Search NASA⌕ Search

SEARCH · Search NASA

Results for “Experimental searches”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

A search for the effect of a high frequency spark on boundary-layer transition at Mach 8.5

An experimental investigation of the use of a high frequency spark to promote early boundary layer transition on a wind tunnel model was conducted at a Mach number of 8.5. Test variables included four electrode configurations, a frequency range from 10 kHz to 50 kHz, and various power inputs to the spark. The general conclusion obtained from this investigation is that over the parameter range, the high frequency spark is ineffective in inducing early transition at the test Mach number.

Anders, J. B.↗
NASA NTRS2019

Lipid Decontamination Procedures for Life Detection Missions

Molecular biosignatures are key targets for current, proposed, and future life detection missions. With the high accuracy and low limit of detection (LOD) that new and future instruments will require, decontamination of life detection hardware is necessary to prevent false positives. Lipids are a molecular biosignature of interest, as they are ubiquitous to all life as we know it, can survive unaltered in the geologic record for longer than any other biomolecule (i.e. billions of years), and form through both biotic and abiotic processes. Lipids display origin-diagnostic molecular patterns that can reveal biotic or abiotic synthesis, so finding them and ascertaining their molecular features is important for potentially detecting evidence of life elsewhere. Traditional methods of decontamination, or contamination control (CC), primarily clean hardware through fabrication in sterile (cleanroom) environments, killing microbes, and removing/flushing contaminants off instrument and spacecraft components. However, research suggests that some standard cleaning methods are either unlikely to remove lipid contaminants or are incompatible with life detection instrument materials. To solve this problem, I propose to find, test, and verify a decontamination method that thoroughly cleans instruments by destroying lipid molecules, but is simultaneously compatible with major materials used in these instruments. I will study the effects of traditional CC methods (including Dry Heat Microbial Reduction and Vapor phase Hydrogen Peroxide) and experimental CC methods (Electron Beam Irradiation) on lipid molecules for application to life detection instrumentation. I will then develop a CC plan for a novel lipid detector (ExCALiBR, Extractor for Chemical Analysis of Lipid Biomarkers in Regolith) searching for lipids in either soil or icy world scenarios. This plan will uphold planetary protection regulation requirements and validate experimental analyses of in-situ life detection tests.

Decontamination↗
NASA NTRS1972

Zr-92(d,p)Zr-93 and Zr-92(d,t)Zr-91

The structures of Zr-93 and Zr-91 were studied by the stripping reaction Zr-92(d,p)Zr-93 and the pick-up reaction Zr-92(d,t)Zr-91 using 13 MeV incident deuterons. The reaction product particles were detected by counter telescope. Typical spectra from the reactions were analyzed by a nonlinear least squares peak fitting program which included a background search. Spin and parity assignments to observed excited levels were made by comparing experimental angular distributions with distorted wave Born approximation calculations.

Baron, N.↗
NASA NTRS1991

On the limit of field-aligned current intensity in the polar magnetosphere

Field-aligned current (FAC) is here defined by 4 pi j = alpha B, where alpha is constant along a magnetic field line. The upper limit value of alpha in the polar magnetosphere, possible source regions of the strongest FAC and the relationship of them to some auroral and ionospheric irregularity cross-field scale sizes are discussed. Cross-field dimensions of the strongest FAC are related to the gyroradii of source particles (O(+), He(2+), He(+), H(+), e) in the current-generating region. It is suggested that experimental determination, and mapping of the values of alpha, may assist with the search for the generators of such currents in near-earth space including in the nearby solar wind. The upper limit of alpha is associated with the breakup of FAC systems.

