Search NASA⌕ Search

SEARCH · Search NASA

Results for “FELIX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Resolving Competing Ultraviolet Photoinduced Ring-Opening and Dissociation Pathways in Iodothiophenes by Ultrafast Electron Diffraction

The ultraviolet photochemistry of halothiophenes is thought to proceed via competing pathways, prompt C–X (X = halogen) bond fission, and parent ring opening followed by fragmentation, yet direct structural evidence distinguishing these mechanisms is limited. Here, time-resolved gas-phase ultrafast electron diffraction (UED) has been used to directly follow the structural dynamics of 2- and 3-iodothiophene following photoexcitation at 247 nm. For both isomers, the time-resolved pair distribution functions reveal the appearance of new interatomic distances that cannot be explained by simple C–I bond cleavage and formation of C 4 SH 3 radical cofragments. The signatures, particularly those for 2-iodothiophene, are consistent with a rival ring-opening channel of the intact parent, which evolve on time scales distinct from those associated with the direct C–I bond cleavage. In addition, the extracted kinetics indicate that the ring-opening channel occurs faster in 2-iodothiophene than in the 3-isomer at this excitation wavelength. Furthermore, these measurements provide direct geometric evidence for competing pathways leading to different structures following photodissociation in a model heteroaromatic and further establish UED as a sensitive probe of complex excited-state chemistry.

Bond cleavage↗
DOE OSTI2026

Electron–Ion Covariance Reveals Geometry-Resolved Inner-Shell Spectra in CS 2 Photodissociation

The chemical shifts of inner-shell atomic orbitals are highly sensitive to chemical bonding and molecular structure. In evolving systems, however, the spectra of distinct molecular species and geometries overlap, obscuring the underlying chemical dynamics. Here we demonstrate the use of electron–ion covariance analysis to combine the structural sensitivity of Coulomb explosion imaging with inner-shell spectroscopy, yielding geometry-specific spectra of transient and product species. We apply this approach to the excited state dynamics of CS 2 probed by ionization above the S 2p edge. Electron–ion covariance with time- and momentum-selected S + and S 2+ ions isolates distinct S 2p photoelectron spectra for ground-state CS 2 , bent photoexcited CS 2 , the CS photoproduct, and bare atomic sulfur ─ species whose spectra overlap strongly in the channel-averaged measurement. Clear chemical shifts are observed in the covariance photoelectron spectrum for each of these species, all of which are consistent with high-level calculations. Here, by extracting the atomic S contribution to the photoelectron spectrum in a finely time-resolved manner we can disentangle this contribution to the overall time-resolved photoelectron spectrum as the photodissociation proceeds. These results demonstrate the promise of electron–ion covariance as a general approach to geometry-resolved inner-shell spectroscopy, opening a route to tracking structural evolution through chemical shifts in complex photoexcited molecules.

Ionization↗
DOE OSTI2026

Surface-Initiated Atom Transfer Radical Polymerization Using Hydrogel Reactors

Atom transfer radical polymerization (ATRP) is a controlled radical polymerization method that enables the synthesis of tailored polymeric materials with low dispersity, highlighting its immense potential for green fabrication of advanced materials. However, its broader implementation is limited by challenges in product isolation, maintaining catalyst activity, and mitigating atmospheric sensitivity arising from oxygen-sensitive metal catalysts. Here, gelatin hydrogels (GHs) are introduced as a soft “reactor” matrix for interfacial ATRP, operating with minimal metal-catalyst loading while exhibiting possibly an organoreductive behavior. This strategy leverages activator regeneration via electron transfer through a ligand–metal charge-transfer (LMCT) mechanism to reduce oxidized metal catalysts within the GH network. Polymerization is evaluated by growing polymer brushes at an active interface formed between GHs swollen in monomer solution and an initiating surface, and sequential growth experiments confirmed that GH-mediated ATRP preserves living character. Under UV illumination, LMCT is activated, producing polymers both at the desired interface and within the GH bulk. UV–Vis spectroscopy revealed active reduction of Cu(II) to Cu(I) along with concentration-dependent complex formation, indicating dynamic coordination chemistry within the hydrogel. The redox-active arginine- and glutamic acid-rich gelatin backbone coordinates and reduces the metal center, enabling ATRP at ppm-level catalyst concentrations. While polymerization proceeds in GH-Cu(II) reactors, adding external mobile ligands to the GH results in longer polymer brushes. Here, the results reported here are exploratory. More experiments are needed to characterize polymer brush growth in GHs and compare it to conventional surface-initiated polymerization in solution.

