single crystals were tested to study facet-dependent HER activities, and it was consistently demonstrated that for all M 2 P crystals, a tip facet [(0001) for Ni 2 P/Fe 2 P and (010) for Co 2 P] had a higher activity than the side facet [(101̅0) for Ni 2 P/Fe 2 P and (100) for Co 2 P]. HER activity between the same facet elucidated the activity ordered between different transition metals as Fe 2 P > Co 2 P > Ni 2 P under low-potential regions. At high applied potentials, this trend is reversed due to the differences in Tafel slopes, with Ni 2 P becoming the most active catalyst, such that the activity of the (0001) facet of Ni 2 P approaches that of Pt. The calculated surface density of states (DOS) of each facet and its local curvature were found to be a useful descriptor for the activity trends among different transition metals of the same facets.
Ru-based oxygen evolution reaction (OER) catalysts show significant promise for efficient water electrolysis, but rapid degradation poses a major challenge for commercial applications. In this work, we explore several Ru-based pyrochlores (A 2 Ru 2 O 7 , A = Y, Nd, Gd, Bi) as OER catalysts and demonstrate improved activity and stability of catalytic Ru sites relative to RuO 2 . Furthermore, we combine complementary experimental and theoretical analysis to understand how the A-site element impacts activity and stability under acidic OER conditions. Among the A 2 Ru 2 O 7 studied herein, we find that a longer Ru–O bond and a weaker interaction of the Ru 4d and O 2p orbitals compared with RuO 2 results in enhanced initial activity. We observe that the OER activity of the catalysts changes over time and is accompanied by both A-site and Ru dissolution at different relative rates depending on the identity of the A-site. Pourbaix diagrams constructed using density functional theory (DFT) calculations reveal a driving force for this experimentally observed dissolution, indicating that all compositions studied herein are thermodynamically unstable in acidic OER conditions. Theoretical activity predictions show consistent trends between A-site cation leaching and OER activity. These trends coupled with Bader charge analysis suggest that dissolution exposes highly oxidized Ru sites that exhibit enhanced activity. Overall, using the stability number (molO2 evolved/molRu dissolved) as a comparative metric, the A 2 Ru 2 O 7 materials studied in this work show substantially greater stability than a standard RuO2 and commensurate stability to some Ir mixed metal oxides. Finally, the insights described herein provide a pathway to enhanced Ru catalyst activity and durability, ultimately improving the efficiency of water electrolyzers.
The renaissance of the energy system through the use of green hydrogen by water electrolysis lies behind the development of abundant, active, and scalable catalysts for the oxygen evolution reaction (OER). A fundumental understanding of the surface properties for these materials is of vital importance in producing viable heterogenous catalysts. In this feature article, we summarize several years of collaborative work on a uniquely faceted NiO(111) nanosheet possessing hexagonal holes with a focus on understanding how the evolution of the catalyst surface and bulk composition effects OER performance. The importance of surface faceting, morphological evolution, and metal combination by different doping strategies are all analyzed and summarized to further improve the material's performance. Furthermore, microwave and supercritical synthesis processes are utilized to understand how varying wet-chemical techniques effect the formation of the NiO(111) nanosheet and activity of the material. We discuss our chosen strategies and the difficulties encountered with optimizing a catalyst surface for the OER.
Abstract Bimetallic layered double hydroxides (LDHs) are promising catalysts for anodic oxygen evolution reaction (OER) in alkaline media. Despite good stability, NiCo LDH displays an unsatisfactory OER activity relative to the most robust NiFe LDH and CoFe LDH. Herein, a novel NiCo LDH electrocatalyst modified with single‐atom silver grown on carbon cloth (Ag SA ‐NiCo LDH/CC) that exhibits exceptional OER activity and stability in 1.0 m KOH is reported. The Ag SA ‐NiCo LDH/CC catalyst only requires a low overpotential of 192 mV to reach a current density of 10 mA cm −2 , obviously boosting the OER activity of NiCo LDH/CC (410 mV@10 mA cm −2 ). Inspiringly, Ag SA ‐NiCo LDH/CC can maintain its high activity for up to 500 h at a large current density of 100 mA cm −2 , exceeding most single‐atom OER catalysts. In situ Raman spectroscopy studies uncover that the in situ formed NiCoOOH during OER is the real active species. Hard X‐ray absorption spectrum (XAS) and density functional theory (DFT) calculations validate that single‐atom Ag occupying Ni site increases the chemical valence of Ni elements, and then weakens the adsorption of oxygen‐contained intermediates on Ni sites, fundamentally accounting for the enhanced OER performance.