Cole, Keith D.↗
NASA NTRS2019

Ultrastable environment control for the NEID spectrometer: design and performance demonstration

Two key areas of emphasis in contemporary experimental exoplanet science are the detailed characterization of transiting terrestrial planets and the search for Earth analog planets to be targeted by future imaging missions. Both of these pursuits are dependent on an order-of-magnitude improvement in the measurement of stellar radial velocities (RV), setting a requirement on single-measurement instrumental uncertainty of order 10 cm∕s. Achieving such extraordinary precision on a high-resolution spectrometer requires thermomechanically stabilizing the instrument to unprecedented levels. We describe the environment control system (ECS) of the NEID spectrometer, which will be commissioned on the 3.5-m WIYN Telescope at Kitt Peak National Observatory in 2019, and has a performance specification of on-sky RV precision <50 cm/s. Because NEID’s optical table and mounts are made from aluminum, which has a high coefficient of thermal expansion, sub-milliKelvin temperature control is especially critical. NEID inherits its ECS from that of the Habitable-Zone Planet Finder (HPF), but with modifications for improved performance and operation near room temperature. Our full-system stability test shows the NEID system exceeds the already impressive performance of HPF, maintaining vacuum pressures below 10(exp −6) Torr and a root mean square (RMS) temperature stability better than 0.4 mK over 30 days. Our ECS design is fully open-source; the design of our temperature-controlled vacuum chamber has already been made public, and here we release the electrical schematics for our custom temperature monitoring and control system.

Paul Robertson↗
NASA NTRS2014

Evaluation of Dielectric-Barrier-Discharge Actuator Substrate Materials

A key, enabling element of a dielectric barrier discharge (DBD) actuator is the dielectric substrate material. While various investigators have studied the performance of different homogeneous materials, most often in the context of related DBD experiments, fundamental studies focused solely on the dielectric materials have received less attention. The purpose of this study was to conduct an experimental assessment of the body-force-generating performance of a wide range of dielectric materials in search of opportunities to improve DBD actuator performance. Materials studied included commonly available plastics and glasses as well as a custom-fabricated polyimide aerogel. Diagnostics included static induced thrust, electrical circuit parameters for 2D surface discharges and 1D volume discharges, and dielectric material properties. Lumped-parameter circuit simulations for the 1D case were conducted showing good correspondence to experimental data provided that stray capacitances are included. The effect of atmospheric humidity on DBD performance was studied showing a large influence on thrust. The main conclusion is that for homogeneous, dielectric materials at forcing voltages less than that required for streamer formation, the material chemical composition appears to have no effect on body force generation when actuator impedance is properly accounted for.

Wilkinson, Stephen P.↗
NASA NTRS1993

Damage detection using experimentally measured mass and stiffness matrices

A method is presented for locating physical damage or change in a structure using experimentally measured mass and stiffness matrices. The approach uses a recently developed algorithm for transforming a state-space realization into a second order structural model with physical displacements as the generalized coordinates. This is accomplished by first rotating a state-space model of the identified structural dynamics into modal coordinates and approximating the mass normalized modal vectors for the output measurement set. Next, the physical mass, damping and stiffness matrices are synthesized directly from the measured modal parameters. This yields experimental mass and stiffness matrices for the structure without the use of a finite element model or a numerical search. The computed mass and stiffness are asymptotically equivalent to a static condensation of the global physical coordinate model. Techniques for solving the inverse connectivity problem are then developed whereby it is possible to assess the stiffness in a region of the structure bounded by several sensors. Applications to both simulated data and experimental data are used to discuss the effectiveness of the approach.

Peterson, L. D.↗
NASA NTRS1974

Alternative explanations for the observations of unknown heavy-mass particles in cosmic-ray showers

Several experiments were conducted in the 1960s in search of unknown heavy-mass strongly interacting particles in cosmic rays using an experimental technique suggested by B. Peters et al. (1965). The experiments looked for particles which are delayed more than 20 nanoseconds behind the front of EAS and deposit more than 20 GeV in a calorimeter. None of the experimental results demand the existence of such particles. All observations can be interpreted as due either to incident nuclei or to inaccurate estimates of the systematics with energy determination using calorimeters.