Absorption↗
DOE OSTI2025

Bidirectional Suzuki Catalyst Transfer Polymerization of Poly( p -phenylene)

Suzuki catalyst transfer polymerization (SCTP) has emerged as an effective method for accessing length-controlled π-conjugated poly(p-phenylene). Regio-controlled functional group sequencing along the backbone and the chain ends of synthetic polymers remains a challenge for the successful integration of organic semiconductors in sensors and electronic devices. Here, we report a bidirectional SCTP system based on dinuclear palladium(II) initiators. Functional groups transferred during the initiation and termination steps unlock independently addressable synthetic handles at the polymer core and respective chain ends. These functional groups open opportunities for late-stage regio-controlled and chemoselective derivatizations. Control over key polymer parameters, including molecular weight (M n ), dispersity ( Đ = M w /M n ), degree of polymerization ( DP ), termination efficiency, and functional group interconversion, is corroborated by size exclusion chromatography (SEC) and NMR spectroscopy. The modular design of SCTP initiators, in combination with commercially available terminating groups, represents a highly flexible toolbox for late-stage polymer conjugation, e.g., chemoselective anchoring groups for integration with functional electronics or bioorthogonal conjugation for molecular sensing.

Aldehydes↗
DOE OSTI2024

Electric-Field-Driven Localization of Molecular Nanowires in Wafer-Scale Nanogap Electrodes

As integrated circuits continue to scale toward the atomic limit, bottom-up processes, such as epitaxial growth, have come to feature prominently in their fabrication. At the same time, chemistry has developed highly tunable molecular semiconductors that can perform the functions of ultimately scaled circuit components. Hybrid techniques that integrate programmable structures comprising molecular components into devices however are sorely lacking. Here we demonstrate a wafer-scale process that directs the localization of a conductive polymer, M w = 20 kg mol –1 polyaniline, from dilute solutions into 50 nm vertical nanogap device architectures using electric-field-driven self-assembly. The resulting metal–polymer–metal junctions were characterized by electron microscopy, Raman spectroscopy and transport measurements demonstrating that our technique is highly selective, assembling conductive polymers only in electrically activated nanogaps. Our results represent a step toward scalable hybrid nanoelectronics that seamlessly integrate established lithographic top-down fabrication with bottom-up synthesized molecular functional circuit components.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Kinetic Isotope Effect in the Radical Step-Growth Termination of On-Surface Synthesized Graphene Nanoribbons

Bottom-up on-surface synthesis has emerged as a versatile tool to access and finely tune the electronic structure of nanographenes. The controlled generation of reactive intermediates catalyzed and stabilized by a supporting substrate has enabled the design, assembly, and characterization of a wide range of exotic tailor-made quantum materials. Even under these tightly controlled conditions, the growth of extended structures remains limited by termination processes and undesired side reactions. Here, we identify an H atom transfer as one principal contributor to the radical step growth termination that limits the on-surface growth of N = 7 armchair graphene nanoribbons (7-AGNRs) on Au(111) surfaces. Analysis of 7-AGNR lengths grown from protiated and deuterated molecular precursors reveals a primary kinetic isotope effect of KIE ∼ 1.4. First-principles density functional theory calculations suggest that a concerted H atom transfer mechanism that involves the breaking of a C–H/D bond in the transition state is associated with radical chain termination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Immobilizing a Lehn-Type Catalyst with Nitrocyclocondensation Chemistries: CO 2 Reduction on Silicon Hybrid Photoelectrodes