The oxygen evolution reaction (OER) from water requires the formation of metastable, reactive oxygen intermediates to enable oxygen–oxygen bond formation. Conversely, such reactive intermediates could also structurally modify the catalyst. Here, a descriptor for the overall catalytic activity, the first electron and proton transfer OER intermediate from water, (M–OH*), has been associated with significant distortions of the metal–oxygen bonds upon charge-trapping. Time-resolved spectroscopy of in situ, photodriven OER on transition metal oxide surfaces has characterized M–OH* for the charge trapping and the symmetry of the lattice distortions by optical and vibrational transitions, respectively, but had yet to detect an interfacial strain field arising from a surface coverage M–OH*. Here, we utilize picosecond, coherent acoustic interferometry to detect the uniaxial strain normal to the SrTiO 3 /aqueous interface directly caused by Ti–OH*. The spectral analysis applies a fairly general methodology for detecting a combination of the spatial extent, magnitude, and generation time of the interfacial strain through the coherent oscillations’ phase. For lightly n-doped SrTiO 3 , we identify the strain generation time (1.31 ps), which occurs simultaneously with Ti–OH* formation, and a tensile strain of 0.06% (upper limit 0.6%). In addition to fully characterizing this intermediate across visible, mid-infrared, and now GHz-THz probes on SrTiO 3 , we show that strain fields occur with the creation of some M–OH*, which modifies design strategies for tuning catalytic activity and provides insight into photo-induced degradation so prevalent for OER. To that end, the work put forth here provides a unique methodology to characterize intermediate-induced interfacial strain across OER catalysts.
Tungsten oxides undergo a significant increase in their hydrogen evolution reaction activity upon proton-insertion coupled electron transfer.
Amorphous molybdenum disulfide (MoS 2 ) is a promising electrochemical catalyst for hydrogen evolution reaction (HER) due to more active sites exposed on the surface compared to its crystalline counterpart. In this study, a novel fast three-minute one-pot method is proposed to prepare the single-wall carbon nanotube- (SWCNT-) supported amorphous MoS 2 via a microwave heating process. Compared to traditional hydro- or solvent thermal methods to prepare MoS 2 which usually consume more than 10 hours, it is more promising for fast production. An overpotential at 10 mA/cm 2 of amorphous MoS 2 @SWCNT is 178 mV, which is 99 mV and 22 mV lower than crystalline MoS 2 @SWCNT and pure amorphous MoS 2 , respectively. After running 1000 cycles of polarization, ~2% increase in overpotential is observed, indicating its good stability. The enhanced performance results from the beneficial combination of the SWCNT substrate and the amorphous microstructures. The introduction of SWCNT increases catalyst conductivity and prevents MoS 2 aggregation. The amorphous microstructures of MoS 2 prepared by a microwave heating method lead to more Mo edges or active sites exposed.
Single-atom catalysts (SACs) have attracted attention for their high catalytic activity and selectivity, but the nature of their active sites under realistic reaction conditions, involving various ligands, is not well understood. In this study, we use Density Functional Theory calculations and grand canonical basin hopping to theoretically investigate the active site for the oxygen evolution reaction (OER) on single Pt atom supported on Indium Tin Oxide, including the influence of the electrochemical potential. We show that the ligands on the Pt atom change from Pt-OH in the absence of electrochemical potential to PtO(OH) 4 in electrochemical conditions. This change of the chemical state of Pt is associated to a decrease of 0.3V for the OER overpotential. This highlights the importance of accurately identifying the nature of the active site under reaction conditions and the impact of adsorbates on the electrocatalytic activity. This theoretical investigation enhances our understanding of SACs for OER.