Orth, C. D.↗
NASA NTRS1994

Study of development and utilization of a multipurpose atmospheric corrosion sensor

There has been a critical need for analyzing various aspects of atmospheric corrosion and for the development of atmospheric corrosion microsensors. The project work has involved the following activities: (1) making of multielectrode corrosion monitors on dielectric substrates; (2) testing them in the laboratory for functional characteristics; (3) preparing a report on the state of the art of atmospheric corrosion sensor development around the world; and (4) corrosion testing of electrochemical changes of sensor specimens and related fog testing. The study included work on the subject of development and utilization of a multipurpose atmospheric corrosion sensor and this report is the annual report on work carried out on this research project. This has included studies on the development of sensors of two designs, stage 1 and stage 2, and with glass and alumina substrate, experimentation and development and characterization of the coating uniformity, aspects of corrosion monitoring, literature search on the corrosion sensors and their development. A state of the art report on atmospheric corrosion sensor development was prepared and submitted.

Diwan, Ravinder M.↗
NASA NTRS1985

A search for sources of ultra high energy gamma rays at air shower energies with Ooty EAS array

A 24 detector extensive air shower array is being operated at Ootacamund (2200 m altitude, 11.4 deg N latitude) in southern India to search for sources of Cosmic gamma rays of energies greater then 5 x 10 to the 13th power eV. The angular resolution of the array has been experimentally estimated to be better than about 2 deg. Since June '84, nearly 2.5 million showers have been collected and their arrival directions determined. These showers are being studied to search for very high energy gamma ray emission from interesting astrophysical objects such as Cygnus X-3, Crab pulsar and Geminga.

Tonwar, S. C.↗
NASA NTRS2020

Fungal Exposure to Meteorite Thin Sections: Developing an Experimental to Observe Biogeochemical Changes

The Astromaterials Acquisition & Curation Office maintains collections of meteorite samples collected as part of the Antarctic Search for Meteorites (ANSMET) program. The chief goal of the curation department is to maintain these meteorites in pristine condition. The Astromaterials Research and Exploration Science (ARES) Directorate has implemented a microbial monitoring program for the meteorite collections that has resulted in the isolation of >100 fungal isolates [1], however it is currently unknown if these isolates could present danger to the collections through bioweathering or secretion of organic compounds. We grew a strain of Fusarium oxysporium isolated from nitrogen gas filters feeding the Meteorite Lab nitrogen gas in the presence of a H5 meteorite thin section to determine if this fungus has the capability of altering the mineral structure of this common meteorite. This first trial was to determine and understand the effects of Fusarium oxysporum growth on the iron content within H5 chondrites and evaluate what additional components are needed in the development of future trial runs. This experiment determined new considerations for handling samples, the nature of microscopic scans before and after the incubation period, and the quality of the samples utilized for the experiment. The results of this experiment were promising and warrant further investigation with a more refined process and timeline.

Barbre, K. S. R.↗
NASA NTRS1986

Stanford Hardware Development Program

Architectures for high performance, digital signal processing, particularly for high resolution, wide band spectrum analysis were developed. These developments are intended to provide instrumentation for NASA's Search for Extraterrestrial Intelligence (SETI) program. The real time signal processing is both formal and experimental. The efficient organization and optimal scheduling of signal processing algorithms were investigated. The work is complemented by efforts in processor architecture design and implementation. A high resolution, multichannel spectrometer that incorporates special purpose microcoded signal processors is being tested. A general purpose signal processor for the data from the multichannel spectrometer was designed to function as the processing element in a highly concurrent machine. The processor performance required for the spectrometer is in the range of 1000 to 10,000 million instructions per second (MIPS). Multiple node processor configurations, where each node performs at 100 MIPS, are sought. The nodes are microprogrammable and are interconnected through a network with high bandwidth for neighboring nodes, and medium bandwidth for nodes at larger distance. The implementation of both the current mutlichannel spectrometer and the signal processor as Very Large Scale Integration CMOS chip sets was commenced.