Here, we present the first examples of installing a redox reporter and CO 2 reduction (CO 2 R) catalyst onto freshly HF-etched Si (photo)­electrodes using a solution-phase nitrocyclocondensation (NCC) reaction. Previous studies detailed the mechanism of NCC reactions on Si under ultrahigh vacuum conditions but have not applied these chemistries to generate functional (photo)­electrodes. Installing 4-nitrophenyl ferrocene (4-NpFc) molecules directly onto degenerately doped p + Si allowed us to evaluate the effects of different NCC reaction conditions on coverage (e.g., 3.6 ± 1.2 × 10 –11 mol/cm 2 ) and electrochemical reversibility. The 4-NpFc molecules remained immobilized under the reducing potentials (−2.0 V vs Fc +/0 in acetonitrile) needed to drive molecular CO 2 R catalysts. Installing 4-nitroaniline (4-NA) molecules onto low-doped pSi allowed us to couple Lehn-type Re­(I) catalysts with pendant carboxylic acids. The CO Faradaic efficiency of CO production under 1-sun illumination (−2.15 V vs Fc +/0 ) was 23% in CO 2 -saturated electrolyte, a value that surpasses previous examples of CO 2 R catalyst monolayers on Si. These two examples highlight the versatility of solution-phase NCC attachment chemistries for generating functional Si (photo)­electrodes.

catalysis↗
DOE OSTI2025

Morphological Degradation of Oxygen Evolution Reaction-Electrocatalyzing Nickel Selenides at Industrially Relevant Current Densities

We investigated electrodeposited nanoparticulate nickel selenide (pre)catalysts that transform into nickel oxides/ oxyhydroxides under oxygen evolution reaction conditions in alkaline solutions. Previous studies of this transformation were conducted at lower current densities than those of industrial relevance (≥1 A cm −2 ). We used ultramicroelectrodes (UMEs) to achieve such current densities, benefiting from their small size, ensuring low absolute currents and low ohmic drop but high current densities. Morphological degradation of the catalyst material was only observed at current densities exceeding 1 A cm −2 but not for smaller ones. Using X-ray absorption, Xray photoemission spectroscopy, and X-ray diffraction, we confirmed that the degradation was accompanied by the literature-known transformation of nanoparticulate Ni 3 Se 2 (bulk)/NiSe (surface) into nickel oxyhydroxide. The transformation of the precatalyst goes along with a significant improvement in the charge transfer kinetics observed by decreasing Tafel slopes with ongoing experimental time extracted from cyclic voltammetry (CV) experiments and electrochemical impedance spectroscopy (EIS) in the high-frequency range. However, these kinetic improvements are accompanied by limitations in mass transport concluded from decreasing current responses at high overpotentials in CVs and increasing impedance in the low-frequency range of the EIS spectra after extended CV cycling. These mass transport limitations originated from morphological degradations at the UME exceeding 1 A cm −2 which we proved by applying identical location scanning electron microscopy. This has not been reported in studies that have been limited to lower current densities before. Our findings showcase how UMEs can be used to study (pre)catalysts (herein nickel selenides) under current densities of industrial relevance in the absence of ohmic drop-related ambiguities, combined with in-depth materials characterization studies, e.g., identical location microscopy and advanced spectroscopic methods. This approach enables direct evaluation and comparison of catalyst materials and thus demonstrates how to overcome long-standing limitations of electrocatalyst design and testing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Self-Sensing Composites via an Embedded 3D-Printed PVDF-MoS 2 Nanosensor for Structural Health Monitoring

Carbon fiber (CF)-reinforced epoxy composites are widely used in vehicle applications, where early damage detection is crucial for reliability and safety. To address this need, we developed a self-sensing epoxy/CF composite by embedding a PVDF-MoS 2 nanosensor via an embedded 3D printing method. By harnessing the intrinsic curing kinetics of epoxy, we tailored its rheological properties to optimize the embedded printing process, enabling precise and reliable support for sensor filaments without compromising the composite’s structural and functional integrity. Through comprehensive rheological and kinetic analysis, we established a quantitative relationship among curing temperature, conversion rate, and resulting yield modulus─defining a narrow processing window essential for successful sensor integration. Specifically, we identified that an epoxy yield modulus range of 180–294 Pa and a conversion rate below 10% are critical to support the PVDF-MoS 2 filament architecture. Here, this embedded 3D printing method produces complex and multimaterial PVDF-MoS 2 sensors within an epoxy matrix with minimal deformation and reduced postprocessing, which is scalable and adaptable for industrial applications. Under cyclic loading, the embedded sensors exhibited stable signals under constant loads and increased voltage signals in response to crack formation (17–35% higher) and catastrophic failure (1 order of magnitude higher), effectively capturing structural changes in real time. This study demonstrates the potential of PVDF-MoS 2 nanocomposite sensor materials for real-time structural health monitoring in epoxy–CF composite systems, enabling early detection of defects and stress anomalies, significantly reducing the risk of unexpected failures, and enhancing structural reliability.