Electrochemical water splitting plays a critical role in high purity hydrogen production. To lower capital cost and energy consumption, efficient catalysts are required to boost the hydrogen evolution reaction (HER), especially in alkaline media. Although PtRu alloy materials are still considered the state-of-the-art catalyst for the HER under alkaline media, large-scale application is hindered by its scarcity and high cost. NiMo alloy catalysts can be potential Pt-free alternatives to drive the sluggish kinetics of the HER under alkaline media, but their HER activity is still not ideal due to the limitation of Volmer step. Herein, we investigated the impact of trace levels of PtRu catalysts on NiMo electrodes towards the HER by incorporating advantages of both PtRu and NiMo catalysts to minimize cost and maintain a promising HER activity. Trace levels of PtRu catalysts from 0.0173 to 0.2648 mg cm −2 were loaded on commercial NiMo foam electrodes by a facile electrodeposition technique utilizing ppm concentration levels of PtRu in electrolyte. The results show that 0.0173 mg cm −2 PtRu loading on NiMo electrode can significantly enhance HER activity compared to the pristine NiMo foam electrode (Tafel slopes drop from ∼170 to ∼60 mV dec −1 ) due to the remarkable decline of energy barriers towards water dissociation and hydrogen adsorption. Meanwhile, the rate determining step (RDS) switches from the Volmer step to the Heyrovsky step when the PtRu loading increases to 0.0675 mg cm −2 . Promising catalytic stability is observed at 100 mA cm −2 over the course of 50 h with a PtRu loading of 0.1198 mg cm −2 . In conclusion, this work demonstrates a potential strategy to decrease the cost and simultaneously maintain superior HER performance by integrating trace levels of PtRu catalyst with NiMo foam electrodes.
NiFeO x materials are known as among the most active catalysts toward oxygen evolution reaction (OER) for hydrogen generation in alkaline media. Nevertheless, the long-term durability of NiFeO x catalysts for OER is still too far to the industrial application. Herein, we prepared a NiFeReO x catalyst with single-site Re dopants and observed that the single-site Re dopants could significantly enhance the durability without compromising the activity. A cell voltage of 1.82 V without iR correction is noted at the current density of 3000 mA cm –2 in anion-exchange membrane water electrolyzer (AEMWE) with NiFeReO x catalyst, and a very small degradation is observed under 2000 and 1000 mA cm –2 , which remarkably outperforms the pristine NiFeO x . Additionally, the overpotential of 305 mV at 10 mA cm –2 is achieved with the NiFeReO x catalyst, which is lower than 50 mV compared with the pristine NiFeO x catalyst, together with a smaller Tafel slope of 54.3 mV dec -1 . The boosted OER durability and activity of the NiFeReO x catalyst could be attributed to the strong electron-withdrawing property of Re 7+ single atoms leading to the electronic structure optimization and stabilization of Ni/Fe active sites. Our insights propose a new path for designing NiFeO x catalysts with high durability and activity toward OER.
Electrochemical water splitting has been considered a clean and continual way for hydrogen (H 2 ) production. Direct seawater electrolysis is a potentially attractive technology due to the ample access to seawater and scarce freshwater resources in some regions. However, the presence of impurities (e.g., Cl - , Mg 2+ ) and the resulting corrosion and side reactions, such as the chloride oxidation reaction (ClOR), makes seawater electrocatalysis more challenging than that of fresh or alkaline water due to competition with the oxygen evolution reaction (OER) at the anode. Consequently, much effort has been devoted to developing approaches to enhance OER performance and suppress the ClOR. In this minireview, we summarize three general strategies for enhancing OER activity and selectivity in seawater electrolysis based on three different concepts: (1) the sole development of robust and high-performance OER catalysts in pure seawater electrolytes, (2) the introduction of additives to seawater electrolytes (e.g., alkalis and/or salts without chloride) to enhance the potential equilibrium gap between the ClOR and OER in combination with regular highly active OER catalysts, and (3) a combination of approaches (1) and (2). Finally, the current challenges and potential opportunities for green H 2 production from seawater electrolysis are briefly presented.
Manganese antimonate (Mn y Sb 1–y O x ) electrocatalysts for the oxygen-evolution reaction (OER) were synthesized via chemical vapor deposition. Mn-rich rutile Mn 0.63 Sb 0.37 O x catalysts on fluorine-doped tin oxide (FTO) supports drove the OER for 168 h (7 days) at 10 mA cm –2 with a time-averaged overpotential of 687 ± 9 mV and with >97% Faradaic efficiency. Time-dependent anolyte composition analysis revealed the steady dissolution of Mn and Sb. Extended durability analysis confirmed that Mn-rich Mn y Sb 1–y O x materials are more active but dissolve at a faster rate than previously reported Sb-rich Mn y Sb 1–y O x alloys.