Peterson, A.↗
NASA NTRS1952

Experimental Aerodynamic Derivatives of a Sinusoidally Oscillating Airfoil in Two-Dimensional Flow

Experimental measurements of the aerodynamic reactions on a symmetrical airfoil oscillating harmonically in a two-dimensional flow are presented and analyzed. Harmonic motions include pure pitch and pure translation, for several amplitudes and superimposed on an initial angle of attack, as well as combined pitch and translation. The apparatus and testing program are described briefly and the necessary theoretical background is presented. In general, the experimental results agree remarkably well with the theory, especially in the case of the pure motions. The net work per cycle for a motion corresponding to flutter is experimentally determined to be zero. Considerable consistent data for pure pitch were obtained from a search of available reference material, and several definite Reynolds number effects are evident.

Halfman, Robert L↗
NASA NTRS1939

Tests of Airfoils Designed to Delay the Compressibility Burble

Development of airfoil sections suitable for high-speed applications has generally been difficult because little was known of the flow phenomenon that occurs at high speeds. A definite critical speed has been found at which serious detrimental flow changes occur that lead to serious losses in lift and large increases in drag. This flow phenomenon, called the compressibility burble, was originally a propeller problem, but with the development of higher speed aircraft serious consideration must be given to other parts of the airplane. Fundamental investigations of high-speed airflow phenomenon have provided new information. An important conclusion of this work has been the determination of the critical speed, that is, the speed at which the compressibility burble occurs. The critical speed was shown to be the translational velocity at which the sum of the translational velocity and the maximum local induced velocity at the surface of the airfoil or other body equals the local speed of sound. Obviously then higher critical speeds can be attained through the development of airfoils that have minimum induced velocity for any given value of the lift coefficient. Presumably, the highest critical speed will be attained by an airfoil that has uniform chordwise distribution of induced velocity or, in other words, a flat pressure distribution curve. The ideal airfoil for any given high-speed application is, then, that form which at its operating lift coefficient has uniform chordwise distribution of induced velocity. Accordingly, an analytical search for such airfoil forms has been conducted and these forms are now being investigated experimentally in the 23-inch high-speed wind tunnel. The first airfoils investigated showed marked improvement over those forms already available, not only as to critical speed buy also the drag at low speeds is decreased considerably. Because of the immediate marked improvement, it was considered desirable to extend the thickness and lift coefficient ranges for which the original forms had been designed before further extending the investigation.

Stack, John↗
NASA NTRS2010

Finding Interstellar Particle Impacts on Stardust Aluminium Foils: The Safe Handling, Imaging, and Analysis of Samples Containing Femtogram Residues

Impact ionisation detectors on a suite of spacecraft have shown the direction, velocity, flux and mass distribution of smaller ISP entering the Solar System. During the aphelion segments of the Stardust flight, a dedicated collector surface was oriented to intercept ISP of beta = 1, and returned to Earth in January 2006. In this paper we describe the probable appeareance and size of IS particle craters from initial results of experimental impacts and numerical simulation, explain how foils are being prepared and mounted for crater searching by automated acquisition of high magnification electron images (whilst avoiding contamination of the foils) and comment on appropriate analytical techniques for Preliminary Examination (PE).