PVDF-MoS2 sensor↗
DOE OSTI2026

Syngas Production at Si Hybrid Photoelectrodes Modified with Re(I) and Mn(I) Tricarbonyl Phenanthroline Complexes Containing Reactive Aryl Azide Groups

We installed molecular CO 2 reduction (CO 2 R) catalysts directly onto Si (photo)electrodes. The highly reactive M(5-azido-1,10-phenanthroline)(CO) 3 X (where M = Mn or Re, X = Br or Cl) complexes readily bubbled when dissolved in polar organic solvents, in both the presence and absence of an ultraviolet light source. When placed on hydrogen-terminated Si (H-Si) and native silicon oxide (SiOx), similar amounts of the complex were attached to the surface under illumination (367 nm, 50–200 mW/cm 2 ) or in the dark. Surprisingly, these films revealed submonolayer coverages instead of the multilayered structures we expected. DFT analyses support monolayer formation, showing that the triplet-state nitrene of the complex is more energetically favorable than the singlet state. Using controlled-potential electrolysis experiments, we showed that Re- and Mn-containing films on pSi photoelectrodes generated small amounts of CO when exposed to 1 atm of CO 2 and 1 sun illumination. These amounts of CO were an order of magnitude greater than control surfaces, producing 5.59 × 10 –7 mol CO/h for Re(az-phen) and 7.83 × 10 –7 mol CO/h for Mn(az-phen) films. Much of the charge passed at the pSi electrodes was consumed by the competing hydrogen evolution reaction, which we attribute to the low molecular coverage and the presence of native oxide on the electrode surface after attachment. Finally, this work demonstrates the feasibility of reacting azide-containing ligands with Si surfaces. Still, it highlights the need for alternative ligand structures and reaction conditions to form multilayer films.

azides↗
DOE OSTI2025

Mechanistic Insights into Visible-Light-Induced ATRA Reactions Powered by the Symbiotic Relationship between Cu(II)/Cu(I) Phenanthroline Complexes

As photoredox catalysis continues to yield promising chemical transformations, there is an increased need to understand how specific photocatalysts function to improve reaction efficiencies while expanding their scope. Copper-phenanthroline-based photocatalysts such as Cu II (dap)Cl 2 (dap = 2,9-di(p-anisyl)-1,10-phenanthroline) and [Cu I (dap) 2 ]Cl were both found to be equally capable of olefin activation through electrophilic atom transfer radical addition (ATRA) reactions. Although these molecular catalysts have proven successful, many intermediates suggested in the proposed catalytic cycles have never been detected. One undetermined aspect in this chemistry is related to how one equivalent of Cu II (dap)Cl 2 generates half of an equivalent of [Cu I (dap) 2 ] + during the photocatalytic sequence. To this end, we initially used more synthetically accessible model systems, namely, [Cu I (dpp) 2 ]Cl and Cu II (dpp)Cl 2 (dpp = 2,9-diphenyl-1,10-phenanthroline), to glean detailed mechanistic insights into this unusual symbiotic relationship. We directly detected several intermediates involved in the ATRA photocatalytic cycle using these model chromophores in conjunction with electronic spectroscopy, infrared matrix-assisted laser desorption electrospray ionization (IR-MALDESI) mass spectrometry, electronic structure calculations, EPR spin-trap experiments, and 1 H NMR spectroscopy. We found that the unique ligand lability and coordinating properties of acetonitrile enable both the in situ oxidation of [Cu I (dpp) 2 ] + by tosyl chloride into Cu II (dpp)Cl 2 and the visible-light-induced homolysis of the Cu II –Cl bond, which initiates the conversion to the Cu I species [Cu I (dpp) 2 ][Cu I Cl 2 ]. Here, the combined findings from the present study of the catalytic cycle demonstrate that the symbiotic relationship between Cu II (dpp)Cl 2 and [Cu I (dpp) 2 ] + , as well as between Cu II (dap)Cl 2 and [Cu I (dap) 2 ] + , is the critical factor enabling the ATRA photoreaction by departing from either photocatalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Structural Gating Enhances Long-Distance Light-Driven Interfacial Electron Transfer

Structural gating provides a molecular means to transfer electrons preferentially in one desired vectorial direction, a behavior needed for applications in artificial photosynthesis. At the interfaces utilized herein, visible-light absorption by a transition metal complex opens a “structural gate” by planarization of otherwise rotating phenyl rings in p-phenylene ethynylene (PE) bridge units. Planarization provides a conjugated pathway for electron flow toward a conductive oxide surface. Interfacial electron transfer to the oxide restores rotation and closes the gate to the unwanted recombination reaction. This structural gating results in nearly quantitative long-distance (>20 Å) interfacial electron transfer that occurs ~1000 times faster than transfer in the opposite direction. A comparative kinetic study of these complexes with those that contain ionic bridge units, without gating function, as a function of the applied potential and hence –ΔG° provided a physical basis for the structural gating. A small distance-dependent reorganization energy with weak electronic coupling underlies the success of this gate that enables efficient long-distance electron transfer and slow recombination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Coupling of Nondegenerate Topological Modes in Nitrogen Core-Doped Graphene Nanoribbons

Nitrogen core-doping of graphene nanoribbons (GNRs) allows trigonal planar carbon atoms along the backbone of GNRs to be substituted by higher-valency nitrogen atoms. The excess valence electrons are injected into the π-orbital system of the GNR, thereby changing not only its electronic occupation but also its topological properties. We have observed this topological change by synthesizing dilute nitrogen core-doped armchair GNRs with a width of five atoms (N 2 -5-AGNRs). The incorporation of pairs of trigonal planar nitrogen atoms results in the emergence of topological boundary states at the interface between doped and undoped segments of the GNR. These topological boundary states are offset in energy by approximately ΔE = 300 meV relative to the topological end states at the termini of finite 5-AGNRs. Scanning tunneling microscopy (STM) and spectroscopy (STS) reveal that for finite GNRs the two types of topological states can interact through a linear combination of orbitals, resulting in a pair of asymmetric hybridized states. This behavior is captured by an effective Hamiltonian of nondegenerate diatomic molecules, where the analogous interatomic hybridization interaction strength is tuned by the distance between GNR topological modes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Orbital Engineering Band Degeneracy in a Dual-Square Carbon-Oxide Framework

Electron band degeneracies in momentum space give rise to exotic quantum phenomena that have sparked intense interest in condensed matter physics and materials science. Nodal-lines─isolines in k-space formed by the incidental touching of two bands that share the same energy but belong to discrete eigenstates─arise in the presence of symmetries that preclude effective hybridization. Despite recent advances in the design, bottom-up assembly, and engineering of exotic electronic states in graphene nanomaterials, the extension of this approach to access synthetic two-dimensional (2D) quantum materials derived from metal- or covalent-organic frameworks (COFs) has lagged behind. Here we present a molecular orbital engineering approach for designing and fabricating an edge-centered dual square lattice within a π-conjugated 2D-tetraoxa[8]circulene (2D-TOC) COF. First-principles calculations and scanning tunnelling spectroscopy reveal the emergence of Frontier states at the center of a 3 × 3 lattice that give rise to Dirac nodal-lines in 2D-TOC. Our findings not only provide a general guide for the design of conjugated COFs with custom tailored electronic properties from molecular fragments but enable the exploration of emergent topological phenomena in synthetic 2D materials with potential application for high-speed, low-power data processing, transmission, and storage.

Dirac nodal line semimetal↗
DOE OSTI2024

Paratellurite Nanowires as a Versatile Material for THz Phonon Polaritons

Polaritons, i.e., hybrid quasi-particles of light and matter resonances, have been extensively investigated due to their potential to enhance light-matter interactions. Although polaritonic applications thrive in the mid-infrared range, their extension to the terahertz (THz) range remains limited. Here, we present paratellurite (α-TeO 2 ) nanowires, a versatile material acting as a platform for different types of phonon polaritons. Utilizing synchrotron infrared nanospectroscopy from 10 to 24 THz, we uncover the polaritonic properties of α-TeO 2 nanowires, showcasing their dual functionality as both a Fabry-Pérot cavity and a waveguide for surface phonon polaritons. Furthermore, near-field measurements with a free-electron laser as a THz source reveal a localized optical contrast down to 5.5 THz, an indication of hyperbolic bands. In conclusion, our findings complement the repertoire of polaritonic materials, with significant implications for advancing THz technologies.

36 MATERIALS SCIENCE↗