Kearsley, A. T.↗
NASA NTRS2022

CO Chondrite Parent Body Processing as Recorded by Noble Gases

**Introduction:** CO carbonaceous chondrites are among the most primitive meteorites, of which some experienced mild degrees of thermal alteration (up to 500 °C) in their parent asteroid. Previous studies on aqueously altered CM, CY and CR chondrites have shown that the noble gases preserved in those meteorites can be used to assess the extent of parent body processing. This is mostly due to an Ar-rich carrier phase being susceptible to aqueous alteration. In this study, we follow up on these findings by investigating the effects of mild thermal alteration on the noble gas content of CO chondrites. They are subclassified from petrologic subtype 3.0 (e.g., Yamato-81025) to 3.8 (e.g., Isna) according to the degree of thermal alteration experienced. Understanding these effects does not only help to distinguish the most primitive samples from the severely altered ones, but also adds to the picture of the primordial volatile composition and distribution, as preserved in the most primitive material which accreted from the solar nebula at different heliocentric distances. Additionally, we search for pairing among samples, as part of an ongoing survey of Antarctic CO chondrites. **Experimental:** Noble gas measurements were conducted on aliquots of ~20-25 mg from 16 different samples of varying petrologic subtype from 3.0 to 3.8. The gas extraction occurred in one temperature step at ~1700 °C, followed by separation into three fractions, He-Ne, Ar, and Kr-Xe, measured successively in a custom-built mass spectrometer. For each sample, complete gas extraction was verified by a re-extraction step at ~1750 °C. Details on the sample preparation and measurement protocols can be found in. **Results and Discussion:** In most cases, the gas concentrations for all five noble gases decrease with increasing petrologic subtype, and the trend is most pronounced for Ne. An exception is e.g. CO3.0 Colony, which is strongly terrestrially weathered. CO3.8 Isna shows an unusually short expo-sure time to cosmic rays (~0.15 Ma), which may be explained by a direct injection into a mean orbital resonance shortly after collision. The currently ill-defined Ar-rich carrier phase, found only in the least aqueously altered CM and CR samples, is still abundantly present in the predominately anhydrous CO chondrites, indicating that this component is less susceptible to moderately elevated temperatures. No CO chondrites examined so far contain solar wind, supporting the hypothesis that CO chondrites originate from the asteroidal interior. It thus remains enigmatic which material could account for the surface layer.

Noble gas↗
NASA NTRS2020

Corrosion Resistance of Materials in the Mars Environment

This paper presents the results of a literature search of available data relevant to corrosion resistance of materials in the Mars environment, as a background for future experimental work. Corrosion resistance is one of the most important properties in selecting materials for landed spacecraft and structures that will support surface operations for the human exploration of Mars. Currently, the selection of materials is done by assuming that the corrosion behavior of a material on Mars will be the same as that on Earth. This is understandable since there is no data available on the corrosion resistance of materials in the Mars environment. However, given that corrosion is defined as the degradation of a metal that results from its chemical interaction with the environment, it cannot be assumed that corrosion is going to be the same in both environments, since they are significantly different. This theoretical study was motivated by the suggestion, by a team of researchers, that some of the structural degradation observed on Curiosity's wheels may have been caused by corrosive interactions with the transient liquid brines, reported to be present on Mars, while the most significant damage was attributed to mechanical damage. An extensive literature search, on data relevant to corrosion on Mars, confirmed the need to investigate the interaction between materials, used for spacecraft and structures designed to support long-term surface operations on Mars, and the Mars environment. Experimental studies are needed to investigate the corrosion behavior of materials in relevant components of the Mars environment such as: the Mars atmosphere, the presence of brines, the interaction between these brines and materials, the effect of radiation on these interactions, and the possible catalytic effects of the clays present in the Martian regolith. The findings from this theoretical study provide strong justification to conduct experimental work to investigate the interaction between spacecraft materials with simulated Martian environments to reduce Mars exploration costs.

Calle, Luz M.↗
NASA NTRS1975

An experimental study of several wind tunnel wall configurations using two V/STOL model configurations

Experiments were conducted in the low speed wind tunnel using two V/STOL models, a jet-flap and a jet-in-fuselage configuration, to search for a wind tunnel wall configuration to minimize wall interference on V/STOL models. Data were also obtained on the jet-flap model with a uniform slotted wall configuration to provide comparisons between theoretical and experimental wall interference. A test section configuration was found which provided some data in reasonable agreement with interference-free results over a wide range of momentum coefficients.

Binion, T. W., Jr.↗